What are the effects of GT over fluxing?

What are the effects of GT over fluxing? 
by

1 Answer

Answer :

a. Eddy current circulation.

b. Magnetising current increases

c. Winding temp increases

d. Transformer noise/vibration increases.

e. Over heating of non laminated metal parts (affected by stray fluxes) 


by

Related questions

What is over fluxing protection in transformer?

Description : What is over fluxing protection in transformer?

Last Answer : If the turns ratio of the transformer is more than 1:1, there will be higher core loss and the capability of the transformer to withstand this is limited to a few minutes only. This phenomenon is called over fluxing.

What is meant by over fluxing of transformer?

Description : What is meant by over fluxing of transformer? 

Last Answer : When the voltage is increased and the frequency is reduced the transformer will draw high magnetising current. This will result in higher core loss and subsequent heating of core and ultimate failure of transformer. Hence over fluxing protection is provided for the transformer. 

The emergency electrical power source on tank vessels over 500 GT on an international voyage, should be capable of continuous operation under emergency load for _____________. A. 6 hours B. 12 hours C. 18 hours D. 24 hours

Description : The emergency electrical power source on tank vessels over 500 GT on an international voyage, should be capable of continuous operation under emergency load for _____________. A. 6 hours B. 12 hours C. 18 hours D. 24 hours

Last Answer : Answer: C

What is the advantage of Pressure relief device in TELK type GT over explosion vent of BHEL, even though in both cases oil will be expelled out during sudden pressure rise?

Description : What is the advantage of Pressure relief device in TELK type GT over explosion vent of BHEL, even though in both cases oil will be expelled out during sudden pressure rise?

Last Answer : During internal fault, the internal pressure rise is relieved by the expelling out of oil through Pressure relief device /explosion vent. However the Pressure relief device closes back when the pressure ... hazard due to transformer oil does not exist after the closure of Pressure relief device. 

Why our GT having off load tap changer?

Description : Why our GT having off load tap changer?

Last Answer : Because our station is base load station.  

What is the vector group of GT, UT, SUT?

Description : What is the vector group of GT, UT, SUT?

Last Answer : Yd11 Dy1 Yy0 

What is the type of lightning arrestor for GT?

Description : What is the type of lightning arrestor for GT? 

Last Answer : Zn O (zinc oxide) types.  

Why off load tap changer was chosen for GT?

Description : Why off load tap changer was chosen for GT?

Last Answer : Because our plant works on base load always.  

How selection of cooling fluid in GT done?

Description : How selection of cooling fluid in GT done? 

Last Answer : a) There are 5 factors are there. b) Density c) Coefficient of thermal expansion d) Viscosity e) Specific heat f) Thermal conductivity. 

Why REF is now is used for HV side also in GT/SUT?

Description : Why REF is now is used for HV side also in GT/SUT?

Last Answer : The E/F setting of differential is poor.  

Is it a wise choice to upgrade my GeForce GT 440 to GTS 450?

Description : Is it a wise choice to upgrade my GeForce GT 440 to GTS 450?

Last Answer : answer:GTX or GTFO. Seriously, given the price of the lower GTX-series compared to the performance, the GTS series isn’t worthwhile. Or, if you don’t mind AMD, the R7 is a good value. The R7 260X runs around $100–120 and is twice as powerful as the GTS450.

How do I stop Dual clock on a Samsung Galaxy Ace GT-S5830i?

Description : How do I stop Dual clock on a Samsung Galaxy Ace GT-S5830i?

Last Answer : answer:You mean that it won’t allow you to remove the widget in the normal manner? When in doubt, uninstall.

GT Legends Game Mod; Help please?

Description : GT Legends Game Mod; Help please?

Last Answer : Here is a cheat that will unlock everything, which I guess will render money useless. Unlock all tracks and cars. Create an empty file named “TG2001.DYN” in your GTL installation direction. Any new profiles created in-game thereafter will have all tracks and cars unlocked from the start.

In GT games to come do you think Porsche should be a real name , rather that of the powering brand RUF?

Description : In GT games to come do you think Porsche should be a real name , rather that of the powering brand RUF?

Last Answer : There are always licensing troubles with Porche, but yes, it would be nice. According to all of the trailers and interviews, there will be real damage modeling.

How much do u think it will cost to tint the windows on a 2000 ford mustang gt?

Description : How much do u think it will cost to tint the windows on a 2000 ford mustang gt?

Last Answer : your credability?

How much is it for a real flow master fot a mustang 2000 gt? What about a hood scooop?

Description : How much is it for a real flow master fot a mustang 2000 gt? What about a hood scooop?

Last Answer : FLow master exhaust has nothing to do with a hood scoop. They vary in price depending on what kind you want to get. Straight pipes with baffles? Curved pipes? 2 , 3 ???? Stainless, ceramic? I paid around ... K&N intake set ups. Are you looking to just beef up your ride or are you going to race it?

Pontiac G6 GT brake lights always on?

Description : Pontiac G6 GT brake lights always on?

Last Answer : answer:Maybe something is loose, such as the wiring? In all seriousness though, your best bet is to get rid of the G6.

In ship manufacturing, the type of layout preferred is a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Description : In ship manufacturing, the type of layout preferred is a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : c.Fixed-position layout

The following type of layout is preferred for low volume production of non-standard products a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Description : The following type of layout is preferred for low volume production of non-standard products a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : b.Process layout

The following type of layout is preferred to manufacture a standard product in large quantity a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Description : The following type of layout is preferred to manufacture a standard product in large quantity a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : a.Product layout

If all the processing equipment and machines are arranged according to the sequence ofoperations of a product the layout is known as a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Description : If all the processing equipment and machines are arranged according to the sequence ofoperations of a product the layout is known as a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : a.Product layout

From the following in which type of GT code tree-type structure is used? a.Poly code b.Hybrid code c.Mono code d.None of the above

Description : From the following in which type of GT code tree-type structure is used? a.Poly code b.Hybrid code c.Mono code d.None of the above

Last Answer : c.Mono code

From the following in which type of GT code chain-type structure is used? a.Poly code b.Hybrid code c.Mono code d.None of the above

Description : From the following in which type of GT code chain-type structure is used? a.Poly code b.Hybrid code c.Mono code d.None of the above

Last Answer : a.Poly code

____ is a highly automated group of GT machine cell. a.Flexible manufacturing system b.Group technology c.Automated system d.None of the above

Description : ____ is a highly automated group of GT machine cell. a.Flexible manufacturing system b.Group technology c.Automated system d.None of the above

Last Answer : a.Flexible manufacturing system

____ is a collection of parts which have similar characteristics a.Part family b.Mono family c.GT family d.Poly family

Description : ____ is a collection of parts which have similar characteristics a.Part family b.Mono family c.GT family d.Poly family

Last Answer : a.Part family

In which layout manufacturing is done according to product's characteristics? a.Process layout b.GT layout c.Product layout d.Both A & B

Description : In which layout manufacturing is done according to product's characteristics? a.Process layout b.GT layout c.Product layout d.Both A & B

Last Answer : d.Both A & B

In which layout manufacturing is done according to machine arrangement a.GT layout b.Product layout c.Process layout d.Hybrid layout

Description : In which layout manufacturing is done according to machine arrangement a.GT layout b.Product layout c.Process layout d.Hybrid layout

Last Answer : c.Process layout

How much is the difference between a GTX 560 and a GT 1030?

Description : ?

Last Answer : More in price than speed. I think it’s even easier to use the older 560 in this category. Due to the different developments of the larger ones, it is worth choosing the new one if you have the money. I am thinking here of graphic improvements.

samsung galaxy s3 gt i9300 immediately after switching on, it locks on the locking surface and nothing goes wrong with it .. not even the three-button works, it also cuts

Description : I really don't know what to do with what the repair or the price would be ... I don't understand the phones at all Thank you in advance

Last Answer : How long have you had your mobile? I have experience with Samsung that after about a year and a half it will get stuck. If this happens, it helps me remove the back cover with the battery for a while ... again. If the locking area remained on the display, I would take it for service, I have no idea.

Samsung GT-S5610 cannot be turned on after resetting

Description : Hi, I have a Samsung GT-S5610 business phone and I need to return it to the company, so I reset it and after the phone showed me that it needs to be restarted, it can't be turned on. When I turn it ... , flashes, etc. all the time. I can't handle it at all. Can anyone please advise me? Thank you.

Last Answer : It's best to go to the service and get advice

how to change head gaskets on a 2003 mustang gt

Description : how to change head gaskets on a 2003 mustang gt

Last Answer : Click here for instructions > http://www.ehow.com/how_7628648_replace-head-gasket-mustang-v6.html

The Characters Trunks and Pan On Dragon Ball Z/ Gt, Is It True They Become A Couple.

Description : The Characters Trunks and Pan On Dragon Ball Z/ Gt, Is It True They Become A Couple.

Last Answer : They are fake characters. Why is this so important to you? Are you lacking love in your life? They are not for real in the real world either. They are created characters. Get outside and play, get off the computer. Your brain is starving for oxygen.

The area bounded by the lines `y = 2, x =1, x = a` and the curve `y = f(x),` which cuts the last two lines above first line for all `a gt= 1,` is equa

Description : The area bounded by the lines `y = 2, x =1, x = a` and the curve `y = f(x),` which cuts the last two lines above first line for all `a gt= 1,` is equa

Last Answer : The area bounded by the lines `y = 2, x =1, x = a` and the curve `y = f(x),` which cuts the last two ... , x ge 1` C. ` 2 sqrtx , x ge 1` D. None

Statement -I: If `alpha gt beta gt 1`, then `(alpha^(sqrt(log_(alpha)beta)))/(beta^(sqrt(log_(beta)alpha)))` is greater than 1. Statement-2 : `log_(c)

Description : Statement -I: If `alpha gt beta gt 1`, then `(alpha^(sqrt(log_(alpha)beta)))/(beta^(sqrt(log_(beta)alpha)))` is greater than 1. Statement-2 : `log_(c)

Last Answer : Statement -I: If `alpha gt beta gt 1`, then `(alpha^(sqrt(log_(alpha)beta)))/(beta^(sqrt(log_( ... . D. Statement -1 is false, statement -2 is ture.

Find the maximum value of the function `(log x)/x " when "x gt 0`.

Description : Find the maximum value of the function `(log x)/x " when "x gt 0`.

Last Answer : Find the maximum value of the function `(log x)/x " when "x gt 0`.

If `a gt 0` and `n` is any positive integer, then the sign of `root(n)(a)` is _______.

Description : If `a gt 0` and `n` is any positive integer, then the sign of `root(n)(a)` is _______.

Last Answer : If `a gt 0` and `n` is any positive integer, then the sign of `root(n)(a)` is _______.

The positive integer value of `n gt 3` satisfying the equation `(1)/(sin((pi)/(n)))=(1)/(sin((2pi)/(n)))+(1)/(sin((3pi)/(n)))` is

Description : The positive integer value of `n gt 3` satisfying the equation `(1)/(sin((pi)/(n)))=(1)/(sin((2pi)/(n)))+(1)/(sin((3pi)/(n)))` is

Last Answer : The positive integer value of `n gt 3` satisfying the equation `(1)/(sin((pi)/(n)))=(1)/(sin((2pi)/(n)))+(1)/(sin((3pi)/(n)))` is

Number of solution of `sinx cosx-3cosx+4sinx-13 gt 0` in `[0,2pi]` is equal to

Description : Number of solution of `sinx cosx-3cosx+4sinx-13 gt 0` in `[0,2pi]` is equal to

Last Answer : Number of solution of `sinx cosx-3cosx+4sinx-13 gt 0` in `[0,2pi]` is equal to A. `0` B. `1` C. `2` D. `4`

Number of positive integral solution of the equation `|x^(2)-3x-3| gt |x^(2)+7x-13|` is/are

Description : Number of positive integral solution of the equation `|x^(2)-3x-3| gt |x^(2)+7x-13|` is/are

Last Answer : Number of positive integral solution of the equation `|x^(2)-3x-3| gt |x^(2)+7x-13|` is/are A. `0` B. `1` C. `2 D. `3`

Solve the following inequalities `(i) |log_(3)x|-log_(3)x-3 lt 0` `(ii)(x-1)/(log_(3)(9-3^(x))-3) le 1` `(iii)log_((x-1)/(x-5))(x-2) gt 0` `(iv) log_(

Description : Solve the following inequalities `(i) |log_(3)x|-log_(3)x-3 lt 0` `(ii)(x-1)/(log_(3)(9-3^(x))-3) le 1` `(iii)log_((x-1)/(x-5))(x-2) gt 0` `(iv) log_(

Last Answer : Solve the following inequalities `(i) |log_(3)x|-log_(3)x-3 lt 0` `(ii)(x-1)/(log_(3)(9-3^(x))-3) le 1` ... gt 0` `(iv) log_(x)(x^(3)-x^(2)-2x) lt 3`

Solve the following inequlities `(i) sqrt(x-1) lt x-3` `(ii) sqrt(x-3) gt sqrt(7-x)` `(iii) sqrt (x^(2)+4x+9) gt x +2` `(iv) 4-x lt sqrt(2x-x^(2))` `(

Description : Solve the following inequlities `(i) sqrt(x-1) lt x-3` `(ii) sqrt(x-3) gt sqrt(7-x)` `(iii) sqrt (x^(2)+4x+9) gt x +2` `(iv) 4-x lt sqrt(2x-x^(2))` `(

Last Answer : Solve the following inequlities `(i) sqrt(x-1) lt x-3` `(ii) sqrt(x-3) gt sqrt(7-x)` `(iii) sqrt (x^(2)+4x+ ... (ix) (|x+2|-|x|)/(sqrt(8-x^(3))) ge 0`

Solve the following in equalities `(i) |x+7| gt 5` `(ii) |x+3| lt 10` `(iii) (x+2) lt |x^(2)+3x+5|``(iv) |(2x-1)/(x-1)| gt 2` `(v) |x-6| le x^(2)-5x+9

Description : Solve the following in equalities `(i) |x+7| gt 5` `(ii) |x+3| lt 10` `(iii) (x+2) lt |x^(2)+3x+5|``(iv) |(2x-1)/(x-1)| gt 2` `(v) |x-6| le x^(2)-5x+9

Last Answer : Solve the following in equalities `(i) |x+7| gt 5` `(ii) |x+3| lt 10` `(iii) (x+2) lt |x^(2)+3x+5|``(iv) ... -5) lt 0` `(viii) |x-1|+|x-2|+|x-3| le 6`

Assertion :- Bond Dissociation energy is `F_(2) gt Cl_(2)` Reason:- `Cl_(2)` have more electronic repulsion than `F_(2)`.

Description : Assertion :- Bond Dissociation energy is `F_(2) gt Cl_(2)` Reason:- `Cl_(2)` have more electronic repulsion than `F_(2)`.

Last Answer : Assertion :- Bond Dissociation energy is `F_(2) gt Cl_(2)` Reason:- `Cl_(2)` have more ... is False. D. If both Assertion & Reason are false

If `Delta G^(@)gt 0` for a reaction then :

Description : If `Delta G^(@)gt 0` for a reaction then :

Last Answer : If `Delta G^(@)gt 0` for a reaction then : A. `K_(P) gt 1` B. `K_(P) lt 1` C. The products predominate in the equilibrium mixture D. None

If `Delta H gt 0` and `Delta S gt 0`, the reaction proceeds spontaneously when :-

Description : If `Delta H gt 0` and `Delta S gt 0`, the reaction proceeds spontaneously when :-

Last Answer : If `Delta H gt 0` and `Delta S gt 0`, the reaction proceeds spontaneously when :- A. `Delta H gt 0` B. ... Delta S` C. `Delta H = T Delta S` D. None

Two compounds I and II are eluted by column chromatography (adsorption of `I gt II`). Which one of the following is a correct statement ?

Description : Two compounds I and II are eluted by column chromatography (adsorption of `I gt II`). Which one of the following is a correct statement ?

Last Answer : Two compounds I and II are eluted by column chromatography (adsorption of `I gt II`). Which one of the ... slower and has higher `R_(f)` value than I

Which among the following is the most reactive gt

Description : Which among the following is the most reactive gt

Last Answer : Which among the following is the most reactive gt A. `Cl_2` B. `Br_2` C. `I_2` D. I Cl

If `(x^(y))^z =2^(8)`then find the maximum possible value of (x)(y)(z) where x,y,z`gt`0

Description : If `(x^(y))^z =2^(8)`then find the maximum possible value of (x)(y)(z) where x,y,z`gt`0

Last Answer : If `(x^(y))^z =2^(8)`then find the maximum possible value of (x)(y)(z) where x,y,z`gt`0 A. 16 B. 12 C. 256 D. 24

Solve : `2x - 5 gt 4x - 3`

Description : Solve : `2x - 5 gt 4x - 3`

Last Answer : Solve : `2x - 5 gt 4x - 3`

Solve : `2m + 5 gt 9 - 4m, m in Q`

Description : Solve : `2m + 5 gt 9 - 4m, m in Q`

Last Answer : Solve : `2m + 5 gt 9 - 4m, m in Q`