The following element can't impart high strength at elevated temperature A. Manganese B. Magnesium C. Nickel D. Silicon

The following element can't impart high strength at elevated temperature

A. Manganese

B. Magnesium

C. Nickel

D. Silicon
by

1 Answer

Answer :

B. Magnesium
by

Related questions

Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Description : Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Last Answer : : Option B

Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Description : Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Last Answer : Option B

Duralumin is an alloy of (A) Aluminium, copper and manganese (B) Aluminium, nickel and silicon (C) Aluminium and nickel (D) None of these

Description : Duralumin is an alloy of (A) Aluminium, copper and manganese (B) Aluminium, nickel and silicon (C) Aluminium and nickel (D) None of these

Last Answer : (A) Aluminium, copper and manganese

Work hardenable alloy steel used to make the bucket wheel excavators, blades of bulldozers and other earth moving equipments contain iron, carbon and (A) Manganese (B) Silicon (C) Nickel (D) Chromium

Description : Work hardenable alloy steel used to make the bucket wheel excavators, blades of bulldozers and other earth moving equipments contain iron, carbon and (A) Manganese (B) Silicon (C) Nickel (D) Chromium

Last Answer : (A) Manganese

In which of the following all three are macronutrients? (a) Molybdenum, magnesium, manganese (b) Nitrogen, nickel, phosphorus (c) Boron, zinc, manganese (d) Iron, copper, molybdenum

Description : In which of the following all three are macronutrients? (a) Molybdenum, magnesium, manganese (b) Nitrogen, nickel, phosphorus (c) Boron, zinc, manganese (d) Iron, copper, molybdenum

Last Answer : (d) Iron, copper, molybdenum

The yield strength and tensile strength of low carbon steel may be improved by the addition of (A) Manganese (B) Chromium (C) Nickel (D) Vanadium

Description : The yield strength and tensile strength of low carbon steel may be improved by the addition of (A) Manganese (B) Chromium (C) Nickel (D) Vanadium

Last Answer : Answer: Option D

Coloured glass is obtained by mixing of colored salts. Addition of __________ oxide is done to impart greenish blue color to the glass. (A) Chromium (B) Arsenic (C) Copper (D) Manganese

Description : Coloured glass is obtained by mixing of colored salts. Addition of __________ oxide is done to impart greenish blue color to the glass. (A) Chromium (B) Arsenic (C) Copper (D) Manganese

Last Answer : (C) Copper

Which of the following is not a principal alloying element for the structural steel? (A) Molybdenum (B) Nickel (C) Manganese (D) Chromium

Description : Which of the following is not a principal alloying element for the structural steel? (A) Molybdenum (B) Nickel (C) Manganese (D) Chromium

Last Answer : (A) Molybdenum

Weld decay is caused by the formation of a compound with carbon. The other element in this compound is: a) Manganese b) Sulphur c) Chromium d) Nickel

Description : Weld decay is caused by the formation of a compound with carbon. The other element in this compound is: a) Manganese b) Sulphur c) Chromium d) Nickel

Last Answer : c) Chromium

__________ is the most important element, which controls the physical properties of steel. (A) Manganese (B) Silicon (C) Carbon (D) Vanadium

Description : __________ is the most important element, which controls the physical properties of steel. (A) Manganese (B) Silicon (C) Carbon (D) Vanadium

Last Answer : (C) Carbon

The trace element catalyzing hemoglobin synthesis is (A) Manganese (B) Magnesium (C) Copper (D) Selenium

Description : The trace element catalyzing hemoglobin synthesis is (A) Manganese (B) Magnesium (C) Copper (D) Selenium

Last Answer : Answer : C

Which element is located at the centre of the porphyrin ring in chlorophyll? (a) Calcium (b) Magnesium (c) Potassium (d) Manganese

Description : Which element is located at the centre of the porphyrin ring in chlorophyll? (a) Calcium (b) Magnesium (c) Potassium (d) Manganese

Last Answer : (b) Magnesium

Manganese is added in low carbon steel to A. Make the steel tougher and harder B. Raise the yield point C. Make the steel ductile and of good bending qualities D. All of the above

Description : Manganese is added in low carbon steel to A. Make the steel tougher and harder B. Raise the yield point C. Make the steel ductile and of good bending qualities D. All of the above

Last Answer : C. Make the steel ductile and of good bending qualities

Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability to be cast, rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature

Description : Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability ... rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature

Last Answer : (A) High strength to weight ratio

Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum(B) Chromium(C) Vanadium(D) Silicon

Description : Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum (B) Chromium (C) Vanadium (D) Silicon

Last Answer : Option D

Which of the following is an important element of stainless steel. w) chromium x) magnesium y) copper z) nickel

Description : Which of the following is an important element of stainless steel. w) chromium x) magnesium y) copper z) nickel  

Last Answer : ANSWER: W -- CHROMIUM  

The element used for making solar cells is - (1) Magnesium (2) Sodium (3) Calcium (4) Silicon

Description : The element used for making solar cells is - (1) Magnesium (2) Sodium (3) Calcium (4) Silicon

Last Answer : (4) Silicon Explanation: Materials presently used for photovoltaic solar cells include mono-crystalline silicon, polycrystaijhne silicon, amorphous silicon, cadmium telluride, and copper indium selenideisulfide.

What is the element that is in the highest percentage in the composition of the earth? (1) Silicon (2) Oxygen (3) Magnesium (4) Iron

Description : What is the element that is in the highest percentage in the composition of the earth? (1) Silicon (2) Oxygen (3) Magnesium (4) Iron

Last Answer : (2) Oxygen Explanation: Earth, our home, is the third planet from the sun. It is the only planet known to have an atmosphere containing free oxygen, oceans of liquid water on its surface, and, of ... of it in the oceans. About a fifth of its atmosphere is made up of oxygen, produced by plants.

The element used in the manufacture of safety matches is – (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Description : The element used in the manufacture of safety matches is – (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Last Answer : (1) Phosphorous Explanation: One end of a match is coated with a material that can be ignited by frictional heat generated by striking the match against a suitable surface. The coated end ... ," contains either phosphorus or phosphorus sesquisulfide as the active ingredient and gelatin as a binder.

Mendeleev proposed the existence of an unknown element that he called eka-aluminum. The element is now called: w) magnesium x) silicon y) gallium z) germanium

Description : Mendeleev proposed the existence of an unknown element that he called eka-aluminum. The element is now called: w) magnesium x) silicon y) gallium z) germanium

Last Answer : ANSWER: C -- GALLIUM

The element used for making solar cells is (1) Magnesium (2) Sodium (3) Calcium (4) Silicon

Description : The element used for making solar cells is (1) Magnesium (2) Sodium (3) Calcium (4) Silicon

Last Answer : Silicon

The element used in the manufacture of safety matches is (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Description : The element used in the manufacture of safety matches is (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Last Answer : Phosphorous

What is the element that is in the highest percentage in the composition of the earth ? (1) Silicon (2) Oxygen (3) Magnesium (4) Iron

Description : What is the element that is in the highest percentage in the composition of the earth ? (1) Silicon (2) Oxygen (3) Magnesium (4) Iron

Last Answer : Oxygen

Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Description : Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Last Answer : (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water

Alloying elements present in Haynes stellite, which has superior performance than high speed steel, are: (A) Nickel, cobalt & chromium (B) Tungsten, chromium & cobalt (C) Manganese, chromium & cobalt (D) Tungsten, molybdenum & nickel

Description : Alloying elements present in Haynes stellite, which has superior performance than high speed steel, are: (A) Nickel, cobalt & chromium (B) Tungsten, chromium & cobalt (C) Manganese, chromium & cobalt (D) Tungsten, molybdenum & nickel

Last Answer : Option B

The purpose of providing expansion bellows in the shell of tubular exchanger is to (A) Increase the heating load (B) Impart structural strength(C) Account for the uneven expansion of shell and tube bundles(D) Facilitate increase of shell length, if needed

Description : The purpose of providing expansion bellows in the shell of tubular exchanger is to (A) Increase the heating load (B) Impart structural strength (C) Account for the uneven expansion of shell and tube bundles (D) Facilitate increase of shell length, if needed

Last Answer : (C) Account for the uneven expansion of shell and tube bundles

Pick up the correct statement from the following: (A) Catalysts are added to assist and accelerate the hardening of resin (B) The fillers are inert materials and they impart strength and hardness (C) Fibrous fillers increase thermal resistance (D) All the above

Description : Pick up the correct statement from the following: (A) Catalysts are added to assist and accelerate the hardening of resin (B) The fillers are inert materials and they impart strength and hardness (C) Fibrous fillers increase thermal resistance (D) All the above

Last Answer : Answer: Option D

A flywheel is made of 1. cast iron 2. high strength steels 3. graphic fiber reinforced polymer 4. any one of the above materials

Description : A flywheel is made of 1. cast iron 2. high strength steels 3. graphic fiber reinforced polymer 4. any one of the above materials

Last Answer : 4. any one of the above materials

Flywheel are generally made from (A) Cast Iron (B) High strength steel (C) Ceramics (D) All of the above

Description : Flywheel are generally made from (A) Cast Iron (B) High strength steel (C) Ceramics (D) All of the above

Last Answer : (D) All of the above

Compared with Babbitt, bronze (A) Is cheaper (B) Has high strength (C) Can withstand high pressure (D) Has all three characteristics

Description : Compared with Babbitt, bronze (A) Is cheaper (B) Has high strength (C) Can withstand high pressure (D) Has all three characteristics

Last Answer : (D) Has all three characteristics

Lap welded joints used in circumferential joints because of ? i. High strength requirements ii. Low strength requirements iii. Low as well as high strength requirements

Description : Lap welded joints used in circumferential joints because of ? i. High strength requirements ii. Low strength requirements iii. Low as well as high strength requirements

Last Answer : ii. Low strength requirements

Why are butt welded joints longitudinal joints ? i. High strength requirements ii. Low strength requirements iii. Low as well as high strength requirements iv. None

Description : Why are butt welded joints longitudinal joints ? i. High strength requirements ii. Low strength requirements iii. Low as well as high strength requirements iv. None

Last Answer : i. High strength requirements

Threads used in screw fasteners are ______ a. having high strength b. having low efficiency c. single start type d. all of the above

Description : Threads used in screw fasteners are ______ a. having high strength b. having low efficiency c. single start type d. all of the above

Last Answer : d. all of the above

In the world, India tops in the production of – (1) Nickel (2) Uranium (3) Mica (4) Manganese

Description : In the world, India tops in the production of – (1) Nickel (2) Uranium (3) Mica (4) Manganese

Last Answer : (3) Mica Explanation: Mica is produced in huge proportion in India. In fact, India is one of the leading suppliers of mica to the world. India alone accounts fora major portion ... indispensable component of the electrical industry. India accounts for 60 % of mica embarking in international trade.

India has attained self-sufficiency in the production of – (1) Iron (2) Coal (3) Manganese (4) Nickel

Description : India has attained self-sufficiency in the production of – (1) Iron (2) Coal (3) Manganese (4) Nickel

Last Answer : (2) Coal Explanation: India has the 4th largest coal reserves in the world. Indian mineral industry has contributed significantly to make the nation self-sufficient in coal. To meet the ... other users, the production trends in coal and lignite sectors have shown a remarkable increasing trend.

Stainless steel is usually made by alloying the steel with – (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Description : Stainless steel is usually made by alloying the steel with – (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Last Answer : (3) chromium and nickel Explanation: In metallurgy, stainless steel is defined as a steel alloy with a minimum of 10.5 per cent to 11 per cent chromium content by mass. There are ... virtually nonmagnetic and less brittle at low temperatures. For greater hardness and strength, more carbon is added.

Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron

Description : Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron

Last Answer : (B) Manganese

Gun metal is an alloy of(A) Nickel, tin and copper(B) Copper, tin and zinc(C) Copper, phosphorus and nickel(D) Manganese, phosphorus and nickel

Description : Gun metal is an alloy of (A) Nickel, tin and copper (B) Copper, tin and zinc (C) Copper, phosphorus and nickel (D) Manganese, phosphorus and nickel

Last Answer : (B) Copper, tin and zinc

The steel used for rails under heavy traffic and on sharp curves, is (A) Nickel steel (B) Chrome steel (C) Manganese steel (D) Vanadium steel

Description : The steel used for rails under heavy traffic and on sharp curves, is (A) Nickel steel (B) Chrome steel (C) Manganese steel (D) Vanadium steel

Last Answer : Answer: Option C

Manganin is an alloy of (A) copper, manganese and nickel. (B) copper and manganese. (C) manganese and nickel. (D) manganese, aluminium and nickel.

Description : Manganin is an alloy of (A) copper, manganese and nickel. (B) copper and manganese. (C) manganese and nickel. (D) manganese, aluminium and nickel.

Last Answer : (A) copper, manganese and nickel.

Give the chemical composition forstainlesssteel, Tungsten steel, Nickel and Manganese steel.

Description : Give the chemical composition forstainlesssteel, Tungsten steel, Nickel and Manganese steel.

Last Answer : Chemical composition of: 1.Stainless steel: Min 12 % chromium 12 to 30 % Cr 4 to 25 % Ni 2.Tungsten steel: 18 % Tungsten (W) 4 % Cr 1 % vanadium 0.7 % carbon Small amount of Si , S , P ,Mn , Fe. 3. ... 4.Manganese steel: (e.g. C-Mn steel) 0.15 % C 1.4 % Mn 0.218 % Si 0.007 % S

Which of the following metals is obtained from its most common ore using an electrolytic process? w) nickel x) tin y) aluminum z) manganese

Description : Which of the following metals is obtained from its most common ore using an electrolytic process? w) nickel x) tin y) aluminum z) manganese

Last Answer : ANSWER: Y -- ALUMINUM

Stainless steel is usually made by alloying the steel with (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Description : Stainless steel is usually made by alloying the steel with (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Last Answer : chromium and nickel 

Which of the following exercises most powerful influence on the mechanical properties of steel? (A) Manganese (B) Carbon (C) Phosphorous (D) Silicon

Description : Which of the following exercises most powerful influence on the mechanical properties of steel? (A) Manganese (B) Carbon (C) Phosphorous (D) Silicon

Last Answer : (B) Carbon

__________ is added in low carbon steel to raise its yield point. (A) Sulphur (B) Phosphorous (C) Silicon (D) Manganese

Description : __________ is added in low carbon steel to raise its yield point. (A) Sulphur (B) Phosphorous (C) Silicon (D) Manganese

Last Answer : (D) Manganese

Iron ore may contain (A) Carbon (B) Silicon (C) Phosphorus and manganese (D) All the above

Description : Iron ore may contain (A) Carbon (B) Silicon (C) Phosphorus and manganese (D) All the above

Last Answer : Answer: Option D

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

__________ steel is widely used for the manufacture of motor car crankshafts. (A) Silicon (B) Nickel (C) Chrome (D) High speed

Description : __________ steel is widely used for the manufacture of motor car crankshafts. (A) Silicon (B) Nickel (C) Chrome (D) High speed

Last Answer : (C) Chrome

Which of the following has a very high carbide forming tendency in steels? (A) Silicon (B) Chromium (C) Nickel (D) Vanadium

Description : Which of the following has a very high carbide forming tendency in steels? (A) Silicon (B) Chromium (C) Nickel (D) Vanadium

Last Answer : (D) Vanadium

Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Description : Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Last Answer : (A) Stainless steel or glass lined steel