Description : Hot rolling produces a stronger shaft then cold rolling. a) True b) False
Last Answer : b) False
Description : Which one of the following parts of a ball bearing is mounted on the rotating shafts and tends to rotate the shaft? (a) Inner race (b) Outer race (c) Rolling element (d) Cage
Last Answer : (a) Inner race
Description : The rolling contact bearings as compared to sliding contact bearings have (a) small overall dimensions (b) accuracy of shaft alignment (c) low starting and low running friction except at very high speeds (d) all the mentioned
Last Answer : (d) all the mentioned
Description : In cold riveting like hot riveting shank is subjected to majorly tensile stress. a) True b) False
Description : Cold riveting holds the connected parts better than hot riveting. a) True b) False
Description : . In gear boxes and small size motors, rolling contact bearings are used. a) True b) False
Last Answer : a) True
Description : In steam and gas turbines, rolling contact bearings are used. a) True b) False
Description : Assertion (A): In anti-friction bearings, the frictional resistance is very low as the shaft held by it remains in floating condition by the hydrodynamic pressure developed by the lubricant. [IES-2006] Reason (R): In hydrodynamic ... of A (c) A is true but R is false (d) A is false but R is true
Last Answer : (d) A is false but R is true
Description : A total permanent deformation of 0.0001 of the ball diameter is taken for considering static load capacity of the shaft. a) True b) False
Description : A radial bearing supports the load that acts along the axis of the shaft. a) True b) False
Description : The hub is treated as a solid shaft while calculating torsional shear stress in the hub. a) True b) False
Description : Solid shaft is costlier than hollow shaft of same weight. a) True b) False
Description : The strength of hollow shaft is more than the strength of solid shaft of same weight. a) True b) False
Description : The stiffness of solid shaft is more than the stiffness of hollow shaft with same weight. a) True b) False
Description : Counter shaft is a secondary shaft. a) True b) False
Description : Shaft is rotating machine element. A. True B. False
Last Answer : A. True
Description : If a circular shaft is welded to the plate by means of circumferential fillet, then the shaft is subjected to torsional moment M. If throat of weld is t, then torsional shear stress is given by a) M/2πtr2 b) M/πtr2 c) M/4πtr2 d) None of the listed
Last Answer : a) M/2πtr2
Description : If shaft diameter is 30mm and number of pins emplaced are 6, then the diameter of the pin will be? a) 6.4mm b) 5.6mm c) 6.1mm d) 5.9mm
Last Answer : c) 6.1mm
Description : The bending moment ‘M’ and a torque ‘T’ is applied on a solid circular shaft. If the maximum bending stress equals to maximum shear stress developed, then ‘M’ is equal to (A) T/2 (B) T (C) 2 T (D) 4 T
Last Answer : (A) T/2
Description : Which of the following are not true for petroff’s equation? a) Shaft is considered concentric with the bearing b) Bearing is subjected to light load c) Is used to find coefficient of friction d) Frictional torque is given by fpr2l
Last Answer : d) Frictional torque is given by fpr2l
Description : Out of the followings, which welded joint is more stronger (i) Butt joint (ii) Lap joint (iii)Screwed joint
Last Answer : (i) Butt joint
Description : The objective of caulking in a riveted joint is to make the joint (A) Free from corrosion (B) Stronger in tension (C) Free from stress (D) Leak-proof
Last Answer : (D) Leak-proof
Description : Hard peening is a) Hammering the weld across the length while the joint is hot b) Hammering the weld along the length while the joint is hot c) Hammering the weld along the length while the joint is cold d) Hammering the weld across the length while the joint is cold
Last Answer : b) Hammering the weld along the length while the joint is hot
Description : _______is suitable as a lubricant for heavy-duty applications of rolling contact bearing. (a) Grease (b) Lubricating oil (c) Graphite (d) Air
Last Answer : (b) Lubricating oil
Description : ________is suitable as a lubricant for low and moderate loads applications of rolling contact bearing. (a) Grease (b) Lubricating oil (c) Graphite (d) Air
Last Answer : (a) Grease
Description : An antifriction bearing consists of (a) rolling elements (b) races (c) cages (d) all of the listed
Last Answer : (d) all of the listed
Description : Which one of the following parts of a ball bearing acts as a barrier between the balls preventing them from bumping into each other? (a) Inner race (b) Outer race (c) Rolling element (d) Cage
Last Answer : (d) Cage
Description : Which one of the following parts of a ball bearing is mounted to the housing and is stationary? (a) Inner race (b) Outer race (c) Rolling element (d) Cage
Last Answer : (b) Outer race
Description : A rolling contact bearing is specified as X307. Calculate the bearing diameter. (a) 35 mm (b) 28 mm (c) 21 mm (d) 7 mm
Last Answer : (a) 35 mm
Description : Which bearing is Antifriction bearing A. Thick lubrication bearing B. Thin lubrication bearing C. Rolling or ball bearing D. None
Last Answer : C. Rolling or ball bearing
Description : Rolling contact bearing is also called as A. Plastic bearing B. Thin lubrication bearing C. Thick lubrication bearing D. Antifriction bearing.
Last Answer : D. Antifriction bearing.
Description : The listed life of a rolling bearing, in a catalog is the, (a) minimum expected life (b) maximum expected life (c) average life (d) none of the mentioned
Last Answer : (a) minimum expected life
Description : The rolling contact bearings are known as (a) thick lubricated bearings (b) plastic bearings (c) thin lubricated bearings (d) antifriction bearings
Last Answer : (d) antifriction bearings
Description : A journal bearing is a ______ contact bearing working on the hydrodynamic lubrication and which supports load in____ direction. a) Sliding, Axial b) Rolling, Radial c) Sliding, Radial d) Rolling, Axial
Last Answer : c) Sliding, Radial
Description : A rolling contact bearing is specified as X307. Determine the series. a) Extra light series b) Light series c) Medium series d) Heavy series
Last Answer : c) Medium series
Description : Taper rolling supports a) Axial loads b) Thrust loads c) Both axial and thrust loads d) None of the mentioned
Last Answer : c) Both axial and thrust loads
Description : The ability of a material to be formed by hammering or rolling is known as _________ a) Malleability b) Ductility c) Harness d) Brittleness
Last Answer : a) Malleability
Description : In vehicle flywheel is place between 1. clutch and propeller shaft 2. engine and clutch 3. before engine 4. propeller shaft and differential
Last Answer : 2. engine and clutch
Description : The hub diameter of the flywheel is taken as 1. 2.5(shaft diameter) 2. 1.5(shaft diameter) 3. 4(shaft diameter) 4. 2(shaft diameter)
Last Answer : 4. 2(shaft diameter)
Description : In vehicles, flywheel is placed in between (A) Engine and clutch (B) Clutch and Propeller shaft (C) Propeller shaft and Differential (D) Before engine
Last Answer : (A) Engine and clutch
Description : The hub diameter of the flywheel is taken as, (A) 2.5 (shaft diameter) (B) 1.5 (shaft diameter) (C) 4 (shaft diameter) (D) 2 (shaft diameter)
Last Answer : (D) 2 (shaft diameter)
Description : The ball bearing is subjected to a radial load of 4000 N. Expected life for 90% bearings is 9000 hr and the shaft is rot (a) 42.21 kN (b) 37.29 kN (c) 26.33 kN (d) 35.22 kN
Last Answer : (b) 37.29 kN
Description : Calculate the bearing life if expected life for 90% bearings is 9000 hr and the shaft is rotating at 1500 rpm. (a) 850 million rev (b) 810 million rev (c) 810 hr (d) 850 hr
Last Answer : (b) 810 million rev
Description : The static load is defined as the load acting on the bearing when the shaft is _____. (a) stationary (b) rotating at rpm
Last Answer : (a) stationary
Description : Consider the following pairs of types of bearings and applications: 1. Partial Journal bearing................... Rail wagon axles 2. Full journal bearing ......................Diesel engine crank-shaft 3. Radial bearing ... matched? [IES-2000] (a) 1 alone (b) 1 and 2 (c) 2 and 3 (d) 1, 2 and 3
Last Answer : (b) 1 and 2