Yield of pitch from distillation of high temperature tar is around __________ percent. (A) 10 (B) 25 (C) 65 (D) 90

Yield of pitch from distillation of high temperature tar is around
__________ percent.
(A) 10
(B) 25
(C) 65
(D) 90
by

1 Answer

Answer :

(C) 65
by

Related questions

Carbon content of pitch (residue of coal tar distillation) is around __________ percent. (A) 70 (B) 55(C) 80 (D) 94

Description : Carbon content of pitch (residue of coal tar distillation) is around __________ percent. (A) 70 (B) 55 (C) 80 (D) 94

Last Answer : (D) 94

Tar yield in the low temperature and high temperature carbonisation of dry coal may be respectively __________ percent. (A) 3 & 10 (B) 10 & 3 (C) 10 & 20 (D) 15 & 8

Description : Tar yield in the low temperature and high temperature carbonisation of dry coal may be respectively __________ percent. (A) 3 & 10 (B) 10 & 3 (C) 10 & 20 (D) 15 & 8

Last Answer : (B) 10 & 3

The yield of tar from high temperature carbonisation of dry coal is about __________ percent. (A) 3 (B) 12 (C) 22 (D) 0.3

Description : The yield of tar from high temperature carbonisation of dry coal is about __________ percent. (A) 3 (B) 12 (C) 22 (D) 0.3

Last Answer : (A) 3

Maximum thermal efficiency of boiler may be about __________ percent. (A) 10 (B) 25 (C) 65 (D) 90

Description : Maximum thermal efficiency of boiler may be about __________ percent. (A) 10 (B) 25 (C) 65 (D) 90

Last Answer : (D) 90

Pitch (a product of coal tar distillation) is always mixed with creosote oil, when it is to be burnt in a burner, because (A) Its calorific value is very less (B) Tar neutralises the residual acids present in pitch (C) It reduces viscosity and imparts fluidity for its transportation through pipelines at economic pressure drop (D) All (A), (B) and (C)

Description : Pitch (a product of coal tar distillation) is always mixed with creosote oil, when it is to be burnt in a burner, because (A) Its calorific value is very less (B) Tar neutralises the residual acids ... for its transportation through pipelines at economic pressure drop (D) All (A), (B) and (C)

Last Answer : (C) It reduces viscosity and imparts fluidity for its transportation through pipelines at economic pressure drop

Yield of elemental phosphorous from rock phosphate is about __________ percent. (A) 1-2 (B) 15-25 (C) 40-45 (D) 60-65

Description : Yield of elemental phosphorous from rock phosphate is about __________ percent. (A) 1-2 (B) 15-25 (C) 40-45 (D) 60-65

Last Answer : (B) 15-25

A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. (A) 4 (B) 10 (C) 18 (D) 26

Description : A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. (A) 4 (B) 10 (C) 18 (D) 26

Last Answer : (B) 10

Yield of charcoal in high temperature carbonisation of wood is about __________ percent. (A) 10 (B) 25 (C) 50 (D) 75

Description : Yield of charcoal in high temperature carbonisation of wood is about __________ percent. (A) 10 (B) 25 (C) 50 (D) 75

Last Answer : (B) 25

In low temperature carbonisation of coal as compared to high temperature carbonisation __________ produced is less. (A) Difference in gross & net calorific value of the coke oven gas (B) Free carbon content in tar (C) Yield percentage of coke (D) Yield of ammonia present in coke oven gas

Description : In low temperature carbonisation of coal as compared to high temperature carbonisation __________ produced is less. (A) Difference in gross & net calorific value of the coke oven gas (B) Free carbon content in tar (C) Yield percentage of coke (D) Yield of ammonia present in coke oven gas

Last Answer : (A) Difference in gross & net calorific value of the coke oven gas

A typical yield of diesel in straight run distillation of crude oil may be about __________ percent. (A) 8 (B) 18 (C) 28 (D) 35

Description : A typical yield of diesel in straight run distillation of crude oil may be about __________ percent. (A) 8 (B) 18 (C) 28 (D) 35

Last Answer : (A) 8

Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270

Description : Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270

Last Answer : (A) 80-170

Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Description : Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Last Answer : (A) 85

Of the total tar present in raw coke oven gas, the tar recovered in primary cooler is about __________ percent. (A) 5 (B) 25 (C) 55 (D) 75

Description : Of the total tar present in raw coke oven gas, the tar recovered in primary cooler is about __________ percent. (A) 5 (B) 25 (C) 55 (D) 75

Last Answer : (B) 25

Dowtherm is a (A) High temperature heating medium (a petroleum product) (B) Product of coal tar distillation (C) Very heat sensitive material (D) None of these

Description : Dowtherm is a (A) High temperature heating medium (a petroleum product) (B) Product of coal tar distillation (C) Very heat sensitive material (D) None of these

Last Answer : Option A

P2O5 content in superphosphate is about __________ percent. (A) 30-35 (B) 15-20 (C) 65-70 (D) 85-90

Description : P2O5 content in superphosphate is about __________ percent. (A) 30-35 (B) 15-20 (C) 65-70 (D) 85-90

Last Answer : (B) 15-20

In high temperature carbonisation (as compared to low temperature carbonisation) of coal, the (A) Gas yield is less (B) Tar yield is more (C) Ignition temperature of coke produced is less (D) Aromatic content of tar produced is more

Description : In high temperature carbonisation (as compared to low temperature carbonisation) of coal, the (A) Gas yield is less (B) Tar yield is more (C) Ignition temperature of coke produced is less (D) Aromatic content of tar produced is more

Last Answer : (D) Aromatic content of tar produced is more

In high temperature carbonisation (as compared to low temperature carbonisation) of coal (A) Coke oven gas yield is more (B) Tar yield is less but free carbon in tar is more (C) Calorific value of coke oven gas is less (D) All (A), (B) and (C)

Description : In high temperature carbonisation (as compared to low temperature carbonisation) of coal (A) Coke oven gas yield is more (B) Tar yield is less but free carbon in tar is more (C) Calorific value of coke oven gas is less (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In low temperature carbonisation (as compared to high temperature carbonisation) of coal (A) Ammonia yield is more (B) Aliphatic tar is produced (C) Free carbon in tar is more (D) All (A), (B) and (C

Description : In low temperature carbonisation (as compared to high temperature carbonisation) of coal (A) Ammonia yield is more (B) Aliphatic tar is produced (C) Free carbon in tar is more (D) All (A), (B) and (C

Last Answer : (B) Aliphatic tar is produced

In high temperature carbonisation of coal compared to low temperature carbonisation (A) Yield of ammonia is less (B) Aromatic content of tar is low (C) H2 content in the coke oven gas is more (D) Calorific value of the coke oven gas is lower

Description : In high temperature carbonisation of coal compared to low temperature carbonisation (A) Yield of ammonia is less (B) Aromatic content of tar is low (C) H2 content in the coke oven gas is more (D) Calorific value of the coke oven gas is lower

Last Answer : (C) H2 content in the coke oven gas is more

Naphtha yield in straight run distillation of crude oil may be about__________ percent.(A) 2(B) 6(C) 12(D) 18

Description : Naphtha yield in straight run distillation of crude oil may be about__________ percent. (A) 2 (B) 6 (C) 12 (D) 18

Last Answer : (B) 6

The yield of straight run LPG from crude oil is about __________ weight percent. (A) 20-25 (B) 1-1.5 (C) 10-15 (D) 0.1-0.2

Description : The yield of straight run LPG from crude oil is about __________ weight percent. (A) 20-25 (B) 1-1.5 (C) 10-15 (D) 0.1-0.2

Last Answer : (B) 1-1.5

Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Last Answer : (B) 25-30

Indian monazite sand contains __________ percent thorium. (A) 10 (B) 25 (C) 60 (D) 90

Description : Indian monazite sand contains __________ percent thorium. (A) 10 (B) 25 (C) 60 (D) 90

Last Answer : (A) 10

With increases in carbonisation temperature (A) Coke even gas yield increases (B) Tar yield increases(C) Hydrogen percentage in the coke oven gas decreases(D) Methane percentage in the coke oven gas increases

Description : With increases in carbonisation temperature (A) Coke even gas yield increases (B) Tar yield increases (C) Hydrogen percentage in the coke oven gas decreases (D) Methane percentage in the coke oven gas increases

Last Answer : (A) Coke even gas yield increases

In low temperature carbonisation of coal, the(A) Yield of coke oven gas is 290 Nm3/ton dry coal(B) Volatile matter in coke is zero(C) Temperature maintained is 700°C(D) Yield of tar is about 3% of dry coal

Description : In low temperature carbonisation of coal, the (A) Yield of coke oven gas is 290 Nm3 /ton dry coal (B) Volatile matter in coke is zero (C) Temperature maintained is 700°C (D) Yield of tar is about 3% of dry coal

Last Answer : (C) Temperature maintained is 700°C

Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Description : Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Last Answer : (B) 60-65

Thermal efficiency of a limestone calcination rotary kiln may be around __________ percent. (A) 20 (B) 40 (C) 65 (D) 80

Description : Thermal efficiency of a limestone calcination rotary kiln may be around __________ percent. (A) 20 (B) 40 (C) 65 (D) 80

Last Answer : (B) 40

150. Nitrogen content in ammonium sulphate (a fertiliser) is around __________ percent. (A) 5 (B) 20 (C) 50 (D) 65

Description : 150. Nitrogen content in ammonium sulphate (a fertiliser) is around __________ percent. (A) 5 (B) 20 (C) 50 (D) 65

Last Answer : (B) 20

. Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65 (D) 80

Description : . Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65 (D) 80

Last Answer : Option B

Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65

Description : Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65

Last Answer : Option B

Which of the following is not used as a binder in coal briquetting? (A) Tar (B) Molasses(C) Pitch(D) Line

Description : Which of the following is not used as a binder in coal briquetting? (A) Tar (B) Molasses (C) Pitch (D) Line

Last Answer : (D) Line

Coal tar fuel - 200 (CTF 200) is a mixture of (A) Pitch and creosote oil (B) Light oil and pitch (C) Anthracene and crecosote oil (D) Solar oil and pitch

Description : Coal tar fuel - 200 (CTF 200) is a mixture of (A) Pitch and creosote oil (B) Light oil and pitch (C) Anthracene and crecosote oil (D) Solar oil and pitch

Last Answer : (A) Pitch and creosote oil

White flue gas (resembling steam) coming out of the chimney of a thermal power plant indicates that the fuel used in the boiler furnace is (A) Tar (B) Coke oven gas (C) Pitch (D) Pulverised coke

Description : White flue gas (resembling steam) coming out of the chimney of a thermal power plant indicates that the fuel used in the boiler furnace is (A) Tar (B) Coke oven gas (C) Pitch (D) Pulverised coke

Last Answer : (B) Coke oven gas

The conversion of caprolactam in the above case is about __________ percent. (A) 25 (B) 50 (C) 70 (D) 90

Description : The conversion of caprolactam in the above case is about __________ percent. (A) 25 (B) 50 (C) 70 (D) 90

Last Answer : (D) 90

The terminology 'BTX' used in coal tar distillation industry refers to (A) Benzol-toluol-xylol (B) Benzol-toluene-xylene (C) Benzene-toluol-xylol (D) Benzene-toluene-xylene

Description : The terminology 'BTX' used in coal tar distillation industry refers to (A) Benzol-toluol-xylol (B) Benzol-toluene-xylene (C) Benzene-toluol-xylol (D) Benzene-toluene-xylene

Last Answer : (D) Benzene-toluene-xylene

Which of the following is not a product of coal tar distillation? (A) Anthracene (B) Creosote oil (C) Carbolic oil (D) None of these

Description : Which of the following is not a product of coal tar distillation? (A) Anthracene (B) Creosote oil (C) Carbolic oil (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point (C) Each ton of petroleum oil on distillation produces about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point

Initial pressure of oxygen introduced into the 'bomb' of the bomb calorimeter for determination of calorific value of coal/fuel oil may be around __________ atm. (A) 3-5 (B) 25-30 (C) 60-65 (D) 95-100

Description : Initial pressure of oxygen introduced into the 'bomb' of the bomb calorimeter for determination of calorific value of coal/fuel oil may be around __________ atm. (A) 3-5 (B) 25-30 (C) 60-65 (D) 95-100

Last Answer : (B) 25-30

Milling a hundred pounds of wheat should yield ____ percent straight flour. a. 72 to 75 c. 88 to 90 b. 75 to 80 d. 68 to 70

Description : Milling a hundred pounds of wheat should yield ____ percent straight flour. a. 72 to 75 c. 88 to 90 b. 75 to 80 d. 68 to 70

Last Answer : a. 72 to 75

Preheating of coal charge for the coke ovens reduces the (A) Time of carbonisation (B) Yield of gas and tar(C) Fuel consumption in coking(D) All (A), (B) and (C)

Description : Preheating of coal charge for the coke ovens reduces the (A) Time of carbonisation (B) Yield of gas and tar (C) Fuel consumption in coking (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ percent. (A) 5 to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80

Description : High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ ... to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80

Last Answer : (C) 45 to 50

. Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Description : . Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Last Answer : (B) < 10

Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Description : Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Last Answer : (B) 35 to 45

Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investment. (A) 10 to 20 (B) 20 to 40 (C) 45 to 60 (D) 65 to 75

Description : Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investment. (A) 10 to 20 (B) 20 to 40 (C) 45 to 60 (D) 65 to 75

Last Answer : (B) 20 to 40

The thermal efficiency of an air/fuel gas preheating recuperator may be as high as __________ percent. (A) 50 (B) 65 (C) 85 (D) 99

Description : The thermal efficiency of an air/fuel gas preheating recuperator may be as high as __________ percent. (A) 50 (B) 65 (C) 85 (D) 99

Last Answer : (C) 85

Which of the following fractions of coal-tar distillation contains naphthalene? (a) Light oil (b) Middle oil (c) Heavy oil (d) Anthracene oil

Description : Which of the following fractions of coal-tar distillation contains naphthalene? (a) Light oil (b) Middle oil (c) Heavy oil (d) Anthracene oil

Last Answer : Middle oil

Which of the following fractions of coal-tar distillation contains benzene? (a) Light oil (b) Middle oil (c) Heavy oil (d) Anthracene oil

Description : Which of the following fractions of coal-tar distillation contains benzene? (a) Light oil (b) Middle oil (c) Heavy oil (d) Anthracene oil

Last Answer : Light oil

On the average, what percent age of human body has the element of oxygen? (1) 65 (2) 25 (3) 10 (4) 5

Description : On the average, what percent age of human body has the element of oxygen? (1) 65 (2) 25 (3) 10 (4) 5

Last Answer : (1) 65 Explanation: This element is obviously the most important element in the human body. Oxygen atoms are present in water, which is the compound most common in the body, and other compounds ... . Oxygen plays a vital role in the breathing processes and in the metabolism of the living organisms.

Maximum viscosity of tar/PCM/fuel oil for easy and efficient atomisation in conventional burner is __________ centistokes (or 100 Redwood I seconds). (A) 5 (B) 25 (C) 50 (D) 100

Description : Maximum viscosity of tar/PCM/fuel oil for easy and efficient atomisation in conventional burner is __________ centistokes (or 100 Redwood I seconds). (A) 5 (B) 25 (C) 50 (D) 100

Last Answer : (B) 25