How selection of cooling fluid in GT done?

How selection of cooling fluid in GT done? 
by

1 Answer

Answer :

a) There are 5 factors are there.

b) Density

c) Coefficient of thermal expansion

d) Viscosity

e) Specific heat

f) Thermal conductivity. 
by

Related questions

The emergency electrical power source on tank vessels over 500 GT on an international voyage, should be capable of continuous operation under emergency load for _____________. A. 6 hours B. 12 hours C. 18 hours D. 24 hours

Description : The emergency electrical power source on tank vessels over 500 GT on an international voyage, should be capable of continuous operation under emergency load for _____________. A. 6 hours B. 12 hours C. 18 hours D. 24 hours

Last Answer : Answer: C

Why our GT having off load tap changer?

Description : Why our GT having off load tap changer?

Last Answer : Because our station is base load station.  

What is the vector group of GT, UT, SUT?

Description : What is the vector group of GT, UT, SUT?

Last Answer : Yd11 Dy1 Yy0 

What is the advantage of Pressure relief device in TELK type GT over explosion vent of BHEL, even though in both cases oil will be expelled out during sudden pressure rise?

Description : What is the advantage of Pressure relief device in TELK type GT over explosion vent of BHEL, even though in both cases oil will be expelled out during sudden pressure rise?

Last Answer : During internal fault, the internal pressure rise is relieved by the expelling out of oil through Pressure relief device /explosion vent. However the Pressure relief device closes back when the pressure ... hazard due to transformer oil does not exist after the closure of Pressure relief device. 

What is the type of lightning arrestor for GT?

Description : What is the type of lightning arrestor for GT? 

Last Answer : Zn O (zinc oxide) types.  

Why off load tap changer was chosen for GT?

Description : Why off load tap changer was chosen for GT?

Last Answer : Because our plant works on base load always.  

What are the effects of GT over fluxing?

Description : What are the effects of GT over fluxing? 

Last Answer : a. Eddy current circulation. b. Magnetising current increases c. Winding temp increases d. Transformer noise/vibration increases. e. Over heating of non laminated metal parts (affected by stray fluxes) 

Why REF is now is used for HV side also in GT/SUT?

Description : Why REF is now is used for HV side also in GT/SUT?

Last Answer : The E/F setting of differential is poor.  

In which layout manufacturing is done according to product's characteristics? a.Process layout b.GT layout c.Product layout d.Both A & B

Description : In which layout manufacturing is done according to product's characteristics? a.Process layout b.GT layout c.Product layout d.Both A & B

Last Answer : d.Both A & B

In which layout manufacturing is done according to machine arrangement a.GT layout b.Product layout c.Process layout d.Hybrid layout

Description : In which layout manufacturing is done according to machine arrangement a.GT layout b.Product layout c.Process layout d.Hybrid layout

Last Answer : c.Process layout

How cooling is done for slip ring and brush gear?

Description : How cooling is done for slip ring and brush gear? 

Last Answer : A centrifuge fan is mounted on the shaft in between two slip rings for ventilation of the slip rings and brush gear.

A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Description : A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Last Answer : (A) Incurs smaller pressure drop

Pick out the correct statement. (A) Human blood is a Newtonian fluid (B) A Newtonian fluid obeys Newton's law of cooling (C) For a non-Newtonian fluid, a straight line passes through the origin in a plot between shear stress and shear gradien

Description : Pick out the correct statement. (A) Human blood is a Newtonian fluid (B) A Newtonian fluid obeys Newton's law of cooling (C) For a non-Newtonian fluid, a straight line passes through the origin in a plot between shear stress and shear gradien

Last Answer : (B) A Newtonian fluid obeys Newton's law of cooling

The force exerted by a moving fluid on an immersed body is directly proportional to the rate of change of momentum due to the presence of the body. This statement is called (A) Newton's law of motion (B) Newton's law of cooling (C) Newton's law of viscosity (D) Newton's law of resistance

Description : The force exerted by a moving fluid on an immersed body is directly proportional to the rate of change of momentum due to the presence of the body. This statement is called (A) Newton's law of motion (B) Newton's law of cooling (C) Newton's law of viscosity (D) Newton's law of resistance

Last Answer : Answer: Option D

The theory that heat consisted of a fluid, which could be transferred from one body to another, but not “created” or “destroyed”.  a. Clausius Theorem  b. Caloric Theory  c. Joules Law  d. Newton’s Law of cooling

Description : The theory that heat consisted of a fluid, which could be transferred from one body to another, but not “created” or “destroyed”.  a. Clausius Theorem  b. Caloric Theory  c. Joules Law  d. Newton’s Law of cooling

Last Answer : Caloric Theory

Which of the listed conditions occur when selection is made for 'third point hoist' on the winch shown in the illustration? EL-0102 A. Master switch contacts '5', '6', '7', '8', and '9' close. B. Contactors '2M', '3M', '4M' and '1A' pick up. C. Contactors '1M', 3M', '1A' and '2A' drop out. D. Master switch contacts '3','4', '6', '8', and '9' close.

Description : Which of the listed conditions occur when selection is made for 'third point hoist' on the winch shown in the illustration? EL-0102 A. Master switch contacts '5', '6', '7', '8', and '9' close. B. Contactors '2M', ' ... ' and '2A' drop out. D. Master switch contacts '3','4', '6', '8', and '9' close.

Last Answer : Answer: D

The 'function generator' of the control circuit illustrated _______________. EL-0095 A. can be programmed to produce a non-linear output for a linear input depending on operating conditions B. is used for controlling relay contacts' positions in selection circuits C. automatically selects which or how many engines are needed for a required vessel speed D. all of the above

Description : The 'function generator' of the control circuit illustrated _______________. EL-0095 A. can be programmed to produce a non-linear output for a linear input depending on operating conditions B. is used for ... which or how many engines are needed for a required vessel speed D. all of the above

Last Answer : Answer: A

What is the basis of selection of electrical transmission voltage?

Description : What is the basis of selection of electrical transmission voltage?

Last Answer : 1. Material of transmission line. 2. Rating of wire. 3. Environments 4. Load to be driven and many more things

What is the condition to be satisfied in the selection of L and C in a series inverter?

Description : What is the condition to be satisfied in the selection of L and C in a series inverter?

Last Answer : R2< 4LC

What are the different factors for the selection of electrical drives?

Description : What are the different factors for the selection of electrical drives?

Last Answer : Steady state operation requirements Transient operation requirements Requirements related to the source Capital and running cost, maintenance needs, life Space and weight restrictions Environment and location Reliability

What are the factors affecting the selection of Maximum flux density?

Description : What are the factors affecting the selection of Maximum flux density?

Last Answer : 1. Net core weight: Higher the flux density lesser net weight of core. 2.Saving in copper:Higher the flux density lesser mean turn of windings. 3.Overall economy: Higher the flux ... High Flux density results in high losses and hence efficiency decreases 8.Hence high temperature rise and noise

What are the points to be considered for MCB (miniature circuit breaker selection)?

Description : What are the points to be considered for MCB (miniature circuit breaker selection)?

Last Answer :  I(L)x1.25=I(MAX) maximum current. Mcb specification is done on maximum current flow in circuit.

In Gauss Seidel method the following factors are influenced for operation a) Acceleration factor b) Selection of slack buss c) Both d) None

Description : In Gauss Seidel method the following factors are influenced for operation a) Acceleration factor b) Selection of slack buss c) Both d) None

Last Answer : Ans: Selection of slack buss*

Is it a wise choice to upgrade my GeForce GT 440 to GTS 450?

Description : Is it a wise choice to upgrade my GeForce GT 440 to GTS 450?

Last Answer : answer:GTX or GTFO. Seriously, given the price of the lower GTX-series compared to the performance, the GTS series isn’t worthwhile. Or, if you don’t mind AMD, the R7 is a good value. The R7 260X runs around $100–120 and is twice as powerful as the GTS450.

How do I stop Dual clock on a Samsung Galaxy Ace GT-S5830i?

Description : How do I stop Dual clock on a Samsung Galaxy Ace GT-S5830i?

Last Answer : answer:You mean that it won’t allow you to remove the widget in the normal manner? When in doubt, uninstall.

GT Legends Game Mod; Help please?

Description : GT Legends Game Mod; Help please?

Last Answer : Here is a cheat that will unlock everything, which I guess will render money useless. Unlock all tracks and cars. Create an empty file named “TG2001.DYN” in your GTL installation direction. Any new profiles created in-game thereafter will have all tracks and cars unlocked from the start.

In GT games to come do you think Porsche should be a real name , rather that of the powering brand RUF?

Description : In GT games to come do you think Porsche should be a real name , rather that of the powering brand RUF?

Last Answer : There are always licensing troubles with Porche, but yes, it would be nice. According to all of the trailers and interviews, there will be real damage modeling.

How much do u think it will cost to tint the windows on a 2000 ford mustang gt?

Description : How much do u think it will cost to tint the windows on a 2000 ford mustang gt?

Last Answer : your credability?

How much is it for a real flow master fot a mustang 2000 gt? What about a hood scooop?

Description : How much is it for a real flow master fot a mustang 2000 gt? What about a hood scooop?

Last Answer : FLow master exhaust has nothing to do with a hood scoop. They vary in price depending on what kind you want to get. Straight pipes with baffles? Curved pipes? 2 , 3 ???? Stainless, ceramic? I paid around ... K&N intake set ups. Are you looking to just beef up your ride or are you going to race it?

Pontiac G6 GT brake lights always on?

Description : Pontiac G6 GT brake lights always on?

Last Answer : answer:Maybe something is loose, such as the wiring? In all seriousness though, your best bet is to get rid of the G6.

In ship manufacturing, the type of layout preferred is a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Description : In ship manufacturing, the type of layout preferred is a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : c.Fixed-position layout

The following type of layout is preferred for low volume production of non-standard products a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Description : The following type of layout is preferred for low volume production of non-standard products a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : b.Process layout

The following type of layout is preferred to manufacture a standard product in large quantity a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Description : The following type of layout is preferred to manufacture a standard product in large quantity a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : a.Product layout

If all the processing equipment and machines are arranged according to the sequence ofoperations of a product the layout is known as a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Description : If all the processing equipment and machines are arranged according to the sequence ofoperations of a product the layout is known as a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : a.Product layout

From the following in which type of GT code tree-type structure is used? a.Poly code b.Hybrid code c.Mono code d.None of the above

Description : From the following in which type of GT code tree-type structure is used? a.Poly code b.Hybrid code c.Mono code d.None of the above

Last Answer : c.Mono code

From the following in which type of GT code chain-type structure is used? a.Poly code b.Hybrid code c.Mono code d.None of the above

Description : From the following in which type of GT code chain-type structure is used? a.Poly code b.Hybrid code c.Mono code d.None of the above

Last Answer : a.Poly code

____ is a highly automated group of GT machine cell. a.Flexible manufacturing system b.Group technology c.Automated system d.None of the above

Description : ____ is a highly automated group of GT machine cell. a.Flexible manufacturing system b.Group technology c.Automated system d.None of the above

Last Answer : a.Flexible manufacturing system

____ is a collection of parts which have similar characteristics a.Part family b.Mono family c.GT family d.Poly family

Description : ____ is a collection of parts which have similar characteristics a.Part family b.Mono family c.GT family d.Poly family

Last Answer : a.Part family

How much is the difference between a GTX 560 and a GT 1030?

Description : ?

Last Answer : More in price than speed. I think it’s even easier to use the older 560 in this category. Due to the different developments of the larger ones, it is worth choosing the new one if you have the money. I am thinking here of graphic improvements.

samsung galaxy s3 gt i9300 immediately after switching on, it locks on the locking surface and nothing goes wrong with it .. not even the three-button works, it also cuts

Description : I really don't know what to do with what the repair or the price would be ... I don't understand the phones at all Thank you in advance

Last Answer : How long have you had your mobile? I have experience with Samsung that after about a year and a half it will get stuck. If this happens, it helps me remove the back cover with the battery for a while ... again. If the locking area remained on the display, I would take it for service, I have no idea.

Samsung GT-S5610 cannot be turned on after resetting

Description : Hi, I have a Samsung GT-S5610 business phone and I need to return it to the company, so I reset it and after the phone showed me that it needs to be restarted, it can't be turned on. When I turn it ... , flashes, etc. all the time. I can't handle it at all. Can anyone please advise me? Thank you.

Last Answer : It's best to go to the service and get advice

how to change head gaskets on a 2003 mustang gt

Description : how to change head gaskets on a 2003 mustang gt

Last Answer : Click here for instructions > http://www.ehow.com/how_7628648_replace-head-gasket-mustang-v6.html

The Characters Trunks and Pan On Dragon Ball Z/ Gt, Is It True They Become A Couple.

Description : The Characters Trunks and Pan On Dragon Ball Z/ Gt, Is It True They Become A Couple.

Last Answer : They are fake characters. Why is this so important to you? Are you lacking love in your life? They are not for real in the real world either. They are created characters. Get outside and play, get off the computer. Your brain is starving for oxygen.

The area bounded by the lines `y = 2, x =1, x = a` and the curve `y = f(x),` which cuts the last two lines above first line for all `a gt= 1,` is equa

Description : The area bounded by the lines `y = 2, x =1, x = a` and the curve `y = f(x),` which cuts the last two lines above first line for all `a gt= 1,` is equa

Last Answer : The area bounded by the lines `y = 2, x =1, x = a` and the curve `y = f(x),` which cuts the last two ... , x ge 1` C. ` 2 sqrtx , x ge 1` D. None

Statement -I: If `alpha gt beta gt 1`, then `(alpha^(sqrt(log_(alpha)beta)))/(beta^(sqrt(log_(beta)alpha)))` is greater than 1. Statement-2 : `log_(c)

Description : Statement -I: If `alpha gt beta gt 1`, then `(alpha^(sqrt(log_(alpha)beta)))/(beta^(sqrt(log_(beta)alpha)))` is greater than 1. Statement-2 : `log_(c)

Last Answer : Statement -I: If `alpha gt beta gt 1`, then `(alpha^(sqrt(log_(alpha)beta)))/(beta^(sqrt(log_( ... . D. Statement -1 is false, statement -2 is ture.

Find the maximum value of the function `(log x)/x " when "x gt 0`.

Description : Find the maximum value of the function `(log x)/x " when "x gt 0`.

Last Answer : Find the maximum value of the function `(log x)/x " when "x gt 0`.

If `a gt 0` and `n` is any positive integer, then the sign of `root(n)(a)` is _______.

Description : If `a gt 0` and `n` is any positive integer, then the sign of `root(n)(a)` is _______.

Last Answer : If `a gt 0` and `n` is any positive integer, then the sign of `root(n)(a)` is _______.

The positive integer value of `n gt 3` satisfying the equation `(1)/(sin((pi)/(n)))=(1)/(sin((2pi)/(n)))+(1)/(sin((3pi)/(n)))` is

Description : The positive integer value of `n gt 3` satisfying the equation `(1)/(sin((pi)/(n)))=(1)/(sin((2pi)/(n)))+(1)/(sin((3pi)/(n)))` is

Last Answer : The positive integer value of `n gt 3` satisfying the equation `(1)/(sin((pi)/(n)))=(1)/(sin((2pi)/(n)))+(1)/(sin((3pi)/(n)))` is

Number of solution of `sinx cosx-3cosx+4sinx-13 gt 0` in `[0,2pi]` is equal to

Description : Number of solution of `sinx cosx-3cosx+4sinx-13 gt 0` in `[0,2pi]` is equal to

Last Answer : Number of solution of `sinx cosx-3cosx+4sinx-13 gt 0` in `[0,2pi]` is equal to A. `0` B. `1` C. `2` D. `4`

Number of positive integral solution of the equation `|x^(2)-3x-3| gt |x^(2)+7x-13|` is/are

Description : Number of positive integral solution of the equation `|x^(2)-3x-3| gt |x^(2)+7x-13|` is/are

Last Answer : Number of positive integral solution of the equation `|x^(2)-3x-3| gt |x^(2)+7x-13|` is/are A. `0` B. `1` C. `2 D. `3`