Description : The stiffness of solid shaft is more than the stiffness of hollow shaft with same weight. a) True b) False
Last Answer : b) False
Description : The strength of hollow shaft is more than the strength of solid shaft of same weight. a) True b) False
Last Answer : a) True
Description : Solid shaft is costlier than hollow shaft of same weight. a) True b) False
Description : The stiffness of solid shaft is---------- than the stiffness of hollow shaft with same weight. a) less b) more c) equal d) not equal
Last Answer : b) more
Description : Muff coupling is designed as a ......... A. Thick cylinder B. Thin cylinder C. Solid shaft D. Hollow shaft
Last Answer : D. Hollow shaft
Description : The hub is treated as a solid shaft while calculating torsional shear stress in the hub. a) True b) False
Description : The strength of hollow shaft is more than the strength of solid shaft of ---------weight. a) same b) different c) equal d) not equa
Last Answer : a) same
Description : For same length, same material, same length a. Weight of solid shaft is less than weight of hollow shaft b. Weight of solid shaft is more than weight of hollow shaft c. Weight of hollow and solid shafts will be same d. Sometime more sometime less
Last Answer : b. Weight of solid shaft is more than weight of hollow shaft
Description : The strength of a hollow shaft for the same length, material and weight is ---------- a solid shaft. a. less than. b. more than. c. equal to. d. not equal to.
Last Answer : b. more than.
Description : Solid shaft is ----------than hollow shaft of same weight. a) cheaper b) costlier c) not costlier d) not cheaper
Last Answer : b) costlier
Description : For same weight, same material, same length a. Solid shaft is always stronger than a hollow shaft b. Solid shaft is always weaker than a hollow shaft and strength ratio will depend upon Do/Di of ... of a solid shaft is always weaker and the strength ratio will depend upon Do/Di of hollow shaft
Last Answer : b. Solid shaft is always weaker than a hollow shaft and strength ratio will depend upon Do/Di of hollow shaft
Description : The strength of a hollow shaft is ……… for the same length, material and weight of a solid shaft. (a) More (b) Less (c) Equal (d) None of these
Last Answer : (b) Less
Description : A spring of stiffness constant k is cut in two equal parts. The stiffness constant of new spring will be k/2. a) True b) False
Description : If n is the ratio of internal and external diameters of a hollow shaft, the ratio of the weight of the hollow shaft and that of solid shaft of same strength, will be (A) (1 - n²)/(1 - n²)1/2 (B) (1 - n²)/(1 - n 4 ... (1 + n 4 )1/2 (D) (1 + n 1 )/(1 + n 4 )2/3
Last Answer : (B) (1 - n²)/(1 - n 4 )2/3
Description : Hollow saddle key is superior to flat saddle key as far as power transmitting capability is concerned. a) True b) False
Description : For the same material, length and given torque, a hollow shaft weighs……………… a solid shaft. (a) Less than (b) More than (c) Equal to (d) None of these
Last Answer : (a) Less than
Description : Assertion (A): In anti-friction bearings, the frictional resistance is very low as the shaft held by it remains in floating condition by the hydrodynamic pressure developed by the lubricant. [IES-2006] Reason (R): In hydrodynamic ... of A (c) A is true but R is false (d) A is false but R is true
Last Answer : (d) A is false but R is true
Description : A total permanent deformation of 0.0001 of the ball diameter is taken for considering static load capacity of the shaft. a) True b) False
Description : A radial bearing supports the load that acts along the axis of the shaft. a) True b) False
Description : Hot rolling produces a stronger shaft then cold rolling. a) True b) False
Description : Counter shaft is a secondary shaft. a) True b) False
Description : Shaft is rotating machine element. A. True B. False
Last Answer : A. True
Description : A solid shaft of same cross sectional area and of same material as that of a hollow shaft can resist a. Less torque. b. More torque. c. Equal torque. d. Unequal torque.
Last Answer : a. Less torque.
Description : The strain energy will be higher in which shaft under the same torque (a) Solid shaft (b) Hollow shaft (c) Same in Solid as well as hollow shaft (d) None
Last Answer : (b) Hollow shaft
Description : The ratio of strength of a hollow shaft to that of a solid shaft subjected to torsion if both are of the same material and of the same outer diameters, the inner diameter of hollow shaft being half of the outer diameter is a. 15/16 b. 16/15 c. 7/8 d. 8/7
Last Answer : a. 15/16
Description : The bending moment ‘M’ and a torque ‘T’ is applied on a solid circular shaft. If the maximum bending stress equals to maximum shear stress developed, then ‘M’ is equal to (A) T/2 (B) T (C) 2 T (D) 4 T
Last Answer : (A) T/2
Description : Compressed length is smaller than the solid length. a) True b) False
Description : When a helical spring is cut into two halves, the stiffness of each half spring will be, (A) Same as original spring (B) Double of original spring (C) Half of original spring (D) One fourth of original spring
Last Answer : (B) Double of original spring
Description : Solid shafts are used in epicyclic gearboxes. a) True b) False
Description : The ratio of the moments of resistance of a solid circular shaft of diameter D and a hollow shaft (external diameter D and internal diameter d), is (A) D 4 /(D 4 - d 4 ) (B) D 3 /(D 3 - d 3 ) (C) (D 4 - d 4 )/D 4 (D) (D 3 - d 3 )/D 3
Last Answer : (A) D 4 /(D 4 - d 4 )
Description : From strength point of view, whether hollow or solid shaft will be preferable (a) Solid shaft (b) Hollow shaft (c) Both solid as well as hollow shaft (d) None
Last Answer : b) Hollow shaft
Description : For a solid or a hollow shaft subject to a twisting moment T, the torsional shearing stress t at a distance r from the centre will be (a) t = Tr/J (b) t = Tr (c) t = TJ/r (d) none of these
Last Answer : (a) t = Tr/J
Description : Which of the following is incorrect? a. In a solid shaft maximum shear stress occurs at radius = radius of shaft b. In a solid shaft maximum shear stress occurs at center c. In a hollow ... maximum shear stress occurs at outer radius d. In a hollow shaft minimum shear stress occurs at inner radius
Last Answer : b. In a solid shaft maximum shear stress occurs at center
Description : Which of the following is measure of stiffness? a) Modulus of elasticity b) Modulus of plasticity c) Resilience d) Toughness
Last Answer : a) Modulus of elasticity
Description : For two springs in parallel, effective stiffness (k) is Where k 1 & k 2 are stiffness of springs 1 & 2 respectively (A) k 1 k 2 / (k 1 + k 2 ) (B) k 1 + k 2 (C) k 1 k 2 (D) (k 1 + k 2 ) / k 1 k 2
Last Answer : (B) k 1 + k 2
Description : For two springs in series, effective stiffness (k) is Where k 1 & k 2 are stiffness of springs 1 & 2 respectively (A) k 1 k 2 / (k 1 + k 2 ) (B) k 1 + k 2 (C) k 1 k 2 (D) (k 1 + k 2 ) / k 1 k 2
Last Answer : (A) k 1 k 2 / (k 1 + k 2 )
Description : The force required to produce unit deflection is known as (A) gradient of spring (B) stiffness of the spring (C) spring constant (D) all of the above
Last Answer : (D) all of the above
Description : Two springs of stiffness k1 and k2 are connected in series, the combined (A) k1k2/k1 + k2 (B) k1k2/k1 - k2 (C) k1 + k2 (D) k1 + k2/k1k2
Last Answer : (A) k1k2/k1 + k2
Description : Two springs of stiffness k1 and k2 are connected in parallel, the combined stiffness of the connection is given by, (A) k1k2/k1 + k2 (B) k1k2/k1 - k2 (C) k1 + k2 (D) k1 + k2/k1k2
Last Answer : (C) k1 + k2
Description : The stiffness of spring is, (A) Deflection per unit of axial force (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection
Last Answer : (D) Force required to produce unit deflection
Description : The resultant axial force on bolt depends upon (A) Initial tension (B) External applied load (C) Stiffness of bolt and parts held by bolt (D) All three factors
Last Answer : (D) All three factors
Description : Which of the following property is essential for spring materials? (A) Stiffness (B) Ductility (C) Resilience (D) Plasticity
Last Answer : (C) Resilience
Description : Which of the following are not true for petroff’s equation? a) Shaft is considered concentric with the bearing b) Bearing is subjected to light load c) Is used to find coefficient of friction d) Frictional torque is given by fpr2l
Last Answer : d) Frictional torque is given by fpr2l