__________ furnace is generally used in the non-ferrous foundries. (A) Direct arc (B) Indirect arc (C) Resistance (D) Induction

__________ furnace is generally used in the non-ferrous foundries. (A) Direct arc
(B) Indirect arc
(C) Resistance
(D) Induction
by

1 Answer

Answer :

(B) Indirect arc
by

Related questions

State any two applications of each for the following types of electrical heating : (i) Direct resistance heating(ii) Indirect induction heating (iii) Direct.arc heating (iv) Dielectric heating

Description : State any two applications of each for the following types of electrical heating : (i) Direct resistance heating(ii) Indirect induction heating (iii) Direct.arc heating (iv) Dielectric heating

Last Answer : (i) Direct resistance heating:- 1. This type of heating used for industrial purpose 2. Salt bath heating: This utilized for the purpose of carbonizing, tempering, quenching and hardening of steel tools 3. ... purpose. 14)In foundry for heating of sand, core, which are used in molding processes.

An electric furnace producing heat by means of an electric arc struck between each of three electrodes and the charge is called __________ furnace. (A) Resistance (B) Arc (C) Low frequency induction (D) None of these

Description : An electric furnace producing heat by means of an electric arc struck between each of three electrodes and the charge is called __________ furnace. (A) Resistance (B) Arc (C) Low frequency induction (D) None of these

Last Answer : (B) Arc

__________ furnace is not an electric furnace. (A) Arc (B) Induction (C) Pot (D) Resistance

Description : __________ furnace is not an electric furnace. (A) Arc (B) Induction (C) Pot (D) Resistance

Last Answer : (C) Pot

The electric furnace in which heat is produced by a combination of induced current and skin effect is called __________ furnace. (A) Arc(B) Resistance(C) Low frequency induction(D) High frequency induction

Description : The electric furnace in which heat is produced by a combination of induced current and skin effect is called __________ furnace. (A) Arc (B) Resistance (C) Low frequency induction (D) High frequency induction

Last Answer : (D) High frequency induction

Main use of hard coke produced by high temperature carbonisation is in the (A) Iron blast furnace (B) Cupola in foundries (C) Sinter making (D) Domestic ovens

Description : Main use of hard coke produced by high temperature carbonisation is in the (A) Iron blast furnace (B) Cupola in foundries (C) Sinter making (D) Domestic ovens

Last Answer : (A) Iron blast furnace

Power-factor of industrial arc and induction furnace is:

Description : Power-factor of industrial arc and induction furnace is:

Last Answer : Power-factor of industrial arc and induction furnace is: very low lagging

or efficient performance of a blast furnace, the extent of reduction of Wustite (FeO) should be (A) 100% indirect reduction (B) 100% direct reduction (C) 50-60% indirect reduction (D) 30-40% indirect reduction

Description : or efficient performance of a blast furnace, the extent of reduction of Wustite (FeO) should be (A) 100% indirect reduction (B) 100% direct reduction (C) 50-60% indirect reduction (D) 30-40% indirect reduction

Last Answer : (C) 50-60% indirect reduction

or efficient performance of a blast furnace, the extent of reduction of Wustite (FeO) should be (A) 100% indirect reduction (B) 100% direct reduction (C) 50-60% indirect reduction (D) 30-40% indirect reduction

Description : or efficient performance of a blast furnace, the extent of reduction of Wustite (FeO) should be (A) 100% indirect reduction (B) 100% direct reduction (C) 50-60% indirect reduction (D) 30-40% indirect reduction

Last Answer : (C) 50-60% indirect reduction

In the heating process of the ________type a simple method of temperature control is possible by means of a special alloy which loses its magnetic properties at a particular high temperature and regains them when cooled to a temperature below this value. (A) Indirect induction over (B) core type induction furnace (C) coreless induction furnace (D) high frequency eddy current

Description : In the heating process of the ________type a simple method of temperature control is possible by means of a special alloy which loses its magnetic properties at a particular high temperature and regains ... ) core type induction furnace (C) coreless induction furnace (D) high frequency eddy current

Last Answer : Ans: D Magnetic property of alloy changes with change of the temperature and Heat is produced due to eddy current = i2R and i α f2

Generally __________ are subjected to galvanising (i.e., zinc coating). (A) Non-ferrous metals (B) Non-metals (C) Low carbon steels (D) Stainless steel

Description : Generally __________ are subjected to galvanising (i.e., zinc coating). (A) Non-ferrous metals (B) Non-metals (C) Low carbon steels (D) Stainless steel

Last Answer : (C) Low carbon steels

The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

Description : The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

Last Answer : (B) Flow of current through a heating element

The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel. (A) 60 - 100 (B) 400 - 700 (C) 1200 -1500 (D) 2000 - 2300

Description : The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel. (A) 60 - 100 (B) 400 - 700 (C) 1200 -1500 (D) 2000 - 2300

Last Answer : (B) 400 - 700

Out of the following methods of heating the one which is independent of supply frequency is (A) electric arc heating (B) induction heating (C) electric resistance heating (D) dielectric heating

Description : Out of the following methods of heating the one which is independent of supply frequency is (A) electric arc heating (B) induction heating (C) electric resistance heating (D) dielectric heating

Last Answer : (C) electric resistance heating

Galvanising is generally done on (A) Non-ferrous metals (B) Low carbon steel (C) Stainless steel (D) Cast iron

Description : Galvanising is generally done on (A) Non-ferrous metals (B) Low carbon steel (C) Stainless steel (D) Cast iron

Last Answer : (B) Low carbon steel

Sand is dried in foundries in a _________drier. (A) Rotary (B) Fluidised bed (C) Vacuum (D) Spray

Description : Sand is dried in foundries in a _________drier. (A) Rotary (B) Fluidised bed (C) Vacuum (D) Spray

Last Answer : (B) Fluidised bed

Inhalation of silica dust by human being during hand drilling in mica mining, lead & zinc mining, silica refractory manufacture and in foundries causes (A) Asphyxiation (suffocation) (B) Shortness of breath (C) Tuberculosis (D) All (A), (B) and (C)

Description : Inhalation of silica dust by human being during hand drilling in mica mining, lead & zinc mining, silica refractory manufacture and in foundries causes (A) Asphyxiation (suffocation) (B) Shortness of breath (C) Tuberculosis (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In low or standard frequency induction furnace, heat is produced by the (A) Combination of induced current and skin effect (B) Induction and resistance (C) Current flow through a heating element (D) None of these

Description : In low or standard frequency induction furnace, heat is produced by the (A) Combination of induced current and skin effect (B) Induction and resistance (C) Current flow through a heating element (D) None of these

Last Answer : (B) Induction and resistance

Presence of SO2 in furnace gases attacks the ferrous metal by way of (A) Accelerating the rate of scaling (B) Causing metal embrittlement (C) Attacking the grain boundaries; particularly severe on low carbon and nickel bearing steels at high temperature (D) All (A), (B) and (C)

Description : Presence of SO2 in furnace gases attacks the ferrous metal by way of (A) Accelerating the rate of scaling (B) Causing metal embrittlement (C) Attacking the grain boundaries; particularly severe on low carbon and nickel bearing steels at high temperature (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Suspended solid present in the waste water generated in blast furnace gas cooling and cleaning plant is removed by (A) Biological oxygen pond (B) Radial settling tank (thickener) using coagulant (lime & ferrous sulphate) (C) Lagoons (D) Filtration

Description : Suspended solid present in the waste water generated in blast furnace gas cooling and cleaning plant is removed by (A) Biological oxygen pond (B) Radial settling tank (thickener) using coagulant (lime & ferrous sulphate) (C) Lagoons (D) Filtration

Last Answer : (B) Radial settling tank (thickener) using coagulant (lime & ferrous sulphate)

Non-ferrous alloys used for making cutting tools need not have high (A) Abrasion resistance (B) Toughness (C) Red hardness (D) Cutting speed

Description : Non-ferrous alloys used for making cutting tools need not have high (A) Abrasion resistance (B) Toughness (C) Red hardness (D) Cutting speed

Last Answer : (C) Red hardness

Collapsible tubes for tooth paste are produced by __________ extrusion. (A) Direct (B) Indirect (C) Impact (D) None of these

Description : Collapsible tubes for tooth paste are produced by __________ extrusion. (A) Direct (B) Indirect (C) Impact (D) None of these

Last Answer : (C) Impact

Which type of welding is generally used in automobile sector? a) Electric arc welding b) Electric resistance welding c) Gas welding d) Forge welding

Description : Which type of welding is generally used in automobile sector? a) Electric arc welding b) Electric resistance welding c) Gas welding d) Forge welding

Last Answer : b) Electric resistance welding

The refractory lining of the bottom in a basic electric arc furnace is made of (A) Silica (B) Alumina (C) Magnesia (D) Fireclay

Description : The refractory lining of the bottom in a basic electric arc furnace is made of (A) Silica (B) Alumina (C) Magnesia (D) Fireclay

Last Answer : Option C

Non-ferrous metals and hard steels do not exhibit a definite yield point, when pulled in the testing machine and hence for these cases, a better measure of their elastic properties is defined by the __________ stress. (A) Ultimate (B) Yield point (C) Proof (D) None of these

Description : Non-ferrous metals and hard steels do not exhibit a definite yield point, when pulled in the testing machine and hence for these cases, a better measure of their elastic properties is defined by the __________ stress. (A) Ultimate (B) Yield point (C) Proof (D) None of these

Last Answer : (C) Proof

Stellite is a __________ material. (A) Ferrous (B) Ceramic (C) Cemented carbide (D) Non-ferrous cast alloy cutting tool

Description : Stellite is a __________ material. (A) Ferrous (B) Ceramic (C) Cemented carbide (D) Non-ferrous cast alloy cutting tool

Last Answer : (D) Non-ferrous cast alloy cutting tool

__________ is the trade name assigned to a non-ferrous cast alloy composed of cobalt, chromium & tungsten. (A) Stellite (B) High speed steel (C) Cermet (D) Alnico

Description : __________ is the trade name assigned to a non-ferrous cast alloy composed of cobalt, chromium & tungsten. (A) Stellite (B) High speed steel (C) Cermet (D) Alnico

Last Answer : Option A

Consumable electrodes are used in the __________ welding. (A) Gas (B) Arc (C) Thermit (D) Resistance

Description : Consumable electrodes are used in the __________ welding. (A) Gas (B) Arc (C) Thermit (D) Resistance

Last Answer : (B) Arc

Projection welding & stud welding is categorised as the __________ welding. (A) Pressure (B) Thermit (C) Resistance (D) Arc

Description : Projection welding & stud welding is categorised as the __________ welding. (A) Pressure (B) Thermit (C) Resistance (D) Arc

Last Answer : C) Resistance

In the email campaign, __________ delivers the advertisements into the group of targeted customers. a. Spoofing b. Indirect email marketing c. Direct email marketing d. Spamming

Description : In the email campaign, __________ delivers the advertisements into the group of targeted customers. a. Spoofing b. Indirect email marketing c. Direct email marketing d. Spamming

Last Answer : c. Direct email marketing

Relationship between GFR and seum creatinine concentration is (A) Non-existent (B) Inverse (C) Direct (D) Indirect

Description : Relationship between GFR and seum creatinine concentration is (A) Non-existent (B) Inverse (C) Direct (D) Indirect

Last Answer : Answer : B

While preparing Cash Flow Statement, non-cash items and non-operating items are not required to be adjusted under________ A. Indirect method B. Direct method C. Both a and b D. None of the above

Description : While preparing Cash Flow Statement, non-cash items and non-operating items are not required to be adjusted under________ A. Indirect method B. Direct method C. Both a and b D. None of the above

Last Answer : B. Direct method

A current `i` ampere flows in a circular arc of wire whose radius is `R`, which subtend an angle `3pi//2` radian at its centre. The magnetic induction

Description : A current `i` ampere flows in a circular arc of wire whose radius is `R`, which subtend an angle `3pi//2` radian at its centre. The magnetic induction

Last Answer : A current `i` ampere flows in a circular arc of wire whose radius is `R`, which subtend an angle `3pi//2` radian at ... 0)i)/(R )` D. `3mu_(0)i)/(8R)`

Indirect contact heat exchangers are preferred over direct contact heat exchangers, because (A) Heat transfer co-efficient are high (B) There is no risk of contamination (C) There is no mist formation (D) Cost of equipment is lower

Description : Indirect contact heat exchangers are preferred over direct contact heat exchangers, because (A) Heat transfer co-efficient are high (B) There is no risk of contamination (C) There is no mist formation (D) Cost of equipment is lower

Last Answer : (B) There is no risk of contamination

. By-products recovery process from coal carbonisation is termed asdirect, indirect and semi direct process depending upon the method of recovery of (A) Tar (B) Benzol (C) Ammonia (D) None of these

Description : . By-products recovery process from coal carbonisation is termed asdirect, indirect and semi direct process depending upon the method of recovery of (A) Tar (B) Benzol (C) Ammonia (D) None of these

Last Answer : (C) Ammonia

The 'total capital investment' for a chemical process plant comprises of the fixed capital investment and the (A) Overhead cost (B) Working capital (C) Indirect production cost (D) Direct production cost

Description : The 'total capital investment' for a chemical process plant comprises of the fixed capital investment and the (A) Overhead cost (B) Working capital (C) Indirect production cost (D) Direct production cost

Last Answer : (B) Working capital

The amount of combustible escaping unconsumed from the furnace, depends upon the (A) Air supplied and furnace temperature (B) Burner design (thoroughness of mixing versus stratification) (C) Air preheat and the flow of gases in the furnace (mixing by induction, by acceleration or by change of direction) (D) All (A), (B) and (C)

Description : The amount of combustible escaping unconsumed from the furnace, depends upon the (A) Air supplied and furnace temperature (B) Burner design (thoroughness of mixing versus stratification) (C) Air preheat and the flow of ... , by acceleration or by change of direction) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

__________ is not a fertiliser. (A) Calcium ammonium nitrate (B) Ferrous sulphate (C) Liquid ammonia (D) Ammonium sulphate

Description : __________ is not a fertiliser. (A) Calcium ammonium nitrate (B) Ferrous sulphate (C) Liquid ammonia (D) Ammonium sulphate

Last Answer : (B) Ferrous sulphate

Transformation range for ferrous material is the temperature interval during which __________ is formed during its heating. (A) Cementite (B) Austenite (C) Martensite (D) Pearlite

Description : Transformation range for ferrous material is the temperature interval during which __________ is formed during its heating. (A) Cementite (B) Austenite (C) Martensite (D) Pearlite

Last Answer : Option B

Which of the following is not a non-ferrous alloy? (A) Meehanite (B) Magnalium (C) Gun metal (D) Muntz metal

Description : Which of the following is not a non-ferrous alloy? (A) Meehanite (B) Magnalium (C) Gun metal (D) Muntz metal

Last Answer : (A) Meehanite

Nickel as a material of construction (A) Is used as an alloying element for both ferrous & non-ferrous alloys (B) Is paramagnetic below 415° C (its Curie temperature) (C) Diamagnetic (D) Has a body centred cubic (bcc) crystal lattice structure

Description : Nickel as a material of construction (A) Is used as an alloying element for both ferrous & non-ferrous alloys (B) Is paramagnetic below 415° C (its Curie temperature) (C) Diamagnetic (D) Has a body centred cubic (bcc) crystal lattice structure

Last Answer : (A) Is used as an alloying element for both ferrous & non-ferrous alloys

Brazing is the joining of metals (A) Without melting the base metal (B) With a non-ferrous filler (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Brazing is the joining of metals (A) Without melting the base metal (B) With a non-ferrous filler (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : Option C

Oxide layer formed on the non-ferrous metal surface after its annealing is (A) Removed by acid pickling (B) Hammered into the surface (C) Removed with coarse emery cloth

Description : Oxide layer formed on the non-ferrous metal surface after its annealing is (A) Removed by acid pickling (B) Hammered into the surface (C) Removed with coarse emery cloth

Last Answer : Option A

In an AC generator, direct current from a separate source is passed through the windings of the rotor _____________. A. by means of slip rings and brushes B. by means of a commutator C. by means of rotating bar magnet D. to minimize the danger of arc over

Description : In an AC generator, direct current from a separate source is passed through the windings of the rotor _____________. A. by means of slip rings and brushes B. by means of a commutator C. by means of rotating bar magnet D. to minimize the danger of arc over

Last Answer : Answer: A

The pigment used in paints for corrosive resistance, is (A) White lead (B) Ferrous oxide (C) Zinc white (D) Red lead

Description : The pigment used in paints for corrosive resistance, is (A) White lead (B) Ferrous oxide (C) Zinc white (D) Red lead

Last Answer : Answer: Option D

Rails in the field are generally welded by using a) Thermit welding b) Gas welding c) Electric arc welding d) Forge welding

Description : Rails in the field are generally welded by using a) Thermit welding b) Gas welding c) Electric arc welding d) Forge welding

Last Answer : a) Thermit welding

The radius of curvature of the arc of the bubble tube is generally kept (A) 10 m (B) 25 m (C) 50 m (D) 100 m

Description : The radius of curvature of the arc of the bubble tube is generally kept (A) 10 m (B) 25 m (C) 50 m (D) 100 m

Last Answer : (D) 100 m

Which one do you think is more damaging; the 'indirect humiliation' or the 'direct humiliation'?

Description : Which one do you think is more damaging; the 'indirect humiliation' or the 'direct humiliation'?

Last Answer : answer:Actually, the scenario that you describe is only humiliating to the object if that person feels inferior. It is, however, directly humiliating to the speaker.

How to solve direct and indirect/inverse variation problem?

Description : How to solve direct and indirect/inverse variation problem?

Last Answer : .just talk your way thru this ... 1. wire2 is 3 x longer than wire1 .... thus resistance of wire2 has to be 3 x larger than wire1 on the basis of length, alone. 2. wire 2 has a diameter that is 1.5 x larger than wire1 . ... L1/D1^^2 R2 =k * 3*L1/(1.5*D1)^^2 ... you can solve it from there ... ..

What is the difference between direct and indirect development? -Biology

Description : What is the difference between direct and indirect development? -Biology

Last Answer : answer: