If a mass whose moment of inertia is Ic/3 is placed at the free end and the constraint is assumed to be of negligible mass, then the kinetic energy is ______ a) 1/6 Icω 2 b) 1/2Icω 2 c) 1/3Icω 2 d) 1/12Icω 2

If a mass whose moment of inertia is Ic/3 is placed at the free end and the constraint
is assumed to be of negligible mass, then the kinetic energy is ______
a) 1/6 Icω 2
b) 1/2Icω 2
c) 1/3Icω 2
d) 1/12Icω 2
by

1 Answer

Answer :

a) 1/6 Icω 2
by

Related questions

If the mass of the constraint is negligible then what is the kinetic energy of the system? a) 0 b) Half the value c) Double the value d) Infinite

Description : If the mass of the constraint is negligible then what is the kinetic energy of the system? a) 0 b) Half the value c) Double the value d) Infinite

Last Answer : a) 0

If Ic = 125 Kg-m 2 and ω= 20 rad/s, calculate the kinetic of the constraint. a) 8333 J b) 7333 J c) 6333 J d) 9333 J

Description : If Ic = 125 Kg-m 2 and ω= 20 rad/s, calculate the kinetic of the constraint. a) 8333 J b) 7333 J c) 6333 J d) 9333 J

Last Answer : a) 8333 J

If the mass moment of inertia is increased to four times, then what will be the effect on free torsional vibrations of a single motor system? a) Increases 4 times b) Increases 2 times c) Decreases 4 times d) Decreases 2 times

Description : If the mass moment of inertia is increased to four times, then what will be the effect on free torsional vibrations of a single motor system? a) Increases 4 times b) Increases 2 times c) Decreases 4 times d) Decreases 2 times

Last Answer : d) Decreases 2 times

Increasing which of the following factor would result in increase of free torsional vibration? A. Radius of gyration B. Mass moment of inertia C. Polar moment of inertia D. Length

Description : Increasing which of the following factor would result in increase of free torsional vibration? A. Radius of gyration B. Mass moment of inertia C. Polar moment of inertia D. Length

Last Answer : C. Polar moment of inertia

Which of the following relation is correct regarding free torsional vibrations of a single motor system? a) Independent of modulus of rigidity b) Independent of polar moment of inertia c) Dependent on mass moment of inertia d) Independent of length of shaft

Description : Which of the following relation is correct regarding free torsional vibrations of a single motor system? a) Independent of modulus of rigidity b) Independent of polar moment of inertia c) Dependent on mass moment of inertia d) Independent of length of shaft

Last Answer : c) Dependent on mass moment of inertia

Increasing which of the following factor would result in increase of free torsional vibration? a) Radius of gyration b) Mass moment of inertiac) Polar moment of inertia d) Length

Description : Increasing which of the following factor would result in increase of free torsional vibration? a) Radius of gyration b) Mass moment of inertiac) Polar moment of inertia d) Length

Last Answer : c) Polar moment of inertia

For a two-rotor system, the length of one shaft (A) is twice the other (B), then what is the relation between the mass moment of inertia of the shafts. A 2I(A) = I(B) B I(A) = 2I(B) C I(A) = I(B) D 2I(A) = 3I(B)

Description : For a two-rotor system, the length of one shaft (A) is twice the other (B), then what is the relation between the mass moment of inertia of the shafts. A 2I(A) = I(B) B I(A) = 2I(B) C I(A) = I(B) D 2I(A) = 3I(B)

Last Answer : A 2I(A) = I(B)

If the polar moment of inertia is increased to four times, then what will be the effect on free torsional vibrations of a single motor system? A. Increases 4 times B. Increases 2 times C. Decreases 4 times D. Decreases 2 times

Description : If the polar moment of inertia is increased to four times, then what will be the effect on free torsional vibrations of a single motor system? A. Increases 4 times B. Increases 2 times C. Decreases 4 times D. Decreases 2 times

Last Answer : B. Increases 2 times

If the polar moment of inertia is increased to four times, then what will be the effect on free torsional vibrations of a single motor system? a) Increases 4 times b) Increases 2 times c) Decreases 4 times d) Decreases 2 times

Description : If the polar moment of inertia is increased to four times, then what will be the effect on free torsional vibrations of a single motor system? a) Increases 4 times b) Increases 2 times c) Decreases 4 times d) Decreases 2 times

Last Answer : b) Increases 2 times

An increase in the mass moment of inertia results in ________ in vibration frequency. A. increase B. decrease C. unchanged D. none of the above

Description : An increase in the mass moment of inertia results in ________ in vibration frequency. A. increase B. decrease C. unchanged D. none of the above

Last Answer : B. decrease

Which formula is used to calculate mass moment of inertia (I G ) of a circular rim about the axis through centre of gravity? a. mr 2 /2b. mr 2 /12 c. mr 2 /4 d. mr 2

Description : Which formula is used to calculate mass moment of inertia (I G ) of a circular rim about the axis through centre of gravity? a. mr 2 /2b. mr 2 /12 c. mr 2 /4 d. mr 2

Last Answer : d. mr 2

Free torsional vibrations of a single motor system increases with increase in polar moment of inertia. a) True b) False

Description : Free torsional vibrations of a single motor system increases with increase in polar moment of inertia. a) True b) False

Last Answer : b) False

Calculate the Polar moment of inertia in m 4 of a single motor system from the following data: C = 8 GN/m 2 , L=9m, I = 600 Kg-m 2 , f=10 Hz a) 0.00027b) 0.00032 c) 0.00045 d) 0.00078

Description : Calculate the Polar moment of inertia in m 4 of a single motor system from the following data: C = 8 GN/m 2 , L=9m, I = 600 Kg-m 2 , f=10 Hz a) 0.00027b) 0.00032 c) 0.00045 d) 0.00078

Last Answer : a) 0.00027

Often an unbalance of forces is produced in rotary or reciprocating machinery due to the ______ * 1 point (A) Centripetal forces (B) Centrifugal forces (C) Friction forces (D) Inertia forces

Description : Often an unbalance of forces is produced in rotary or reciprocating machinery due to the ______ * 1 point (A) Centripetal forces (B) Centrifugal forces (C) Friction forces (D) Inertia forces

Last Answer : (D) Inertia forces

If frequency of excitation of a forced vibration system with negligible damping is very close to natural frequency of the system, then the system will A) Execute harmonic motion of large amplitude B) Beat with a very high peak amplitude C) Perform aperiodic motion D) None of the above

Description : If frequency of excitation of a forced vibration system with negligible damping is very close to natural frequency of the system, then the system will A) Execute harmonic motion of large amplitude B) Beat with a very high peak amplitude C) Perform aperiodic motion D) None of the above

Last Answer : A) Execute harmonic motion of large amplitude

f the length inertia is decreased to nine times, then what will be the effect on free torsional vibrations of a single motor system? a) Increases 3 times b) Increases 9 times c) Decreases 9 times d) Decreases 3 times

Description : f the length inertia is decreased to nine times, then what will be the effect on free torsional vibrations of a single motor system? a) Increases 3 times b) Increases 9 times c) Decreases 9 times d) Decreases 3 times

Last Answer : a) Increases 3 times

The equation of motion for spring mass system includes A. Inertia Force B. Spring Force C. Both D. Gravitational force

Description : The equation of motion for spring mass system includes A. Inertia Force B. Spring Force C. Both D. Gravitational force

Last Answer : C. Both

A cantilever shaft has a diameter of 6 cm and the length is 40cm, it has a disc of mass 125 kg at its free end. The Young’s modulus for the shaft material is 250 GN/m2. Calculate the static deflection in nm. a) 0.001 b) 0.083c) 1.022 d) 0.065

Description : A cantilever shaft has a diameter of 6 cm and the length is 40cm, it has a disc of mass 125 kg at its free end. The Young’s modulus for the shaft material is 250 GN/m2. Calculate the static deflection in nm. a) 0.001 b) 0.083c) 1.022 d) 0.065

Last Answer : a) 0.001

Which of the following pair will have identical dimensions? a.Pressure and surface tension b.Work and kinetic energy c.Momentum and force d.Moment of inertia and angular momentum e.None of the above

Description : Which of the following pair will have identical dimensions? a.Pressure and surface tension b.Work and kinetic energy c.Momentum and force d.Moment of inertia and angular momentum e.None of the above

Last Answer : c. Momentum and force

In a collision, which of the following four quantities is always conserved? w) momentum x) kinetic energy y) torque z) moment of inertia

Description : In a collision, which of the following four quantities is always conserved? w) momentum x) kinetic energy y) torque z) moment of inertia

Last Answer : ANSWER: W -- MOMENTUM

An ice skater is rotating with her arms extended. When she pulls in her arms her rate of rotation increases. Which of the following statements dealing with the process is TRUE? w) Her moment of inertia is increased. x) Kinetic energy is conserved. y) The skater does work when pulling in her arms. z) Angular momentum is increased.

Description : An ice skater is rotating with her arms extended. When she pulls in her arms her rate of rotation increases. Which of the following statements dealing with the process is TRUE? w) Her moment of ... conserved. y) The skater does work when pulling in her arms. z) Angular momentum is increased.

Last Answer : ANSWER: Y -- THE SKATER DOES WORK WHEN PULLING IN HER ARMS 

According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? * 1 point (A) Energy method (B) Rayleigh's method (C) Equilibrium method (D) All of the above

Description : According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? * 1 point (A) Energy method (B) Rayleigh's method (C) Equilibrium method (D) All of the above

Last Answer : (B) Rayleigh's method

As per Energy Method, the summation of kinetic energy and potential energy must be ________ which is same at all the times. A zeroB minimum C maximum D constant

Description : As per Energy Method, the summation of kinetic energy and potential energy must be ________ which is same at all the times. A zeroB minimum C maximum D constant

Last Answer : D constant

According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? A Energy method B Rayleigh’s method C Equilibrium method D All of the above

Description : According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? A Energy method B Rayleigh’s method C Equilibrium method D All of the above

Last Answer : B Rayleigh’s method

According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position A Energy method B Rayleigh's method C Equilibrium method D None of the mentioned

Description : According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position A Energy method B Rayleigh's method C Equilibrium method D None of the mentioned

Last Answer : B Rayleigh's method

In energy method for finding frequency of the system A The sum of kinetic and potential energy is constant B The sum of kinetic and potential energy is zero C Frequency cannot be determined by energy method D None of the mentioned

Description : In energy method for finding frequency of the system A The sum of kinetic and potential energy is constant B The sum of kinetic and potential energy is zero C Frequency cannot be determined by energy method D None of the mentioned

Last Answer : A The sum of kinetic and potential energy is constant

According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? A. Energy method B. Rayleigh's method C. Equilibrium method D. All of the above

Description : According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? A. Energy method B. Rayleigh's method C. Equilibrium method D. All of the above

Last Answer : C. Equilibrium method

As per Energy Method, the summation of kinetic energy and potential energy must be ________ which is same at all the times. A. zero B. minimum C. maximum D. constant

Description : As per Energy Method, the summation of kinetic energy and potential energy must be ________ which is same at all the times. A. zero B. minimum C. maximum D. constant

Last Answer : D. constant

According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? A) Energy method B) Rayleigh's method C) Equilibrium method B) All of the above

Description : According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? A) Energy method B) Rayleigh's method C) Equilibrium method B) All of the above

Last Answer : B) Rayleigh's method

According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? A) Energy methodB) Rayleigh's method C) Equilibrium method D) All of the above

Description : According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? A) Energy methodB) Rayleigh's method C) Equilibrium method D) All of the above

Last Answer : B) Rayleigh's method

As per Energy Method, the summation of kinetic energy and potential energy must D be ________ which is same at all the times. ( A ) zero ( B ) minimum ( C ) maximum ( D ) constant

Description : As per Energy Method, the summation of kinetic energy and potential energy must D be ________ which is same at all the times. ( A ) zero ( B ) minimum ( C ) maximum ( D ) constant

Last Answer : ( D ) constant

According to which method, maximum kinetic energy at mean position is equal to B maximum potential energy at extreme position? (A) Energy method (B) Rayleigh’s method (C) Equilibrium method (D) All of the above

Description : According to which method, maximum kinetic energy at mean position is equal to B maximum potential energy at extreme position? (A) Energy method (B) Rayleigh’s method (C) Equilibrium method (D) All of the above

Last Answer : (B) Rayleigh’s method

According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? a. Energy method b. Rayleigh's method c. Equilibrium method d. All of the above

Description : According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? a. Energy method b. Rayleigh's method c. Equilibrium method d. All of the above

Last Answer : b. Rayleigh's method

In Rayleigh’s method, the _____________ at the mean position is equal to the maximum potential energy (or strain energy) at the extreme position. (A) minimum kinetic energy (B) minimum potential energy (C) maximum kinetic energy (D) none of the above

Description : In Rayleigh’s method, the _____________ at the mean position is equal to the maximum potential energy (or strain energy) at the extreme position. (A) minimum kinetic energy (B) minimum potential energy (C) maximum kinetic energy (D) none of the above

Last Answer : (C) maximum kinetic energy

As per Energy Method, the summation of kinetic energy and potential energy must be ________ which is same at all the times. (A) zero (B) minimum (C) maximum (D) constant

Description : As per Energy Method, the summation of kinetic energy and potential energy must be ________ which is same at all the times. (A) zero (B) minimum (C) maximum (D) constant

Last Answer : (D) constant

A cantilever shaft having 50 mm diameter and a length of 300mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m^2. Determine the static deflection of shaft in mm. A 0.144 B 0.244 C 0.344 D 0.444

Description : A cantilever shaft having 50 mm diameter and a length of 300mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m^2. Determine the static deflection of shaft in mm. A 0.144 B 0.244 C 0.344 D 0.444

Last Answer : A 0.144

A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free enD. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. A. 575B. 625 C. 525 D. 550

Description : A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free enD. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. A. 575B. 625 C. 525 D. 550

Last Answer : A. 575

The time period of a simple pendulum does not depend upon the mass of the body suspended at the free end of the string. This statement is known as ___________ . (A) law of gravity (B) law of mass (C) law of isochronism (D) law of length

Description : The time period of a simple pendulum does not depend upon the mass of the body suspended at the free end of the string. This statement is known as ___________ . (A) law of gravity (B) law of mass (C) law of isochronism (D) law of length

Last Answer : (B) law of mass

A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 3 . Determine the static deflection of the shaft in mm. a) 0.147 b) 0.213 c) 0.132 d) 0.112

Description : A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 3 . Determine the static deflection of the shaft in mm. a) 0.147 b) 0.213 c) 0.132 d) 0.112

Last Answer : a) 0.147

A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Determine the frequency of transverse vibrations of the shaft. a) 31 b) 35 c) 37 d) 41

Description : A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Determine the frequency of transverse vibrations of the shaft. a) 31 b) 35 c) 37 d) 41

Last Answer : d) 41

A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. a) 575 b) 625 c) 525 d) 550

Description : A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. a) 575 b) 625 c) 525 d) 550

Last Answer : a) 575

In Fullarton Tachometer, a thin strip with a ______ is attached at one of its ends. (A) mass (B) spring (C) damper (D) shaft

Description : In Fullarton Tachometer, a thin strip with a ______ is attached at one of its ends. (A) mass (B) spring (C) damper (D) shaft

Last Answer : (A) mass

Untuned viscous damper ( houdaille Damper) is used with variable speed machine being control by ratio can be given by A) (damper inertia) / (main system inertia) B) (main system inertia) / (damper inertia) C) (2 X damper inertia) / (main system inertia) D) (2 X main system inertia) / (damper inertia)

Description : Untuned viscous damper ( houdaille Damper) is used with variable speed machine being control by ratio can be given by A) (damper inertia) / (main system inertia) B) (main system inertia) / (damper inertia) ... X damper inertia) / (main system inertia) D) (2 X main system inertia) / (damper inertia)

Last Answer : A) (damper inertia) / (main system inertia)

Untuned viscous damper ( houdaille Damper) is used with variable speed machine being control by ratio can be given by A) (damper inertia) / (main system inertia) B) (main system inertia) / (damper inertia) C) (2 X damper inertia) / (main system inertia) D) (2 X main system inertia) / (damper inertia)

Description : Untuned viscous damper ( houdaille Damper) is used with variable speed machine being control by ratio can be given by A) (damper inertia) / (main system inertia) B) (main system inertia) / (damper inertia) ... X damper inertia) / (main system inertia) D) (2 X main system inertia) / (damper inertia)

Last Answer : A) (damper inertia) / (main system inertia)

A rectangle-shaped open-to-sky tank of water has a length of 2 m and a width of 1 m. If the atmospheric pressure is assumed to be 100 kPa and thickness of the tank walls is assumed to be negligible, the force exerted by the atmosphere on the surface of water is A. 20 kN B. 50 kN C. 100 kN D. 200 kN

Description : A rectangle-shaped open-to-sky tank of water has a length of 2 m and a width of 1 m. If the atmospheric pressure is assumed to be 100 kPa and thickness of the tank walls is assumed to be negligible, the force exerted by ... of water is A. 20 kN B. 50 kN C. 100 kN D. 200 kN

Last Answer : 200 kN

To obtain integrated form of Clausius-Clapeyron equation, ln (P2/P1) = (∆HV/R) (1/T1- 1/T2) from the exact Clapeyron equation, it is assumed that the (A) Volume of the liquid phase is negligible compared to that of vapour phase (B) Vapour phase behaves as an ideal gas (C) Heat of vaporisation is independent of temperature (D) All (A), (B) & (C)

Description : To obtain integrated form of Clausius-Clapeyron equation, ln (P2/P1) = (∆HV/R) (1/T1- 1/T2) from the exact Clapeyron equation, it is assumed that the (A) Volume of the liquid phase is negligible compared to ... gas (C) Heat of vaporisation is independent of temperature (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Select incorrect statement from the following. In the Virtual work method, it is generally assumed that [ A ] Elastic deformations in the slab are negligible [ B ] Plastic deformations in the slab are negligible [ C ] Plastic deformations takes place at the yield lines [ D ] Both (a) and (b)

Description : Select incorrect statement from the following. In the Virtual work method, it is generally assumed that [ A ] Elastic deformations in the slab are negligible [ B ] Plastic deformations in the slab are negligible [ C ] Plastic deformations takes place at the yield lines [ D ] Both (a) and (b)

Last Answer : [ B ] Plastic deformations in the slab are negligible

If the mass increases, then the frequency of the free vibrations increases. a) True b) False

Description : If the mass increases, then the frequency of the free vibrations increases. a) True b) False

Last Answer : b) False

A body of mass 20 kg is suspended from a spring which deflects 20mm under this load. Calculate the frequency of free vibrations in Hz. a) 3.5 b) 5 c) 6 d) 7

Description : A body of mass 20 kg is suspended from a spring which deflects 20mm under this load. Calculate the frequency of free vibrations in Hz. a) 3.5 b) 5 c) 6 d) 7

Last Answer : a) 3.5

The moment of inertia of a hollow circular section whose external diameter is 8 cm and interial diameter is 6 cm about the axis passing through its centre is a.66.8 cm4 b.137.5 cm4 c.550 cm4 d.33.4 cm4 e.275 cm4

Description : The moment of inertia of a hollow circular section whose external diameter is 8 cm and interial diameter is 6 cm about the axis passing through its centre is a.66.8 cm4 b.137.5 cm4 c.550 cm4 d.33.4 cm4 e.275 cm4

Last Answer : b. 137.5 cm4