A glass chimney stops an oil lamp from smoking because: A. It increases the supply of oxygen to the flame by convection B. The heat produced ensures complete C. Both to these (Answer) D. Neither of these

A glass chimney stops an oil lamp from smoking because:

A. It increases the supply of oxygen to the flame by convection

B. The heat produced ensures complete

C. Both to these (Answer)

D. Neither of these
by

1 Answer

Answer :

C. Both to these (Answer)
by

Related questions

Actual flame temperature is always lower than the adiabatic flame temperature, because there is (A) No possibility of obtaining complete combustion at high temperature (B) Always loss of heat from the flame (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Actual flame temperature is always lower than the adiabatic flame temperature, because there is (A) No possibility of obtaining complete combustion at high temperature (B) Always loss of heat from the flame (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Smoke point of kerosene is the (A) Time after which smoking starts on burning (B) Temperature at which smoking starts (C) Maximum height of flame (in mm) without causing smoking, when burnt in a standard lamp (D) None of these

Description : Smoke point of kerosene is the (A) Time after which smoking starts on burning (B) Temperature at which smoking starts (C) Maximum height of flame (in mm) without causing smoking, when burnt in a standard lamp (D) None of these

Last Answer : (B) Temperature at which smoking starts

Natural draught produced by a chimney depends upon the (A) Density of the chimney gases (B) Height of the chimney (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Natural draught produced by a chimney depends upon the (A) Density of the chimney gases (B) Height of the chimney (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

If the flame of a miner’s safety lamp in a manhole extinguishes within 5 minutes, the sewer certainly contains A. Hydrogen sulphide B. Carbon dioxide C. Methane D. Oxygen

Description : If the flame of a miner’s safety lamp in a manhole extinguishes within 5 minutes, the sewer certainly contains A. Hydrogen sulphide B. Carbon dioxide C. Methane D. Oxygen

Last Answer : ANS: B

If the flame of a miner’s safety lamp in the upper layers of the sewer forms an explosive, the sewer certainly contains A. Hydrogen sulphide B. Carbon dioxide C. Methane D. Oxygen

Description : If the flame of a miner’s safety lamp in the upper layers of the sewer forms an explosive, the sewer certainly contains A. Hydrogen sulphide B. Carbon dioxide C. Methane D. Oxygen

Last Answer : ANS: C

Nusselt number (for forced convection heat transfer) is a function of the __________ number. (A) Prandtl (B) Reynolds (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Nusselt number (for forced convection heat transfer) is a function of the __________ number. (A) Prandtl (B) Reynolds (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Heat flux increases with temperature drop beyond the Leiden frost point in the plot of heat flux vs. temperature drop for a boiling liquid, because (A) Convection becomes important (B) Conduction becomes important (C) Radiation becomes important (D) Sub-cooled boiling occurs

Description : Heat flux increases with temperature drop beyond the Leiden frost point in the plot of heat flux vs. temperature drop for a boiling liquid, because (A) Convection becomes important (B) Conduction becomes important (C) Radiation becomes important (D) Sub-cooled boiling occurs

Last Answer : (C) Radiation becomes important

Which of the following concurrency protocol ensures both conflict serializability and freedom from deadlock : I. 2-phase locking II. Time phase ordering (A) Both I & II (B) II only (C) I only (D) Neither I nor II

Description : Which of the following concurrency protocol ensures both conflict serializability and freedom from deadlock : I. 2-phase locking II. Time phase ordering (A) Both I & II (B) II only (C) I only (D) Neither I nor II

Last Answer : (B) II only

Which of the following concurrency protocol ensures both conflict serializability and freedom from deadlock ? (a) 2-phase Locking (b) Time stamp - ordering (A) Both (a) and (b) (B) (a) only (C) (b) only (D) Neither (a) nor (b)

Description : Which of the following concurrency protocol ensures both conflict serializability and freedom from deadlock ? (a) 2-phase Locking (b) Time stamp - ordering (A) Both (a) and (b) (B) (a) only (C) (b) only (D) Neither (a) nor (b)

Last Answer : (C) (b) only

Which of the following statement(s) is/are TRUE with regard to software testing? I. Regression testing technique ensures that the software product runs correctly after the changes during maintenance. II. Equivalence partitioning is a white-box testing technique that divides the input domain of a program into classes of data from which test cases can be derived. (1) only I (2) only II (3) both I and II (4) neither I nor II

Description : Which of the following statement(s) is/are TRUE with regard to software testing? I. Regression testing technique ensures that the software product runs correctly after the changes during maintenance. II. Equivalence partitioning is a ... (1) only I (2) only II (3) both I and II (4) neither I nor II

Last Answer : (1) only I 

During combustion of a gaseous fuel, the presence of a non-luminous flame is an indication of the (A) Incomplete combustion (B) Complete combustion (C) High oxygen in flue gas (D) None of these

Description : During combustion of a gaseous fuel, the presence of a non-luminous flame is an indication of the (A) Incomplete combustion (B) Complete combustion (C) High oxygen in flue gas (D) None of these

Last Answer : (B) Complete combustion

Natural draft created by the chimney depends upon (A) Temperature of the flue gas (B) Its height (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Natural draft created by the chimney depends upon (A) Temperature of the flue gas (B) Its height (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

By what process is heat transmitted from the filament of an evacuated electric bulb to the glass? (a) Conduction (b) Convection (c) Radiation (d) Heat cannot be transmitted through vacuum

Description : By what process is heat transmitted from the filament of an evacuated electric bulb to the glass? (a) Conduction (b) Convection (c) Radiation (d) Heat cannot be transmitted through vacuum

Last Answer : Ans:(c)

What are dangers for smoking around an oxygen supply?

Description : What are dangers for smoking around an oxygen supply?

Last Answer : Oxygen is extremely flammable, especially when it is concentrated. Smoking around an oxygen supply is extremely dangerous. One small spark or even fumes from the lighter could ignite the oxygen supply almost instantaneously.

Do you have an idea why my VW Jetta 1.8 L Turbo car blows out a cloud of blue smoke whenever I take a sharp corner or on-ramp? It lasts about 10 seconds, then stops smoking!

Description : Do you have an idea why my VW Jetta 1.8 L Turbo car blows out a cloud of blue smoke whenever I take a sharp corner or on-ramp? It lasts about 10 seconds, then stops smoking!

Last Answer : If the oil cap is not missing or loose I would venture to guess you have a bad seal. Can you see the source? Is it dripping when parked? Oil seals really require a mechanic to properly fix. (Unless you have a good torque wrench and do not mind getting really dirty.)

When a teacher ensures that students complete an exercise in mathematics and makes sure instructions are clear and specific. The teacher ensures the ........ aspect of assessment Options: A) A Validity B) Practicality C) Reliability D) Wash-back effect

Description : When a teacher ensures that students complete an exercise in mathematics and makes sure instructions are clear and specific. The teacher ensures the ........ aspect of assessment Options: A) A Validity B) Practicality C) Reliability D) Wash-back effect

Last Answer : A) A Validity 

The relative heat absorption for successively added equal areas of boiler convection heating surfaces__________ (A) Increases (B) Decreases (C) Remain unaffected (D) First increases and then decreases

Description : The relative heat absorption for successively added equal areas of boiler convection heating surfaces__________ (A) Increases (B) Decreases (C) Remain unaffected (D) First increases and then decreases

Last Answer : (B) Decreases

Mode of heat transfer in which the fluid moves under the influence of changes in fluid pressure produced by external work is called (A) Radiation (B) Natural convection (C) Forced convection (D) Conduction

Description : Mode of heat transfer in which the fluid moves under the influence of changes in fluid pressure produced by external work is called (A) Radiation (B) Natural convection (C) Forced convection (D) Conduction

Last Answer : (C) Forced convection

Fluid motion in the natural convection heat transfer between a solid surface and a fluid in contact with it, results from the (A) Existence of thermal boundary layer (B) Temperature gradient produced due to density difference (C) Buoyancy of the bubbles produced at active nucleation site (D) None of these

Description : Fluid motion in the natural convection heat transfer between a solid surface and a fluid in contact with it, results from the (A) Existence of thermal boundary layer (B) Temperature gradient produced ... difference (C) Buoyancy of the bubbles produced at active nucleation site (D) None of these

Last Answer : (D) None of these

Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Oxygen enrichment of combustion air does not result in increase of the (A) Flame temperature (B) Oxygen in the flue gas (C) Stack loss (D) Heat transfer rate in the furnace

Description : Oxygen enrichment of combustion air does not result in increase of the (A) Flame temperature (B) Oxygen in the flue gas (C) Stack loss (D) Heat transfer rate in the furnace

Last Answer : (B) Oxygen in the flue gas

Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) Burning the fuel with theoretically required amount of pure oxygen results in attainment of maximum adiabatic flame temperature (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values

Description : Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) ... flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values

Last Answer : (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature

Theoretical flame temperature of a fuel is that temperature which is attained, when the fuel is completely burnt 'using theoretical amount of air in (A) Air (B) Oxygen (C) Either (A) or (B) (D) Either (A) or (B) without gain or loss of heat

Description : Theoretical flame temperature of a fuel is that temperature which is attained, when the fuel is completely burnt 'using theoretical amount of air in (A) Air (B) Oxygen (C) Either (A) or (B) (D) Either (A) or (B) without gain or loss of heat

Last Answer : (D) Either (A) or (B) without gain or loss of heat

Centralizing the integrity checking directly under the DBMS ………….. Duplication and ensures the consistency and validity of the database. A) Increases B) Skips C) Does not reduce D) Reduces

Description : Centralizing the integrity checking directly under the DBMS ………….. Duplication and ensures the consistency and validity of the database. A) Increases B) Skips C) Does not reduce D) Reduces

Last Answer : D) Reduces

The main advantage of forced draft over natural draft is that (A) Combustion of fuel is complete (B) Smaller height chimney can be used (C) Furnace control is easier (D) All (A), (B) & (C)

Description : The main advantage of forced draft over natural draft is that (A) Combustion of fuel is complete (B) Smaller height chimney can be used (C) Furnace control is easier (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Adiabatic flame temperature of a fuel is dependent on the initial temperature of (A) Fuel (B) Air (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Adiabatic flame temperature of a fuel is dependent on the initial temperature of (A) Fuel (B) Air (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

There is a lamp inside a photography darkroom. When the darkroom door is closed, it is impossible to tell from outside the room whether or not the lamp is on. There are two switches outside the door of the darkroom. One or both of the switches may control the lamp. It also could be that neither of the switches control the lamp. All you know is that the light bulb is currently off and that the lamp and bulb are in working condition. The darkroom door is closed and once you open the door you cannot touch either of the switches. If you can only open the dark-room door one time, how can you tell which switches, if any, control the lamp? -Riddles

Description : There is a lamp inside a photography darkroom. When the darkroom door is closed, it is impossible to tell from outside the room whether or not the lamp is on. There are two switches outside the door of ... dark-room door one time, how can you tell which switches, if any, control the lamp? -Riddles

Last Answer : Turn the first switch on and leave it on for ten minutes. After ten minutes, turn that switch off and turn the second switch on. Open the darkroom door, and lightly (in case it is hot) touch the ... one controls the lamp. If the lamp is off, and the bulb is cool, neither switch controls the lamp.

Oil produced by solvent extraction (A) Has low free fatty acid content (B) Is odourless (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Oil produced by solvent extraction (A) Has low free fatty acid content (B) Is odourless (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

On placing an inverted tumbler over a burning candle, the flame extinguishes after some – time . This is because of non –availability of a) oxygen b)water vapour c)carbon dioxide d)wax

Description : On placing an inverted tumbler over a burning candle, the flame extinguishes after some – time . This is because of non –availability of a) oxygen b)water vapour c)carbon dioxide d)wax

Last Answer : a) oxygen

The atmosphere near the earth’s surface is “heated from below.” Which of the following does not significantly contribute to this heating -----------? A. Conduction of heat upward from a hot surface B. Convection from a hot surface C. Absorption of infrared energy that has been radiated from the surface D. Heat energy from the earth’s interior (Answer)

Description : The atmosphere near the earth's surface is heated from below. Which of the following does not significantly contribute to this heating -----------? A. Conduction of heat upward from a ... infrared energy that has been radiated from the surface D. Heat energy from the earth's interior (Answer)

Last Answer : D. Heat energy from the earth’s interior (Answer)

In an oil lamp, the oil rises up in the wick due to? A. Capillary action (Answer) B. Atmospheric pressure C. Viscosity of oil D. Change in temperature

Description : In an oil lamp, the oil rises up in the wick due to? A. Capillary action (Answer) B. Atmospheric pressure C. Viscosity of oil D. Change in temperature

Last Answer : A. Capillary action (Answer)

Presence of moisture in fuel oil would (A) Keep the burner tips cool (B) Aid in proper combustion (C) Because sputtering, possibly extinguishing flame (D) Clean the nozzles

Description : Presence of moisture in fuel oil would (A) Keep the burner tips cool (B) Aid in proper combustion (C) Because sputtering, possibly extinguishing flame (D) Clean the nozzles

Last Answer : (D) Clean the nozzles

The draught may be produced by a_________ a) Chimney b) Mechanical fan c) Steam jet d) All of the above

Description : The draught may be produced by a_________ a) Chimney b) Mechanical fan c) Steam jet d) All of the above

Last Answer : d) All of the above

The draught in locomotive boilers is produced by a ___________ a) Chimney b) Centrifugal fan c) Steam jet d) All of the above

Description : The draught in locomotive boilers is produced by a ___________ a) Chimney b) Centrifugal fan c) Steam jet d) All of the above

Last Answer : c) Steam jet

The surface of water in a pond remains cool even on a hot day because 1. water evaporates at the surface and evaporation causes cooling 2. the heat absorbed at the surface is transmitted downwards 3. Water in contact with the bottom of the pond becomes cool and rises to the surface due to convection Which of the above statements is/are correct? (a) 1 only (b) 3 only (c) 1 and 3 (d) 1, 2 and 3

Description : The surface of water in a pond remains cool even on a hot day because 1. water evaporates at the surface and evaporation causes cooling 2. the heat absorbed at the surface is transmitted downwards 3. Water in contact with the bottom ... /are correct? (a) 1 only (b) 3 only (c) 1 and 3 (d) 1, 2 and 3

Last Answer : Ans:(a)

During summer, we feel comfortable under a fan because it (a) throws cool air on us (b) sets the air in motion, thereby increasing the evaporation of sweat (c) produces convection currents (d) produces air which carries heat away from the body

Description : During summer, we feel comfortable under a fan because it (a) throws cool air on us (b) sets the air in motion, thereby increasing the evaporation of sweat (c) produces convection currents (d) produces air which carries heat away from the body

Last Answer : Ans:(b)

Heat transfer occurs by natural convection because change in temperature causes difference in (A) Viscosity (B) Density (C) Thermal conductivity (D) Heat capacity

Description : Heat transfer occurs by natural convection because change in temperature causes difference in (A) Viscosity (B) Density (C) Thermal conductivity (D) Heat capacity

Last Answer : (B) Density

Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Description : Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Last Answer : (4) Of the capillary action phenomenon Explanation: It is because of the capillary action phenomenon because of which oil rise up the wick in a lamp. Capillary action, or capillarity, is the ability ... such as paper, in some nonporous materials such as liquefied carbon fiber, or in a cell.

Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Description : Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Last Answer : (4) Of the capillary action phenomenon Explanation: It is because of the capillary action phenomenon because of which oil rise up the wick in a lamp. Capillary action, or capillarity, is the ability ... such as paper, in some nonporous materials such as liquefied carbon fiber, or in a cell.

If you have only one match and you walked into a room where there was an oil burner, a kerosene lamp, and a wood burning stove, what would you light first? ..the kerosene lamp because it is easier ..the oil burner... the wood burning stove... the thing in my hand

Description : If you have only one match and you walked into a room where there was an oil burner, a kerosene lamp, and a wood burning stove, what would you light first? ..the kerosene lamp because it is easier ..the oil burner... the wood burning stove... the thing in my hand

Last Answer : the thing in my hand

Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Description : Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Last Answer : Of the capillary action phenomenon

How does smoking cigarettes impact the red blood cells? A. Decreases their ability to congeal B. Decreases their ability to carry oxygen (Answer) C. Decreases their ability to reach their typical life duration D. Decreases their ability to cleanse wounds

Description : How does smoking cigarettes impact the red blood cells? A. Decreases their ability to congeal B. Decreases their ability to carry oxygen (Answer) C. Decreases their ability to reach their typical life duration D. Decreases their ability to cleanse wounds

Last Answer : B. Decreases their ability to carry oxygen (Answer)

Noise produced by cooling fans (employed in air cooled heat exchangers or cooling tower) is mainly caused due to the turbulence created by blade passage through air. It can be reduced by use of a slower fan (A) With greater number of blades (B) Of increased diameter (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Noise produced by cooling fans (employed in air cooled heat exchangers or cooling tower) is mainly caused due to the turbulence created by blade passage through air. It can be reduced by use of a slower fan (A) With greater ... (B) Of increased diameter (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be a.500 b.107 dynes c.250 d.3000 e.1000

Description : A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be a.500 b.107 dynes c.250 d.3000 e.1000

Last Answer : c. 250

A grinding wheel rotates at 3000 rpm. When power supply is cut-off the wheel stops in 10 seconds. The number of revolutions made by the wheel before coming to rest would be a.1500 b.3000 c.1000 d.250 e.500

Description : A grinding wheel rotates at 3000 rpm. When power supply is cut-off the wheel stops in 10 seconds. The number of revolutions made by the wheel before coming to rest would be a.1500 b.3000 c.1000 d.250 e.500

Last Answer : d. 250

Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature (C) Heat release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)

Description : Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature ... release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Preheating of __________ the flame temperature. (A) The gaseous fuel before combustion decreases (B) Combustion air decreases (C) Either the fuel or the air or both, increases (D) Either the fuel or the air does not affect

Description : Preheating of __________ the flame temperature. (A) The gaseous fuel before combustion decreases (B) Combustion air decreases (C) Either the fuel or the air or both, increases (D) Either the fuel or the air does not affect

Last Answer : (C) Either the fuel or the air or both, increases

When a console indicating lamp burns out, attempts to renew it should not be made while maneuvering because _______________. A. the new lamp may be of a higher wattage and cause heat damage to the lens B. removing a faulty lamp usually causes an alarm to sound on the bridge C. attention should be paid only to engine orders D. a socket/wiring fault may cause a ground or short circuit to shut down a vital function

Description : When a console indicating lamp burns out, attempts to renew it should not be made while maneuvering because _______________. A. the new lamp may be of a higher wattage and cause heat damage to the lens ... D. a socket/wiring fault may cause a ground or short circuit to shut down a vital function

Last Answer : Answer: D

Which of the following statement(s) is/are true concerning the treatment of MOFS? a. Prevention and therapy of MOFS requires control of the infectious or inflammatory source b. Restoration of normal clinical parameters such as blood pressure, pulse rate, and urine output ensures optimal resuscitation in most patients c. Branch chain amino acids play and important role in the nutritional support of the patient d. Because of the nature of gut injury, total parenteral nutrition is preferred for most patients with MOFS

Description : Which of the following statement(s) is/are true concerning the treatment of MOFS? a. Prevention and therapy of MOFS requires control of the infectious or inflammatory source b. Restoration of normal ... of the nature of gut injury, total parenteral nutrition is preferred for most patients with MOFS

Last Answer : Answer: a, c The therapy of MOFS is directed towards interrupting the involving pathophysiologic process and providing an optimal physiologic environment for healing and recovery. ... Enteral absorption and processing of nutrients appears superior to TPN and lessens overall complications