If water in a lake were to behave like other liquids, then in extremely cold weather it would freeze (a) from top to bottom (b) from bottom to top (c) simultaneously throughout the depth (d) first on the surface, bottom and sides and then in the interior

If water in a lake were to behave like other liquids, then in extremely cold weather it would freeze (a) from top to bottom (b) from bottom to top (c) simultaneously throughout the depth (d) first on the surface, bottom and sides and then in the interior
by

1 Answer

Answer :

Ans:(b)
by
selected

Related questions

A lake starts freezing because of the cold atmosphere. It will first freeze A. At the bottom B. ln the middle pan C. At the top surface (Answer) D. Uniformly throughout the water body

Description : A lake starts freezing because of the cold atmosphere. It will first freeze A. At the bottom B. ln the middle pan C. At the top surface (Answer) D. Uniformly throughout the water body

Last Answer : C. At the top surface (Answer)

A lake starts freezing because of the cold atmosphere, It will first freeze A. At the bottom B. In the middle part C. At the top surface D. Uniformly throughout the water body

Description : A lake starts freezing because of the cold atmosphere, It will first freeze A. At the bottom B. In the middle part C. At the top surface D. Uniformly throughout the water body

Last Answer : ANSWER: C

If water contracts on freezing, which of the following would happen? (a) Icebergs will completely float on the surface of water (b) Ice would become more dense (c) Lakes would freeze from top to bottom (d) Rocks will crack due to freezing of internal water

Description : If water contracts on freezing, which of the following would happen? (a) Icebergs will completely float on the surface of water (b) Ice would become more dense (c) Lakes would freeze from top to bottom (d) Rocks will crack due to freezing of internal water

Last Answer : Ans:(b)

Fish can survive inside a frozen lake because (a) fish are warm blooded animals (b) fish hibernate in ice (c) water near the bottom does not freeze (d) ice is a good conductor of heat

Description : Fish can survive inside a frozen lake because (a) fish are warm blooded animals (b) fish hibernate in ice (c) water near the bottom does not freeze (d) ice is a good conductor of heat

Last Answer : Ans:(c)

Sago damage from cold weather. Grows from bottom but not top

Description : Sago damage from cold weather. Grows from bottom but not top

Last Answer : Need Answer

Lake Freeze in cold countries in winter, leaving the water underneath at

Description : Lake Freeze in cold countries in winter, leaving the water underneath at

Last Answer : 40F

Inside the distillation column, the (A) Driving force for the vapour flow is the pressure drop (B) Liquids are not always at their bubble points (C) Pressure increases gradually from bottom to the top of the column (D) None of these

Description : Inside the distillation column, the (A) Driving force for the vapour flow is the pressure drop (B) Liquids are not always at their bubble points (C) Pressure increases gradually from bottom to the top of the column (D) None of these

Last Answer : (A) Driving force for the vapour flow is the pressure drop

In an operating distillation column, the (A) Vapors and liquids are at their dew point and bubble point respectively (B) Driving force for the liquid flow is its specific weight (C) Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column (D) Highest temperature is encountered at the top of the column

Description : In an operating distillation column, the (A) Vapors and liquids are at their dew point and bubble point respectively (B) Driving force for the liquid flow is its specific weight (C) Driving force for ... bottom to the top of the column (D) Highest temperature is encountered at the top of the column

Last Answer : (C) Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column

The freezer in a refrigerator is fitted near the top (a) to keep it away from the hot compressor which is near the bottom (b) because of convenience (c) so that it can cool the whole interior by setting up convection currents (d) without any specific purpose

Description : The freezer in a refrigerator is fitted near the top (a) to keep it away from the hot compressor which is near the bottom (b) because of convenience (c) so that it can cool the whole interior by setting up convection currents (d) without any specific purpose

Last Answer : Ans:(c)

A distillation column with N plates is being operated under normal conditions. At some point of time, the operation is shifted to total reflux condition (i.e., no product and residue are being withdrawn and feed to the column is stopped). At the new steady state, (A) Composition of vapors and that of liquid do not vary throughout the column (B) Reboiler load and condenser load are minimum (C) The top and bottom compositions are unchanged with and without total reflux (D) The top and bottom compositions correspond to the maximum enrichment available

Description : A distillation column with N plates is being operated under normal conditions. At some point of time, the operation is shifted to total reflux condition (i.e., no product and residue are ... and without total reflux (D) The top and bottom compositions correspond to the maximum enrichment available

Last Answer : (D) The top and bottom compositions correspond to the maximum enrichment available

If the depth of actual neutral axis is greater than the depth of critical neutral axis, then [ A ] Concrete attains its permissible stress earlier [ B ] Steel attains its permissible stress earlier [ C ] Both concrete and steel reaches its permissible stresses simultaneously [ D ] None of the above

Description : If the depth of actual neutral axis is greater than the depth of critical neutral axis, then [ A ] Concrete attains its permissible stress earlier [ B ] Steel attains its permissible stress earlier [ C ] Both concrete and steel reaches its permissible stresses simultaneously [ D ] None of the above

Last Answer : [ A ] Concrete attains its permissible stress earlier

Two taps P and Q can separately fill a tank in 120mins and 150 mins respectively. There is a 3rd tap in the bottom of the tank to empty it. If all of the 3 taps are simultaneously opened, then the tank is full in 100 mins. In how much time the 3rd pipe alone can empty the tank? A) 100 B) 200 C) 300 D) 400

Description : Two taps P and Q can separately fill a tank in 120mins and 150 mins respectively. There is a 3rd tap in the bottom of the tank to empty it. If all of the 3 taps are simultaneously opened, then the tank is full ... . In how much time the 3rd pipe alone can empty the tank? A) 100 B) 200 C) 300 D) 400

Last Answer : B Work done by the 3 tap in 1 min = 1/100 – ( 1/120 + 1/150) = 1/100 – (5+4/600) =1/100 – 9/600 =6-9/600 = - 3/600 = - 1/200(negative signs mean empting) Therefore the 3rd tap alone can empty the tank in 200 mins

From a point O in the interior of a DABC if perpendiculars OD, OE and OF are drawn to the sides BC, CA and AB respectively, then which of the -Maths 9th

Description : From a point O in the interior of a DABC if perpendiculars OD, OE and OF are drawn to the sides BC, CA and AB respectively, then which of the -Maths 9th

Last Answer : (i) In Δ O C E ,D C 2 = D E 2 + E C 2 Δ O B D , D B 2 = O D 2 + B D 2 Δ O A F , O A 2 = O F 2 + A F 2 Adding we get O A 2 + O B 2 + O C 2 = O F 2 + O D 2 + O F 2 + E C 2 + B D 2 + A F 2 A F 2 + B D 2 + C E 2 = O A

The wall of a dam is made thicker at the bottom than at the top because the pressure exerted by the water on the wall (1) depends on the thickness of the wall (2) increases with height of the wall (3) increases with depth of the wall (4) depends on the area of the wall

Description : The wall of a dam is made thicker at the bottom than at the top because the pressure exerted by the water on the wall (1) depends on the thickness of the wall (2) increases with height of the wall (3) increases with depth of the wall (4) depends on the area of the wall

Last Answer :  increases with depth of the wall

Leidenfrost point is a term concerned with the (A) Condensation of the saturated vapor on a cold surface (B) Concentration of a corrosive solution by evaporation (C) Heat transfer between two highly viscous liquids (D) Boiling of a liquid on a hot surface

Description : Leidenfrost point is a term concerned with the (A) Condensation of the saturated vapor on a cold surface (B) Concentration of a corrosive solution by evaporation (C) Heat transfer between two highly viscous liquids (D) Boiling of a liquid on a hot surface

Last Answer : (D) Boiling of a liquid on a hot surface

if the total is 49cm, and we already know top and bottom the the square is 7cm, how much in cm is the sides?

Description : if the total is 49cm, and we already know top and bottom the the square is 7cm, how much in cm is the sides?

Last Answer : 17.5cm

In sewers the effect of scouring is more on A. Top side B. Bottom side C. Horizontal side D. All sides

Description : In sewers the effect of scouring is more on A. Top side B. Bottom side C. Horizontal side D. All sides

Last Answer : ANS: B

Which one of the following statements regarding septic tanks is wrong? A. A gap of 7.5 cm between the bottom of the covering slab and the top level of scum is provided B. The outlet invert level is kept 5 to 7.5 cm below the inlet invert level C. The minimum width of septic level is 90 cm D. The depth of tank is kept equal to its width

Description : Which one of the following statements regarding septic tanks is wrong? A. A gap of 7.5 cm between the bottom of the covering slab and the top level of scum is provided B. The outlet invert level is kept ... . The minimum width of septic level is 90 cm D. The depth of tank is kept equal to its width

Last Answer : ANS: D

The maximum compressive stress at the top of a beam is 1600 kg/cm2 and the corresponding tensile stress at its bottom is 400 kg/cm2 . If the depth of the beam is 10 cm, the neutral axis from the top, is(A) 2 cm (B) 4 cm (C) 6 cm (D) 8 cm

Description : The maximum compressive stress at the top of a beam is 1600 kg/cm2 and the corresponding tensile stress at its bottom is 400 kg/cm2 . If the depth of the beam is 10 cm, the neutral axis from the top, is (A) 2 cm (B) 4 cm (C) 6 cm (D) 8 cm

Last Answer : (D) 8 cm

The discharge through a channel of trapezoidal section is maximum when (A) Width of channel at the top is equal to twice the width at the bottom (B) Depth of channel is equal to the width at the bottom (C) The sloping side is equal to half the width at the top (D) The sloping side is equal to the width at the bottom

Description : The discharge through a channel of trapezoidal section is maximum when (A) Width of channel at the top is equal to twice the width at the bottom (B) Depth of channel is equal to the width at the bottom ... equal to half the width at the top (D) The sloping side is equal to the width at the bottom

Last Answer : Answer: Option C

The effective depth of a T-beam is the distance between the (a) Centre of the flange and the top of the tensile reinforcement (b) Top of the flange and the centre of the tensile reinforcement (c) Bottom of the flange and the centre of the tensile reinforcement (d) Centre of the flange and the bottom centre of the tensile reinforcement

Description : The effective depth of a T-beam is the distance between the (a) Centre of the flange and the top of the tensile reinforcement (b) Top of the flange and the centre of the tensile ... centre of the tensile reinforcement (d) Centre of the flange and the bottom centre of the tensile reinforcement

Last Answer : (b) Top of the flange and the centre of the tensile reinforcement

Depth of construction in a girder bridge means the depth from a) RL to HFL b) RL to top of bed block * c) RL to bottom of bed block d) RL to Bed level

Description : Depth of construction in a girder bridge means the depth from a) RL to HFL b) RL to top of bed block * c) RL to bottom of bed block d) RL to Bed level

Last Answer : b) RL to top of bed block *

Although saturable reactors are extremely useful in some applications, their gain is low because of ____________. A. core hysteresis losses B. inductive reactance in the control winding C. IR drop throughout the load winding D. all of the above

Description : Although saturable reactors are extremely useful in some applications, their gain is low because of ____________. A. core hysteresis losses B. inductive reactance in the control winding C. IR drop throughout the load winding D. all of the above

Last Answer : Answer: A

When a column is supported throughout its length either by masonry walls or by construction on all the sides, then its slenderness ratio is (a) Infinite (b) Zero (c ) Reasonably high (d) Low

Description : When a column is supported throughout its length either by masonry walls or by construction on all the sides, then its slenderness ratio is (a) Infinite (b) Zero (c ) Reasonably high (d) Low

Last Answer : (b) Zero

On all instruments like measuring cylinder, pipette and burette, readings are always taken at the bottom of the meniscus of liquid. This is not true for liquids like A. Oil B. Ink C. Mercury D. Seawater

Description : On all instruments like measuring cylinder, pipette and burette, readings are always taken at the bottom of the meniscus of liquid. This is not true for liquids like A. Oil B. Ink C. Mercury D. Seawater

Last Answer : Mercury

In a very low temperature which from the following will freeze at last? A. River water B. Canal water C. Sea water (Answer) D. Water in a lake

Description : In a very low temperature which from the following will freeze at last? A. River water B. Canal water C. Sea water (Answer) D. Water in a lake

Last Answer : C. Sea water (Answer)

The Richter Scale is used for measuring of – A) Density of liquids B) Speed of Aeroplane C) Intensity of earthquakes D) Depth of mines.

Description : The Richter Scale is used for measuring of – A) Density of liquids B) Speed of Aeroplane C) Intensity of earthquakes D) Depth of mines.

Last Answer : C) Intensity of earthquakes

If the depth of actual neutral axis of a doubly reinforced beam (A) Is greater than the depth of critical neutral axis, the concrete attains its maximum stress earlier (B) Is less than the depth of critical neutral axis, the steel in the tensile zone attains its maximum stress earlier (C) Is equal to the depth of critical neutral axis; the concrete and steel attain their maximum stresses simultaneously (D) All the above

Description : If the depth of actual neutral axis of a doubly reinforced beam (A) Is greater than the depth of critical neutral axis, the concrete attains its maximum stress earlier (B) Is less ... critical neutral axis; the concrete and steel attain their maximum stresses simultaneously (D) All the above

Last Answer : Answer: Option D

Two tap can fill a dumper in 7 hrs and 8 hrs respectively. The taps are opened simultaneously and it is found that due to leakage in the bottom it took 16 mins more to fill the dumper. When the dumper is full, in what time will the leak empty it? A) 56hrs B) 56hrs C) 46hrs D) 36hrs

Description : Two tap can fill a dumper in 7 hrs and 8 hrs respectively. The taps are opened simultaneously and it is found that due to leakage in the bottom it took 16 mins more to fill the dumper. When the dumper is full, in what time will the leak empty it? A) 56hrs B) 56hrs C) 46hrs D) 36hrs

Last Answer : A Work done by 2 taps in 1 hr = (1/7 + 1/8) = 15/56 Time taken by these taps to fill the dumper = 56/15 hrs =3 hrs 44 mins Due to leakage, time taken = 3 hrs +44mins+16 mins =4hrs Work done by (2 ... the leak in 1 hr = (15/56 - ¼) =15 - 4/56 =1/56 Leak will empty the full cistern in 56 hrs.

From a point in the interior of an equilateral triangle, perpendiculars are drawn on the three sides. -Maths 9th

Description : From a point in the interior of an equilateral triangle, perpendiculars are drawn on the three sides. -Maths 9th

Last Answer : Let each side of ㎝ equilateral triangle ABC be ′a′㎝ Now, ar△OAB=21 AB OP=21 a 14=7a㎠→1 ar△OBC= BC OQ =21 a 10=5a㎠→2 ar△OAC=21 AC OR=21 a 6=3a㎠→3 ∴ar△ABC=1+2+3=7a+5a+3a=15a㎠ Also area of equilateral ... ABC=43 a2 Now, 43 a2=15a⇒a=3 15 4 3 3 =3603 =203 ㎝ Now, ar△ABC=43 (203 )2=3003 ㎠

From a point in the interior of an equilateral triangle, perpendiculars are drawn on the three sides. -Maths 9th

Description : From a point in the interior of an equilateral triangle, perpendiculars are drawn on the three sides. -Maths 9th

Last Answer : Area of triangle =

If the interior angle of a regular polygon is 162 degrees how many sides does it have?

Description : If the interior angle of a regular polygon is 162 degrees how many sides does it have?

Last Answer : It will have 20 sides

How many sides does it have if a regular polygon has interior angles of 165 degrees?

Description : How many sides does it have if a regular polygon has interior angles of 165 degrees?

Last Answer : Each exterior angle is 180-165 = 15 degrees and so it has 360/15= 24 sides

If the sum of interior angles of a polygon is 4680 degrees how many sides does the polygon have?

Description : If the sum of interior angles of a polygon is 4680 degrees how many sides does the polygon have?

Last Answer : 15 sides

If the number of sides of a polygon is increased by five by how much would the sum of the interior angles of the polygon increase?

Description : If the number of sides of a polygon is increased by five by how much would the sum of the interior angles of the polygon increase?

Last Answer : By 900 degrees as for example a triangle has 3 sides that add upto 180 degrees then if 5 sides are added to it then it then is an 8sided octagon with interior angles that add up to 1080 degrees

How many sides does a regular polygon have if the measure of one interior angle is 105?

Description : How many sides does a regular polygon have if the measure of one interior angle is 105?

Last Answer : Such a polygon is not possible because it would have 4.8 sides.Angles on a straight line are 180 degrees and 105+75 = 180Angles around a polygon are 360 degrees and 360/75 = 4.8

What The sum of the interior angles of a polygons is 7200 degrees how many sides does it have?

Description : What The sum of the interior angles of a polygons is 7200 degrees how many sides does it have?

Last Answer : It will have (7200+360)/180 = 42 sides

If the sum of the measures of the interior angles of a polygon is 1980 how many sides does it have?

Description : If the sum of the measures of the interior angles of a polygon is 1980 how many sides does it have?

Last Answer : The formula for the sum of the angles of an interior polygon is180(n-2), where n is the number of sides, so then you solve180(n-2) = 1980.(n-2) = 11n = 13.So the polygon has 13 sides.

How do you work out the exterior and interior angles of a regular polygon with W sides?

Description : How do you work out the exterior and interior angles of a regular polygon with W sides?

Last Answer : Exterior angle regular polygon = 360° ÷ number of sides = 360° ÷WInterior angle regular polygon = 180° - exterior angle regularpolygon= 180° - (360° ÷ number of sides )= 180° - (360° ÷ W)

How many sides doe the polygon have if the sum of the interior angle of a polygon is 1800 degrees?

Description : How many sides doe the polygon have if the sum of the interior angle of a polygon is 1800 degrees?

Last Answer : It will have (1800+360)/180 = 12 sides

How do you work out the exterior and interior angles of a regular polygon with W sides?

Description : How do you work out the exterior and interior angles of a regular polygon with W sides?

Last Answer : Exterior angle regular polygon = 360° ÷ number of sides = 360° ÷WInterior angle regular polygon = 180° - exterior angle regularpolygon= 180° - (360° ÷ number of sides )= 180° - (360° ÷ W)

What would the total sum of the interior angles be for a polygon with 20 sides?

Description : What would the total sum of the interior angles be for a polygon with 20 sides?

Last Answer : The sum of the interior angles of any regular polygon of n sides is equal to 180(n - 2) degrees. 3240 degrees

What is The inferred temperature and pressure of the earths interior at a depth of 3000 kilometers are approximately?

Description : What is The inferred temperature and pressure of the earths interior at a depth of 3000 kilometers are approximately?

Last Answer : What is the answer ?

If d is the economic designed depth of a slab, the thickness of the cement concrete pavement slab at interior, is kept (A) 1.275 d (B) 1.125 d (C) 0.85 d (D) 0.75 d

Description : If d is the economic designed depth of a slab, the thickness of the cement concrete pavement slab at interior, is kept (A) 1.275 d (B) 1.125 d (C) 0.85 d (D) 0.75 d

Last Answer : Answer: Option C

Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than (A) 42 diameters from the centre of the column (B) 42 diameters from the inner edge of the column (C) 42 diameters from the outer edge of the column (D) 24 diameters from the centre of the column

Description : Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than (A) 42 diameters from the centre of the column (B) 42 diameters from the inner edge of ... ) 42 diameters from the outer edge of the column (D) 24 diameters from the centre of the column

Last Answer : Answer: Option C

The opening into the vagina on the perineum is termed the a) introitus. The introitus is the vaginal orifice. b) adnexa. Adnexa is a term used to describe the fallopian tubes and ovaries together. c) cervix. The cervix is the bottom (interior) part of the uterus that is located in the vagina. hymen. d) The hymen is a tissue that may cover the vaginal opening partially or completely before vaginal penetration.

Description : The opening into the vagina on the perineum is termed the a) introitus. The introitus is the vaginal orifice. b) adnexa. Adnexa is a term used to describe the fallopian tubes and ovaries ... The hymen is a tissue that may cover the vaginal opening partially or completely before vaginal penetration.

Last Answer : a) introitus. The introitus is the vaginal orifice.

Pick up the incorrect statement from the following: (A) The bottom and top ends of slump mould are parallel to each other (B) The axis of the mould is perpendicular to the end faces (C) The internal surface of the mould is kept clean and free from set cement (D) The mould is in the form of a frustum of hexagonal pyramid

Description : Pick up the incorrect statement from the following: (A) The bottom and top ends of slump mould are parallel to each other (B) The axis of the mould is perpendicular to the end faces (C) The ... clean and free from set cement (D) The mould is in the form of a frustum of hexagonal pyramid

Last Answer : Answer: Option D

How does one reconcile the left's commonsense narrative of manmade global warming with the History Channel's assertion that the world's 5 known Extremely Low Frequency (ELF) transmitters can "potentially alter the weather anywhere in the world"*?

Description : How does one reconcile the left's commonsense narrative of manmade global warming with the History Channel's assertion that the world's 5 known Extremely Low Frequency (ELF) transmitters can "potentially alter the weather anywhere in the world"*?

Last Answer : this is why i wear a tinfoil hat