Yield of charcoal in high temperature carbonisation of wood is about __________ percent. (A) 10 (B) 25 (C) 50 (D) 75

Yield of charcoal in high temperature carbonisation of wood is about
__________ percent.
(A) 10
(B) 25
(C) 50
(D) 75
by

1 Answer

Answer :

(B) 25
by

Related questions

Tar yield in the low temperature and high temperature carbonisation of dry coal may be respectively __________ percent. (A) 3 & 10 (B) 10 & 3 (C) 10 & 20 (D) 15 & 8

Description : Tar yield in the low temperature and high temperature carbonisation of dry coal may be respectively __________ percent. (A) 3 & 10 (B) 10 & 3 (C) 10 & 20 (D) 15 & 8

Last Answer : (B) 10 & 3

The yield of tar from high temperature carbonisation of dry coal is about __________ percent. (A) 3 (B) 12 (C) 22 (D) 0.3

Description : The yield of tar from high temperature carbonisation of dry coal is about __________ percent. (A) 3 (B) 12 (C) 22 (D) 0.3

Last Answer : (A) 3

High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ percent. (A) 5 to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80

Description : High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ ... to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80

Last Answer : (C) 45 to 50

. Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Description : . Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Last Answer : (B) < 10

In low temperature carbonisation of coal as compared to high temperature carbonisation __________ produced is less. (A) Difference in gross & net calorific value of the coke oven gas (B) Free carbon content in tar (C) Yield percentage of coke (D) Yield of ammonia present in coke oven gas

Description : In low temperature carbonisation of coal as compared to high temperature carbonisation __________ produced is less. (A) Difference in gross & net calorific value of the coke oven gas (B) Free carbon content in tar (C) Yield percentage of coke (D) Yield of ammonia present in coke oven gas

Last Answer : (A) Difference in gross & net calorific value of the coke oven gas

Yield of pitch from distillation of high temperature tar is around __________ percent. (A) 10 (B) 25 (C) 65 (D) 90

Description : Yield of pitch from distillation of high temperature tar is around __________ percent. (A) 10 (B) 25 (C) 65 (D) 90

Last Answer : (C) 65

Yield of coke oven gas in low temperature carbonisation of coal is about __________ Nm3 /ton of dry coal. (A) 60 (B) 160 (C) 500 (D) 750

Description : Yield of coke oven gas in low temperature carbonisation of coal is about __________ Nm3 /ton of dry coal. (A) 60 (B) 160 (C) 500 (D) 750

Last Answer : (B) 160

Carbon Content by weight in air dried wood may be about __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Description : Carbon Content by weight in air dried wood may be about __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Last Answer : (C) 50

For achieving maximum capacity of the ball mill, the ball charge should be equal to about __________ percent of the ball mill volume. (A) 10 (B) 25 (C) 50 (D) 75

Description : For achieving maximum capacity of the ball mill, the ball charge should be equal to about __________ percent of the ball mill volume. (A) 10 (B) 25 (C) 50 (D) 75

Last Answer : (C) 50

In high temperature carbonisation (as compared to low temperature carbonisation) of coal, the (A) Gas yield is less (B) Tar yield is more (C) Ignition temperature of coke produced is less (D) Aromatic content of tar produced is more

Description : In high temperature carbonisation (as compared to low temperature carbonisation) of coal, the (A) Gas yield is less (B) Tar yield is more (C) Ignition temperature of coke produced is less (D) Aromatic content of tar produced is more

Last Answer : (D) Aromatic content of tar produced is more

In high temperature carbonisation (as compared to low temperature carbonisation) of coal (A) Coke oven gas yield is more (B) Tar yield is less but free carbon in tar is more (C) Calorific value of coke oven gas is less (D) All (A), (B) and (C)

Description : In high temperature carbonisation (as compared to low temperature carbonisation) of coal (A) Coke oven gas yield is more (B) Tar yield is less but free carbon in tar is more (C) Calorific value of coke oven gas is less (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In low temperature carbonisation (as compared to high temperature carbonisation) of coal (A) Ammonia yield is more (B) Aliphatic tar is produced (C) Free carbon in tar is more (D) All (A), (B) and (C

Description : In low temperature carbonisation (as compared to high temperature carbonisation) of coal (A) Ammonia yield is more (B) Aliphatic tar is produced (C) Free carbon in tar is more (D) All (A), (B) and (C

Last Answer : (B) Aliphatic tar is produced

In high temperature carbonisation of coal compared to low temperature carbonisation (A) Yield of ammonia is less (B) Aromatic content of tar is low (C) H2 content in the coke oven gas is more (D) Calorific value of the coke oven gas is lower

Description : In high temperature carbonisation of coal compared to low temperature carbonisation (A) Yield of ammonia is less (B) Aromatic content of tar is low (C) H2 content in the coke oven gas is more (D) Calorific value of the coke oven gas is lower

Last Answer : (C) H2 content in the coke oven gas is more

Fussain (A) Is friable, charcoal like substance(B) Has highest fixed carbon and lowest volatile matter content of all the four banded components of coal (C) Is non-coking, but when blended with highly coking coal, controls its swelling and produces high strength coke on carbonisation (D) All (A), (B) and (C)

Description : Fussain (A) Is friable, charcoal like substance (B) Has highest fixed carbon and lowest volatile matter content of all the four banded components of coal (C) Is non-coking, but when blended with highly coking ... its swelling and produces high strength coke on carbonisation (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

With increases in carbonisation temperature (A) Coke even gas yield increases (B) Tar yield increases(C) Hydrogen percentage in the coke oven gas decreases(D) Methane percentage in the coke oven gas increases

Description : With increases in carbonisation temperature (A) Coke even gas yield increases (B) Tar yield increases (C) Hydrogen percentage in the coke oven gas decreases (D) Methane percentage in the coke oven gas increases

Last Answer : (A) Coke even gas yield increases

A coal having higher volatile matter content, has lower (A) Smoking tendency on burning (B) Coke oven gas yield on carbonisation (C) Chance of catching fire during storage in open space (D) Ignition temperature

Description : A coal having higher volatile matter content, has lower (A) Smoking tendency on burning (B) Coke oven gas yield on carbonisation (C) Chance of catching fire during storage in open space (D) Ignition temperature

Last Answer : (D) Ignition temperature

In low temperature carbonisation of coal, the(A) Yield of coke oven gas is 290 Nm3/ton dry coal(B) Volatile matter in coke is zero(C) Temperature maintained is 700°C(D) Yield of tar is about 3% of dry coal

Description : In low temperature carbonisation of coal, the (A) Yield of coke oven gas is 290 Nm3 /ton dry coal (B) Volatile matter in coke is zero (C) Temperature maintained is 700°C (D) Yield of tar is about 3% of dry coal

Last Answer : (C) Temperature maintained is 700°C

The yield of straight run LPG from crude oil is about __________ weight percent. (A) 20-25 (B) 1-1.5 (C) 10-15 (D) 0.1-0.2

Description : The yield of straight run LPG from crude oil is about __________ weight percent. (A) 20-25 (B) 1-1.5 (C) 10-15 (D) 0.1-0.2

Last Answer : (B) 1-1.5

Producer gas is obtained by  A. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast  B. carbonisation of bituminous coal  C. passing steam over incandescent coke  D. passing air and a large amount of steam over waste coal at about 650°C

Description : Producer gas is obtained by  A. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast  B. carbonisation of bituminous coal  C. passing steam over incandescent coke  D. passing air and a large amount of steam over waste coal at about 650°C

Last Answer : Answer: A

Producer gas is obtained by  A. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast  B. carbonisation of bituminous coal  C. passing steam over incandescent coke  D. passing air and a large amount of steam over waste coal at about 650°C

Description : Producer gas is obtained by  A. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast  B. carbonisation of bituminous coal  C. passing steam over incandescent coke  D. passing air and a large amount of steam over waste coal at about 650°C

Last Answer : Answer: A

Yield of elemental phosphorous from rock phosphate is about __________ percent. (A) 1-2 (B) 15-25 (C) 40-45 (D) 60-65

Description : Yield of elemental phosphorous from rock phosphate is about __________ percent. (A) 1-2 (B) 15-25 (C) 40-45 (D) 60-65

Last Answer : (B) 15-25

Heat penetration rate in narrow coke ovens in high temperature carbonisation of coal is around __________ cm/hr. (A) 2.5 (B) 0.5 (C) 10 (D) 20

Description : Heat penetration rate in narrow coke ovens in high temperature carbonisation of coal is around __________ cm/hr. (A) 2.5 (B) 0.5 (C) 10 (D) 20

Last Answer : (A) 2.5

Most chemical plants use an initial working capital amounting to 10- 20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant. (A) 30 (B) 50 (C) 75 (D) 95

Description : Most chemical plants use an initial working capital amounting to 10- 20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant. (A) 30 (B) 50 (C) 75 (D) 95

Last Answer : (B) 50

Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Description : Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Last Answer : (A) 85

In a shell and tube heat exchanger, the height of 25 percent cut baffles is equal to (where, D = inside diameter of shell). (A) 0.25 D (B) 0.50 D (C) 0.75 D

Description : In a shell and tube heat exchanger, the height of 25 percent cut baffles is equal to (where, D = inside diameter of shell). (A) 0.25 D (B) 0.50 D (C) 0.75 D

Last Answer : (C) 0.75 D

Preheating of coal charge for the coke ovens reduces the (A) Time of carbonisation (B) Yield of gas and tar(C) Fuel consumption in coking(D) All (A), (B) and (C)

Description : Preheating of coal charge for the coke ovens reduces the (A) Time of carbonisation (B) Yield of gas and tar (C) Fuel consumption in coking (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280

Description : Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280

Last Answer : (D) 250-280

Carbonisation of coal consists of  A. drying and crushing the coal to a fine powder  B. moulding the finely ground coal under pressure with or without a binding material  C. heating the wood with a limited supply of air to temperature not less than 280°C  D. none of the above

Description : Carbonisation of coal consists of  A. drying and crushing the coal to a fine powder  B. moulding the finely ground coal under pressure with or without a binding material  C. heating the wood with a limited supply of air to temperature not less than 280°C  D. none of the above

Last Answer : Answer: D

Wood charcoal is used for decolouration of sugar, because it __________ the coloured materials. (A) Adsorbs (B) Oxidises (C) Reduces (D) Converts

Description : Wood charcoal is used for decolouration of sugar, because it __________ the coloured materials. (A) Adsorbs (B) Oxidises (C) Reduces (D) Converts

Last Answer : (A) Adsorbs

Of the total tar present in raw coke oven gas, the tar recovered in primary cooler is about __________ percent. (A) 5 (B) 25 (C) 55 (D) 75

Description : Of the total tar present in raw coke oven gas, the tar recovered in primary cooler is about __________ percent. (A) 5 (B) 25 (C) 55 (D) 75

Last Answer : (B) 25

Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75

Description : Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75

Last Answer : (B) 35 to 45

In an isothermal process on an ideal gas, the pressure increases by 0.5 percent. The volume decreases by about __________ percent. (A) 0.25 (B) 0.5 (C) 0.75 (D) 1

Description : In an isothermal process on an ideal gas, the pressure increases by 0.5 percent. The volume decreases by about __________ percent. (A) 0.25 (B) 0.5 (C) 0.75 (D) 1

Last Answer : (B) 0.5

Cast iron contains __________ percent carbon. (A) 2.5 (B) 3.75 (C) 4.75 (D) 5.25

Description : Cast iron contains __________ percent carbon. (A) 2.5 (B) 3.75 (C) 4.75 (D) 5.25

Last Answer : Option A

Coking time in a commercial high temperature coal carbonisation plant is about __________ hours. (A) 6 (B) 18 (C) 28

Description : Coking time in a commercial high temperature coal carbonisation plant is about __________ hours. (A) 6 (B) 18 (C) 28

Last Answer : (B) 18

High temperature carbonisation of coal takes place at __________ °C. (A) 2000 (B) 600 (C) 1100 (D) 1600

Description : High temperature carbonisation of coal takes place at __________ °C. (A) 2000 (B) 600 (C) 1100 (D) 1600

Last Answer : (C) 1100

Quantity of coke oven gas produced by high temperature carbonisation of one ton of dry coal may be around __________ Nm3 . (A) 30 (B) 300 (C) 3,000 (D) 30,000

Description : Quantity of coke oven gas produced by high temperature carbonisation of one ton of dry coal may be around __________ Nm3 . (A) 30 (B) 300 (C) 3,000 (D) 30,000

Last Answer : (B) 300

High temperature carbonisation of coal takes place at __________ °C. (A) 2000 (B) 700 (C) 1100 (D) < 500

Description : High temperature carbonisation of coal takes place at __________ °C. (A) 2000 (B) 700 (C) 1100 (D) < 500

Last Answer : (C) 1100

Polycaprolactam (Nylon - 6) is produced by the condensation polymerisation of caprolactam at 240-280°C in which the conversion of caprolactam is about __________ percent. (A) 50 (B) 75 (C) 90 (D) 99

Description : Polycaprolactam (Nylon - 6) is produced by the condensation polymerisation of caprolactam at 240-280°C in which the conversion of caprolactam is about __________ percent. (A) 50 (B) 75 (C) 90 (D) 99

Last Answer : (C) 90

Grinding efficiency of a ball mill is of the order of __________ percent. (A) 1-5 (B) 40-50 (C) 75-80 (D) 90-95

Description : Grinding efficiency of a ball mill is of the order of __________ percent. (A) 1-5 (B) 40-50 (C) 75-80 (D) 90-95

Last Answer : (A) 1-5

Quantity of coke produced from metallurgical coal may be around __________ percent. (A) 30 (B) 50 (C) 75 (D) 95

Description : Quantity of coke produced from metallurgical coal may be around __________ percent. (A) 30 (B) 50 (C) 75 (D) 95

Last Answer : (C) 75

P2O5 content in triple superphosphate is about __________ percent. (A) 42-50 (B) 15-20 (C) 85-90 (D) 70-75

Description : P2O5 content in triple superphosphate is about __________ percent. (A) 42-50 (B) 15-20 (C) 85-90 (D) 70-75

Last Answer : (A) 42-50

Transmitted power remaining the same, if supply voltage of a D.C. 2-wire feeder is increased 100 percent, saving in copper is (a) 25 percent (b) 50 percent (c) 75 percent (d) 100 percent

Description : Transmitted power remaining the same, if supply voltage of a D.C. 2-wire feeder is increased 100 percent, saving in copper is (a) 25 percent (b) 50 percent (c) 75 percent (d) 100 percent

Last Answer : (b) 50 percent

Milling a hundred pounds of wheat should yield ____ percent straight flour. a. 72 to 75 c. 88 to 90 b. 75 to 80 d. 68 to 70

Description : Milling a hundred pounds of wheat should yield ____ percent straight flour. a. 72 to 75 c. 88 to 90 b. 75 to 80 d. 68 to 70

Last Answer : a. 72 to 75

Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Last Answer : (B) 25-30

Nitrogen content of calcium ammonium nitrate (CAN) is __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Description : Nitrogen content of calcium ammonium nitrate (CAN) is __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Last Answer : (B) 25

Concentration of NaOH solution produced by mercury electrolytic cell is about __________ percent. (A) 10 (B) 25 (C) 50 (D) 98

Description : Concentration of NaOH solution produced by mercury electrolytic cell is about __________ percent. (A) 10 (B) 25 (C) 50 (D) 98

Last Answer : (C) 50

Concentration of NaOH solution produced by diaphragm electrolytic cell is about __________ percent. (A) 10 (B) 25 (C) 50 (D) 98

Description : Concentration of NaOH solution produced by diaphragm electrolytic cell is about __________ percent. (A) 10 (B) 25 (C) 50 (D) 98

Last Answer : (A) 10

A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. (A) 4 (B) 10 (C) 18 (D) 26

Description : A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. (A) 4 (B) 10 (C) 18 (D) 26

Last Answer : (B) 10

The temperature at which plastic layer formation takes place during carbonisation of coal varies from __________ °C. (A) 100 to 150 (B) 350 to 450 (C) 550 to 650 (D) 700 to 850

Description : The temperature at which plastic layer formation takes place during carbonisation of coal varies from __________ °C. (A) 100 to 150 (B) 350 to 450 (C) 550 to 650 (D) 700 to 850

Last Answer : (B) 350 to 450