Description : ____ is designed to use thehigh bandwidthcapabilityof fiber-optic cable. A) FDM B) TDM C) WDM D) None of the above
Last Answer : WDM
Description : _____ isa digital multiplexing technique for combiningseveral low-ratechannels into onehigh-rate one. A) FDM B) TDM C) WDM D) None of the above
Last Answer : TDM
Description : _____ isa digitalprocess that allows several connections to share thehighbandwidth ofa link. A) FDM B) TDM C) WDM D) None of the above
Description : _____ isan analog multiplexing technique to combine optical signals. A) FDM B) TDM C) WDM D) None of the above
Description : Which multiplexing technique involves signals composed of light beams? A) FDM B) TDM C) WDM D) none of the above
Description : Which multiplexing technique transmits digital signals? A) FDM B) TDM C) WDM D) None of the above
Description : Which multiplexing technique transmits analog signals? A) FDM B) TDM C) WDM D) (a) and (c)
Last Answer : (a) and (c)
Description : Using_________each connected device is assigned a time slot whether or not the device has any thing to send. (A) WDM (B) FDM (C) TDM (D) STDM
Last Answer : (C) TDM
Description : Time synchronization is necessary in (A) FDM. (B) TDM. (C) WDM. (D) Quadrature multiplexing
Last Answer : (B) TDM.
Description : Multiplexing scheme use by baseband transmission. A. FDM B. Space multiplexing C. TDM D. Statistical multiplexing
Last Answer : C. TDM
Description : We candivide today's networks into ____ broad categories. A) four B) three C) five D) two
Last Answer : three
Description : The _______ technique uses M different carrier frequencies that are modulated by the source signal. At one moment, the sign modulates one carrier frequency; at the next moment, thesignal modulates another carrier frequency. A) FDM B) DSSS C) FHSS D) TDM
Last Answer : FHSS
Description : Which multiplexing technique shifts each signal to a different carrier frequency? A) FDM B) TDM C) Both (a)and (b) D) None of the above
Last Answer : FDM
Description : DMT is a modulation technique that combineselements of _______ and _______. A) FDM; TDM B) QDM; QAM C) FDM; QAM D) PSK; FSK
Last Answer : FDM; QAM
Description : The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM
Last Answer : DSSS
Description : An ______signal is the optical modulation of an STS-n (or STM-n) signal. A) OC-n B) TDM-n C) FDM-n D) none of the above
Last Answer : TDM-n
Description : In ________ TDM, slots are dynamically allocated to improvebandwidth efficiency. A) synchronous B) statistical C) isochronous D) none of the above
Last Answer : statistical
Description : In ________ TDM, each input connection hasan allotment in the outputeven if it is not sendingdata. A) synchronous B) statistical C) isochronous D) none of the above
Last Answer : synchronous
Description : SONET is a _______ TDM system. A) asynchronous B) synchronous C) statistical D) none of the above
Last Answer : none of the above
Description : Given the following statements: (a) Frequency Division Multiplexing is a technique that can be applied when the bandwidth of a link is greater than combined bandwidth of signals to be transmitted. (b) Wavelength Division Multiplexing (WDM) ... c) is true. (D) (a), (b) and (d) are true; (c) is false.
Last Answer : (D) (a), (b) and (d) are true; (c) is false.
Description : Which of the following is oldest multiplexing scheme? A. Frequency Division Multiplexing (FDM) B. Time Division Multiplexing (TDM) C. Code Division Multiplexing (CDM) D. Space Division Multiplexing (SDM)
Last Answer : D. Space Division Multiplexing (SDM)
Description : One of the reasons why FDM is being replaced by TDM is A. noise is amplified with voice when an FDM system is used B. it is difficult to place channels side by side C. there is more time than frequency D. Most available frequencies has been used
Last Answer : A. noise is amplified with voice when an FDM system is used
Description : Compare FDM & TDM systems
Last Answer : Sr. No. FDM TDM 1 Divides the channel into the two or more frequency ranges that do not overlap. Divides and allocates certain Time periods to each channel. 2 Code word is ... Needs guard bands Needs guard time 4 Problem of crosstalk No problem of crosstalk
Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps
Last Answer : d. 3200 bps
Description : We can divide coding schemes intotwobroad categories: ________ and______coding. A) block; linear B) linear; nonlinear C) block; convolution D) none of the above
Last Answer : block; convolution
Description : Coding schemes can be divided into two broad categories…………, …… A. character coding, integer coding B. hamming coding and block coding C. Hamming coding and convolution coding D. Block Coding and Convolution Coding.
Last Answer : D. Block Coding and Convolution Coding.
Description : In TDM, the transmissionrate of the multiplexed path isusually_______ thesum of thetransmission rates of thesignal sources. A) greater than B) less than C) equal to D) not related to
Last Answer : greater than
Description : In synchronous TDM, forn signal sources of the same data rate, eachframe contains _______ slots. A) n B) n + 1 C) n- 1 D) 0to n
Last Answer : n
Description : If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS
Last Answer : c. 32 Kbps
Description : In______ schemes, the voltagesare on the both sidesof the time axis. Forexample, thevoltage level for 0 can bepositive and thevoltage level for 1 can be negative. A) polar B) bipolar C) unipolar D) all of theabove
Last Answer : polar
Description : Where was India’s first computer installed and when? a. Indian Institute of Technology, Delhi, 1977 b. Indian Institute of Science, Bangalore, 1971 c. Indian Iron & Steel Co. Ltd., 1968 d. Indian Statistical Institute, Calcutta, 1955
Last Answer : Indian Statistical Institute, Calcutta, 1955
Description : Ina synchronous modem, the receive equilizer is known as a. adaptive equilizer b. impariment equilizer c. statistical equilizer d. compromise equilizer
Last Answer : adaptive equilizer
Description : The memorandum and statistical register (MS 14 a) are prepared by____ on the ____ and the statistical memorandum should be submitted to _____on the 10th of the each month counter signed by______ a) Postmaster, ... /Parcel PA, 1st of the each month, Head of the circle, postmaster d) None of these
Last Answer : d) None of these
Description : State two advantages of WDM technique.
Last Answer : ADVANTAGES OF WDM: 1. WDM has enhanced capacity. 2. WDM can be used for full duplex transmission with a single fiber. 3. It is inherently easier to reconfigure (addition or ... use optical components which are simpler and more reliable and often less costly than their electronic counterparts
Description : What is the full form of 'WDM' ? -How To ?
Last Answer : The full form of 'WDM' is Wholesale Debt Market
Last Answer : The full form of 'WDM' is World Debt Market
Description : WDM stands for ____________________-division multiplexing.
Last Answer : Wavelength
Description : Adding bits to synchronize one digital signal to another is called: a. bit stuffing b. bit-synch c. SDH d. WDM
Last Answer : a. bit stuffing
Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is ............... (A) 400 bps (B) 800 bps (C) 1600 bps (D) 3200 bps
Last Answer : (D) 3200 bps Answer: D Explanation: The multiplexer is shown in the Figure. Each frame carries 1 byte from each channel; the size of each frame, therefore, is 4 bytes, or 32 bits. Because each ... channel, the frame rate must be 100 frames per second. The bit rate is 100 32 = 3200 bps.
Description : What is copy of a theme with different color schemes called?
Last Answer : B ig D ick
Description : Can a Tablespace hold objects from different Schemes ?
Last Answer : Yes.
Description : Can a tablespace hold objects from different schemes?
Description : What are different types of busbar arrangement Schemes in Substations?
Last Answer : Different switching schemes or busbar arrangement scheme employed in switch-yard are: Single Bus Scheme Double bus single breaker scheme Main and Transfer busbar scheme Double bus single breaker scheme Breaker and half scheme Ring main bus scheme
Description : Can a Tablespace hold objects from different Schemes?
Description : How would one squeeze more channels of communication into TDM frames of standard length? A. Shorten the time delay for each channel B. Raise the amplitude C. Add modulators D. Remove the synchronizing pulses
Last Answer : A. Shorten the time delay for each channel
Description : RPF guarantees that eachnetwork receives only ____ of the multicast packet. A) one copy B) two copies C) a or b D) none of the above
Description : The RTS and CTS frames in CSMA/CA ____ solvethe hidden stationproblem. The RTS and CTS frames in CSMA/CA ____ solve the exposed station problem. A) can; cannot B) cannot; can C) can; can D) cannot; cannot
Last Answer : can; cannot
Description : A generator that contains afactor of ____ can detectall odd-numberederrors. A) x B) x + 1 C) 1 D) none of the above
Last Answer : x
Description : In a multiplexed system,__ lines share thebandwidthof ____ link. A) 1; n B) 1; 1 C) n; 1 D) n; n
Last Answer : n; 1
Description : The signal rate is sometimes called the ____ rate. A) baud B) bit C) signal D) none of the above
Last Answer : baud