Why our GT having off load tap changer?

Why our GT having off load tap changer?
by

1 Answer

Answer :

Because our station is base load station.  
by

Related questions

Why off load tap changer was chosen for GT?

Description : Why off load tap changer was chosen for GT?

Last Answer : Because our plant works on base load always.  

Why there is no mixing of oil of tap changer and transformer?

Description : Why there is no mixing of oil of tap changer and transformer?

Last Answer : When the tap changing takes place arc is struck between the contacts. Due to this the oil inside the tap changer will be highly carbonised. If both oil get mixed up the quality of transformer tank oil will come down. This is not advisable. Hence both oils are kept separately. 

Why tap changer is kept at neutral end?

Description : Why tap changer is kept at neutral end? 

Last Answer : a) To reduce insulation cost of tap changer. b) But reactance changeover the tap range increases. 

The emergency electrical power source on tank vessels over 500 GT on an international voyage, should be capable of continuous operation under emergency load for _____________. A. 6 hours B. 12 hours C. 18 hours D. 24 hours

Description : The emergency electrical power source on tank vessels over 500 GT on an international voyage, should be capable of continuous operation under emergency load for _____________. A. 6 hours B. 12 hours C. 18 hours D. 24 hours

Last Answer : Answer: C

How to Load CDs Into a Car CD Changer?

Description : How to Load CDs Into a Car CD Changer?

Last Answer : If you have a multi-CD changer in your car, are you taking fulladvantage of it? Loading CDs into a car CD changer can seemcomplicated, but it doesn't have to be. If you follow these ... to be located somewhere else in thevehicle. Once you've identified where the CD changer is located,dete

An autotransformer is equipped with a 50% tap, a 65% tap, and an 80% tap. Which of the following statements is true concerning a load connected to the 50% tap? A. The load is receiving minimum voltage and minimum current. B. The load is receiving minimum voltage and maximum current. C. The load is receiving maximum voltage and minimum current. D. The load is receiving maximum voltage and maximum current.

Description : An autotransformer is equipped with a 50% tap, a 65% tap, and an 80% tap. Which of the following statements is true concerning a load connected to the 50% tap? A. The load is ... is receiving maximum voltage and minimum current. D. The load is receiving maximum voltage and maximum current.

Last Answer : Answer: B

What is the vector group of GT, UT, SUT?

Description : What is the vector group of GT, UT, SUT?

Last Answer : Yd11 Dy1 Yy0 

What is the advantage of Pressure relief device in TELK type GT over explosion vent of BHEL, even though in both cases oil will be expelled out during sudden pressure rise?

Description : What is the advantage of Pressure relief device in TELK type GT over explosion vent of BHEL, even though in both cases oil will be expelled out during sudden pressure rise?

Last Answer : During internal fault, the internal pressure rise is relieved by the expelling out of oil through Pressure relief device /explosion vent. However the Pressure relief device closes back when the pressure ... hazard due to transformer oil does not exist after the closure of Pressure relief device. 

What is the type of lightning arrestor for GT?

Description : What is the type of lightning arrestor for GT? 

Last Answer : Zn O (zinc oxide) types.  

How selection of cooling fluid in GT done?

Description : How selection of cooling fluid in GT done? 

Last Answer : a) There are 5 factors are there. b) Density c) Coefficient of thermal expansion d) Viscosity e) Specific heat f) Thermal conductivity. 

What are the effects of GT over fluxing?

Description : What are the effects of GT over fluxing? 

Last Answer : a. Eddy current circulation. b. Magnetising current increases c. Winding temp increases d. Transformer noise/vibration increases. e. Over heating of non laminated metal parts (affected by stray fluxes) 

Why REF is now is used for HV side also in GT/SUT?

Description : Why REF is now is used for HV side also in GT/SUT?

Last Answer : The E/F setting of differential is poor.  

Can I make a bluetooth printer using a USB gender changer and geting a cheap dongle?

Description : Can I make a bluetooth printer using a USB gender changer and geting a cheap dongle?

Last Answer : Seems like it would work in theory but then again communism works in theory… The main problem you would have is your PC not seeing the printer on the signal.

Are you an icon changer ?

Description : Are you an icon changer ?

Last Answer : Not so far as to change the dock but i do change my icons… The change from Tiger to Leopard left them looking slightly plain

I need a good voice changer?

Description : I need a good voice changer?

Last Answer : answer:Up to no good huh… Yes you must give us details.

In the CNC machine which device used to hold the workpiece? a.Automatic pallet changer b.Automatic work part positioner c.A & B both d.None of the above

Description : In the CNC machine which device used to hold the workpiece? a.Automatic pallet changer b.Automatic work part positioner c.A & B both d.None of the above

Last Answer : c.A & B both

What is the full form of ATC? a.Automatic tool changer b.Arranged tool changer c.Automatic tool controller d.Arranged tool controller

Description : What is the full form of ATC? a.Automatic tool changer b.Arranged tool changer c.Automatic tool controller d.Arranged tool controller

Last Answer : a.Automatic tool changer

The author of the book Game Changer ? -General Knowledge

Description : The author of the book Game Changer ? -General Knowledge

Last Answer : Shahid Afridi

how do i fix auto cd changer?

Description : how do i fix auto cd changer?

Last Answer : Need Answer

Can I use a factory stereo with a aftermarket cd changer?

Description : Can I use a factory stereo with a aftermarket cd changer?

Last Answer : Yes, there are universal cd changers sold

Will the Pioneer CDX-FM687 6-Disc CD Changer work with any head unit?

Description : Will the Pioneer CDX-FM687 6-Disc CD Changer work with any head unit?

Last Answer : The Pioneer CDX-FM687 will work with any head unit, but works best with other Pioneer units.

Will my Kenwood KDC-C719 10-Disc CD Changer be able to play my burned cds?

Description : Will my Kenwood KDC-C719 10-Disc CD Changer be able to play my burned cds?

Last Answer : The Kenwood KDC-C719 is compatible with CD-R media.

Is the Kenwood KDC-C669 6-Disc CD Changer better overall in comparison to the Pioneer CDX-FM687 6-Disc CD Changer ?

Description : Is the Kenwood KDC-C669 6-Disc CD Changer better overall in comparison to the Pioneer CDX-FM687 6-Disc CD Changer ?

Last Answer : The Kenwood KDC-C669 gets slightly better reviews from users.Neither is really setting the world on fire with enthusiasm.

How do you prevent the CDs from getting stuck in a car CD changer?

Description : How do you prevent the CDs from getting stuck in a car CD changer?

Last Answer : You need to clean the CD Changer every 6 months to ensure the CD Changer runs smoothly.

how does a car cd changer work?

Description : how does a car cd changer work?

Last Answer : A car CD changer works by being placed in a trunk and mechanically rotating the discs to be read.

What are the advantages of a removeable face plate on my cd changer?

Description : What are the advantages of a removeable face plate on my cd changer?

Last Answer : A removable face plate helps to deter theft if removed upon exiting the car.

How many cd's does the typical cd changer hold?

Description : How many cd's does the typical cd changer hold?

Last Answer : Typical changers carry around 6 to 12 cds.

Does a car cd changer draw of lot of power from your battery?

Description : Does a car cd changer draw of lot of power from your battery?

Last Answer : That won't usually be a problem so long as you follow instructions and you don't have a lot of other things drawing power.

Where can I get voice changer software?

Description : Where can I get voice changer software?

Last Answer : You should try DynaSpy, they have a pretty good voice software program available.

Before touching a small capacitor connected to a de-energized circuit, or even one that is completely disconnected, you should ____________. A. gently tap the body with a screwdriver B. tag it with a de-energized tag C. be equipped with an insulated fuse puller D. short circuit the terminals to make sure that the capacitor is discharged

Description : Before touching a small capacitor connected to a de-energized circuit, or even one that is completely disconnected, you should ____________. A. gently tap the body with a screwdriver B. tag it ... insulated fuse puller D. short circuit the terminals to make sure that the capacitor is discharged

Last Answer : Answer: D

In a Tap changing transformer on which side is the tap connected, primary side or secondary side?

Description : In a Tap changing transformer on which side is the tap connected, primary side or secondary side?

Last Answer : A. Tapings are always connected to high voltage winding side, because of low current. If we connect tapings to low voltage side, sparks will produce while tap changing operation due to high current.

Why the tap changers are always connected to HV side of the transformer?

Description : Why the tap changers are always connected to HV side of the transformer? 

Last Answer : During tap changing action the load current has to be shifted from one tap to another tap. In case HV wining the load current will be less. Hence lesser arcing will take place. 

What's the point of learning History and Math in schools when we have all information we could ever need, just one tap away on our phones?

Description : What's the point of learning History and Math in schools when we have all information we could ever need, just one tap away on our phones?

Last Answer : Because you have to learn to ask the right questions.

You find a herbaceous flowering plant growing in your school garden having leaves with parallel venation. Choose the correct additional features the given plant would be possessing. (I) It has no secondary vascular tissues. (II) Its flower possesses three sepals. (Ill) It possesses tap root. (IV) Its embryo has 2 cotyledons. (1) (I) and (II) (2) (I) and (III) (3) (II) and (IV) (4) (III) and (IV)

Description : You find a herbaceous flowering plant growing in your school garden having leaves with parallel venation. Choose the correct additional features the given plant would be possessing. (I) It has no secondary vascular tissues. (II) Its flower ... (2) (I) and (III) (3) (II) and (IV) (4) (III) and (IV)

Last Answer : 1) (I) and (II)

You're in a magical bathroom with no windows and the only way things can get in and out is by an open door. You decide to have a bath so you turn on the tap, you shut the door and the handle breaks so you can't open it, you then turn off the tap and the knob breaks so water keeps coming. How do you save yourself from drowning? -Riddles

Description : You're in a magical bathroom with no windows and the only way things can get in and out is by an open door. You decide to have a bath so you turn on the tap, you shut the door and the ... turn off the tap and the knob breaks so water keeps coming. How do you save yourself from drowning? -Riddles

Last Answer : Pull out the plug in the bath.

Which of the terms listed best describes a compound-wound DC generator having a higher voltage at no load than at full load? A. Flat compounded B. Over compounded C. Under compounded D. Terminal compounded

Description : Which of the terms listed best describes a compound-wound DC generator having a higher voltage at no load than at full load? A. Flat compounded B. Over compounded C. Under compounded D. Terminal compounded

Last Answer : Answer: C

Which of the following plant is having lowest load factor? a) Diesel Plant b) Pumped storage Plant c) Thermal Plant d) Nuclear Plant

Description : Which of the following plant is having lowest load factor? a) Diesel Plant b) Pumped storage Plant c) Thermal Plant d) Nuclear Plant

Last Answer : Ans: Diesel Plan

Is it a wise choice to upgrade my GeForce GT 440 to GTS 450?

Description : Is it a wise choice to upgrade my GeForce GT 440 to GTS 450?

Last Answer : answer:GTX or GTFO. Seriously, given the price of the lower GTX-series compared to the performance, the GTS series isn’t worthwhile. Or, if you don’t mind AMD, the R7 is a good value. The R7 260X runs around $100–120 and is twice as powerful as the GTS450.

How do I stop Dual clock on a Samsung Galaxy Ace GT-S5830i?

Description : How do I stop Dual clock on a Samsung Galaxy Ace GT-S5830i?

Last Answer : answer:You mean that it won’t allow you to remove the widget in the normal manner? When in doubt, uninstall.

GT Legends Game Mod; Help please?

Description : GT Legends Game Mod; Help please?

Last Answer : Here is a cheat that will unlock everything, which I guess will render money useless. Unlock all tracks and cars. Create an empty file named “TG2001.DYN” in your GTL installation direction. Any new profiles created in-game thereafter will have all tracks and cars unlocked from the start.

In GT games to come do you think Porsche should be a real name , rather that of the powering brand RUF?

Description : In GT games to come do you think Porsche should be a real name , rather that of the powering brand RUF?

Last Answer : There are always licensing troubles with Porche, but yes, it would be nice. According to all of the trailers and interviews, there will be real damage modeling.

How much do u think it will cost to tint the windows on a 2000 ford mustang gt?

Description : How much do u think it will cost to tint the windows on a 2000 ford mustang gt?

Last Answer : your credability?

How much is it for a real flow master fot a mustang 2000 gt? What about a hood scooop?

Description : How much is it for a real flow master fot a mustang 2000 gt? What about a hood scooop?

Last Answer : FLow master exhaust has nothing to do with a hood scoop. They vary in price depending on what kind you want to get. Straight pipes with baffles? Curved pipes? 2 , 3 ???? Stainless, ceramic? I paid around ... K&N intake set ups. Are you looking to just beef up your ride or are you going to race it?

Pontiac G6 GT brake lights always on?

Description : Pontiac G6 GT brake lights always on?

Last Answer : answer:Maybe something is loose, such as the wiring? In all seriousness though, your best bet is to get rid of the G6.

In ship manufacturing, the type of layout preferred is a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Description : In ship manufacturing, the type of layout preferred is a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : c.Fixed-position layout

The following type of layout is preferred for low volume production of non-standard products a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Description : The following type of layout is preferred for low volume production of non-standard products a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : b.Process layout

The following type of layout is preferred to manufacture a standard product in large quantity a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Description : The following type of layout is preferred to manufacture a standard product in large quantity a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : a.Product layout

If all the processing equipment and machines are arranged according to the sequence ofoperations of a product the layout is known as a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Description : If all the processing equipment and machines are arranged according to the sequence ofoperations of a product the layout is known as a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : a.Product layout

From the following in which type of GT code tree-type structure is used? a.Poly code b.Hybrid code c.Mono code d.None of the above

Description : From the following in which type of GT code tree-type structure is used? a.Poly code b.Hybrid code c.Mono code d.None of the above

Last Answer : c.Mono code

From the following in which type of GT code chain-type structure is used? a.Poly code b.Hybrid code c.Mono code d.None of the above

Description : From the following in which type of GT code chain-type structure is used? a.Poly code b.Hybrid code c.Mono code d.None of the above

Last Answer : a.Poly code