If the frequency spectrum of a signal has a bandwidth of500 Hz with thehighest frequency at 600 Hz, what shouldbe the samplingrate, according to the Nyquist theorem? A) 200 samples/s B) 500 samples/s C) 1000 samples/s D) 1200 samples/s

If the frequency spectrum of a signal has a bandwidth of500 Hz with thehighest frequency at 600 Hz, what shouldbe the samplingrate, according to
the Nyquist theorem?
A)
200 samples/s
B)
500 samples/s
C)
1000 samples/s
D)
1200 samples/s
by

1 Answer

Answer :

1200 samples/s
by

Related questions

The Nyquist theorem specifies the minimum samplingrate to be_______. A) equal to the lowest frequency of asignal B) equal to the highest frequency ofa signal C) twice thebandwidth of a signal D) twice thehighest frequencyof a signal

Description : The Nyquist theorem specifies the minimum samplingrate to be_______. A) equal to the lowest frequency of asignal B) equal to the highest frequency ofa signal C) twice thebandwidth of a signal D) twice thehighest frequencyof a signal

Last Answer : twice thehighest frequencyof a signal

In a four stroke I.C engine completing 3000rpm the natural frequency of vibration of the exhaust valve should be a. 1200 Hz b. 1000 Hz c. 600 Hz d. 120 Hz

Description : In a four stroke I.C engine completing 3000rpm the natural frequency of vibration of the exhaust valve should be a. 1200 Hz b. 1000 Hz c. 600 Hz d. 120 Hz

Last Answer : b. 1000 Hz

What is the channel bandwidth of a standard analogue telephone system? A. 300-500 Hz B. 1200 kHz C. 100-300 Hz D. 300-3400 Hz

Description : What is the channel bandwidth of a standard analogue telephone system? A. 300-500 Hz B. 1200 kHz C. 100-300 Hz D. 300-3400 Hz

Last Answer : D. 300-3400 Hz

ECE Board Exam March 1996 According to the Nyquist theorem, the sampling rate that can be used in a PCM system is ________ the highest audio frequency. A. once B. eight times C. twice D. thrice

Description : ECE Board Exam March 1996 According to the Nyquist theorem, the sampling rate that can be used in a PCM system is ________ the highest audio frequency. A. once B. eight times C. twice D. thrice

Last Answer : C. twice

If the bit rate for an FSK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200

Description : If the bit rate for an FSK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200

Last Answer : 1200

f the bit rate for an ASK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200

Description : f the bit rate for an ASK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200

Last Answer : 1200

The analog signal given below is sampled by 600 samples per second for m(t) = 3 sin 500 pt + 2 sin 700 pt

Description : The analog signal given below is sampled by 600 samples per second for m(t) = 3 sin 500 pt + 2 sin 700 pt then folding frequency is: (1) 500 Hz (2) 700 Hz (3) 300 Hz (4) 1400 Hz 

Last Answer : The analog signal given below is sampled by 600 samples per second for m(t) = 3 sin 500 pt + 2 sin 700 pt then folding frequency is: 300 Hz

For protection of level crossing gate in an emergency on BG double line the Gateman should place one detonator at one place and 3 detonators at a subsequent place at a distance of ------- a) and------- meters respectively b) 400 meters in 800 meters c) 500 meters and 1000 meters d) 600 meters and 1200 meters* e) 800 meters in 1500 meters

Description : For protection of level crossing gate in an emergency on BG double line the Gateman should place one detonator at one place and 3 detonators at a subsequent place at a distance of ------- a) and------ ... c) 500 meters and 1000 meters d) 600 meters and 1200 meters* e) 800 meters in 1500 meters

Last Answer : d) 600 meters and 1200 meters*

Indication post for detonator should be provided at a distance of ---------meter and --------- meter for BG level crossing a) 400 meters in 800 meters b) 500 meters and 1200 meters c) 600 meters and 1200 meter * d)600 meters and 1000 meters

Description : Indication post for detonator should be provided at a distance of ---------meter and --------- meter for BG level crossing a) 400 meters in 800 meters b) 500 meters and 1200 meters c) 600 meters and 1200 meter * d)600 meters and 1000 meters

Last Answer : c) 600 meters and 1200 meter *

Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it is assumed that each sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Description : Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it ... sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Last Answer : (C) 128 kbps

If the bit rate for a16-QAM signal is 4000 bps, what is the baudrate? A) 300 B) 400 C) 1000 D) 1200

Description : If the bit rate for a16-QAM signal is 4000 bps, what is the baudrate? A) 300 B) 400 C) 1000 D) 1200

Last Answer : 1000

A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58

Description : A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58

Last Answer : b. 0.184

The bandwidth of C-band satellite frequency band in U.S. A. 500 GHz B. 1000 GHz C. 1000 MHz D. 500 MHz

Description : The bandwidth of C-band satellite frequency band in U.S. A. 500 GHz B. 1000 GHz C. 1000 MHz D. 500 MHz

Last Answer : D. 500 MHz

The _____of a composite signal is the difference between the highest and the lowest frequencies contained in that signal. A) frequency B) period C) bandwidth D) amplitude

Description : The _____of a composite signal is the difference between the highest and the lowest frequencies contained in that signal. A) frequency B) period C) bandwidth D) amplitude

Last Answer : frequency

If the bandwidth of a signal is 5 KHz and thelowest frequency is 52 KHz, what is the highest frequency? A) 5 KHz B) 10 KHz C) 47 KHz D) 57 KHz

Description : If the bandwidth of a signal is 5 KHz and thelowest frequency is 52 KHz, what is the highest frequency? A) 5 KHz B) 10 KHz C) 47 KHz D) 57 KHz

Last Answer : 57 KHz

If the input to T-flipflop is 100 Hz signal, the final output of the three T-flipflops in cascade is (A) 1000 Hz (B) 500 Hz (C) 333 Hz (D) 12.5 Hz.

Description : If the input to T-flipflop is 100 Hz signal, the final output of the three T-flipflops in cascade is (A) 1000 Hz (B) 500 Hz (C) 333 Hz (D) 12.5 Hz.

Last Answer : (D) 12.5 Hz.

The analog signal m(t) is given below m(t) = 4 cos 100 pt + 8 sin 200 pt + cos 300 pt, the Nyquist sampling

Description : The analog signal m(t) is given below m(t) = 4 cos 100 pt + 8 sin 200 pt + cos 300 pt, the Nyquist sampling rate will be: (1) 1/100 (2) 1/200 (3) 1/300 (4) 1/600 

Last Answer : The analog signal m(t) is given below m(t) = 4 cos 100 pt + 8 sin 200 pt + cos 300 pt, the Nyquist sampling rate will be: 1/300

A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Description : A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Last Answer : C. 999.8 kHz, 1000 kHz, and 1000.2 kHz

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

Insensible loss of body water of normal adult is about (A) 50–100 ml (B) 100–200 ml (C) 300–500 ml (D) 600–1000 ml

Description : Insensible loss of body water of normal adult is about (A) 50–100 ml (B) 100–200 ml (C) 300–500 ml (D) 600–1000 ml

Last Answer : Answer : D

In glycinuria daily urinary excretion of glycine ranges from (A) 100–200 mg (B) 300–500 mg (C) 600–1000 mg (D) 1100–1400 mg

Description : In glycinuria daily urinary excretion of glycine ranges from (A) 100–200 mg (B) 300–500 mg (C) 600–1000 mg (D) 1100–1400 mg

Last Answer : Answer : C

Total capacitance of 300 mF capacitor and a 600 mF in series isA. 300 mF B. 500 mF C. 200 mF D. 1000 mF

Description : Total capacitance of 300 mF capacitor and a 600 mF in series isA. 300 mF B. 500 mF C. 200 mF D. 1000 mF

Last Answer : 200 mF

In ________, we combine signals from different sources to fit into a larger bandwidth. A) spread spectrum B) line coding C) block coding D) none of the above

Description : In ________, we combine signals from different sources to fit into a larger bandwidth. A) spread spectrum B) line coding C) block coding D) none of the above

Last Answer : spread spectrum

As per Nyquist criterion the sampling rate is (A) 2fs (B) (1/2)fs (C) (1/2fs) (D) (2/fs) Where fs is the signal frequency

Description : As per Nyquist criterion the sampling rate is (A) 2fs (B) (1/2)fs (C) (1/2fs) (D) (2/fs) Where fs is the signal frequency

Last Answer : (A) 2fs

What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Last Answer : C. 125,000

What is the typical frequency used for communicating to submerged submarines? A. 100 Hz B. 500 Hz C. 4 kHz D. 200 Hz

Description : What is the typical frequency used for communicating to submerged submarines? A. 100 Hz B. 500 Hz C. 4 kHz D. 200 Hz

Last Answer : A. 100 Hz

On 1st April, 2013, Y Ltd. Issued 1000, 12% debentures of Rs. 100 each at a discount of 6%. These debentures are redeemable in five equal annual instalments at the end of each year. What is the amount of discount to be written off in the first year i.e. on 31st March, 2007, through P & L A/c ? (A) Rs. 2000 (B) Rs. 1800 (C) Rs. 1200 (D) Rs. 600

Description : On 1st April, 2013, Y Ltd. Issued 1000, 12% debentures of Rs. 100 each at a discount of 6%. These debentures are redeemable in five equal annual instalments at the end of each year. What is the amount of discount to be written off ... & L A/c ? (A) Rs. 2000 (B) Rs. 1800 (C) Rs. 1200 (D) Rs. 600

Last Answer : Answer: Rs. 1200

Production at 60% activity is Rs 600 units, if flexible budget needs to be calculated at 80% activity what will be units produced? a) Rs 800 b) Rs 600 c) Rs 1200 d) Rs 1000

Description : Production at 60% activity is Rs 600 units, if flexible budget needs to be calculated at 80% activity what will be units produced? a) Rs 800 b) Rs 600 c) Rs 1200 d) Rs 1000

Last Answer : a) Rs 800

What theorem sets a limit on the maximum capacity of a channel with a given noise level? A. Nyquist theorem B. Hartley law C. Shannon-Hartley theorem D. Shannon theorem

Description : What theorem sets a limit on the maximum capacity of a channel with a given noise level? A. Nyquist theorem B. Hartley law C. Shannon-Hartley theorem D. Shannon theorem

Last Answer : C. Shannon-Hartley theorem

______ sets the limit on the maximum capacity of a channel with a given noise level. A. Hartley theorem B. Shannon-hartley theorem C. Nyquist theorem D. Shannon theorem

Description : ______ sets the limit on the maximum capacity of a channel with a given noise level. A. Hartley theorem B. Shannon-hartley theorem C. Nyquist theorem D. Shannon theorem

Last Answer : B. Shannon-hartley theorem

________ sets a limit on the maximum capacity of a channel with a give noise level. A. Hartley theorem B. Shannon-Hartley theorem C. Nyquist theorem D. Shannon theorem

Description : ________ sets a limit on the maximum capacity of a channel with a give noise level. A. Hartley theorem B. Shannon-Hartley theorem C. Nyquist theorem D. Shannon theorem

Last Answer : B. Shannon-Hartley theorem

Classify data networks. Explain with the help of Nyquist theorem, the data rate limitations in PSTN’s. Give an account of modems used in data transfer. Explain their importance and list some of the V-series recommendations.

Description : Classify data networks. Explain with the help of Nyquist theorem, the data rate limitations in PSTN’s. Give an account of modems used in data transfer. Explain their importance and list some of the V-series recommendations.

Last Answer : Classifications of Data Network:  Data Networks are classified according to their geographical coverage: Wide area networks (WANs) Metropolitan area networks(MANs) Local area ...  V.53 Limits for the maintenance of telephone type circuits used for data transmission. 

State sampling theorem. Define Nyquist rate.

Description : State sampling theorem. Define Nyquist rate.

Last Answer : SAMPLING THEOREM: Sampling theorem states that a band-limited signal of finite energy having the highest frequency component fm Hz can be represented and recovered completely from a set of samples taken ... frequency should be equal to or greater than twice the maximum signal frequency (fs≥ 2fm)

A periodic signal completes onecycle in 0.001 s. What is thefrequency? A) 1 Hz B) 100 Hz C) 1 KHz D) 1 MHz

Description : A periodic signal completes onecycle in 0.001 s. What is thefrequency? A) 1 Hz B) 100 Hz C) 1 KHz D) 1 MHz

Last Answer : 1 KHz

P and Q undertake to do a piece of job for Rs.1200. P alone can do it in 12 days while Q alone can do it in 16 days. With the help of R , they finish it in 6 days. Find the share of P,Q & R. a) 400,600,200 b) 200,400,600 c) 450,400,250 d) 600,450,150

Description :  P and Q undertake to do a piece of job for Rs.1200. P alone can do it in 12 days while Q alone can do it in 16 days. With the help of R , they finish it in 6 days. Find the share of P,Q & R. a) 400,600,200 b) 200,400,600 c) 450,400,250 d) 600,450,150

Last Answer : D R;s 1 day work = 1/6 – (1/12 + 1/16) =1/6 – 1/12 – 1/16 = (8-4-3)/48 = 1/48 P:Q:R = ratio of 1 day work = 1/12:1/16 : 1/48 =4:3:1 P’s share = Rs(1200*4/8) =Rs.600 Q’s share = Rs(1200 * 3/8) =Rs.450 R’s share = Rs(1200 * 1/8) =Rs.150

How wide is the spectrum bandwidth of a single GSM carrier? A. 100 kHz B. 200 kHz C. 50 kHz D. 16 kHz

Description : How wide is the spectrum bandwidth of a single GSM carrier? A. 100 kHz B. 200 kHz C. 50 kHz D. 16 kHz

Last Answer : B. 200 kHz

What bandwidth is needed to support a capacity of 128 kbps when the signal power to noise power ratio in decibels is 100? A. 19224 Hz B. 3853 Hz C. 19244 Hz D. 3583 Hz

Description : What bandwidth is needed to support a capacity of 128 kbps when the signal power to noise power ratio in decibels is 100? A. 19224 Hz B. 3853 Hz C. 19244 Hz D. 3583 Hz

Last Answer : B. 3853 Hz

What is the optimum reverberation time at 500 to 1000 Hz of an auditorium? A. 0.9 to 1.1 s B. 1.4 to 1.6 s C. 1.5 to 1.6 s D. 1.6 to 1.8 s

Description : What is the optimum reverberation time at 500 to 1000 Hz of an auditorium? A. 0.9 to 1.1 s B. 1.4 to 1.6 s C. 1.5 to 1.6 s D. 1.6 to 1.8 s

Last Answer : D. 1.6 to 1.8 s

The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit conversion is 20%, then the exit temperature (in k) is (Data: Heat of reaction at 298 K = - 50000 kJ/ kmole of A reacted Heat capacities CPA = CPB = 100kJ/kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Description : The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit ... /kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Last Answer : (C) 600

What is the threshold for water indicating scarcity in cubic meters per capita per annum as per UNDP? [a] 500 [b] 1000 [c] 1500 [d] 1200 [e] None of the above

Description : What is the threshold for water indicating scarcity in cubic meters per capita per annum as per UNDP? [a] 500 [b] 1000 [c] 1500 [d] 1200 [e] None of the above

Last Answer : [b] 1000

Check supervisor in RMS the standard for test sorting will be a) 500 article per hour b) 800 article per hour c) 1000 article per hour d) 1200 article per hour

Description : Check supervisor in RMS the standard for test sorting will be a) 500 article per hour b) 800 article per hour c) 1000 article per hour d) 1200 article per hour

Last Answer : a) 500 article per hour

Match the items given in column I with those in column II and select the correct option given below. Column I Column II (A) Tidal volume (i) 2500 – 3000 mL (B) Inspiratory reserve (ii) 1100 – 1200 mL volume (C) Expiratory reserve (iii) 500 – 550 mL volume (D) Residual volume (iv) 1000 – 1100 mL (A) (B) (C) (D) (a) (iii) (ii) (i) (iv) (b) (iii) (i) (iv) (ii) (c) (i) (iv) (ii) (iii) (d) (iv) (iii) (ii) (i)

Description : Match the items given in column I with those in column II and select the correct option given below. Column I Column II (A) Tidal volume (i) 2500 - 3000 mL (B) Inspiratory reserve (ii) 1100 - 1200 mL volume (C) Expiratory reserve (iii ... i) (iv) (ii) (c) (i) (iv) (ii) (iii) (d) (iv) (iii) (ii) (i)

Last Answer : (b) (iii) (i) (iv) (ii)

Tidal volume and expiratory reserve volume of an athlete is 500 mL and 1000 mL respectively. What will be his expiratory capacity if the residual volume is 1200 mL? (a) 2700 mL (b) 1500 mL (c) 1700 mL (d) 2200 mL

Description : Tidal volume and expiratory reserve volume of an athlete is 500 mL and 1000 mL respectively. What will be his expiratory capacity if the residual volume is 1200 mL? (a) 2700 mL (b) 1500 mL (c) 1700 mL (d) 2200 mL

Last Answer : b) 1500 mL

Speed of the cutter bar in case of combine (grain) is :- a) 400 – 550 rpm b) 500 – 800 rpm C) 800 - 1000 rpm d) 1000 – 1200 rpm

Description : Speed of the cutter bar in case of combine (grain) is :- a) 400 – 550 rpm b) 500 – 800 rpm C) 800 - 1000 rpm d) 1000 – 1200 rpm

Last Answer : a) 400 – 550 rpm

The total number of male, female and children working in a factory is 72. They earn Rs.16000 in a day. If the sum of the wages of all male, all female and all children is in the ratio of 36 : 20 : 24 and if the wages of an individual male, female and child is in the ratio 6 : 5 : 3, then how much a female earn in a day? a) Rs 500 b) Rs 1000 c) Rs 1500 d) Rs 1200

Description : The total number of male, female and children working in a factory is 72. They earn Rs.16000 in a day. If the sum of the wages of all male, all female and all children is in the ratio of 36 : 20 : 24 and if the ... 3, then how much a female earn in a day? a) Rs 500 b) Rs 1000 c) Rs 1500 d) Rs 1200

Last Answer : B Ratio of number of male, female and children =36/6:20/5:24/3 = 6x:4x:8x So, (6x + 4x + 8x) = 72 18x=72 X=72/18=4 So, x = 4 Therefore, number of female = 16 Share of all female =20/80*16000 =Rs 4000 So, Share of each female = 4000/4 = Rs 1000

For a ______ channel, the Nyquist bit rate formula defines thetheoretical maximum bit rate. A) noisy B) noiseless C) bandpass D) low-pass

Description : For a ______ channel, the Nyquist bit rate formula defines thetheoretical maximum bit rate. A) noisy B) noiseless C) bandpass D) low-pass

Last Answer : noiseless

A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b

Description : A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b

Last Answer : digital

What is the bandwidth ofa signal that ranges from 1 MHz to4 MHz? A) 4 MHz B) 1 KHz C) 3 MHz D) none of the above

Description : What is the bandwidth ofa signal that ranges from 1 MHz to4 MHz? A) 4 MHz B) 1 KHz C) 3 MHz D) none of the above

Last Answer : 3 MHz

The method of determining the bandwidth of any processing system is ______. A. Bandwidth analysis B. Frequency spectrum C. Spectral analysis D. Frequency analysis

Description : The method of determining the bandwidth of any processing system is ______. A. Bandwidth analysis B. Frequency spectrum C. Spectral analysis D. Frequency analysis

Last Answer : C. Spectral analysis