Description : Optimum preheating temperature for pitch creosote mixture (PCM) which is also termed as C.T.F-200, before atomisation through burners is (A) 200 °F (B) 200 °C (C) 200 °K (D) 200 °R
Last Answer : (A) 200 °F
Description : Calorific value of coal middling generated in coal washeries during washing of coal may be around __________ Kcal/kg. (A) 1000 (B) 4000 (C) 6000 (D) 8000
Last Answer : (B) 4000
Description : Which of the following is not a by-product recovered in a high temperature coal carbonisation plant? (A) Benzol (B) Pitch-creosote mixture (PCM) (C) Naphthalene (D) Ethylene
Last Answer : (D) Ethylene
Description : Calorific value of tar is about __________ Kcal/kg. (A) 8800 (B) 12000 (C) 14000 (D) 16000
Last Answer : (A) 8800
Description : Pitch creosote mixture (PCM) as compared to furnace oil is a better fuel, because its (A) Emissivity factor is higher (B) Sulphur content is lower (C) Flue gas has lower dew point thereby facilitating more waste heat recovery (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Pitch (a product of coal tar distillation) is always mixed with creosote oil, when it is to be burnt in a burner, because (A) Its calorific value is very less (B) Tar neutralises the residual acids ... for its transportation through pipelines at economic pressure drop (D) All (A), (B) and (C)
Last Answer : (C) It reduces viscosity and imparts fluidity for its transportation through pipelines at economic pressure drop
Description : Coal tar fuel - 200 (CTF 200) is a mixture of (A) Pitch and creosote oil (B) Light oil and pitch (C) Anthracene and crecosote oil (D) Solar oil and pitch
Last Answer : (A) Pitch and creosote oil
Description : Which of the following fuels is generally not used in thermal power plant boiler firing? (A) Furnace oil, light diesel oil and tar/PCM (B) Pulverised coking coal (C) Coal middling from washeries (D) B.F. gas, coke oven gas and L.D. converter gas
Last Answer : (B) Pulverised coking coal
Description : For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3 ), while the C.V. is same on weight basis (i.e., kcal/kg)? (A) Propane and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F. gas and coke oven gas
Last Answer : (A) Propane and acetylene
Description : For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3) while the C.V. is same on weight basis (i.e., kcal/kg)? (A ... and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F gas and coke oven gas
Last Answer : D) B.F gas and coke oven gas
Description : Calorific value of bituminous coal may be around __________ Kcal/kg. (A) 500 (B) 1500 (C) 6500 (D) 20000
Last Answer : (C) 6500
Description : Which of the following fuels has the highest calorific value per unit mass (kcal/kg)? (A) Coal (B) Kerosene (C) Natural gas (D) Furnace oil
Last Answer : (D) Furnace oil
Description : Calorific value of a typical dry anthracite coal may be around __________ Kcal/kg. (A) 1000 (B) 4000 (C) 8000 (D) 15000
Last Answer : (C) 8000
Description : Pick out the wrong statement. (A) Aromatics have higher specific gravity than paraffins (B) Gross calorific value (GCV) of petrofuels is equal to (12400 - 2100 ρ 2 ) where, ρ is the specific gravity ... volume basis (i.e., Kcal/litre) (D) Higher specific gravity of petrofuels means higher C/H ratio
Last Answer : (C) Heavier petrofuels have higher GCV on weight basis (i.e., Kcal/kg) but lower GCV on volume basis (i.e., Kcal/litre)
Description : Calorific value of coke even gas produced by low temperature carbonisation of coal is about __________ Kcal/Nm3 . (A) 4000 (B) 2500 (C) 6500 (D) 10000
Description : Pick out the wrong statement. (A) Percentage of ash in coke produced from medium coking coal is more than that in coal (B) The calorific value (kcal/Nm3 ) of coke oven gas reduces on ... plants in India at Talcher (Orissa) and Ramagundam (A.P) employ Kopper-Totzek process of coal gasification
Last Answer : (C) Ash is normally removed as 'fly-ash' in Kopper-Totzek process of coal gasification
Description : Calorific value of furnace oil is about __________ Kcal/kg. (A) 10,000 (B) 15,000 (C) 5,000 (D) 20,000
Last Answer : (A) 10,000
Description : Calorific value of dry wood may be around __________ Kcal/kg. (A) 5 (B) 50 (C) 500 (D) 5000
Last Answer : (A) 5
Description : Calorific value of gobar gas (containing CH4 = 60% , H2 = 10% ; CO2 = 30%) may be about __________ Kcal/Nm3 . (A) 1,800 (B) 3,200 (C) 5,400 (D) 10,200
Last Answer : (C) 5,400
Description : Out of the following fuels, the difference between the net and gross calorific value is maximum in case of (A) Pitch (B) Fuel oil (C) Blast furnace gas (D) Bituminous coal
Last Answer : (B) Fuel oil
Description : Calorific value of high speed diesel is kcal/Kg (a) 9500 (b) 10550 (c) 11550 (d) 12500
Last Answer : (b) 10550
Description : The calorific value of HSD is — Kcal/kg a. 10000 b. 10550 c. 11100 d. 11650
Last Answer : b. 10550
Description : The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiller
Last Answer : kW/Ton of Refrigeration
Description : The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiLLER
Description : Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat ... (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000
Last Answer : 21600
Description : The benchmarking parameter for a vapour compression refrigeration system is a) kW / kg of refrigerant used b) kcal / m3 of chilled water c) BTU / Ton of Refrigeration d) kW / Ton of Refrigeration
Last Answer : d) kW / Ton of Refrigeration
Description : In coal washeries, three products namely the valuable product (i.e. clean/washed coal), discarded product (i.e. mineral matter) and an additional concentrated product called __________ is produced. (A) Concentrate (B) Tailing (C) Middling (D) None of these
Last Answer : (C) Middling
Description : Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75
Last Answer : (B) 35 to 45
Description : Heating value of coal is approximately (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg
Last Answer : Ans: C
Description : Heating value of coal is approximately in power plant (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg.
Last Answer : 5000-6500 kcal / kg
Description : Which of the following has the least calorific value (kcal/Nm3 )? (A) Blast furnace gas (B) Coke oven gas (C) Sewage gas (D) Natural gas
Last Answer : (A) Blast furnace gas
Description : Calorific value of wood gas is about __________ kcal/Nm3 . (A) 1500 (B) 3300 (C) 5400 (D) 8500
Last Answer : (B) 3300
Description : The calorific value of natural gas is about __________ kcal/Nm3 . (A) 10,000 (B) 2,500 (C) 25,000 (D) 35,000
Description : The calorific value of L.D. converter gas is about __________ Kcal/Nm3 . (A) 1800 (B) 800 (C) 4500 (D) 10000
Last Answer : (A) 1800
Description : The calorific value of producer gas is around __________ kcal/Nm3 . (A) 1300 (B) 500 (C) 4500 (D) 9000
Last Answer : (A) 1300
Description : Which of the following has the highest calorific value (kcal/Nm3 )? (A) Carburetted water gas (B) Gobar gas (C) Natural gas (D) LPG
Last Answer : (D) LPG
Description : The calorific value of 'LPG' (50% propane + 50% butane) is about __________ kcal/Nm3 . (A) 5000 (B) 25,000 (C) 10,000 (D) 15,000
Last Answer : (B) 25,000
Description : Which of the following gaseous fuels has the highest net calorific value (kcal/Nm3 )? (A) Producer gas (B) Carburetted water gas (C) Natural gas (D) Liquefied petroleum gas
Last Answer : (D) Liquefied petroleum gas
Description : Calorific value of coke oven gas is around __________ Kcal/Nm3 . (A) 900 (B) 4200 (C) 7500 (D) 2000
Last Answer : (B) 4200
Description : Calorific value of blast furnace gas is around __________ KCal/Nm3 . (A) 850 (B) 1800 (C) 4200 (D) 6500
Last Answer : (A) 850
Description : Which of the following is not a product of coal tar distillation? (A) Anthracene (B) Creosote oil (C) Carbolic oil (D) None of these
Last Answer : (D) None of these
Description : . An irreversible aqueous phase reaction, A + B → P, is carried out in an adiabatic mixed flow reactor. A feed containing 4kmole/m3 of each A and B enters the reactor at 8m3 /hr. If the temperature of ... be assumed to be independent of temperature and composition. (A) 190 (B) 290 (C) 390 (D) 490
Last Answer : (B) 290
Description : Bulk density of pulverised coal may be about __________ kg/m3 . (A) 100 (B) 500 (C) 1000 (D) 1500
Last Answer : (B) 500
Description : Bed pressure drop in an air fluidised bed of catalyst particles (ρp = 200 kg/m3, Dp = 0.05 cm) of 60 cm bed depth and bed porosity of 0.5 expressed in cm of water (manometer) is (A) 90 (B) 60 (C) 45 (D) 30
Last Answer : (B) 60
Description : Calorific value of alcohol is (A) 4 kcal/gm (B) 5.4 kcal/gm (C) 7 kcal/gm (D) 9 kcal/gm
Last Answer : Answer : C
Description : Calorific value of proteins as determined in a bomb calorimeter is (A) 4 kcal/gm (B) 4.8 kcal/gm (C) 5.4 kcal/gm (D) 5.8 kcal/gm
Description : The calorific value of lipid is (A) 4.0 Kcal/gm (B) 6.0 Kcal/gm (C) 9.0 Kcal/gm (D) 15 Kcal/gm
Description : Calorific value of lipids per gm is (A) 4 Kcal (B) 8 Kcal (C) 9 Kcal (D) None of these
Description : The calorific value of wheat is about (A) 2.5 kcal/gm (B) 3.5 kcal/gm (C) 4.5 kcal/gm (D) 5.5 kcal/gm
Last Answer : Answer : B
Description : Rate of heat release in a furnace, which is the measure of heat intensity, is defined as (A) kcal/hr/m3 combustion space (B) kcal/m3 combustion space (C) kcal/hr (D) None of these
Last Answer : (A) kcal/hr/m3 combustion space