If harmonic motion of same frequency and same phase are superimposed in two perpendicular directions ( x and y) then, the resultant motion will be, A) circle B) An ellipse C) An square D) An rectangle

If harmonic motion of same frequency and same phase are superimposed in two perpendicular
directions ( x and y) then, the resultant motion will be,
A) circle
B) An ellipse
C) An square
D) An rectangle
by

1 Answer

Answer :

C) An square
by

Related questions

The resultant motion of two Simple Harmonic Motions will be A. Simple Harmonic MotionB. Periodic Motion C. Projectile Motion D. Zero

Description : The resultant motion of two Simple Harmonic Motions will be A. Simple Harmonic MotionB. Periodic Motion C. Projectile Motion D. Zero

Last Answer : A. Simple Harmonic Motion

If frequency of excitation of a forced vibration system with negligible damping is very close to natural frequency of the system, then the system will A) Execute harmonic motion of large amplitude B) Beat with a very high peak amplitude C) Perform aperiodic motion D) None of the above

Description : If frequency of excitation of a forced vibration system with negligible damping is very close to natural frequency of the system, then the system will A) Execute harmonic motion of large amplitude B) Beat with a very high peak amplitude C) Perform aperiodic motion D) None of the above

Last Answer : A) Execute harmonic motion of large amplitude

Harmonic motion is A) Necessarily a periodic motion B) An aperiodic motion C) A motion described in a circle D) A random motion

Description : Harmonic motion is A) Necessarily a periodic motion B) An aperiodic motion C) A motion described in a circle D) A random motion

Last Answer : A) Necessarily a periodic motion

If compressive yield stress and tensile yield stress are equivalent, then region of safety from maximum principal stress theory is of which shape? a) Rectangle b) Square c) Circle d) Ellipse

Description : If compressive yield stress and tensile yield stress are equivalent, then region of safety from maximum principal stress theory is of which shape? a) Rectangle b) Square c) Circle d) Ellipse

Last Answer : b) Square

The motion of a system executing harmonic motion with one natural frequency is known as _______ A. principal mode of vibration B. natural mode of vibration C. both a. and b. D. none of the above

Description : The motion of a system executing harmonic motion with one natural frequency is known as _______ A. principal mode of vibration B. natural mode of vibration C. both a. and b. D. none of the above

Last Answer : C. both a. and b.

When a body moves with simple harmonic motion, the product of its periodic time and frequency is equal to A. Zero B. One C. π/2 D. 2π

Description : When a body moves with simple harmonic motion, the product of its periodic time and frequency is equal to A. Zero B. One C. π/2 D. 2π

Last Answer : B. One

The motion of a system executing harmonic motion with one natural frequency is known as _______ A) principal mode of vibration B) natural mode of vibration C) both a. and b. D)none of the above

Description : The motion of a system executing harmonic motion with one natural frequency is known as _______ A) principal mode of vibration B) natural mode of vibration C) both a. and b. D)none of the above

Last Answer : C) both a. and b.

If the amplitude of harmonic motion is large, its frequency A) Will always be high B) Will always be less C) Can have any value D) Will be zero

Description : If the amplitude of harmonic motion is large, its frequency A) Will always be high B) Will always be less C) Can have any value D) Will be zero

Last Answer : C) Can have any value

The region of safety for biaxial stresses is of which shape in the case of maximum distortion energy theorem. a) Ellipse b) Circle c) Rectangle d) Square

Description : The region of safety for biaxial stresses is of which shape in the case of maximum distortion energy theorem. a) Ellipse b) Circle c) Rectangle d) Square

Last Answer : a) Ellipse

The region of safety for biaxial stresses is of which shape in the case of maximum distortion energy theorem. a) Ellipse b) Circle c) Rectangle d) Square

Description : The region of safety for biaxial stresses is of which shape in the case of maximum distortion energy theorem. a) Ellipse b) Circle c) Rectangle d) Square

Last Answer : a) Ellipse

Body having simple harmonic motion is represented by A) x = A sin ωt B) x = A cos ωt C) x = - A sin ωt D) x = - A cos ωt

Description : Body having simple harmonic motion is represented by A) x = A sin ωt B) x = A cos ωt C) x = - A sin ωt D) x = - A cos ωt

Last Answer : A) x = A sin ωt

The velocity vector in a vector diagram for a harmonic motion A Lags the displacement vector by 180 0 B Lags the displacement vector by 90 0 C Leads the displacement vector by 90 0 D Leads the displacement vector by 180 0

Description : The velocity vector in a vector diagram for a harmonic motion A Lags the displacement vector by 180 0 B Lags the displacement vector by 90 0 C Leads the displacement vector by 90 0 D Leads the displacement vector by 180 0

Last Answer : C Leads the displacement vector by 90 0

The velocity vector in a vector diagram for a harmonic motion A Lags the displacement vector by 180 0 B Lags the displacement vector by 90 0 C Leads the displacement vector by 90 0 D Leads the displacement vector by 180 0

Description : The velocity vector in a vector diagram for a harmonic motion A Lags the displacement vector by 180 0 B Lags the displacement vector by 90 0 C Leads the displacement vector by 90 0 D Leads the displacement vector by 180 0

Last Answer : C Leads the displacement vector by 90 0

The maximum acceleration of a particle moving with simple harmonic motion is ____. A. ω B. ω.r C. ω / 2 π D. 2 π / ω

Description : The maximum acceleration of a particle moving with simple harmonic motion is ____. A. ω B. ω.r C. ω / 2 π D. 2 π / ω

Last Answer : B. ω.r

The vector representing acceleration on a vector diagram for a harmonic motion A) Lags the displacement vector by 90° B) Lags the displacement vector by 180° C) Leads the displacement vector by 90° D) Leads the displacement vector by 180°

Description : The vector representing acceleration on a vector diagram for a harmonic motion A) Lags the displacement vector by 90° B) Lags the displacement vector by 180° C) Leads the displacement vector by 90° D) Leads the displacement vector by 180°

Last Answer : C) Leads the displacement vector by 90°

The velocity vector in a vector diagram for a harmonic motion A) Lags the displacement vector by 180° B) Leads the displacement vector by 90° C) Lags the displacement vector by 90° D) Leads the displacement vector by 180°

Description : The velocity vector in a vector diagram for a harmonic motion A) Lags the displacement vector by 180° B) Leads the displacement vector by 90° C) Lags the displacement vector by 90° D) Leads the displacement vector by 180°

Last Answer : B) Leads the displacement vector by 90°

The velocity vector in a vector diagram for a harmonic motion C (A) Lags the displacement vector by 180 0 (B) Lags the displacement vector by 90 0 (C) Leads the displacement vector by 90 0 (D) Leads the displacement vector by 180 0

Description : The velocity vector in a vector diagram for a harmonic motion C (A) Lags the displacement vector by 180 0 (B) Lags the displacement vector by 90 0 (C) Leads the displacement vector by 90 0 (D) Leads the displacement vector by 180 0

Last Answer : (C) Leads the displacement vector by 90 0

SHM stands for A. Single Harmonic Motion B. Simple Harmonic Motion C. Simple Harmonic Mechanism D. None of the above

Description : SHM stands for A. Single Harmonic Motion B. Simple Harmonic Motion C. Simple Harmonic Mechanism D. None of the above

Last Answer : B. Simple Harmonic Motion

The maximum acceleration of a particle moving with simple harmonic motion is ____. (A) ω (B) ω.r (C) ω / 2 π (D) 2 π / ω

Description : The maximum acceleration of a particle moving with simple harmonic motion is ____. (A) ω (B) ω.r (C) ω / 2 π (D) 2 π / ω

Last Answer : (B) ω.r

The locus of the end point of the resultant of the normal and tangential components of the stress on an inclined plane, is (A) Circle (B) Parabola (C) Ellipse (D) Straight line

Description : The locus of the end point of the resultant of the normal and tangential components of the stress  on an inclined plane, is  (A) Circle  (B) Parabola  (C) Ellipse  (D) Straight line 

Last Answer : (C) Ellipse 

When a two-degree-of-freedom system is subjected to a harmonic force, the system vibrates at the a. frequency of applied force b. smaller natural frequency c. larger natural frequency d. None of the above

Description : When a two-degree-of-freedom system is subjected to a harmonic force, the system vibrates at the a. frequency of applied force b. smaller natural frequency c. larger natural frequency d. None of the above

Last Answer : a. frequency of applied force

For an under damped harmonic oscillator, resonance A Occurs when excitation frequency is greater than undamped natural frequency B Occurs when excitation frequency is less than undamped natural frequency C Occurs when excitation frequency is equal to undamped natural frequency D Never occurs

Description : For an under damped harmonic oscillator, resonance A Occurs when excitation frequency is greater than undamped natural frequency B Occurs when excitation frequency is less than undamped natural frequency C Occurs when excitation frequency is equal to undamped natural frequency D Never occurs

Last Answer : C Occurs when excitation frequency is equal to undamped natural frequency

A weight of 50 N is suspended from a spring of stiffness 4000N/m and subjected to a harmonic force of magnitude 60N and frequency 60 Hz. what will be the static displacement of the spring due to maximum applied force A. 0.015m B. 0.15 m C. 15 m D. 150m

Description : A weight of 50 N is suspended from a spring of stiffness 4000N/m and subjected to a harmonic force of magnitude 60N and frequency 60 Hz. what will be the static displacement of the spring due to maximum applied force A. 0.015m B. 0.15 m C. 15 m D. 150m

Last Answer : B. 0.15 m

A single degree of freedom spring-mass system is subjected to a harmonic force of constant amplitude. For an excitation frequency of √3k/m , the ratio of the amplitude of steady state response to the static deflection of the spring is __________ A. 0.2 B. 0.5 C. 0.8 D. None of the above

Description : A single degree of freedom spring-mass system is subjected to a harmonic force of constant amplitude. For an excitation frequency of √3k/m , the ratio of the amplitude of steady state response to the static deflection of the spring is __________ A. 0.2 B. 0.5 C. 0.8 D. None of the above

Last Answer : B. 0.5

For an under damped harmonic oscillator, resonance a) occurs when excitation frequency is greater than undamped natural frequency b) occurs when excitation frequency is less than undamped natural frequency c) occurs when excitation frequency is equal to undamped natural frequency d) never occurs

Description : For an under damped harmonic oscillator, resonance a) occurs when excitation frequency is greater than undamped natural frequency b) occurs when excitation frequency is less than undamped natural frequency c) occurs when excitation frequency is equal to undamped natural frequency d) never occurs

Last Answer : c) occurs when excitation frequency is equal to undamped natural frequency

For an underdamped harmonic oscillator, resonance ______. (A) occurs when excitation frequency is greater than the undamped natural frequency (B) occurs when excitation frequency is less than the undamped natural frequency (C) occurs when excitation frequency is equal to the undamped natural frequency (D) never occurs

Description : For an underdamped harmonic oscillator, resonance ______. (A) occurs when excitation frequency is greater than the undamped natural frequency (B) occurs when excitation frequency is less than the ... ) occurs when excitation frequency is equal to the undamped natural frequency (D) never occurs

Last Answer : (C) occurs when excitation frequency is equal to the undamped natural frequency

For an under damped harmonic oscillator, resonance a) occurs when excitation frequency is greater than undamped natural frequency b) occurs when excitation frequency is less than undamped natural frequency c) occurs when excitation frequency is equal to undamped natural frequency d) never occurs

Description : For an under damped harmonic oscillator, resonance a) occurs when excitation frequency is greater than undamped natural frequency b) occurs when excitation frequency is less than undamped natural frequency c) occurs when excitation frequency is equal to undamped natural frequency d) never occurs

Last Answer : c) occurs when excitation frequency is equal to undamped natural frequency

In a DFD external entities are represented by a A) Rectangle B) Ellipse C) Diamond shaped box D) Circle

Description : In a DFD external entities are represented by a A) Rectangle B) Ellipse C) Diamond shaped box D) Circle

Last Answer : A) Rectangle

Longitudinal vibrations are said to occur when the particles of a body moves A Perpendicular to its axis B Parallel to its axis C In a circle about its axis D None of the mentioned

Description : Longitudinal vibrations are said to occur when the particles of a body moves A Perpendicular to its axis B Parallel to its axis C In a circle about its axis D None of the mentioned

Last Answer : B Parallel to its axis

Longitudinal vibrations are said to occur when the particles of a body moves (A) Perpendicular to its axis B (B) Parallel to its axis (C) In a circle about its axis (D) None of the mentioned

Description : Longitudinal vibrations are said to occur when the particles of a body moves (A) Perpendicular to its axis B (B) Parallel to its axis (C) In a circle about its axis (D) None of the mentioned

Last Answer : (B) Parallel to its axis

Longitudinal vibrations are said to occur when the particles of a body moves a) perpendicular to its axis b) parallel to its axis c) in a circle about its axis d) none of the mentioned

Description : Longitudinal vibrations are said to occur when the particles of a body moves a) perpendicular to its axis b) parallel to its axis c) in a circle about its axis d) none of the mentioned

Last Answer : b) parallel to its axis

Longitudinal vibrations are said to occur when the particles of a body moves a) perpendicular to its axis b) parallel to its axis c) in a circle about its axis d) none of the mentioned

Description : Longitudinal vibrations are said to occur when the particles of a body moves a) perpendicular to its axis b) parallel to its axis c) in a circle about its axis d) none of the mentioned

Last Answer : b) parallel to its axis

n which direction does the accelerating force acts? a) Opposite to the motion b) Along the motion c) Perpendicular to motion d) Variable

Description : n which direction does the accelerating force acts? a) Opposite to the motion b) Along the motion c) Perpendicular to motion d) Variable

Last Answer : b) Along the motion

In which direction does the damping force acts? a) Opposite to the motion b) Along the motion c) Perpendicular to motion d) Variable

Description : In which direction does the damping force acts? a) Opposite to the motion b) Along the motion c) Perpendicular to motion d) Variable

Last Answer : a) Opposite to the motion

If S, L and R are the arc length, long chord and radius of the sliding circle then the perpendicular distance of the line of the resultant cohesive force, is given by (A) a = S.R/L (B) a = L.S/R (C) a = L.R/S (D) None of these

Description : If S, L and R are the arc length, long chord and radius of the sliding circle then the perpendicular distance of the line of the resultant cohesive force, is given by (A) a = S.R/L (B) a = L.S/R (C) a = L.R/S (D) None of these

Last Answer : (A) a = S.R/L

The slope of one of the common tangent to circle `x^(2)+y^(2)=1` and ellipse `x^(2)/4+2y^(2)=1` is `sqrt(a/b)` where `gcd(a, b)=1` then `(a+b)/2` is e

Description : The slope of one of the common tangent to circle `x^(2)+y^(2)=1` and ellipse `x^(2)/4+2y^(2)=1` is `sqrt(a/b)` where `gcd(a, b)=1` then `(a+b)/2` is e

Last Answer : The slope of one of the common tangent to circle `x^(2)+y^(2)=1` and ellipse `x^(2)/4+2y^(2)=1` is ` ... `gcd(a, b)=1` then `(a+b)/2` is equal to

The period of oscillation of a particle undergoing simple harmonic motion is: w) independent of the amplitude of the motion x) directly proportional to the frequency of oscillation y) independent of the frequency of oscillation z) none of the above

Description : The period of oscillation of a particle undergoing simple harmonic motion is: w) independent of the amplitude of the motion x) directly proportional to the frequency of oscillation y) independent of the frequency of oscillation z) none of the above

Last Answer : ANSWER: W -- INDEPENDENT OF THE AMPLITUDE OF THE MOTION 

The motion of particle is represented by, x = Asin(wt) in which A stands for A. Amplitude B. Wavelength C. Frequency D. Damping

Description : The motion of particle is represented by, x = Asin(wt) in which A stands for A. Amplitude B. Wavelength C. Frequency D. Damping

Last Answer : A. Amplitude

A vibrating system having mass 1kg, a spring of stiffness 1000N/m and damping factor of 0.632 and it is put to harmonic excitation of 10N. Find the amplitude at resonance. A 0.079 B 7.9C 0.056 D 0.00791

Description : A vibrating system having mass 1kg, a spring of stiffness 1000N/m and damping factor of 0.632 and it is put to harmonic excitation of 10N. Find the amplitude at resonance. A 0.079 B 7.9C 0.056 D 0.00791

Last Answer : D 0.00791

The principal of mode vibration can be given by A) Two masses vibrate at Different frequency and in same phase B) Two masses vibrate at Different frequency and in Different phase C) Two masses vibrate at same frequency and in Different phase D) Two masses vibrate at same frequency and in same phase

Description : The principal of mode vibration can be given by A) Two masses vibrate at Different frequency and in same phase B) Two masses vibrate at Different frequency and in Different phase C) Two masses vibrate at same frequency and in Different phase D) Two masses vibrate at same frequency and in same phase

Last Answer : D) Two masses vibrate at same frequency and in same phase

When two masses vibrate at the same frequency and in phase, it is called a principal mode of vibration A. True B. False C. Does not depend on vibration D. None of the above

Description : When two masses vibrate at the same frequency and in phase, it is called a principal mode of vibration A. True B. False C. Does not depend on vibration D. None of the above

Last Answer : A. True

What is meant by critical damping coefficient? * 1 point (A) Frequency of damped free vibrations is less than zero (B). The motion is a periodic in nature (C). Both a. and b. (D). None of the above

Description : What is meant by critical damping coefficient? * 1 point (A) Frequency of damped free vibrations is less than zero (B). The motion is a periodic in nature (C). Both a. and b. (D). None of the above

Last Answer : (C). Both a. and b.

The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that A Its natural frequency is very low in comparison to the frequency of vibration B Its natural frequency is very high in comparison to the frequency of vibration C Its natural frequency is equal to the frequency of vibration D Measurement of vibratory motion is without any reference point

Description : The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that A Its natural frequency is very low in comparison to the frequency ... is equal to the frequency of vibration D Measurement of vibratory motion is without any reference point

Last Answer : C Its natural frequency is equal to the frequency of vibration

What is meant by critical damping coefficient? A Frequency of damped free vibrations is less than zero B The motion is aperiodic in nature C Both a. and b. D None of the above

Description : What is meant by critical damping coefficient? A Frequency of damped free vibrations is less than zero B The motion is aperiodic in nature C Both a. and b. D None of the above

Last Answer : B The motion is aperiodic in nature

The motion completed during one time period is known as _______. A period of vibration B cycle C frequency D all of the above

Description : The motion completed during one time period is known as _______. A period of vibration B cycle C frequency D all of the above

Last Answer : B cycle

The motion completed during one time period is known as _______. A. period of vibration B. cycle C. frequency D. all of the above

Description : The motion completed during one time period is known as _______. A. period of vibration B. cycle C. frequency D. all of the above

Last Answer : B. cycle

. The motion completed during one time period is known as _______. A. period of vibration B. cycle C. frequency D. all of the above

Description : . The motion completed during one time period is known as _______. A. period of vibration B. cycle C. frequency D. all of the above

Last Answer : B. cycle

Frequency of centrifugal pendulum absorber is always proportional to A) Oscillating motion B) Transfer motion C) Speed of rotating body D) All of the above

Description : Frequency of centrifugal pendulum absorber is always proportional to A) Oscillating motion B) Transfer motion C) Speed of rotating body D) All of the above

Last Answer : C) Speed of rotating body

What is meant by critical damping coefficient? B ( A )Frequency of damped free vibrations is less than zero ( B )The motion is aperiodic in nature ( C )Both a. and b. (D)None of the above

Description : What is meant by critical damping coefficient? B ( A )Frequency of damped free vibrations is less than zero ( B )The motion is aperiodic in nature ( C )Both a. and b. (D)None of the above

Last Answer : ( B )The motion is aperiodic in nature