Description : Yield of pitch from distillation of high temperature tar is around __________ percent. (A) 10 (B) 25 (C) 65 (D) 90
Last Answer : (C) 65
Description : Pitch (a product of coal tar distillation) is always mixed with creosote oil, when it is to be burnt in a burner, because (A) Its calorific value is very less (B) Tar neutralises the residual acids ... for its transportation through pipelines at economic pressure drop (D) All (A), (B) and (C)
Last Answer : (C) It reduces viscosity and imparts fluidity for its transportation through pipelines at economic pressure drop
Description : Sucrose content in cane sugar may be around __________ percent. (A) 50 (B) 70 (C) 95 (D) 80
Last Answer : (C) 95
Description : Nitrogen content of urea is about __________ percent. (A) 10 (B) 46 (C) 80 (D) 94
Last Answer : (B) 46
Description : Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80
Last Answer : (B) 35 to 45
Description : Average sulphur content in Indian pyrites is about __________ percent. (A) 15 (B) 35 (C) 55 (D) 70
Last Answer : (B) 35
Description : Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270
Last Answer : (A) 80-170
Description : In low temperature carbonisation of coal as compared to high temperature carbonisation __________ produced is less. (A) Difference in gross & net calorific value of the coke oven gas (B) Free carbon content in tar (C) Yield percentage of coke (D) Yield of ammonia present in coke oven gas
Last Answer : (A) Difference in gross & net calorific value of the coke oven gas
Description : Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75
Description : Of the total tar present in raw coke oven gas, the tar recovered in primary cooler is about __________ percent. (A) 5 (B) 25 (C) 55 (D) 75
Last Answer : (B) 25
Description : Abrasion index of blast furnace coke should be around __________ percent. (A) 20 (B) 35 (C) 55 (D) 80
Last Answer : (D) 80
Description : Shatter index of metallurgical coke on 2 inches and 0.5 inch screen should be respectively around __________ percent. (A) 80 and 97 (B) 95 and 100 (C) 40 and 70 (D) 25 and 97
Last Answer : (A) 80 and 97
Description : Which of the following is not used as a binder in coal briquetting? (A) Tar (B) Molasses (C) Pitch (D) Line
Last Answer : (D) Line
Description : Coal tar fuel - 200 (CTF 200) is a mixture of (A) Pitch and creosote oil (B) Light oil and pitch (C) Anthracene and crecosote oil (D) Solar oil and pitch
Last Answer : (A) Pitch and creosote oil
Description : Tar yield in the low temperature and high temperature carbonisation of dry coal may be respectively __________ percent. (A) 3 & 10 (B) 10 & 3 (C) 10 & 20 (D) 15 & 8
Last Answer : (B) 10 & 3
Description : The yield of tar from high temperature carbonisation of dry coal is about __________ percent. (A) 3 (B) 12 (C) 22 (D) 0.3
Last Answer : (A) 3
Description : The terminology 'BTX' used in coal tar distillation industry refers to (A) Benzol-toluol-xylol (B) Benzol-toluene-xylene (C) Benzene-toluol-xylol (D) Benzene-toluene-xylene
Last Answer : (D) Benzene-toluene-xylene
Description : Which of the following is not a product of coal tar distillation? (A) Anthracene (B) Creosote oil (C) Carbolic oil (D) None of these
Last Answer : (D) None of these
Description : Dowtherm is a (A) High temperature heating medium (a petroleum product) (B) Product of coal tar distillation (C) Very heat sensitive material (D) None of these
Last Answer : Option A
Description : Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro
Last Answer : (A) Gives higher yield of petrol
Description : Which of the following fractions of coal-tar distillation contains naphthalene? (a) Light oil (b) Middle oil (c) Heavy oil (d) Anthracene oil
Last Answer : Middle oil
Description : Which of the following fractions of coal-tar distillation contains benzene? (a) Light oil (b) Middle oil (c) Heavy oil (d) Anthracene oil
Last Answer : Light oil
Description : Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2
Last Answer : (B) 0.35 to 0.45
Description : Carbon Content by weight in air dried wood may be about __________ percent. (A) 10 (B) 25 (C) 50 (D) 80
Last Answer : (C) 50
Description : Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent. (A) 6 (B) 12 (C) 18 (D) 24
Last Answer : (D) 24
Description : Flash point of atmospheric distillation residue is determined by __________ apparatus. (A) Pensky-Martens (closed cup type) (B) Abel (C) Cleveland (open cup type) (D) None of these
Last Answer : (C) Cleveland (open cup type)
Description : Biological value of egg proteins is about (A) 70 % (B) 80 % (C) 86 % (D) 94 %
Last Answer : Answer : D
Description : When sale is Rs. 4,80,000, gross loss is 25% on cost, purchase is Rs. 3,50,000 and closing stock is Rs. 60,000, the stock in the beginning would be– (A) Rs. 70,000 (B) Rs. 94,000 (C) Rs. 1,34,000 (D) Rs. 3,50,000
Last Answer : Answer: Rs. 3,50,000
Description : A natural draft cooling tower is filled with wooden grids, which covers about __________ percent of the tower height. (A) 10-15 (B) 30-40 (C) 70-80 (D) 90-100
Last Answer : (A) 10-15
Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70
Last Answer : (B) 25-30
Description : In producer gas making furnace, steam is added along with air to mainly control the (A) Fusion of coal ash & clinker formation (B) C. V. of producer gas (C) Temperature of producer gas (D) Tar content in producer gas
Last Answer : (A) Fusion of coal ash & clinker formation
Description : In high temperature carbonisation (as compared to low temperature carbonisation) of coal, the (A) Gas yield is less (B) Tar yield is more (C) Ignition temperature of coke produced is less (D) Aromatic content of tar produced is more
Last Answer : (D) Aromatic content of tar produced is more
Description : Coal tar fuels (CTF) as compared to petroleum based fuel oils have higher (A) Calorific value (B) Higher C/H ratio (C) Sulphur content (D) Difference in gross & net calorific value
Last Answer : (B) Higher C/H ratio
Description : . A coal having high volatile matter content will (A) Give less yield of tar and gas on carbonisation (B) Burn with a small non-smoky flame (C) Have a very high calorific value (D) None of these
Description : In high temperature carbonisation of coal compared to low temperature carbonisation (A) Yield of ammonia is less (B) Aromatic content of tar is low (C) H2 content in the coke oven gas is more (D) Calorific value of the coke oven gas is lower
Last Answer : (C) H2 content in the coke oven gas is more
Description : Fixed carbon in coal is defined as (A) That present in volatile matters (B) The total quantity of carbon present in the coal (C) Hundred minus the percentage of volatile matter, ash and moisture (D) The one which is present in the residue after combustion
Last Answer : (C) Hundred minus the percentage of volatile matter, ash and moisture
Description : P2O5 content in triple superphosphate is about __________ percent. (A) 42-50 (B) 15-20 (C) 85-90 (D) 70-75
Last Answer : (A) 42-50
Description : P2O5 content in superphosphate is about __________ percent. (A) 30-35 (B) 15-20 (C) 65-70 (D) 85-90
Last Answer : (B) 15-20
Description : In high temperature carbonisation (as compared to low temperature carbonisation) of coal (A) Coke oven gas yield is more (B) Tar yield is less but free carbon in tar is more (C) Calorific value of coke oven gas is less (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : In low temperature carbonisation (as compared to high temperature carbonisation) of coal (A) Ammonia yield is more (B) Aliphatic tar is produced (C) Free carbon in tar is more (D) All (A), (B) and (C
Last Answer : (B) Aliphatic tar is produced
Description : Coal tar is used as a (A) Binding material for coal briquettes (B) Fuel in rotary kiln (C) Binder in making carbon electrodes (D) All (A), (B) and (C)
Description : A distillation column with N plates is being operated under normal conditions. At some point of time, the operation is shifted to total reflux condition (i.e., no product and residue are ... and without total reflux (D) The top and bottom compositions correspond to the maximum enrichment available
Last Answer : (D) The top and bottom compositions correspond to the maximum enrichment available
Description : Nitrogen content of calcium ammonium nitrate (CAN) is __________ percent. (A) 10 (B) 25 (C) 50 (D) 80
Description : . Sucrose content in the raw juice extracted from sugar cane is about __________ percent (B) 15 - 20 (A) 1 - 2285 (C) 50 - 60 (D) 80 - 85
Last Answer : (B) 15 - 20
Description : Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95
Last Answer : (B) 50
Description : Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25
Last Answer : (B) 60-65
Description : White flue gas (resembling steam) coming out of the chimney of a thermal power plant indicates that the fuel used in the boiler furnace is (A) Tar (B) Coke oven gas (C) Pitch (D) Pulverised coke
Last Answer : (B) Coke oven gas
Description : Resorce requirement in project becomes constant while the project is in its _____ progress stage. (A) 40 to 55% (B) 55 to 70% (C) 70 to 80% (D) 80 to 95%
Last Answer : (D) 80 to 95%
Description : Resorce requirement in project becomes constant while the project is in its progress stage. (A) 40 to 55% (B) 55 to 70% (C) 70 to 80% (D) 80 to 95%
Description : Resource requirement in project becomes constant while the project is in its progress stage. A. 40 to 55% B. 55 to 70% C. 70 to 80% D. 80 to 95%
Last Answer : D. 80 to 95%