Description : In ATM,_____ is for conventionalpacket switching(virtual-circuit approachor datagram approach). A) AAL1 B) AAL2 C) AAL3/4 D) AAL5
Last Answer : AAL3/4
Description : In ATM,_______is for short packets. A) AAL1 B) AAL2 C) AAL3/4 D) AAL5
Last Answer : AAL2
Description : In ATM,______ is for packets requiring no sequencing and noerror control mechanism. A) AAL1 B) AAL2 C) AAL3/4 D) AAL5
Last Answer : AAL5
Description : In ATM, the _____ layer defines thetransmission medium,bit transmission,encoding, and electrical-to-optical transformation. A) physical B) ATM layer C) AAL D) none of the above
Last Answer : physical
Description : In ATM, the ______ layerprovides routing, traffic management, switching, and multiplexing services. A) physical B) ATM C) AAL D) none of the above
Last Answer : ATM
Description : A(n) ______ is theinterface between auser and an ATM switch. A) UNI B) NNI C) NNN D) None of the above
Last Answer : UNI
Description : ______ eliminates the varying delay times associated withdifferent-size packets. A) X.25 B) Frame Relay C) ATM D) all of theabove
Description : ______ is the cell relay protocol designed by the corresponding Forum and adopted by the ITU-T. A) X.25 B) Frame Relay C) ATM D) none of the above
Description : The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM
Last Answer : DSSS
Description : For a ______ channel, we need to use the Shannon capacity tofind the maximum bit rate. A) noisy B) noiseless C) bandpass D) low-pass
Last Answer : noisy
Description : For a ______ channel, the Nyquist bit rate formula defines thetheoretical maximum bit rate. A) noisy B) noiseless C) bandpass D) low-pass
Last Answer : noiseless
Description : A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58
Last Answer : b. 0.184
Description : In ATM, the _______layeraccepts transmissions from upper-layer servicesand maps them into ATM cells. A) physical B) ATM C) AAL D) none of the above
Last Answer : AAL
Description : In ATM, connection between two endpoints is accomplishedthrough_______. A) TPs B) VPs C) VCs D) all of theabove
Last Answer : all of theabove
Description : _________is the interface between two ATM switches. A) UNI B) NNI C) NNN D) none of the above
Last Answer : NNI
Description : The ATM data packet is acell composed of ______bytes. A) 40 B) 50 C) 52 D) 53
Last Answer : 53
Description : The ATM standard defines______ layers. A) two B) three C) four D) five
Last Answer : three
Description : In ATM,a virtual connection is definedby _________. A) VPI B) VCI C) DLCI D) acombination of (a) and (b)
Last Answer : acombination of (a) and (b)
Description : ________ is a virtual-circuit wide-area network that was designed in response to demands fora new type of WAN in thelate1980s and early 1990s. A) X.25 B) Frame Relay C) ATM D) none of the above
Last Answer : Frame Relay
Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above
Last Answer : d. All the above
Description : Assertion :- At constant temp `0^(@)C` and 1 atm, the change `H_(2)O(s)rarr H_(2)O(l)Delta H` and `Delta E` both are zero. Reason :- During isothermal
Last Answer : Assertion :- At constant temp `0^(@)C` and 1 atm, the change `H_(2)O(s)rarr H_(2)O(l) ... Reason is False. D. If both Assertion & Reason are false.
Description : One mole of a gas occupying `3dm^(3)` expands against a constant external pressure of 1 atm to a volume of 13 lit. The workdone is :-
Last Answer : One mole of a gas occupying `3dm^(3)` expands against a constant external pressure of 1 atm to a volume of 13 lit. ... `dm^(3)` D. `-48` atm `dm^(3)`
Description : What is the pressure of the air, in atm, in the lungs when the gas expands to 175.0 mL at a body temperature of 37 ∘C, and the amount of gas remains constant?
Last Answer : I don’t understand the question
Description : Which of the following is not a unit of the equilibrium constant Kp? (where, Δx = number of moles of products number of moles of reactants) (A) (atm)Δx, when Δx is negative (B) (atm)Δx, when Δx is positive (C) Dimensionless, when Δx = 0 (D) (atm)Δx2, when Δx > 0
Last Answer : (D) (atm)Δx2, when Δx > 0
Description : Consider the equilibrium A(g) + B(g) = AB(g). When the partial pressure of A is 10-2 atm, the partial pressure of B is 10-3 atm and the partial pressure of AB is 1 atm, the equilibrium constant 'K' is (A) 10 atm-1 (B) 105 atm-1 (C) 10 (dimensionless) (D) 105 (dimensionless)
Last Answer : Option B
Description : A 32 bit microprocessor has the word length equal to a. 2 byte b. 32 byte c. 4 byte d. 8 byte
Last Answer : 4 byte
Description : A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits
Last Answer : Eight bits
Description : Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit
Last Answer : Binary codes
Description : Which of the following is associated with error detector? a. Odd parity bit b. Even parity bit c. Both of the above d. None of above
Last Answer : Both of the above
Description : The data recording format in most of the modern magnetic tape is a. 7-bit ASCII b. 7-bit EBCDIC c. 8-bit ASCII d. 8-bit EBCDIC
Last Answer : 8-bit EBCDIC
Description : BCD is a. Binary Coded Decimal b. Bit Coded Decimal c. Binary Coded Digit d. Bit Coded Digit
Last Answer : Binary Coded Decimal
Description : EBCDIC stands for a. Extended Binary Coded Decimal Interchange Code b. Extended Bit Code Decimal Interchange Code c. Extended Bit Case Decimal Interchange Code d. Extended Binary Case Decimal Interchange Code
Last Answer : Extended Binary Coded Decimal Interchange Code
Description : A band is always equivalent to a. a byte b. a bit c. 100 bits d. none of above
Last Answer : none of above
Description : The x.25 standard specifies a a. technique for start-stop data b. technique for dial access c. DTE/DCE interface d. data bit rate e. none of above
Last Answer : DTE/DCE interface
Description : In Ethernet addressing, if the least significant bit of the firstbyte is 1, the address is _________. A) unicast B) multicast C) broadcast D) none of the above
Last Answer : multicast
Description : In Ethernet addressing, if the least significant bit of the firstbyte is 0, the address is _________. A) unicast B) multicast C) broadcast D) none of the above
Last Answer : unicast
Description : Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above
Last Answer : 48-b
Description : A ________receivesa signal and,before it becomes too weak or corrupted, regenerates the original bit pattern. It thensends the refreshed signal. A) passive hub B) repeater C) bridge D) router
Last Answer : repeater
Description : The most common protocol for point-to-pointaccess is the Point-to-Point Protocol (PPP), which is a _________protocol. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above
Last Answer : byte-oriented
Description : High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above
Last Answer : bit-oriented
Description : We addr redundant bits toeach block to make thelength n = k + r. The resultingn-bit blocksare called _________. A) datawords B) blockwords C) codewords D) none of the above
Last Answer : codewords
Description : A burst error means that two or more bits in the dataunit havechanged. A) double-bit B) burst C) single-bit D) none of the above
Last Answer : burst
Description : . In cyclic redundancy checking, the divisor is _______the CRC. A) The same size as B) one bit less than C) one bit more than D) none of the above
Last Answer : one bit more than
Description : Which error detection method consists of just one redundant bit per data unit? A) Simple parity check B) Two-dimensionalparity check C) CRC D) Checksum
Last Answer : Simple parity check
Description : If the baudrate fora 64-QAM signal is 2000, what is the bit rate? A) 300 B) 400 C) 1000 D) 12000
Last Answer : 12000
Description : If the bit rate for a16-QAM signal is 4000 bps, what is the baudrate? A) 300 B) 400 C) 1000 D) 1200
Last Answer : 1000
Description : If the bit rate for an FSK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200
Last Answer : 1200
Description : f the bit rate for an ASK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200
Description : The _____schemeuses data patterns of size 2 and encodes the 2-bit patterns as one signal element belonging to a four-level signal. A) 4B5B B) 2B1Q C) MLT-3 D) none of the above
Last Answer : 2B1Q