What are the lighting systems adopted in KGS?

What are the lighting systems adopted in KGS?
by

1 Answer

Answer :

There are two systems. 

a. Normal lighting with class IV power supply. 

b. Emergency lighting with class II power supplies and in control room with class I power supplies. 
by

Related questions

What is the type turbine installed in KGS?

Description : What is the type turbine installed in KGS? 

Last Answer : Tandem compounded to expansion of steam, impulse reaction type.  

According to Coast Guard Regulation (46 CFR) for emergency power and lighting systems, which of the listed items is the only permissible starting aid for the emergency diesel generator engine? A. Ether B. Lube oil heater C. Jacket water heater D. Fuel oil heater

Description : According to Coast Guard Regulation (46 CFR) for emergency power and lighting systems, which of the listed items is the only permissible starting aid for the emergency diesel generator engine? A. Ether B. Lube oil heater C. Jacket water heater D. Fuel oil heater

Last Answer : Answer: C

How many kg's of luggage are you supposed to take on a plane?

Description : How many kg's of luggage are you supposed to take on a plane?

Last Answer : Ask your airline. Rules differ.

How to lose 7-8 kgs weight in 15 days?

Description : How to lose 7-8 kgs weight in 15 days?

Last Answer : Answers is the place to go to get the answers you need and to ask the questions you want

In SI units the power of sound is represented in A. Kgs B. Joules C. Newtons D. Watts

Description : In SI units the power of sound is represented in A. Kgs B. Joules C. Newtons D. Watts

Last Answer : ANS: D

A certain type of mixture is prepared by mixing brand A at Rs. 9/kg with brand B at Rs. 4/kg. If the mixture is worth Rs. 7/kg, how many kgs. of brand A are needed to make 40 kgs. of the mixture?

Description : A certain type of mixture is prepared by mixing brand A at Rs. 9/kg with brand B at Rs. 4/kg. If the mixture is worth Rs. 7/kg, how many kgs. of brand A are needed to make 40 kgs. of the mixture?

Last Answer : Answer: Brand A needed is 24 kgs.

n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In each batch about 120 kgs of material is dried. a. The quantity of moisture removed per batch. b. What is the total quantity ( sensible & latent) of heat required to evaporate the moisture, if the latent heat of water is 540 kcal/kg at atmospheric conditions, Ignore heat absorbed by the solids c. Find the quantity of steam required for the drying process (per batch), if steam at 4 kg/cm2 is used for generating hot air in the dryer and the dryer efficiency is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Description : n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture  is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In  each batch about 120 ... dryer and the dryer efficiency  is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Last Answer : Given that   Qty of material dried per batch - 120 Kgs  Moisture at inlet - 60% a. The quantity of moisture removed per batch.  Water quantity in a wet batch - 120 x 0.6 = 72 Kgs.  Quantity of bone dry ... - 48/0.95 = 50.5 Kgs.  Equivalent water in a dry batch - 50.5 - 48 = 2.5 Kgs.

The population of India is about 1.2 billion. Take the average consumption of energy per person per year in India as 30 Mega Joules. If this consumption is met by carbon based fuels and the rate of carbon emissions per kilojoule is l5 x I0 6 kgs, the total carbon emissions per year from India will be (A) 54 million metric tons (B) 540 million metric tons (C) 5400 million metric tons (D) 2400 million metric tons

Description : The population of India is about 1.2 billion. Take the average consumption of energy per person per year in India as 30 Mega Joules. If this consumption is met by carbon based fuels and the rate of ... tons (B) 540 million metric tons (C) 5400 million metric tons (D) 2400 million metric tons 

Last Answer : (B) 540 million metric tons

The average weight of a group of 22students is 34kg. When the weight of the staff is also included, the average weight increases by 2kg. What is the weight of the staff? A. 80 kgs B. 54 kgs C. 47 kgs D. 33kgs

Description : The average weight of a group of 22students is 34kg. When the weight of the staff is also included, the average weight increases by 2kg. What is the weight of the staff? A. 80 kgs B. 54 kgs C. 47 kgs D. 33kgs 

Last Answer : A) The average weight of a group of 22students = 34 kgs. Therefore, the total weight of the group = 22*34 = 748 kg When the weight of the staff is included, there are 23 individuals. The average ... , the total weight of the 22 students plus the staff = 23* 36= 828 828-748=80 kg.

When a girl weighing 90 kgs left a class, the average weight of the remaining 119 students increased by 400 g. What is the average weight of the remaining 119 students? A) 124 B) 138 C) 145 D) 116

Description : When a girl weighing 90 kgs left a class, the average weight of the remaining 119 students increased by 400 g. What is the average weight of the remaining 119 students? A) 124 B) 138 C) 145 D) 116

Last Answer :  B Let the average weight of the 119 students be X. Therefore, the total weight of the 119 of them will be 119X. The questions states that when the weight of this student who left is added, the total ... , the average weight decreases by 0.4 kgs. (119X+90)/120=X−0.4 ⇒119X+90=120X−48  ⇒X=138

A merchant mixes three varieties of rice costing Rs.40/kg, Rs.48/kg and Rs.60/kg and sells the mixture at a profit of 40% at Rs.60 / kg. How many kgs of the second variety will be in the mixture if 4 kgs of the third variety is there in the mixture? a) 1 kg b) 20 kgs c) 3 kgs d) 6 kgs e) 8kgs

Description : A merchant mixes three varieties of rice costing Rs.40/kg, Rs.48/kg and Rs.60/kg and sells the mixture at a profit of 40% at Rs.60 / kg. How many kgs of the second variety will be in the mixture if 4 kgs of the third variety is there in the mixture? a) 1 kg b) 20 kgs c) 3 kgs d) 6 kgs e) 8kgs

Last Answer : D If the selling price of mixture is Rs.60/kg and the merchant makes a profit of 20%, then the cost price of the mixture = 60/1.2 = Rs.50/kg. We need to find out the ratio in which the three varieties are mixed ... QC in step 1 and step 2 = 1 + 5 = 6 Therefore, the ratio = 1 : 25 : 5

When supplying emergency lighting loads, the storage battery initial voltage must not exceed the standard system voltage by more than _____________. A. 2% B. 3% C. 5% D. 10%

Description : When supplying emergency lighting loads, the storage battery initial voltage must not exceed the standard system voltage by more than _____________. A. 2% B. 3% C. 5% D. 10%

Last Answer : Answer: C

Which of the following statements is/are true regarding requirements for receptacle outlets aboard vessels? A. Each receptacle outlet operating at 100 volts or more must have a grounding pole. B. Outlets connecting a lifeboat and the vessel's electrical system must have threaded plugs. C. Machinery spaces must contain sufficient outlets for lighting all machinery with a portable light having a 50 foot flexible cord. D. All of the above.

Description : Which of the following statements is/are true regarding requirements for receptacle outlets aboard vessels? A. Each receptacle outlet operating at 100 volts or more must have a grounding pole. B. Outlets ... machinery with a portable light having a 50 foot flexible cord. D. All of the above.

Last Answer : Answer: A

Coast Guard Regulations (46 CFR) require that lighting fixture globes must be protected by guards if the fixtures are located in the ____________. A. steering gear room B. galley C. living quarters D. wheelhouse

Description : Coast Guard Regulations (46 CFR) require that lighting fixture globes must be protected by guards if the fixtures are located in the ____________. A. steering gear room B. galley C. living quarters D. wheelhouse

Last Answer : Answer: A

The source of emergency lighting and power at loss of normal ship's power on a cargo vessel should be obtained from the ______________. A. emergency generator supply to the emergency switchboard B. emergency generator supply to the main switchboard C. battery supply to the main switchboard D. turbogenerator supply to the emergency switchboard

Description : The source of emergency lighting and power at loss of normal ship's power on a cargo vessel should be obtained from the ______________. A. emergency generator supply to the emergency ... switchboard C. battery supply to the main switchboard D. turbogenerator supply to the emergency switchboard

Last Answer : Answer: A

The purpose of the automatic bus transfer shown in the illustration is to ___________. EL-0014 A. stepdown voltage to the lighting distribution panel B. provide emergency power to the lighting distribution panel C. energize the emergency switchboard from the main switchboard D. provide overcurrent protection to the lighting distribution panel

Description : The purpose of the automatic bus transfer shown in the illustration is to ___________. EL-0014 A. stepdown voltage to the lighting distribution panel B. provide emergency power to ... emergency switchboard from the main switchboard D. provide overcurrent protection to the lighting distribution panel

Last Answer : Answer: B

The electrical schematic shown in the illustration indicates the lighting feeder circuit is _____________. EL-0014 A. three phase, 450 volt, and 60 cycle B. three phase, 120 volt, and 60 cycle C. single phase, 120 volt, and 60 cycle D. not specified

Description : The electrical schematic shown in the illustration indicates the lighting feeder circuit is _____________. EL-0014 A. three phase, 450 volt, and 60 cycle B. three phase, 120 volt, and 60 cycle C. single phase, 120 volt, and 60 cycle D. not specified

Last Answer : Answer: A

In the lighting distribution circuit shown in the illustration, if all switches are closed and fuse 'F2' were to open, all lights on branches ____________. EL-0013 A. '1', '2', and '3' would go out B. '1' and '3' would would burn dimly, while branch '2' would burn normally C. '1', '2', and '3' would burn dimly D. '1' and '3' would go out, while branch '2' would remain lit

Description : In the lighting distribution circuit shown in the illustration, if all switches are closed and fuse 'F2' were to open, all lights on branches ____________. EL-0013 A. '1', '2', and '3' would go out B. '1' ... and '3' would burn dimly D. '1' and '3' would go out, while branch '2' would remain lit

Last Answer : Answer: D

If the voltage supplied to the lighting circuit is 110 volts, how much current is used by a 100 watt light bulb? A. 0.08 amps B. 0.91 amps C. 1.10 amps D. 90.9 amps

Description : If the voltage supplied to the lighting circuit is 110 volts, how much current is used by a 100 watt light bulb? A. 0.08 amps B. 0.91 amps C. 1.10 amps D. 90.9 amps

Last Answer : Answer: B

In the illustration if BRANCH NO. 1 is a lighting circuit for crew's berthing, Federal Regulations (46 CFR) require the maximum fuse rating for that branch to be _________. EL-0013 A. 80% of the connected load B. 15 amps C. 20 amps D. 30 amps

Description : In the illustration if BRANCH NO. 1 is a lighting circuit for crew's berthing, Federal Regulations (46 CFR) require the maximum fuse rating for that branch to be _________. EL-0013 A. 80% of the connected load B. 15 amps C. 20 amps D. 30 amps

Last Answer : Answer: C

In the illustration if BRANCH NO. 1 is a lighting circuit for crew's berthing, 46 CFR requires the maximum fuse rating for that branch to be _________. EL-0013 A. 15 amps B. 80% of the connected load C. 20 amps D. 30 amps

Description : In the illustration if BRANCH NO. 1 is a lighting circuit for crew's berthing, 46 CFR requires the maximum fuse rating for that branch to be _________. EL-0013 A. 15 amps B. 80% of the connected load C. 20 amps D. 30 amps

Last Answer : Answer: C

If the illustrated lighting branch distribution box is not for cargo or deck lighting, the Coast Guard Regulations (46 CFR) requires the designed load attached to Branch NO.2 to be no more than _________. EL-0013 A. 5 amps B. 16 amps C. 30 amps D. 50 amps

Description : If the illustrated lighting branch distribution box is not for cargo or deck lighting, the Coast Guard Regulations (46 CFR) requires the designed load attached to Branch NO.2 to be no more than _________. EL-0013 A. 5 amps B. 16 amps C. 30 amps D. 50 amps

Last Answer : Answer: B

Due to the operating characteristics of the system, time lag fuses (or dual-element fuses) are necessary for use in _____________. A. main lighting circuits B. motor starting circuit C. emergency lighting circuits D. general alarm circuits

Description : Due to the operating characteristics of the system, time lag fuses (or dual-element fuses) are necessary for use in _____________. A. main lighting circuits B. motor starting circuit C. emergency lighting circuits D. general alarm circuits

Last Answer : Answer: B

Transformers are used onboard ships with AC generators to _____________. A. change frequency B. increase power output to modulating frequency controllers C. decrease power output to modulating frequency controllers D. permit higher voltage for electric motor operation and low voltage for lighting circuits

Description : Transformers are used onboard ships with AC generators to _____________. A. change frequency B. increase power output to modulating frequency controllers C. decrease power output to modulating frequency ... D. permit higher voltage for electric motor operation and low voltage for lighting circuits

Last Answer : Answer: D

Handheld phase sequence indicators are useful when ________. A. preparing to parallel alternators B. connecting lighting branch circuits C. troubleshooting DC motors D. connecting shore power lines to the ship

Description : Handheld phase sequence indicators are useful when ________. A. preparing to parallel alternators B. connecting lighting branch circuits C. troubleshooting DC motors D. connecting shore power lines to the ship

Last Answer : Answer: D

Which of the following components are used to assemble a fluorescent lighting system? A. Lamp B. Starter C. Ballast D. All of the above

Description : Which of the following components are used to assemble a fluorescent lighting system? A. Lamp B. Starter C. Ballast D. All of the above

Last Answer : Answer: D

Time delayed or delayed action-type fuses are designed to _____________. A. prevent grounds in branch circuits B. prevent opens in motor circuits C. permit momentary overloads without melting D. guard lighting and electronic circuits

Description : Time delayed or delayed action-type fuses are designed to _____________. A. prevent grounds in branch circuits B. prevent opens in motor circuits C. permit momentary overloads without melting D. guard lighting and electronic circuits

Last Answer : Answer: C

A delayed-action fuse is most frequently used in which of the listed circuits? A. Lighting circuit B. Motor circuit C. Electric heater circuit D. Radar circuit

Description : A delayed-action fuse is most frequently used in which of the listed circuits? A. Lighting circuit B. Motor circuit C. Electric heater circuit D. Radar circuit

Last Answer : Answer: B

Which of the listed types of lighting circuits does the diagram shown in the illustration represent? EL-0081 A. High pressure sodium B. Low voltage quartz C. Mercury vapor D. Standard fluorescent

Description : Which of the listed types of lighting circuits does the diagram shown in the illustration represent? EL-0081 A. High pressure sodium B. Low voltage quartz C. Mercury vapor D. Standard fluorescent

Last Answer : Answer: D

The diagram shown in the illustration represents a _________. EL-0058 A. dual speed, 2-winding motor controller B. navigation running light circuit C. single phase, 2-motor selectable starter D. common fluorescent lighting circuit

Description : The diagram shown in the illustration represents a _________. EL-0058 A. dual speed, 2-winding motor controller B. navigation running light circuit C. single phase, 2-motor selectable starter D. common fluorescent lighting circuit

Last Answer : Answer: B

Where should the lighting arrestor is placed in distribution lines?

Description : Where should the lighting arrestor is placed in distribution lines?

Last Answer : Near distribution transformers and out going feeders of 11kv and incoming feeder of 33kv and near power transformers in sub-stations.

Why Delta Star Transformers are used for Lighting Loads?

Description : Why Delta Star Transformers are used for Lighting Loads?

Last Answer : A. For lighting loads, neutral conductor is must and hence the secondary must be star winding.This lighting load is always unbalanced in all three phases. To minimize the current unbalance in the primary we use delta winding in the primary. So delta / star transformer is used for lighting loads.

Why Delta Star transformer Are Used For Lighting Loads?

Description : Why Delta Star transformer Are Used For Lighting Loads?

Last Answer : For lighting loads, neutral conductor is must and hence the secondary must be star winding. and this lighting load is always unbalanced in all three phases. To minimize the current unbalance in the primary we use delta winding in the primary. So delta / star trformer is used for lighting loads.

Where should the lighting arrestor be placed in distribution lines?

Description : Where should the lighting arrestor be placed in distribution lines?

Last Answer : A:Near distribution transformers and out going feeders of 11kv and incomming feeder of 33kv and near power transformers in sub-stations.

Where are the lighting arrestors placed in distribution lines?

Description : Where are the lighting arrestors placed in distribution lines?

Last Answer : Near distribution transformers and outgoing feeders of 11kv and incoming feeder of 33kv and near power transformers in sub-stations.

What types of lighting fittings are used in the battery room?

Description : What types of lighting fittings are used in the battery room?

Last Answer : Flame proof acid resistant  

Why lighting isolation transformer is req.?

Description : Why lighting isolation transformer is req.? 

Last Answer : a) 3 wire to 4 wire conversion, since neutral is required for lighting load. b) Prevents transfer of E/F currents c) Reduces the fault level on secondary side and permits use of small sized cables / CB’s / fuses.

What are the types of lighting?

Description : What are the types of lighting?

Last Answer : a. Direct lighting: light directly comes from the source to the surface. b. Indirect lighting: light reflects from the wall, reflector or ceilings etc. c. Semi direct lighting: light comes through the shade.

Why Delta Star Transformers are used for Lighting Loads?

Description : Why Delta Star Transformers are used for Lighting Loads?

Last Answer : For lighting loads, neutral conductor is must and hence the secondary must be star winding and this lighting load is always unbalanced in all three phases.  To minimize the current unbalance in the primary we use delta winding in the primary So delta / star transformer is used for lighting loads.

Why is different water harvesting systems adopted in ancient India? -Geography

Description : Why is different water harvesting systems adopted in ancient India? -Geography

Last Answer : Rainwater harvesting itself means storage of the rainwater for future use. This storage of water can be used for a variety of purposes. Even the process of recharging of the groundwater is done ... . This installing of the rooftop was for the rainwater harvesting system to meet their water needs.

When gravity and pumping systems of water distribution are adopted, the type of distribution reservoir, is (A) Elevated tank (B) Ground source reservoir (C) Intz tank (D) Stand pipe

Description : When gravity and pumping systems of water distribution are adopted, the type of distribution  reservoir, is  (A) Elevated tank  (B) Ground source reservoir  (C) Intz tank  (D) Stand pipe

Last Answer : (A) Elevated tank 

Which of the following describes an ERP system? A. ERP systems provide a foundation for collaboration between departments B. ERP systems enable people in different business areas to communicate C. ERP systems have been widely adopted in large organisations to store critical knowledge used to make the decisions that drive the organisation's performance D. All of the above

Description : Which of the following describes an ERP system? A. ERP systems provide a foundation for collaboration between departments B. ERP systems enable people in different business areas to communicate C. ERP ... used to make the decisions that drive the organisation's performance D. All of the above

Last Answer : D. All of the above

What are the methods adopted to reduce harmonic torques?

Description : What are the methods adopted to reduce harmonic torques?

Last Answer : The methods used for reduction or elimination of harmonic torques are chording, integral slot winding, skewing and increasing the length of air gap.

Why wound rotor construction is adopted?

Description : Why wound rotor construction is adopted?

Last Answer : The wound rotor has the facility of increasing the rotor resistance through slip rings. High value of rotor resistance is needed during starting to get a high value of starting torque.

Why synchronizing scheme has been adopted? What are interlocks provided?

Description : Why synchronizing scheme has been adopted? What are interlocks provided?  

Last Answer : To check running and incoming buses, which are going to be interconnected are in synchronism with each other. Interlocks 1. Synch selector. 2. Only one breaker can operate at a time. 3. ... will bypass this synch contact). Bypass facility is provided to close the breaker on dead bus only. 

Why ungrounded 250V DC system adopted in our system?

Description : Why ungrounded 250V DC system adopted in our system?

Last Answer : The 250V DC system is feeding to some of the vital loads such as breaker control etc. Even if one ground has occurred then also these controls should be available. Continuous monitoring of ground current is employed to eliminate the by passing of logic due to double ground.