Which of the following is/ are a method of propagation?
I. Cutting
II. Layering
III. Grafting
IV. Inarching
V. Budding
Correct code is -
a. I, II, and III only
b. II, III and IV only
c. III, IV and V only
d. I, II, III, IV and V

1 Answer

Answer :

d. I, II, III, IV and V

Related questions

Description : Aonla is commercially propagated by • Patch budding • Cutting Air • layering • Wedge grafting

Last Answer : • Patch budding

Description : Inarching is also called as a. cutting b. Budding c. approach grafting d. non of these

Last Answer : approach grafting

Description : Asexually apple rootstocks is raised by a. Grafting b. Budding c. Stooling d. Layering

Last Answer : Stooling

Description : Litchi is commercially propagated by — a. Cutting b. Air Layering c. Grafting d. Seed

Last Answer : b. Air Layering

Description : Papaya is commercially propagated by — a. Cutting b. Layering c. Grafting d. Seed

Last Answer : d. Seed

Description : Artificial methods of reproduction do not include a) Rhizome b) cutting c) layering d) budding

Last Answer : a) Rhizome

Description : A low branch with a node is bent down and covered with soil in a) Marcotting b) Layering c)Cutting d) Budding

Last Answer : b) Layering

Description : Which of the following crops are grown in Rabi as well as in Kharif season - I. Jowar II. Maize III. Urad (Black gram) IV. Moong (Green gram) V. Groundnut Correct code is - a. Only II, III and IV b. Only I, II and IV c. Only IV d. I, II, III, IV, V all

Last Answer : d. I, II, III, IV, V all

Description : Which of the following techniques ar used to create transgenic crops? a. Budding and Grafting in fruit plants b. Cytoplasmic male sterility c. Gene slicing d. Only 1 e. Both 1 and 2 f. Both 2 and 3 g. Both 1 and 3

Last Answer : f. Both 2 and 3

Description : $ Air layering is performed in those plants which have many, long flexible branches near the soil level. ! Layering method of vegetative propagation i

Last Answer : $ Air layering is performed in those plants which have many, long flexible branches near the soil level. ! ... wrong D. If both As and R are wrong.

Description : Which of the following is/ are sustainable agricultural practices? I. Mixed Cropping II. Crop Rotation III. Intercropping IV. Integrated farming Correct code is - a. I, II and III only b. II, III and IV only c. I, III, and IV only d. I, II, III and IV all

Last Answer : d. I, II, III and IV all

Description : Sustainability of agriculture is about - I. What we grow - biodiversity rich and nature friendly II. Who grows - Local food for livelihood security III. How we grow - Less incentive and less toxic IV. What we eat - Less ... Only I b. Only I and III c. Only III and IV d. All I, II, III and IV

Last Answer : d. All I, II, III and IV

Description : Explain the following: (i) The propagation of rubber by the bud. grafting method.. -Geography

Last Answer : (i) Bud grafting: This is done by the insertion of a strip of bark containing a bud from high yielding clones under the bark of young seedling about 5 cm high till they become united in 3 to ... are 15 to 20 cm tall they are carefully unrooted in bunches and replanted in rows in the flooded fields.

Description : Explain the following: The propagation of rubber by the bud grafting method. -SST 10th

Last Answer : (i) Budgrafting is done by the insertion of a strip of bark containing a bud from highyielding clones under the bark of a young seedling till they become united in 3-4 weeks. The old ... and replanted in parallel rows at regular intervals in flooded fields and left to grow till they mature.

Description : Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Last Answer : (i) Gear Tooth : Form milling cutter, Cylindrical type or End mill type, Gear cutter. (ii) Parting off: Slitting Cutter (iii) Keyway : Staggered teeth side milling cutter, End mill cutter, key ... milling cutter. Selection of a cutter depends upon type and size of slot or groove to be produced. 

Description : Write type of chip formed with following factors. (i) High rake angle (ii) High cutting speed (iii) Small depth of cut (iv) Low cutting speed (v) Large depth of cut (vi) Low rake angle

Last Answer : (i) High rake angle : Continuous chips (ii) High cutting speed : Continuous chips (iii) Small depth of cut : Continuous chips (iv) Low cutting speed :Continuous chips with built up edge (v) ... cut : Continuous chips with built up edge (vi) Low rake angle :Continuous chips with built up edge

Description : Explain the following methods of propagation and name the crop associated with each : (i) bud grafting (ii) ratoon cropping -Geography

Last Answer : (i) Bud grafting-It is associated with rubber crop. This method is done by the insertion of a strip of bark containing a bud from high yielding clones under a bark of a young seedling about 5 cm ... After the crop has been cut the stem begins to grow again and produces a second crop called ratoon.

Description : Select the correct order for the different phases of virus execution. i) Propagation phase ii) Dormant phase iii) Execution phase iv) Triggering phase A) i, ii, iii, and iv B) i, iii, ii and iv s D) ii, iii, iv and i

Last Answer : C) ii, i, iv an iii

Description : Inarching method is used for culture of which fruits crops (a) Mango and Guava (b) Mango and Grapes (c) Guava and Litchi (d) Phalsa and Guava

Last Answer : (a) Mango and Guava

Description : Rubber plant can be propagated through: a. Aerial layering b. Cutting c. All above d. None of above

Last Answer : All above

Description : Stooling is also called as a. Sexual propagatiobn b. Cutting c. Gooti layering d. Mound layering

Last Answer : Mound layering

Description : Artificial methods of vegetative propagation includes a) Cloning b) grafting c) cuttings d) both b and cn

Last Answer :  d) both b and cnswe

Description : Explain the effect of the following engine variables on ignition lag and flame propagation: (i) cylinder size (ii) cylinder wall temperature (iii) compression ratio and (iv) inlet air temperature

Last Answer : (i) Cylinder size - Engine of similar design generally run at the same speed. This is achieved by smaller engine having larger RPM and larger engines having smaller RPM. Due to the same ... all reduces the ignition lag. Pre-increase in the intake temperature and pressure increases the flame speed.

Description : Compare sky wave and space wave propagation w.r.t. following points. (i) Frequency range (ii) Effect of fading (iii)Polarization (iv)Application

Last Answer : Sr. No  Parameters Sky Wave Propagation Space Wave Propagation 1 Frequency range 3 MHz to 30 MHz  Above 30 MHz 2 Effect of fading Problem of fading is ... horizontally Polarized 4 Application RadioBroadcasting (SW Range) Used for TV and FM broadcasting

Description : Define following terms related to logic families : (i) Noise Margin (ii) FAN-OUT (iii) Propagation delay (iv) Power dissipation

Last Answer : i) Noise immunity is measured in terms of noise margin. High state Noise margin = VNH = VOH(min) - VIH(min) Low state Noise margin = VNL = VIL(max) - VOL(max) i) The fan-out is defined as the ... logical 0 state (HIGH to LOW) iii) Average power dissipation is defined as PD(avg) = ICC(avg) * VCC

Description : Which can be a method of privatisation ? i. Disinvestment ii. Denationalisation iii. Purchasing Share iv. Takeover v. Merger

Last Answer : i. Disinvestment

Description : Which of the following terms is associated with Dairying? I. Pasturisation II. Homogenisation III. Cream Neutralisation Correct code is a. Only I b. Only I and II c. I, II and III all d. Only II and III

Last Answer : c. I, II and III all

Description : Which of the following statement/s are ALWAYS FALSE ? (i) The sun will not rise in the East some day. (ii) A wooden table is not a table. (iii) Delhi city will be drowned under water. (iv) Cars run on water as fuel. ... i), (iii) and (iv) (B) Only (iii) (C) (i), (ii) and (iii) (D) (ii) alone

Last Answer : (D) (ii) alone

Description : Papaya is still being commercially propagated from a. Cutting b. Suckers c. Seeds d. Grafting

Last Answer : Seeds

Description : Draw conventional symbols for i) Compound wall ii) Pucca Building iii) Cutting iv) Embankment

Last Answer : i) Compound wall ii) Pucca Building iii) Cutting iv) Embankment

Description : Draw conventional symbol for: i. Cutting ii. Road with bridge iii. Orchard iv. river

Last Answer : conventional symbol for: i. Cutting ii. Road with bridge iii. Orchard iv. river

Description : The remedies to soil erosion are : I. Contour bunding II. Regulation of land use III. Cutting of trees IV. Allowing grazing of animals (1) I, III (2) I, II (3) III, IV (4) II, III

Last Answer :  I, II

Description : I have some matchsticks set up like this: I + XI = X. If you do not know Roman numerals, here is a quick starter: I=1 II=2 III=3 IV=4 V=5 VI=6 VII=7 VIII=8 IX=9 X=10 XI=11 ... are told to move the minimum number of matchsticks to make the question correct. So, how many do you have to move? -Riddles

Last Answer : Most people would get to one move at the least, but the real answer is zero moves. If you rotate the whole question around 180 degrees, it will display this: X = IX + I

Description : Match the following organisms with the products they produce. (A) Lactobacillus (i) Cheese (B) Saccharomyces (ii) Curd cerevisiae (C) Aspergillus niger (iii) Citric acid (D) Acetobacter aceti (iv) Bread (v) Acetic acid Select the correct ... v) (iii) (c) (ii) (iv) (iii) (v) (d) (iii) (iv) (v) (i)

Last Answer : c) (ii) (iv) (iii) (v)

Description : Match the following hormones with their respective disease. (A) Insulin (i) Addison's disease (B) Thyroxin (ii) Diabetes insipidus (C) Corticoids (iii)Acromegaly (D) Growth hormone (iv) Goitre (v) Diabetes mellitus Select the correct option ... (iii) (c) (ii) (iv) (iii) (i) (d) (v) (iv) (i) (iii)

Last Answer : (d) (v) (iv) (i) (iii

Description : Match the items given in column I with those in column II and select the correct option given below. Column I Column II (Function) (Part of excretory system) A. Ultrafiltration (i) Henle's loop B. Concentration (ii) Ureter of urine C. ... (ii) (iii) (c) (v) (iv) (i) (ii) (d) (v) (iv) (i) (iii)

Last Answer : (b) (iv) (i) (ii) (iii)

Description : Match the column - I with column - II. Column-I Column-II (A) P-wave (i) Depolarisation of ventricles (B) QRS complex (ii) Repolarisation of ventricles (C) T-wave (iii) Coronary ischaemia (D) Reduction in the size of T- wave (iv) ... ) (i) (ii) (iii) (c) (iv) (i) (ii) (v) (d) (ii) (i) (v) (iii)

Last Answer : (b) (iv) (i) (ii) (iii)

Description : Select the correct option. Column I Column II A. Synapsis aligns (i) Anaphase II homologous chromosomes B. Synthesis of (ii) Zygotene RNA and protein C. Action of enzyme (iii)G2-phase recombinase D. Centromeres do (iv) Anaphase I not ... ), C-(iii), D-(iv) (d) A-(ii), B-(iii), C-(v), D-(iv)

Last Answer : (d) A-(ii), B-(iii), C-(v), D-(iv)

Description : Identify the components labelled A, B, C and D in the diagram below from the list (i) to (viii) given along with Components : (i) Cristae of mitochondria (ii) Inner membrane of mitochondria (iii) Cytoplasm (iv) Smooth endoplasmic ... viii) (vi) (c) (vi) (v) (iv) (vii) (d) (v) (i) (iii) (ii)

Last Answer : (a) (v) (iv) (viii) (iii)

Description : Match List-I (Type of Unemployment) with List-II (Characteristics) and select the correct answer using the codes given below: L ist-I L ist -I I (Type of (Char acter ist ics) Unem ... contribution by the additional labour is nil E. Cyclical V. Job opportunities during certain months in the year

Last Answer : (1) A-V, B-III, C-IV, D-II, E-I

Description : Part IX of the Indian constitution which deals with ‘The Panchayats’, does not apply to which of the following states:(Agriculture MCQ) I. Arunachal Pradesh II. Nagaland III. Mizoram IV. Meghalaya a. Both II and III b. II, III and IV c. Only I d. Only II

Last Answer : b. II, III and IV

Description : In cutting method of vegetative propagation, cuttings are mainly taken from a) Leaves of parent plant b) Roots or stems of parent plant c) Shoots of parent plant d) Buds of parent plant

Last Answer : b) Roots or stems of parent plant

Description : Exit Criteria may consist of :- i. Thoroughness measures , such as coverage of code, functionality or risk ii. Estimates of Defect density or reliability measures. iii. Residual risk such as defects not fixed or ... correct and i,ii,iii are incorrect d) iii and iv are correct and i,ii are incorrect

Last Answer : b) i,ii,iii is correct and iv is incorrect