In the manufacture of H3 PO4 (ortho); strong H2 SO4 leaching wet process as compared to electric furnace process (A) Uses lower grade phosphate rock (B) Requires lower capital investment in the plant(C) Produces lower purity acid(D) Is very costly

In the manufacture of H3 PO4
(ortho); strong H2 SO4
leaching wet
process as compared to electric furnace process
(A) Uses lower grade phosphate rock
(B) Requires lower capital investment in the plant
(C) Produces lower purity acid
(D) Is very costly
by

1 Answer

Answer :

(C) Produces lower purity acid
by

Related questions

Electric process as compared to wet process (for the manufacture of phosphoric acid) (A) Can use only high grade phosphate rock (B) Is used less frequently (C) Produces a valuable by-product called gypsum (D) Is weak acid process

Description : Electric process as compared to wet process (for the manufacture of phosphoric acid) (A) Can use only high grade phosphate rock (B) Is used less frequently (C) Produces a valuable by-product called gypsum (D) Is weak acid process

Last Answer : (B) Is used less frequently

Pick out the wrong statement. (A) Dehydration of ammonium carbamate to produce urea is endothermic (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India is suitable (C) Gypsum (CaSO4 . 2H2O) is obtained as a by-product in the wet process for manufacture of ortho-phosphoric acid (D) Phosphate rock when reacted with dilute H2SO4 produces superphosphate

Description : Pick out the wrong statement. (A) Dehydration of ammonium carbamate to produce urea is endothermic (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India ... manufacture of ortho-phosphoric acid (D) Phosphate rock when reacted with dilute H2SO4 produces superphosphate

Last Answer : (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India is suitable

In the manufacture of ortho-phosphoric acid by strong H2SO4 leaching wet process, keeping the reactor temperature above 100°C, results in the formation of undesirable (A) CaSO4 .½ H2O and CaSO4 crystals (B) Pyrophosphoric acid (C) Meta-phosphoric acid (D) All (A), (B) and (C)

Description : In the manufacture of ortho-phosphoric acid by strong H2SO4 leaching wet process, keeping the reactor temperature above 100°C, results in the formation of undesirable (A) CaSO4 .½ H2O and CaSO4 crystals (B) Pyrophosphoric acid (C) Meta-phosphoric acid (D) All (A), (B) and (C)

Last Answer : (A) CaSO4 .½ H2O and CaSO4 crystals

Which of the following solvents is used for the extraction of H3PO4 from CaCl2 solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching? (A) Isopropyl alcohol (B) Butyl alcohol (C) Toluene (D) Hexane

Description : Which of the following solvents is used for the extraction of H3PO4 from CaCl2 solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching? (A) Isopropyl alcohol (B) Butyl alcohol (C) Toluene (D) Hexane

Last Answer : (B) Butyl alcohol

Leaching of phosphate rock by strong __________ acid produces phosphoric acid. (A) Sulphuric (B) Hydrochloric (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : Leaching of phosphate rock by strong __________ acid produces phosphoric acid. (A) Sulphuric (B) Hydrochloric (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

Reaction of ortho-phosphoric acid with phosphate rock produces (A) Superphosphate (B) Triple superphosphate (C) Meta-phosphoric acid (D) Monoammonium phosphate

Description : Reaction of ortho-phosphoric acid with phosphate rock produces (A) Superphosphate (B) Triple superphosphate (C) Meta-phosphoric acid (D) Monoammonium phosphate

Last Answer : (B) Triple superphosphate

Reaction of phosphate rock with 98% H2SO4 produces (A) Ortho-phosphoric acid (B) Superphosphate (C) White phosphorous (D) None of these

Description : Reaction of phosphate rock with 98% H2SO4 produces (A) Ortho-phosphoric acid (B) Superphosphate (C) White phosphorous (D) None of these

Last Answer : (A) Ortho-phosphoric acid

Low grade phosphate rock can be used in electrical furnace, because (A) Of the better CaO/SiO2 balance for slag formation (B) CaO content is less (C) It is cheap (D) It produces low cost product

Description : Low grade phosphate rock can be used in electrical furnace, because (A) Of the better CaO/SiO2 balance for slag formation (B) CaO content is less (C) It is cheap (D) It produces low cost product

Last Answer : (A) Of the better CaO/SiO2 balance for slag formation

Heating of coke, sand & phosphate rock in an electric furnace is done for the manufacture of (A) Phosphoric acid (B) Superphosphate (C) Phosphorous (D) Triple superphosphate

Description : Heating of coke, sand & phosphate rock in an electric furnace is done for the manufacture of (A) Phosphoric acid (B) Superphosphate (C) Phosphorous (D) Triple superphosphate

Last Answer : (C) Phosphorous

Heating a mixture of phosphate rock, coke and sand in an electric furnace produces (A) Phosphoric acid (B) Ammonium phosphate (C) Phosphorous (D) Superphosphate

Description : Heating a mixture of phosphate rock, coke and sand in an electric furnace produces (A) Phosphoric acid (B) Ammonium phosphate (C) Phosphorous (D) Superphosphate

Last Answer : (C) Phosphorous

Electric furnace method for production of phosphorous uses phosphate rock and __________ (A) Phosphoric acid (B) Coke (C) Sulphuric acid (D) Silica and coke

Description : Electric furnace method for production of phosphorous uses phosphate rock and __________ (A) Phosphoric acid (B) Coke (C) Sulphuric acid (D) Silica and coke

Last Answer : (D) Silica and coke

Pick out the wrong statement. (A) Yellow phosphorous which is the most reactive allotropic form of phosphorous is transported under water (B) Apatite is the principal material present in phosphate rock which is chemically Ca10 (PO4 )6 (F, Cl, OH) (C) Urea is more hygroscopic than ammonium nitrate (D) Nitrogen fixation means the process of bringing atmospheric nitrogen into combination i.e. into nitrogen compound fo

Description : Pick out the wrong statement. (A) Yellow phosphorous which is the most reactive allotropic form of phosphorous is transported under water (B) Apatite is the principal material present in ... fixation means the process of bringing atmospheric nitrogen into combination i.e. into nitrogen compound fo

Last Answer : (C) Urea is more hygroscopic than ammonium nitrate

Reaction of ortho-phosphoric acid with soda ash produces (A) Sodium Tributyl phosphate (STPP) (B) Tricresyl phosphate (C) Tributyl phosphate (D) Nitrophosphate

Description : Reaction of ortho-phosphoric acid with soda ash produces (A) Sodium Tributyl phosphate (STPP) (B) Tricresyl phosphate (C) Tributyl phosphate (D) Nitrophosphate

Last Answer : (A) Sodium Tributyl phosphate (STPP)

Reaction of anhydrous liquid ammonia with ortho-phosphoric acid produces (A) Ammonium phosphate (B) Superphosphate (C) Triple superphosphate (D) None of these

Description : Reaction of anhydrous liquid ammonia with ortho-phosphoric acid produces (A) Ammonium phosphate (B) Superphosphate (C) Triple superphosphate (D) None of these

Last Answer : (A) Ammonium phosphate

Triple superphosphate which contains about 46% P2O5 is produced by the reaction of phosphate rock with ortho phosphoric acid of________ percent concentration. (A) 25-28 (B) 52-54 (C) 75-80 (D) > 98

Description : Triple superphosphate which contains about 46% P2O5 is produced by the reaction of phosphate rock with ortho phosphoric acid of________ percent concentration. (A) 25-28 (B) 52-54 (C) 75-80 (D) > 98

Last Answer : (B) 52-54

Electrolytic reduction cell used for conversion of calcined Al2O3to Al is a carbon lined furnace operating at 800-900 °C. The purpose of electric current supplied to the furnace is to (A) Achieve very high purity of aluminium (99.9%) (B) Keep the electrolyte in liquid condition by the generation of heat (C) Electrolytically dissociate alumina (D) Both (B) & (C)

Description : Electrolytic reduction cell used for conversion of calcined Al2O3to Al is a carbon lined furnace operating at 800-900 °C. The purpose of electric current supplied to the furnace is to (A) Achieve very high ... by the generation of heat (C) Electrolytically dissociate alumina (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Diaphragm electrolytic cell as compared to mercury electrolytic cell (A) Produces 70% NaOH solution (B) Requires less specific power consumption for the production of chlorine (C) Requires lesser investment for similar capacity (D) All (A), (B) and (C)

Description : Diaphragm electrolytic cell as compared to mercury electrolytic cell (A) Produces 70% NaOH solution (B) Requires less specific power consumption for the production of chlorine (C) Requires lesser investment for similar capacity (D) All (A), (B) and (C)

Last Answer : (C) Requires lesser investment for similar capacity

Phosphoric acid is produced in wet process from phosphate rock and (A) Dilute H2SO4 (B) Concentrated H2SO4 (C) Concentrated NHO3 (D) Concentrated HCl

Description : Phosphoric acid is produced in wet process from phosphate rock and (A) Dilute H2SO4 (B) Concentrated H2SO4 (C) Concentrated NHO3 (D) Concentrated HCl

Last Answer : (A) Dilute H2SO4

Fusion zone in the electric furnace used for reduction of phosphate rock to elemental phosphorous is maintained at __________ °C. (A) 250-300 (B) 500-750 (C) 950-1050 (D) 1400-1450

Description : Fusion zone in the electric furnace used for reduction of phosphate rock to elemental phosphorous is maintained at __________ °C. (A) 250-300 (B) 500-750 (C) 950-1050 (D) 1400-1450

Last Answer : (D) 1400-1450

A mixture of phosphate rock __________ is heated in an electric furnace to produce phosphorous. (A) Salt & coke (B) Sand & coke (C) And coke (D) And sand

Description : A mixture of phosphate rock __________ is heated in an electric furnace to produce phosphorous. (A) Salt & coke (B) Sand & coke (C) And coke (D) And sand

Last Answer : (B) Sand & coke

Pick out the wrong statement pertaining to nitric acid. (A) About 90% of nitric acid is manufactured by Ostwald's process (B) It is a strong mono basic acid which reacts with almost all the metals except noble metals (C) Yellow color of impure nitric acid is because of dissolved oxides of nitrogen (mainly NO2 ) (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

Description : Pick out the wrong statement pertaining to nitric acid. (A) About 90% of nitric acid is manufactured by Ostwald's process (B) It is a strong mono basic acid which reacts with almost all the ... (mainly NO2 ) (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

Last Answer : (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

Mercury cells for caustic soda manufacture, compared to diaphragm cells (A) Require lower initial investment (B) Require more power (C) Produce lower concentration NaOH (D) None of these

Description : Mercury cells for caustic soda manufacture, compared to diaphragm cells (A) Require lower initial investment (B) Require more power (C) Produce lower concentration NaOH (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Description : Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Last Answer : (D) None of these

In the manufacture of H2SO4 , vanadium catalyst as compared to platinum catalyst (A) Gives higher conversion efficiency (B) Has a longer life and is not poisoned by arsenic (C) Handles lower SO2 content gas (7 -10% SO2 ), thus increasing the capital cost of the plant (D) All (A), (B) and (C)

Description : In the manufacture of H2SO4 , vanadium catalyst as compared to platinum catalyst (A) Gives higher conversion efficiency (B) Has a longer life and is not poisoned by arsenic (C) Handles lower SO2 content gas (7 -10% SO2 ), thus increasing the capital cost of the plant (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

CaH4 (PO4 )2 is the chemical formula of (A) Superphosphate (B) Triple superphosphate (C) Calcium phosphate (D) Meta phosphoric acid

Description : CaH4 (PO4 )2 is the chemical formula of (A) Superphosphate (B) Triple superphosphate (C) Calcium phosphate (D) Meta phosphoric acid

Last Answer : (B) Triple superphosphate

Pick out the wrong statement. (A) 'Green acid' is the other name of phosphoric acid produced by the reaction of phosphate rock & sulphuric acid (B) Chemically unreactive nature of red phosphorous is due to its polymeric structure (C) Red phosphorous is the most reactive allotropic form of phosphorous (D) Red phosphorous, which is used in the manufacture of safety matches, is converted into white phosphorous by vaporisation followed by condensation

Description : Pick out the wrong statement. (A) 'Green acid' is the other name of phosphoric acid produced by the reaction of phosphate rock & sulphuric acid (B) Chemically unreactive nature of ... in the manufacture of safety matches, is converted into white phosphorous by vaporisation followed by condensation

Last Answer : (C) Red phosphorous is the most reactive allotropic form of phosphorous

Phosphate rock is a raw material for the manufacture of (A) Phosphoric acid (B) Phosphorous (C) Superphosphates (D) All (A), (B) and (C)

Description : Phosphate rock is a raw material for the manufacture of (A) Phosphoric acid (B) Phosphorous (C) Superphosphates (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

When, H1 = Total heat of air entering the coil (heating or cooling) H2 = Total heat of air leaving the coil (heating or cooling) H3 = Total heat of air at the end of the process (humidification or dehumidification) then, the sensible heat factor (H2 – H1) / (H3 – H1) represents the process of A. cooling and humidification B. cooling and dehumidification C. heating and humidification D. heating and dehumidification

Description : When, H1 = Total heat of air entering the coil (heating or cooling) H2 = Total heat of air leaving the coil (heating or cooling) H3 = Total heat of air at the end of ... A. cooling and humidification B. cooling and dehumidification C. heating and humidification D. heating and dehumidification

Last Answer : ANSWER : C

Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of concentration ≥ 98% (C) 75% oleum can be produced by distillation of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Description : Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of ... of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Last Answer : (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

What are the advantages of fertigation in agriculture? 1. Controlling the alkalinity of irrigation water is possible. 2. Efficient application of Rock Phosphate and all other phosphatic fertilizers is possible. 3. Increased availability of nutrients to plants is possible. 4. Reduction in the leaching of chemical nutrients is possible. Select the correct answer using the code given below - a) 1, 2 and 3 only b) 1, 2 and 4 only c) 1, 3 and 4 only d) 2, 3 and 4 only

Description : What are the advantages of fertigation in agriculture? 1. Controlling the alkalinity of irrigation water is possible. 2. Efficient application of Rock Phosphate and all other phosphatic fertilizers is possible. 3. Increased availability of ... 1, 2 and 4 only c) 1, 3 and 4 only d) 2, 3 and 4 only

Last Answer : c) 1, 3 and 4 only

The discharge through a V-notch weir varies as (A) H3/2 (B) H1/2 (C) H5/2 (D) H2/3

Description : The discharge through a V-notch weir varies as (A) H3/2 (B) H1/2 (C) H5/2 (D) H2/3

Last Answer : (C) H5/2

Beehive coke oven (A) Facilitates by-products recovery (B) Takes 2-3 days for coking of coal but requires no external fuel for heating (C) Gives larger yield of coke (around 85%) as compared to by-product ovens (D) Produces coke with very poor strength

Description : Beehive coke oven (A) Facilitates by-products recovery (B) Takes 2-3 days for coking of coal but requires no external fuel for heating (C) Gives larger yield of coke (around 85%) as compared to by-product ovens (D) Produces coke with very poor strength

Last Answer : (B) Takes 2-3 days for coking of coal but requires no external fuel for heating

Which of the following has pH value 7? (1) Pure Water (2) H2 SO4 (3) Sodium Carbonate (4) HCl

Description : Which of the following has pH value 7? (1) Pure Water (2) H2 SO4 (3) Sodium Carbonate (4) HCl

Last Answer :  Pure Water

Aquaregia is a mixture of the following in the ratio 1 : 3 by volume (1) conc. HNO3 and conc. HCl (2) conc. HNO3 and conc. H2 SO4 (3) dil. HCl and dil. HNO3 (4) conc. HCl and conc. HNO3

Description : Aquaregia is a mixture of the following in the ratio 1 : 3 by volume (1) conc. HNO3 and conc. HCl (2) conc. HNO3 and conc. H2 SO4 (3) dil. HCl and dil. HNO3 (4) conc. HCl and conc. HNO3

Last Answer : dil. HCl and dil. HNO3

Which among the following is used as a catalyst in the production of high octane fuels? (1) HNO3 (2)H2 SO4 (3) HCl (4) HF

Description : Which among the following is used as a catalyst in the production of high octane fuels? (1) HNO3 (2)H2 SO4 (3) HCl (4) HF

Last Answer : H2 SO4

Glass is soluble in (1) H2 SO4 (2) HClO4 (3) HNO 3 (4) HF

Description : Glass is soluble in (1) H2 SO4 (2) HClO4 (3) HNO 3 (4) HF

Last Answer : HF

When conc. H2 SO4 is added to dry KNO3 , brown fumes are evolved. These fumes are due to (1) SO3 (2) SO2 (3) NO2 (4) N2O

Description : When conc. H2 SO4 is added to dry KNO3 , brown fumes are evolved. These fumes are due to (1) SO3 (2) SO2 (3) NO2 (4) N2O

Last Answer : NO2

Solvay process as compared to dual process (i.e. modified Solvay process). (A) Can use low grade brine (B) Has less corrosion problems (C) Involves higher investment in NH3 recovery units than that for crystallisation units for NH4Cl(D) Both (B) and (C)

Description : Solvay process as compared to dual process (i.e. modified Solvay process). (A) Can use low grade brine (B) Has less corrosion problems (C) Involves higher investment in NH3 recovery units than that for crystallisation units for NH4Cl (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Action of phosphoric acid on rock phosphate produces (A) Superphosphate (B) Triple superphosphate (C) Nitrophosphate (D) Diammonium phosphate

Description : Action of phosphoric acid on rock phosphate produces (A) Superphosphate (B) Triple superphosphate (C) Nitrophosphate (D) Diammonium phosphate

Last Answer : (B) Triple superphosphate

Reaction of nitric acid and sulphuric acid with phosphate rock produces (A) Nitrophosphate (B) Diammonium phosphate (C) Tricresyl phosphate (D) Tributyl phosphate

Description : Reaction of nitric acid and sulphuric acid with phosphate rock produces (A) Nitrophosphate (B) Diammonium phosphate (C) Tricresyl phosphate (D) Tributyl phosphate

Last Answer : (A) Nitrophosphate

Reaction of dilute sulphuric acid with phosphate rock produces (A) Phosphoric acid (B) Superphosphate (C) Triple superphosphate (D) Gypsum

Description : Reaction of dilute sulphuric acid with phosphate rock produces (A) Phosphoric acid (B) Superphosphate (C) Triple superphosphate (D) Gypsum

Last Answer : (A) Phosphoric acid

Reaction of __________ acid with phosphate rock produces superphosphates. (A) Hydrochloric (B) Sulphuric (C) Nitric (D) Phosphoric

Description : Reaction of __________ acid with phosphate rock produces superphosphates. (A) Hydrochloric (B) Sulphuric (C) Nitric (D) Phosphoric

Last Answer : (B) Sulphuric

. Heating of ortho-phosphoric acid to about 900°C, produces (A) Meta-phosphoric acid (B) Pyrophosphoric acid (C) No change in it (D) None of these

Description : . Heating of ortho-phosphoric acid to about 900°C, produces (A) Meta-phosphoric acid (B) Pyrophosphoric acid (C) No change in it (D) None of these

Last Answer : (A) Meta-phosphoric acid

ction of calcium Fluorapatite with sulphuric acid produces (A) Ortho-phosphoric acid (B) Simple superphosphate (C) Triple superphosphate (D) Red phosphorous

Description : ction of calcium Fluorapatite with sulphuric acid produces (A) Ortho-phosphoric acid (B) Simple superphosphate (C) Triple superphosphate (D) Red phosphorous

Last Answer : (B) Simple superphosphate

Heating of ortho-phosphoric acid to 250°C produces (A) Meta-phosphoric acid (B) Pyrophosphoric acid (C) No change in it (D) None of these

Description : Heating of ortho-phosphoric acid to 250°C produces (A) Meta-phosphoric acid (B) Pyrophosphoric acid (C) No change in it (D) None of these

Last Answer : (B) Pyrophosphoric acid

(CH3 C6 H4 )3 PO4 is the chemical formula of (A) Triple superphosphate (B) Tricresyl phosphate (C) Fluorapatite (D) Superphosphate

Description : (CH3 C6 H4 )3 PO4 is the chemical formula of (A) Triple superphosphate (B) Tricresyl phosphate (C) Fluorapatite (D) Superphosphate

Last Answer : (B) Tricresyl phosphate

Tricresyl phosphate is chemically represented as (A) (CH3 C6 H4 )3 PO4 (B) Ca10 (PO4 )3F6 (C) (NH4 )2HPO4 (D) NH4H2PO4

Description : Tricresyl phosphate is chemically represented as (A) (CH3 C6 H4 )3 PO4 (B) Ca10 (PO4 )3F6 (C) (NH4 )2HPO4 (D) NH4H2PO4

Last Answer : (A) (CH3 C6 H4 )3 PO4

Uranium is recovered from its ore (pitchblende) by (A) Froth floatation technique (B) Leaching with sulphuric acid (C) Smelting in a furnace (D) Dissolving in water

Description : Uranium is recovered from its ore (pitchblende) by (A) Froth floatation technique (B) Leaching with sulphuric acid (C) Smelting in a furnace (D) Dissolving in water

Last Answer : (B) Leaching with sulphuric acid

High ash containing coke (A) Produces more slag when used in the blast(B) Has poor strength and abrasion resistance(C) Is desirable in producer gas manufacture(D) None of these furnace

Description : High ash containing coke (A) Produces more slag when used in the blast furnace (B) Has poor strength and abrasion resistance (C) Is desirable in producer gas manufacture (D) None of these

Last Answer : (A) Produces more slag when used in the blast furnace

A ball is allowed to fall freely from a height of 3 metres on to a fixed plate. If the successive rebound heights are h1, h2, h3 a.5 metres b.4.25 metre c.0.5 metre d.1 metre e.Zero

Description : A ball is allowed to fall freely from a height of 3 metres on to a fixed plate. If the successive rebound heights are h1, h2, h3 a.5 metres b.4.25 metre c.0.5 metre d.1 metre e.Zero

Last Answer : a. 5 metres