What's the function of a band pass filter

by

1 Answer

Answer :

Passes a certain range of frequency.
by

Related questions

What consists the front-end circuit of a VHF TV superheterodyne receiver? A. Mixer, RF amplifier and AFC? B. RF amplifier, Band pass filter and mixer C. Local oscillator, mixer and RF amplifier D. Local oscillator, AGC and antenna

Description : What consists the front-end circuit of a VHF TV superheterodyne receiver? A. Mixer, RF amplifier and AFC? B. RF amplifier, Band pass filter and mixer C. Local oscillator, mixer and RF amplifier D. Local oscillator, AGC and antenna

Last Answer : C. Local oscillator, mixer and RF amplifier

How can intermodulation interference between two transmitters in close proximity reduced or eliminated? A. Through installing a band-pass filter in the antenna feed line B. Through installing terminated circulator or ferrite isolator in the feed line of the transmitter and duplexer C. By using a class C final amplifier with high driving power D. By installing a low-pass filter in the antenna feed line

Description : How can intermodulation interference between two transmitters in close proximity reduced or eliminated? A. Through installing a band-pass filter in the antenna feed line B. Through installing terminated circulator ... high driving power D. By installing a low-pass filter in the antenna feed line

Last Answer : A. Through installing a band-pass filter in the antenna feed line

Which of the following filters block FM radio band for TV channels (2 to 13)? A. High-pass filter B. Band reject filter C. Low-pass filter D. Band-pass filter

Description : Which of the following filters block FM radio band for TV channels (2 to 13)? A. High-pass filter B. Band reject filter C. Low-pass filter D. Band-pass filter

Last Answer : B. Band reject filter

The ___________ filter attenuates signals but passes frequencies below and above that band. A. low pass B. band pass C. band stop D. high pass

Description : The ___________ filter attenuates signals but passes frequencies below and above that band. A. low pass B. band pass C. band stop D. high pass

Last Answer : C. band stop

What type filter is used to allow a narrow band of frequencies to pass through a circuit and attenuate all other frequencies above or below the desired band?

Description : What type filter is used to allow a narrow band of frequencies to pass through a circuit and attenuate all other frequencies above or below the desired band?

Last Answer : Bandpass.

What do you mean by active filter? State its advantages over passive filter . Define pass band & stop band with respect to filter.

Description : What do you mean by active filter? State its advantages over passive filter . Define pass band & stop band with respect to filter.

Last Answer : Active Filter: Active Filter is formed by using active element along with the passive components.  Advantages of Active filter over Passive filter: High value of pass band gain can be obtained. It is ... pass band.  Stop Band Filter: The frequency range which is attenuated is known as stop band.

A band pass filter is that which

Description : A band pass filter is that which

Last Answer : A band pass filter is that which passes signals between two frequency limits

i. (X’+Y’) A. Low-pass filter function ii. (X’Y’) B. Sum iii. (XY) C. NAND D. Carry E.NOR a) i-C, ii-E, iii-D b) i-C, ii-E, iii-B c) i-C, ii-B, iii-D d) i-C, ii-E, iii-A

Description : i. (X’+Y’) A. Low-pass filter function ii. (X’Y’) B. Sum iii. (XY) C. NAND D. Carry E.NOR a) i-C, ii-E, iii-D b) i-C, ii-E, iii-B c) i-C, ii-B, iii-D d) i-C, ii-E, iii-A

Last Answer : Ans: i-C, ii-E, iii-D

low pass &band pass filter in detail

Last Answer : A low pass filter is a filter that only allows certain frequencies to be allowed through the filter. The low in low pass refers to it allowing frequencies below a certain cut off ... cutoff frequency to pass through effectively creating a band of frequency values that are allowed through. 

A high pass filter has a resistance R = 2 kΩ. The lowest input frequency to...

Description : A high pass filter has a resistance R = 2 kΩ. The lowest input frequency to be passed is 7.5 KHz. The value of suitable coupling capacitor must be : (A) 0.1 pF (B) 1 pF (C) 0.1 μ F (D) 1 μ F

Last Answer : Option C By equating 1/RC with frequency.

What type filter is used to block the passage of current for a narrow band of frequencies, while allowing current to flow at all frequencies above or below this band?

Description : What type filter is used to block the passage of current for a narrow band of frequencies, while allowing current to flow at all frequencies above or below this band?

Last Answer : . Band-reject.

What method can be used to separate parts of a liquid mixture if the entire mixture can pass through a filter?

Description : What method can be used to separate parts of a liquid mixture if the entire mixture can pass through a filter?

Last Answer : YOu

Harmonic suppressor connected to an antenna. A. Low-pass filter B. High-pass filter C. M-derived filter D. Constant-K

Description : Harmonic suppressor connected to an antenna. A. Low-pass filter B. High-pass filter C. M-derived filter D. Constant-K

Last Answer : A. Low-pass filter

Harmonic suppressor connected to an antenna. A. High pass filter B. Low pass filter C. Tank circuit D. M-derived filter

Description : Harmonic suppressor connected to an antenna. A. High pass filter B. Low pass filter C. Tank circuit D. M-derived filter

Last Answer : B. Low pass filter

What is the purpose of having a low pass filter in PLL?

Description : What is the purpose of having a low pass filter in PLL?

Last Answer : *It removes the high frequency components and noise. *Controls the dynamic characteristics of the PLL such as capture range, lock-in range,band-width and transient response. *The charge on the filter capacitor gives a short- time memory to the PLL

Define High pass filter.

Description : Define High pass filter.

Last Answer : A low pass filter allows only high frequency signals upto a certain break point fH to pass through

Define low pass filter.

Description : Define low pass filter.

Last Answer : A low pass filter allows only low frequency signals upto a certain break point fH to pass through.

How does a low-pass filter detect pdm?

Description : How does a low-pass filter detect pdm?

Last Answer : By averaging the value of the pulses over the period of the pulse-repetition rate.

In a certain electronic circuit the output is positive if input 1 is positive and input 2 is zero. If both inputs are positive the output is zero. This is: w) an AND circuit x) a NOR circuit y) an OR circuit z) a high-pass filter

Description : In a certain electronic circuit the output is positive if input 1 is positive and input 2 is zero. If both inputs are positive the output is zero. This is: w) an AND circuit x) a NOR circuit y) an OR circuit z) a high-pass filter

Last Answer : ANSWER: Y -- AN OR CIRCUIT

The shunt element of prototype high pass filter is _____.

Description : The shunt element of prototype high pass filter is _____. 

Last Answer : The shunt element of prototype high pass filter is inductive. 

For a prototype low pass filter, the series and shunt elements are respectively _____.

Description : For a prototype low pass filter, the series and shunt elements are respectively _____.

Last Answer :  For a prototype low pass filter, the series and shunt elements are respectively inductive and capacitive.

A low-pass filter with a cut-off frequency of 30 Hz is cascaded with a high pass filter with a cut-off frequency

Description : A low-pass filter with a cut-off frequency of 30 Hz is cascaded with a high pass filter with a cut-off frequency of 20 Hz. The resultant system of filters will function as  (A) an all – pass filter (B) an all – stop filter (C) an band stop (band-reject) filter (D) a band – pass filter

Last Answer : A low-pass filter with a cut-off frequency of 30 Hz is cascaded with a high pass filter with a cut-off frequency of 20 Hz. The resultant system of filters will function as  a band – pass filter

The values of L and C for a low pass filter with cut off frequency of 2.5 KHz and operating with a terminated

Description : The values of L and C for a low pass filter with cut off frequency of 2.5 KHz and operating with a terminated load resistance of 450 Ohm are given by  (a) 57.3 mH; 0.283 μF (b) 28.66 μH; 0.14 μF (c) 114.64 mH; 0.566 mF (d) 50.23 mH; 0.632 mF

Last Answer : The values of L and C for a low pass filter with cut off frequency of 2.5 KHz and operating with a terminated load resistance of 450 Ohm are given by 57.3 mH; 0.283 μF

Low pass filter with cut off frequency of 100 kHz and high pass filter with cut off frequency of

Description : Low pass filter with cut off frequency of 100 kHz and high pass filter with cut off frequency of 50 kHz are connected in tandem, the resultant filter is Low pass filter with cut off frequency of 100 kHz ... kHz Band pass filter with pass band from 50 kHz to 100 kHz. None of the above.

Last Answer : Low pass filter with cut off frequency of 100 kHz and high pass filter with cut off frequency of 50 kHz are connected in tandem, the resultant filter is Band pass filter with pass band from 50 kHz to 100 kHz.

When measuring strain, ballast circuit use a capacitor to act as a high pass filter. This is done when:

Description : When measuring strain, ballast circuit use a capacitor to act as a high pass filter. This is done when:  a) Static strain are being measured b) Dynamic strain are being measured c) Both Static and dynamic strain are being measured d) None of the above

Last Answer : When measuring strain, ballast circuit use a capacitor to act as a high pass filter. This is done when: Dynamic strain are being measured

write short notes on Low-pass filter.

Description : write short notes on Low-pass filter.

Last Answer : low-pass filter (1) filter exhibiting frequency selective characteristic that allows low-frequency components of an input signal to pass from filter input to output unattenuated all high-frequency components are ... the bandwidth of the filter. A filter whose impulse response is a low-pass signal.

Analog-to-analog conversionis needed if the available bandwidthis _______. A) low-pass B) band-pass C) either (a)or (b) D) neither (a) nor (b)

Description : Analog-to-analog conversionis needed if the available bandwidthis _______. A) low-pass B) band-pass C) either (a)or (b) D) neither (a) nor (b)

Last Answer : band-pass

What is the function of an electrical filter ?

Description : What is the function of an electrical filter ?

Last Answer : Filter separates different components that are mixed together. Electrical filter can separate different frequency components. Electrical filters are the electrical circuits which are use to remove unwanted frequency components from the signal.

Sketch circuit diagram of bridge rectifier with LC filter. State function of each component.

Description : Sketch circuit diagram of bridge rectifier with LC filter. State function of each component.

Last Answer :  Circuit diagram :  Components and its function: :  1. Transformer- An electrical device which transfers electrical energy from one electric circuit to other, without changing the frequency. The ... DC components.  4. Capacitor- It bypasses AC components if any and gives DC to load. 

What is the function of an air filter on a vehicle?

Description : What is the function of an air filter on a vehicle?

Last Answer : For the engine. Imagine dust getting inside the cylinders and scratching the crap out of everything. Without one your oil would look like mud in a month.

The function of a rectifier is similar to that of a _______. A. trap B. regulating valve C. check valve D. filter

Description : The function of a rectifier is similar to that of a _______. A. trap B. regulating valve C. check valve D. filter

Last Answer : Answer: C

which one of the following is not a function of Artificial Kidney? (a) To remove nitrogenous wastes from the blood. (b) To remove excess fluids from the blood. (c) To reabsorb essential nutrients from the blood. (d) To filter and purify the blood.

Description : which one of the following is not a function of Artificial Kidney? (a) To remove nitrogenous wastes from the blood. (b) To remove excess fluids from the blood. (c) To reabsorb essential nutrients from the blood. (d) To filter and purify the blood.

Last Answer : (c) To reabsorb essential nutrients from the blood.

One of the main function of the earth’s ozone layer is to ? A. Prevent global warming B. Filter out ultraviolet rays (Answer) C. Absorb pollution D. All of the above

Description : One of the main function of the earth’s ozone layer is to ? A. Prevent global warming B. Filter out ultraviolet rays (Answer) C. Absorb pollution D. All of the above

Last Answer : B. Filter out ultraviolet rays (Answer)

What is the function of a crystal filter in a receiver?

Description : What is the function of a crystal filter in a receiver?

Last Answer : It is used to achieve maximum selectivity.

List the function of air filter

Description : List the function of air filter

Last Answer : function of air filter:  1. Filters are used to remove foreign particles like dirt, dust and grit or filters are used to remove dust and particles out of the air. 2. It may also ... the lubrication system. It is therefore customary to install air filter on the intake system of automobile engines. 

Write the function of C and L in π filter and write two advantages of π filter over other filters.

Description : Write the function of C and L in π filter and write two advantages of π filter over other filters.

Last Answer : The capacitors C1 and C2 provide a low reactance path for the ripple whereas the series inductor L provides a high reactance to the ac ripple. The combined effect of this is the reduction in ripple, and ... very low. 4. High dc voltage (approximately Vm) 5. Increase in the average load voltage. 

An artificial neurons receives n inputs x1, x2,...,xn with weights w1,w2,...,wn attached to the input links. The weighted sum ............... is computed to be passed on to a non-linear filter ϕ called activation function to release the output. (A) Σ wi (B) Σ xi (C) Σ wi + Σ xi (D) Σ wi . Σ xi

Description : An artificial neurons receives n inputs x1, x2,...,xn with weights w1,w2,...,wn attached to the input links. The weighted sum ............... is computed to be passed on to a non-linear filter ϕ called activation function to release the output. (A) Σ wi (B) Σ xi (C) Σ wi + Σ xi (D) Σ wi . Σ xi

Last Answer : (D) Σ wi . Σ xi

The primary function of a filter is to : -

Description : The primary function of a filter is to : -  a) minimize input variations b) suppness odd harmonics in the rectifier output c) stabalise DC level of o/p voltage d) remove ripples from rectified output

Last Answer : The primary function of a filter is to : - remove ripples from rectified output