Which of the following fuels has the highest calorific value per unit
mass (kcal/kg)?
(A) Coal
(B) Kerosene
(C) Natural gas
(D) Furnace oil

1 Answer

Answer :

(D) Furnace oil

Related questions

Description : Which of the following gaseous fuels has the highest net calorific value (kcal/Nm3 )? (A) Producer gas (B) Carburetted water gas (C) Natural gas (D) Liquefied petroleum gas

Last Answer : (D) Liquefied petroleum gas

Description : Out of the following fuels, the difference between the net and gross calorific value is maximum in case of (A) Pitch (B) Fuel oil (C) Blast furnace gas (D) Bituminous coal

Last Answer : (B) Fuel oil

Description : Calorific value of furnace oil is about __________ Kcal/kg. (A) 10,000 (B) 15,000 (C) 5,000 (D) 20,000

Last Answer : (A) 10,000

Description : Among the fuels given below, the one with highest calorific value is – (1) Coke (2) Coal (3) Wood (4) Natural gas

Last Answer : (4) Natural gas Explanation: The calorific values of different fuels (in Kcal/kg) in dry state are: Wood: 3500; Coal: 4000-7000; Coke: 6500; and Natural Gas: 8600 Kcal/kg.

Description : Among the fuels given below, the one with highest calorific value is (1) Coke (2) Coal (3) Wood (4) Natural gas

Last Answer : Natural gas

Description : Which of the following has the least calorific value (kcal/Nm3 )? (A) Blast furnace gas (B) Coke oven gas (C) Sewage gas (D) Natural gas

Last Answer : (A) Blast furnace gas

Description : Out of the following fuels, the difference between gross and net calorific value will be minimum in case of (A) Coke oven gas (B) Water gas (C) Natural gas (D) Blast furnace gas

Last Answer : (D) Blast furnace gas

Description : Pick out the wrong statement. (A) High concentration of oxygen in flue gas means high stack loss (B) Gaseous fuels require the least % excess air for complete combustion (C) The ratio of fixed carbon to ... coal is called its 'fuel ratio' (D) Calorific value of natural gas is more than that of LPG

Last Answer : (D) Calorific value of natural gas is more than that of LPG

Description : Calorific value of pitch creosote mixture (PCM) i.e., C.T.F.-200 is about (A) 8800 kcal/m3 (B) 8800 kcal/kg (C) Same as that of coal middling (D) 25000 kcal/kg

Last Answer : (B) 8800 kcal/kg

Description : Calorific value of bituminous coal may be around __________ Kcal/kg. (A) 500 (B) 1500 (C) 6500 (D) 20000

Last Answer : (C) 6500

Description : Calorific value of a typical dry anthracite coal may be around __________ Kcal/kg. (A) 1000 (B) 4000 (C) 8000 (D) 15000

Last Answer : (C) 8000

Description : Which of the following has the highest calorific value (kcal/Nm3 )? (A) Carburetted water gas (B) Gobar gas (C) Natural gas (D) LPG

Last Answer : (D) LPG

Description : Which of the following gaseous fuels is likely to have the highest gross calorific value? (A) Sewage gas (B) LPG (C) Producer gas (D) Natural gas

Last Answer : (B) LPG

Description : Calorific value of coal middling generated in coal washeries during washing of coal may be around __________ Kcal/kg. (A) 1000 (B) 4000 (C) 6000 (D) 8000

Last Answer : (B) 4000

Description : Calorific value of blast furnace gas is around __________ KCal/Nm3 . (A) 850 (B) 1800 (C) 4200 (D) 6500

Last Answer : (A) 850

Description : Junker's calorimeter is used to determine the calorific value of (A) Pulverised coal (B) Gaseous fuels (C) Fuel oil (D) None of these

Last Answer : (B) Gaseous fuels

Description : Which of the following gaseous fuels has the lowest calorific value? (A) Gobar gas (B) Refinery gas (C) Converter gas (D) Blast furnace gas

Last Answer : (D) Blast furnace gas

Description : In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace,  producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 ... molten  steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )

Last Answer :  a) Specific Energy Consumption of Induction Melting Furnace  Molten Steel Production from the Induction melting furnace per day  = 100 x 88/100 = 88 TPD Total Energy Consumption of the Plant = 82400 kWh ... mark c) Total Energy consumption of Plant in ToE  = 655864000/107  = 65.586 ToE

Description : Calorific value of coke even gas produced by low temperature carbonisation of coal is about __________ Kcal/Nm3 . (A) 4000 (B) 2500 (C) 6500 (D) 10000

Last Answer : (C) 6500

Description : Pick out the wrong statement. (A) Percentage of ash in coke produced from medium coking coal is more than that in coal (B) The calorific value (kcal/Nm3 ) of coke oven gas reduces on ... plants in India at Talcher (Orissa) and Ramagundam (A.P) employ Kopper-Totzek process of coal gasification

Last Answer : (C) Ash is normally removed as 'fly-ash' in Kopper-Totzek process of coal gasification

Description : Which of the following has the highest gross calorific value? (A) Blast furnace gas (B) Coke oven gas (C) Carburetted water gas (D) Oil refinery gas

Last Answer : (D) Oil refinery gas

Description : For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3 ), while the C.V. is same on weight basis (i.e., kcal/kg)? (A) Propane and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F. gas and coke oven gas

Last Answer : (A) Propane and acetylene

Description : For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3) while the C.V. is same on weight basis (i.e., kcal/kg)? (A ... and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F gas and coke oven gas

Last Answer : D) B.F gas and coke oven gas

Description : Which of the following fuels is generally not used in thermal power plant boiler firing? (A) Furnace oil, light diesel oil and tar/PCM (B) Pulverised coking coal (C) Coal middling from washeries (D) B.F. gas, coke oven gas and L.D. converter gas

Last Answer : (B) Pulverised coking coal

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

Description : The calorific value of natural gas is about __________ kcal/Nm3 . (A) 10,000 (B) 2,500 (C) 25,000 (D) 35,000

Last Answer : (A) 10,000

Description : Which of the following fuel gases has the highest calorific value? (A) Natural gas (B) Coal bed methane (CBM) (C) Liquefied petroleum gas (LPG) (D) Sewage gas

Last Answer : (C) Liquefied petroleum gas (LPG)

Description : Hydrogen content in petroleum products varies from 12 to 15% (by weight). As a result the difference between gross and net heating value of petroleum fuels varies in the range of __________ kcal/kg. (A) 600-750 (B) 250-350 (C) 1000-1500 (D) 2000-2500

Last Answer : (A) 600-750

Description : Pick out the wrong statement. (A) Aromatics have higher specific gravity than paraffins (B) Gross calorific value (GCV) of petrofuels is equal to (12400 - 2100 ρ 2 ) where, ρ is the specific gravity ... volume basis (i.e., Kcal/litre) (D) Higher specific gravity of petrofuels means higher C/H ratio

Last Answer : (C) Heavier petrofuels have higher GCV on weight basis (i.e., Kcal/kg) but lower GCV on volume basis (i.e., Kcal/litre)

Description : Calorific value of dry wood may be around __________ Kcal/kg. (A) 5 (B) 50 (C) 500 (D) 5000

Last Answer : (A) 5

Description : Calorific value of tar is about __________ Kcal/kg. (A) 8800 (B) 12000 (C) 14000 (D) 16000

Last Answer : (A) 8800

Description : Coal tar fuels (CTF) as compared to petroleum based fuel oils have higher (A) Calorific value (B) Higher C/H ratio (C) Sulphur content (D) Difference in gross & net calorific value

Last Answer : (B) Higher C/H ratio

Description : Which one of the following gases has the highest calorific value? (1) Natural gas (2) Water gas (3) Coal gas (4) Indane gas

Last Answer : (4) Indane gas Explanation: The basic calorific value for solid and liquid fuels is the gross calorific value at constant volume and for gaseous fuels it is the gross calorific value at constant pressure. The ... Water gas: 4600-4800; and LPG (liquefied petroleum gas such as Indane): 11,900 Kcal/Kg.

Description : Which one of the following gases has the highest calorific value? (1) Natural gas (2)Water gas (3) Coal gas (4)Indane gas

Last Answer : Indane gas

Description : Which among the following has the highest flue gas loss on combustion due to Hydrogen in the fuel? a) natural gas b) furnace oil c) coal d) light diesel oil

Last Answer : a) natural gas

Description : Calorific value of high speed diesel is kcal/Kg (a) 9500 (b) 10550 (c) 11550 (d) 12500

Last Answer : (b) 10550

Description : The calorific value of HSD is — Kcal/kg a. 10000 b. 10550 c. 11100 d. 11650

Last Answer : b. 10550

Description : The calorific value is the highest out of the following for (A) Producer gas (B) Water gas (C) Coke oven gas (D) Blast furnace gas

Last Answer : (C) Coke oven gas

Description : Use of pulverised coal in boilers provides (A) Higher calorific value (B) Better combustion (C) Smokeless burning (D) Less erosion on furnace wall

Last Answer : (B) Better combustion

Description : Use of pulverised coal in boiler furnace provides (A) High calorific value (B) Better combustion (C) Smokeless burning (D) Less erosion on furnace walls

Last Answer : (B) Better combustion

Description : Which one of the following has highest calorific value? a) kerosene b)biogas c)LPG d)petrol

Last Answer : c)LPG

Description : If ……. has a future, then ultra-super critical boiler will be the key. a) Coal b) Fossil fuels c) Natural gas d) Oil

Last Answer : a) Coal

Description : Calorific value of wood gas is about __________ kcal/Nm3 . (A) 1500 (B) 3300 (C) 5400 (D) 8500

Last Answer : (B) 3300

Description : Calorific value of gobar gas (containing CH4 = 60% , H2 = 10% ; CO2 = 30%) may be about __________ Kcal/Nm3 . (A) 1,800 (B) 3,200 (C) 5,400 (D) 10,200

Last Answer : (C) 5,400

Description : The calorific value of L.D. converter gas is about __________ Kcal/Nm3 . (A) 1800 (B) 800 (C) 4500 (D) 10000

Last Answer : (A) 1800

Description : The calorific value of producer gas is around __________ kcal/Nm3 . (A) 1300 (B) 500 (C) 4500 (D) 9000

Last Answer : (A) 1300

Description : Calorific value of coke oven gas is around __________ Kcal/Nm3 . (A) 900 (B) 4200 (C) 7500 (D) 2000

Last Answer : (B) 4200

Description : Which of the following fuels causes minimum environmental pollution? (1) Kerosene (2) Diesel (3) Coal (4) Hydrogen

Last Answer : (4) Hydrogen Explanation: Most of environmental (air) pollution results from the burning of fossil fuels, such as coal, oil, natural gas, and gasoline to produce electricity and power. All these ... produces nothing but water vapor. It is therefore the cleanest possible as it doesn't produce CO2.

Description : Which of the following fuels causes minimum environmental pollution? (1) Diesel (2) Kerosene (3) Hydrogen (4) Coal

Last Answer : (3) Hydrogen

Description : Which of the following fuels causes minimum environmental pollution? (1) Diesel (2) Kerosene (3) Hydrogen (4) Coal

Last Answer : (3) Hydrogen Explanation: Coal, diesel and kerosene are examples of fossil fuels that contribute to pollution. In contrast, hydrogen burns in air, it produces nothing but water vapor and energy. It is considered as totally clean and nonpolluting source of energy.