In pure ALOHA, the vulnerable time is ______the frame transmissiontime. A) the sameas B) two times C) three times D) none of the above

In pure ALOHA, the vulnerable time is ______the frame transmissiontime.
A)
the sameas
B)
two times
C)
three times
D)
none of the above
by

1 Answer

Answer :

two times
by

Related questions

Inslotted ALOHA, the vulnerable time is ______ the frame transmissiontime. A) the sameas B) two times C) three times D) none of the above

Description : Inslotted ALOHA, the vulnerable time is ______ the frame transmissiontime. A) the sameas B) two times C) three times D) none of the above

Last Answer : the sameas

The vulnerable timefor CSMA is the ________propagationtime. A) the sameas B) two times C) three times D) none of the above

Description : The vulnerable timefor CSMA is the ________propagationtime. A) the sameas B) two times C) three times D) none of the above

Last Answer : the sameas

In__________, eachstation is forced to send only at the beginning of the time slot. A) pure ALOHA B) slotted ALOHA C) both (a) and (b) D) neither (a) nor (b)

Description : In__________, eachstation is forced to send only at the beginning of the time slot. A) pure ALOHA B) slotted ALOHA C) both (a) and (b) D) neither (a) nor (b)

Last Answer : slotted ALOHA

The maximum throughput for pure ALOHA is________per cent. A) 12.2 B) 18.4 C) 36.8 D) none of the above

Description : The maximum throughput for pure ALOHA is________per cent. A) 12.2 B) 18.4 C) 36.8 D) none of the above

Last Answer : 18.4

A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58

Description : A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58

Last Answer : b. 0.184

For pure ALOHA, the maximum channel utilization is a. 100% b. 50% c. 36% d. 18%

Description : For pure ALOHA, the maximum channel utilization is a. 100% b. 50% c. 36% d. 18%

Last Answer : d. 18%

Given two sine waves A and B, if the frequency of A is twicethat of B, thenthe period of B is ________ thatof A. A) one-half B) twice C) the sameas D) indeterminate from

Description : Given two sine waves A and B, if the frequency of A is twicethat of B, thenthe period of B is ________ thatof A. A) one-half B) twice C) the sameas D) indeterminate from

Last Answer : twice

The minimum bandwidth of Manchester and differential Manchester is ____that of NRZ. A) the sameas B) twice C) thrice D) none of the above

Description : The minimum bandwidth of Manchester and differential Manchester is ____that of NRZ. A) the sameas B) twice C) thrice D) none of the above

Last Answer : twice

According to IS:456-1978, the spacing of stirrups shall not exceed a distance ______the leverarm of the resisting moment. (a) Equal to (b) Two times (c) Three times (d) All the above

Description : According to IS:456-1978, the spacing of stirrups shall not exceed a distance ______the leverarm of the resisting moment. (a) Equal to (b) Two times (c) Three times (d) All the above

Last Answer : (a) Equal to

A certain population of ALOHA users manages to generate 70 request/sec. If the time is slotted in units of 50 msec, then channel load would be a. 4.25 b. 3.5 c. 350 d. 450

Description : A certain population of ALOHA users manages to generate 70 request/sec. If the time is slotted in units of 50 msec, then channel load would be a. 4.25 b. 3.5 c. 350 d. 450

Last Answer : b. 3.5

In IEEE 802.11, the access method used in the DCF sublayer is _________. A) ALOHA B) CSMA/CA C) CSMA/CD D) none of the above

Description : In IEEE 802.11, the access method used in the DCF sublayer is _________. A) ALOHA B) CSMA/CA C) CSMA/CD D) none of the above

Last Answer : CSMA/CA

The Aloha protocol is an OSI _______ protocol for LAN networks with broadcast topology A. layer 1 B. layer 4 C. layer 2 D. layer 3

Description : The Aloha protocol is an OSI _______ protocol for LAN networks with broadcast topology A. layer 1 B. layer 4 C. layer 2 D. layer 3

Last Answer : C. layer 2

With Slotted Aloha, a …………. sends out small clock tick packets to the outlying stations. A. distributed clock B. synchronized clock C. centralized clock D. Digital clock

Description : With Slotted Aloha, a …………. sends out small clock tick packets to the outlying stations. A. distributed clock B. synchronized clock C. centralized clock D. Digital clock

Last Answer : C. centralized clock

A pure ALOHA Network transmit 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is .............. (A) 0.384 (B) 0.184 (C) 0.286 (D) 0.586

Description : A pure ALOHA Network transmit 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is .............. (A) 0.384 (B) 0.184 (C) 0.286 (D) 0.586

Last Answer : (B) 0.184

______ eliminates the varying delay times associated withdifferent-size packets. A) X.25 B) Frame Relay C) ATM D) all of theabove

Description : ______ eliminates the varying delay times associated withdifferent-size packets. A) X.25 B) Frame Relay C) ATM D) all of theabove

Last Answer : ATM

Gunveen, Marshy and Aloha are three developers working on an exciting new app, and the launch day is just a day away. Gunveen creates -Technology

Description : Gunveen, Marshy and Aloha are three developers working on an exciting new app, and the launch day is just a day away. Gunveen creates -Technology

Last Answer : The team members are not working in a systematic way and they are not saving the versions of their work. Changes made in one part of the software can be incompatible with those made by another ... trusted until it's tested. So testing and development proceed together until a new version is ready.

Aloha and ATA Airlines cease operations; Are these signs that the US has hit a recession?

Description : Aloha and ATA Airlines cease operations; Are these signs that the US has hit a recession?

Last Answer : The powers at be don’t want to admit there is a recession, but yes along with other things these are signs the terrorist are getting what they wanted. To destroy the American economy.

LAN? a) CDMA b) CSMA/CA c) ALOHA d) CSMA/CD

Description : LAN? a) CDMA b) CSMA/CA c) ALOHA d) CSMA/CD

Last Answer : b) CSMA/CA

Which multiple access technique is used by IEEE 802.11 standard for wireless LAN? a. ALOHA b. CSMA/CA c. CDMA d. none of the mentioned

Description : Which multiple access technique is used by IEEE 802.11 standard for wireless LAN? a. ALOHA b. CSMA/CA c. CDMA d. none of the mentioned

Last Answer : b. CSMA/CA

Inthe ________method, a stationthat has a frame tosend senses the line. If the line is idle, it sends immediately. If theline is not idle, it waits a random amount of time and then senses the line again. A) nonpersistent B) 1-persistent C) p-persistent D) none of the above

Description : Inthe ________method, a stationthat has a frame tosend senses the line. If the line is idle, it sends immediately. If theline is not idle, it waits a random amount of time and then senses the line again. A) nonpersistent B) 1-persistent C) p-persistent D) none of the above

Last Answer : nonpersistent

What will be the efficiency of a Stop and Wait protocol, if the transmission time for a frame is 20ns and the propagation time is 30ns? a. 20% b. 25% c. 40% d. 66%

Description : What will be the efficiency of a Stop and Wait protocol, if the transmission time for a frame is 20ns and the propagation time is 30ns? a. 20% b. 25% c. 40% d. 66%

Last Answer : b. 25%

How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channelcapacity. Assuming that processing delay is negligible, the minimum number of bits for the sequence number field in a frame for maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Description : The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channel capacity. Assuming that processing ... maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Last Answer : c. C

Let G(x) be the generator polynomial used for CRC checking. What is the condition that should be satisfied by G(x) to detect odd number of bits in error? a. G(x) contains more than two terms b. G(x) does not divide 1+x^k, for any k not exceeding the frame length c. 1+x is a factor of G(x) d. G(x) has an odd number of terms

Description : Let G(x) be the generator polynomial used for CRC checking. What is the condition that should be satisfied by G(x) to detect odd number of bits in error? a. G(x) contains more than two terms b. G(x) does ... exceeding the frame length c. 1+x is a factor of G(x) d. G(x) has an odd number of terms

Last Answer : c. 1+x is a factor of G(x)

Header of a Layer two frame usually contain ______________ A. synchronization bytes B. addresses C. frame identifier D. all of the mentioned

Description : Header of a Layer two frame usually contain ______________ A. synchronization bytes B. addresses C. frame identifier D. all of the mentioned

Last Answer : D. all of the mentioned

The 802.2 frame specifies a type whereas 802.3 frame specifies a length: A. True B. False

Description : The 802.2 frame specifies a type whereas 802.3 frame specifies a length: A. True B. False

Last Answer : True

- MAC is to Ethernet what ________ is to Frame Relay. A. DLCI B. LCI C. PVC D. None of the above

Description : - MAC is to Ethernet what ________ is to Frame Relay. A. DLCI B. LCI C. PVC D. None of the above

Last Answer : DLCI

In IEEE 802.11, when a frame isgoingfrom one AP to another AP in a wireless distribution system, the address flag is_____ A) 00 B) 01 C) 10 D) 11

Description : In IEEE 802.11, when a frame isgoingfrom one AP to another AP in a wireless distribution system, the address flag is_____ A) 00 B) 01 C) 10 D) 11

Last Answer : 11

In IEEE 802.11, when a frame isgoingfrom a station to an AP, theaddress flag is _____. A) 00 B) 01 C) 10 D) 11

Description : In IEEE 802.11, when a frame isgoingfrom a station to an AP, theaddress flag is _____. A) 00 B) 01 C) 10 D) 11

Last Answer : 10

In IEEE 802.11, when a frame is coming from an AP and going to astation, the address flag is _______. A) 00 B) 01 C) 10 D) 11

Description : In IEEE 802.11, when a frame is coming from an AP and going to astation, the address flag is _______. A) 00 B) 01 C) 10 D) 11

Last Answer : 01

In IEEE 802.11, when a frame isgoingfrom one station in a BSS toanother without passing through thedistribution system, the address flag is _____ A) 00 B) 01 C) 10 D) 11

Description : In IEEE 802.11, when a frame isgoingfrom one station in a BSS toanother without passing through thedistribution system, the address flag is _____ A) 00 B) 01 C) 10 D) 11

Last Answer : 00

Inthe _________ method, a special packet called a ______ circulates through the ring. A) reservation: control frame B) polling: poll request C) token passing: token D) none of the above

Description : Inthe _________ method, a special packet called a ______ circulates through the ring. A) reservation: control frame B) polling: poll request C) token passing: token D) none of the above

Last Answer : token passing: token

In ________,a station monitors the medium after it sends a frame to see if the transmission was successful. If so, the station is finished. If, however, there is a collision, the frameis sentagain. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Description : In ________,a station monitors the medium after it sends a frame to see if the transmission was successful. If so, the station is finished. If, however, there is a collision, the frameis sentagain. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Last Answer : CSMA/CD

Inthe _________ method, after the station finds the lineidle, it sends its frame immediately. If the line isnot idle, it continuously senses theline until it finds it idle. A) nonpersistent B) 1-persistent C) p-persistent D) none of the above

Description : Inthe _________ method, after the station finds the lineidle, it sends its frame immediately. If the line isnot idle, it continuously senses theline until it finds it idle. A) nonpersistent B) 1-persistent C) p-persistent D) none of the above

Last Answer : 1-persistent

In the Ethernet frame, the_______field contains error detection information. A) CRC B) preamble C) address D) none of the above

Description : In the Ethernet frame, the_______field contains error detection information. A) CRC B) preamble C) address D) none of the above

Last Answer : CRC

In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above

Description : In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above

Last Answer : preamble

The maximum frame length for 10-Mbps Ethernet is ________ bytes. A) 1518 B) 1500 C) 1200 D) none of the abov

Description : The maximum frame length for 10-Mbps Ethernet is ________ bytes. A) 1518 B) 1500 C) 1200 D) none of the abov

Last Answer : 1518

The minimum frame length for 10-Mbps Ethernet is _______bytes. A) 32 B) 80 C) 128 D) none of the above

Description : The minimum frame length for 10-Mbps Ethernet is _______bytes. A) 32 B) 80 C) 128 D) none of the above

Last Answer : none of the above

A _______ can check the MAC addresses contained inthe frame. A) passive hub B) repeater C) bridge D) route

Description : A _______ can check the MAC addresses contained inthe frame. A) passive hub B) repeater C) bridge D) route

Last Answer : bridge

A __________ forwards every frame; it has no filteringcapability. A) passive hub B) repeater C) bridge D) router

Description : A __________ forwards every frame; it has no filteringcapability. A) passive hub B) repeater C) bridge D) router

Last Answer : repeater

Both Go-Back-N and Selective-Repeat Protocols use a_________. A) sliding frame B) sliding windowC)sliding packetD)none of the above

Description : Both Go-Back-N and Selective-Repeat Protocols use a_________. A) sliding frame B) sliding window C) sliding packet D) none of the above

Last Answer : sliding window

Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Description : Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Last Answer : Stop-and-Wait

A _________ network is across between a circuit-switchednetworkand a datagram network. It has some characteristics ofboth. A) virtual-circuit B) packet-switched C) frame-switched D) none of the above

Description : A _________ network is across between a circuit-switchednetworkand a datagram network. It has some characteristics ofboth. A) virtual-circuit B) packet-switched C) frame-switched D) none of the above

Last Answer : virtual-circui

In _______ there are no setup or teardown phases. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In _______ there are no setup or teardown phases. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

In __________, eachpacket is treatedindependentlyof all others. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In __________, eachpacket is treatedindependentlyof all others. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

In _________, resources areallocatedon demand. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In _________, resources areallocatedon demand. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

In _________, thereis no resource allocation for a packet. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In _________, thereis no resource allocation for a packet. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

In _______, the resources need to bereserved during the setup phase; the resources remain dedicated for the entire durationof data transfer phase until the teardownphase. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In _______, the resources need to bereserved during the setup phase; the resources remain dedicated for the entire durationof data transfer phase until the teardownphase. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : circuit switching

A ________network is made of a set of switches connected by physical links, in which each link is divided into nchannels. A) line-switched B) frame-switched C) circuit-switched D) none of the above

Description : A ________network is made of a set of switches connected by physical links, in which each link is divided into nchannels. A) line-switched B) frame-switched C) circuit-switched D) none of the above

Last Answer : circuit-switched

In_______transmission, astartbit and a stopbit frame a character byte. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Description : In_______transmission, astartbit and a stopbit frame a character byte. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Last Answer : asynchronous serial