Description : Instructions and memory address are represented by A) Character code B) Binary codes C) Binary word D) Parity bit
Last Answer : Answer : B
Description : Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit
Last Answer : Binary codes
Last Answer : b. Binary codes
Description : Computer instructions written with the use of English words instead of binary machine code is called a. Mnemonics b. Symbolic code c. Gray codes d. Opcode
Last Answer : b. Symbolic code
Description : Which of the following is associated with error detector? a. Odd parity bit b. Even parity bit c. Both of the above d. None of above
Last Answer : c. Both of the above
Description : The advantage of memory mapped I/O over I/O mapped I/O is, a) Faster b) Many instructions supporting memory mapped I/O c) Require a bigger address decoder d) All the above
Last Answer : d) All the above
Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management
Last Answer : a. Pulse code modulation
Description : EBCDIC stands for a. Extended Binary Coded Decimal Interchange Code b. Extended Bit Code Decimal Interchange Code c. Extended Bit Case Decimal Interchange Code d. Extended Binary Case Decimal Interchange Code
Last Answer : a. Extended Binary Coded Decimal Interchange Code
Description : A stack pointer is a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory. b. a register that decodes and executes 16-bit arithmetic expression. c. The first memory location where a subroutine address is stored. d. a register in which flag bits are stored
Last Answer : a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory.
Description : For a memory with a 16-bit address space, the addressability is a. 16 bits b. 8 bits c. 2^16 bits d. Cannot be determined
Last Answer : d. Cannot be determined
Description : A 32-bit address bus allows access to a memory of capacity(a) 64 Mb (b) 16 Mb (c) 1Gb (d) 4 Gb 2.Which processor structure is pipelined? a) all x80 processors b) all x85 processors c) all x86 processors
Last Answer : c) all x86 processors
Description : Computer instructions written with the use of English words instead of binary machine code is called A) Mnemonics B) Symbolic code C) Gray codes D) Opcode
Description : Which of the following instruction is of logical instructions? i) CPL A ii) JC rel iii) DA A iv) ANL A, Rn v) RR A vi) CPL bit a) i, v b) v, iii, I c) iv, ii d) v, iii, ii
Last Answer : c) iv, i
Description : 8096 write-protected mode, no code can write to memory address between __. a) 2020 to 3FFFH b) 8000 to FFFFH c) 2000 to 3FFFH d) 2020 to 202FH 17. If the __ pin is ___ , then we have the option ... b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal
Last Answer : c) EA, high, external, internal
Description : 8096 write-protected mode, no code can write to memory address between __. a) 2020 to 3FFFH b) 8000 to FFFFH c) 2000 to 3FFFH d) 2020 to 202FH
Last Answer : c) 2000 to 3FFFH
Description : When a subroutine is called, the address of the instruction following the CALL instructions stored in/on the a. stack pointer b. accumulator c. program counter d. stack
Last Answer : d. stack
Description : In 8279, the keyboard entries are debounced and stored in an _________, that is further accessed by the CPU to read the key codes. a) 8-bit FIFO b) 8-byte FIFO c) 16 byte FIFO d) 16 bit FIFO
Last Answer : b) 8-byte FIFO
Description : The least significant bit of the binary number, which is equivalent to any odd decimal number, is: a. 0 b. 1 c. 1 or 0 d. 3
Last Answer : a. 0
Description : BCD is a. Binary Coded Decimal b. Bit Coded Decimal c. Binary Coded Digit d. Bit Coded Digit
Last Answer : a. Binary Coded Decimal
Description : The capacity of this chip is 1KB they are organized in the form of 1024 words with 8 bit word The what is the site of address bus: a. 8 bit b. 10 bit c. 12 bit d. 16 bit
Last Answer : b. 10 bit
Description : Memory access in RISC architecture is limited to instructions a. CALL and RET b. PUSH and POP c. STA and LDA d. MOV and JMP
Last Answer : c. STA and LDA
Description : The instructions for starting the computer are house on a. Random access memory b. CD-Rom c. Read only memory chip
Last Answer : c. Read only memory chip
Description : The process of starting a or restarting a computer system by loading instructions from a secondary storage device into the computer memory is called a. Duping b. Booting c. Padding d. CPS
Last Answer : b. Booting
Description : A microprocessor retries instructions from : a. Control memory b. Cache memory c. Main memory d. Virtual memory
Last Answer : c. Main memory
Description : Given code word 1110001010 is to be transmitted with even parity check bit. The encoded word to be transmitted for this code is (A) 11100010101 (B) 11100010100 (C) 1110001010 (D) 111000101
Last Answer : (A) 11100010101
Description : __is divided into a number of fields and is represented as a sequence of bits: a. instruction b. — instruction set c. instruction code d. parity code
Last Answer : a. instruction
Description : Which of the following is used for manufacturing chips? a. Control bus b. Control unit c. Parity unit d. Semiconductor
Last Answer : d. Semiconductor
Description : A new signal group on the 80486 is the ______. a) PARITY b) DP0-DP3 c) PCHK d) all
Last Answer : b) DP0-DP3
Description : ASCII and EBCDIC are the popular character coding systems. What does EBCDIC stand for? A) Extended Binary Coded Decimal Interchange Code B) Extended Bit Code Decimal Interchange Code C) Extended Bit Case Decimal Interchange Code D) Extended Binary Case Decimal Interchange Code
Last Answer : Answer : A
Description : In linear decoding address bus of 16-bit wide can connect only ____ of RAM. a. 16 KB b. 6KB c. 12KB d. 64KB
Last Answer : b. 6KB
Description : A 16 bit address bus can generate___ addresses: a. 32767 b. 25652 c. 65536 d. none of these
Last Answer : c. 65536
Description : In modes 2 and 3, if _____ bit of SCON bit is set will causes enable multiprocessor communication and is of ____ bit address. a) SM1, 9EH b) TB8 , 9CH c) SM2 , 9DH d) SM0, 9FH
Last Answer : c) SM2 , 9DH
Description : In 8096, CCB bit 3 is ____. a) write strobe mode select b) address valid strobe select c) bus width select d) Internal read control mode
Last Answer : c) bus width select
Last Answer : b) address valid strobe select
Description : In 8086 microprocessor , the address bus is ________ bit wide A. 12 bit B. 10 bit C. 16 bit D. 20 bit
Last Answer : In 8086 microprocessor, the address bus is 20 bit
Description : The proper definition of a modern digital computer is a. An electronic automated machine that can solve problems involving words and numbers b. A more sophistic and modified electronic pocket calculator c. Any machine that can perform mathematical operations d. A machine that works on binary code
Last Answer : d. A machine that works on binary code
Description : Each check bit is grouped with the information bits as specified by a__ a. Parity check code b. Parity check matrix c. Parity check bit d. All of these
Last Answer : b. Parity check matrix
Description : The digital signals can be represented by: a) Binary Codes b) 0 and 1 c) High and Low d) All of The Above e) None of The Above
Last Answer : d) All of The Above
Description : Which is not the main architectural feature of Power PC: a. It is not based on RISC b. Superscalar implementation c. Both 32 & 64 Bit d. Paged Memory management architecture
Last Answer : a. It is not based on RISC
Description : Which processor provided 1 MB memory: a. 16-bit 8086 and 8088 b. 32-bit 8086 and 8088 c. 64-bit 8086 and 8088 d. 8-bit 8086 and 8088
Last Answer : a. 16-bit 8086 and 8088
Description : A stack is a. an 8-bit register in the microprocessor b. a 16-bit register in the microprocessor c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer
Last Answer : c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer
Description : The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register
Last Answer : The microprocessor can read/write 16 bit data from or to memory
Description : What will be the hexadecimal value in the register ax (32-bit) after executing the following instructions? Mov al, 15 Mov ah, 15 Xor al, al Mov cl, 3 Shr ax, cl Codes: (A) 0F00 h (B) 0F0F h (C) 01E0 h (D) FFFF h
Last Answer : (C) 01E0 h
Description : Which type of computers uses the 8-bit code called EBCDIC? a. Minicomputers b. Microcomputers c. Mainframe computers d. Super computer
Last Answer : c. Mainframe computers
Description : The original ASCII code used…bits of each byte, reserving that last bit for error checking a. 5 b. 6 c. 7 d. 8
Last Answer : c. 7
Description : The ___ bit decides whether it is a system descriptor or code/data segment descriptor a) P b) S c) D d) G
Last Answer : a) P
Description : Because we wish to allow each ASCII code to occupy one location in memory, most memories are _____ addressable. a. BYTE b. NIBBLE c. WORD (16 bits) d. DOUBLEWORD (32 bits)
Last Answer : a. BYTE
Description : MICR stands for a. Magnetic Ink Character Reader b. Magnetic Ink Code Reader c. Magnetic Ink Cases Reader d. None
Last Answer : a. Magnetic Ink Character Reader
Description : Pentium Pro can address _____ of memory: a. 4 GB b. 128 GB c. 256 GB d. 512 GB
Last Answer : a. 4 GB