What is related to the overall functionality of the delivered ? a) Function-related metrics b) Product-related metrics c) Size-related metrics d) None of the mentioned

What is related to the overall functionality of the 

delivered ?

a) Function-related metrics

b) Product-related metrics

c) Size-related metrics

d) None of the mentioned
by

1 Answer

Answer :

b) False
by

Related questions

Which of the following serves as metrics for project size estimation? A. Lines of codes B. function point C. Number of persons D. Only A & B

Description : Which of the following serves as metrics for project size estimation? A. Lines of codes B. function point C. Number of persons D. Only A & B

Last Answer : D. Only A & B

Problems with using Lines of Code to measure the size of a product include(s) a) The creation of source code is only part of the development effort b) The Lines of Code (LOC) will differ between languages and cannot bemeasured for some languages c) Should comments, data definitions etc (i.e. non-executable LOC) be includedas well? D) The final size (kLOC) can only be determined once the product is delivered e) All of the above.

Description : Problems with using Lines of Code to measure the size of a product include(s) a) The creation of source code is only part of the development effort b) The Lines of Code (LOC) will differ between ... The final size (kLOC) can only be determined once the product is delivered e) All of the above.

Last Answer : e) All of the above.

Process Analysis is a function of: A. Performance AnalysisD. Quality Improvement Plan B. Quality Metrics C. Process Improvement Plan

Description : Process Analysis is a function of: A. Performance Analysis B. Quality Metrics C. Process Improvement Plan D. Quality Improvement Plan

Last Answer : C. Process Improvement Plan

Process Analysis is a function of: A. Performance Analysis B. Quality Metrics C. Process Improvement Plan D. Quality Improvement Plan

Description : Process Analysis is a function of: A. Performance Analysis B. Quality Metrics C. Process Improvement Plan D. Quality Improvement Plan

Last Answer : C. Process Improvement Plan

The PM distributed a document to the stakeholders, which described the software to be developed, the functionality, the users it would serve and the installation timeline. The document was an example of: 1. Product scope2. Project scope 3. A combination of project and product scope 4. It was not complete enough to be either a product or a project scope document

Description : The PM distributed a document to the stakeholders, which described the software to be  developed, the functionality, the users it would serve and the installation timeline. The document  was an example of: ... scope  4. It was not complete enough to be either a product or a project scope document

Last Answer : 4. It was not complete enough to be either a product or a project scope document

)In a program or project plan, there are always revisions to account for new or missing data. Which one of the following provides the best reason for performing a revision of the plan? 1. A supplier has changed the way their product is delivered to your supplier 2. Project tasks are crashed to meet their end dates 3. Human resources will remain constant through out the project 4. Historical data on a similar project suggests that risk events are not included in the current plan.

Description : )In a program or project plan, there are always revisions to account for new or missing data.  Which one of the following provides the best reason for performing a revision of the plan? 1. ... 4. Historical data on a similar project suggests that risk events are not included in the current  plan.

Last Answer : 2. Project tasks are crashed to meet their end dates

Upper CASE tools are used to create diagrams and generate code for database tables system functionality during the design phase.

Description : Upper CASE tools are used to create diagrams and generate code for database tables  system functionality during the design phase.

Last Answer : Ans: False

Timeboxing is a popular technique which sets a fixed deadline for a project and delivers the system by that deadline no matter what, even if functionality needs to be reduced.

Description : Timeboxing is a popular technique which sets a fixed deadline for a project and  delivers the system by that deadline no matter what, even if functionality needs to be  reduced.

Last Answer : Ans: True

Project management is the process of planning and controlling the development of a system within a specified time frame at a minimum cost with the right functionality. Ans: True

Description : Project management is the process of planning and controlling the development of a  system within a specified time frame at a minimum cost with the right functionality.  Ans: True

Last Answer : Ans: True

_____ is the process of planning and controlling the development of a system within a specified time frame at a minimum cost with the right functionality. a. Project management b. Symantic timeline c. Task identification d. Time estimation e. Work plan

Description : _____ is the process of planning and controlling the development of a system within a  specified time frame at a minimum cost with the right functionality.  a. Project management  b. Symantic timeline  c. Task identification  d. Time estimation  e. Work plan

Last Answer : a. Project management

Each component of the software product is separately estimated and the results aggregated to produce an estimate for the overall job. (A) Algorithmic model (B) Expert judgment (C) Bottom-up (D) Top down

Description : Each component of the software product is separately estimated and the results aggregated to produce an estimate for the overall job. (A) Algorithmic model (B) Expert judgment (C) Bottom-up (D) Top down

Last Answer : (C) Bottom-up

Each component of the product is separately estimated and the results aggregated to produce an estimate for the overall job. (A)Algorithmic model (B)Expert judgment (C)Bottom-up (D)Top down

Description : Each component of the product is separately estimated and the results aggregated to produce an estimate for the overall job. (A)Algorithmic model (B)Expert judgment (C)Bottom-up (D)Top down

Last Answer : (C)Bottom-up

The aim of engineering is to produce that is a) Fault-free b) Delivered on time c) Delivered within budget d) Satisfies users’ needs e) All of these are the aims of engineering

Description : The aim of engineering is to produce that is a) Fault-free b) Delivered on time c) Delivered within budget d) Satisfies users’ needs e) All of these are the aims of engineering

Last Answer : e) All of these are the aims of engineering

Project close out check list do not include the followings A. Confirm the customer satisfaction B. Check that all the project criteria of the project have been met C. Confirm all the deliverables have been given to the customer D. Changes suggested by Stockholder have not been delivered

Description : Project close out check list do not include the followings A. Confirm the customer satisfaction  B. Check that all the project criteria of the project have been met C. Confirm all the deliverables have been given to the customer  D. Changes suggested by Stockholder have not been delivered

Last Answer : D. Changes suggested by Stockholder have not been delivered

A Unit Price (UP) contract provides: 1. a reimbursement of allowable costs plus a fixed fee which is paid proportionately as the contract progresses 2. a reimbursement of allowable cost of services performed plus an agreed upon percentage of the estimated cost as profit 3. the supplier with a fixed price for delivered performance plus a predetermined fee for superior performance 4. a fixed price where the supplier agrees to furnish goods and services at unit rates and the final price is dependent on the quantities needed to carry out the work.

Description : A Unit Price (UP) contract provides: 1. a reimbursement of allowable costs plus a fixed fee which is paid proportionately as the  contract progresses  2. a reimbursement of allowable cost of services ... unit rates and the  final price is dependent on the quantities needed to carry out the work.

Last Answer : 4. a fixed price where the supplier agrees to furnish goods and services at unit rates and the  final price is dependent on the quantities needed to carry out the work

Science bases its estimation of the size of a product on a) Files (Fi), Flows (Fl) and Processes (Pr) b) Lines of Code (kLOC) c) Function Points (FP) d) operands and operators e) Feature Points (FeP).

Description : Science bases its estimation of the size of a product on a) Files (Fi), Flows (Fl) and Processes (Pr) b) Lines of Code (kLOC) c) Function Points (FP) d) operands and operators e) Feature Points (FeP).

Last Answer : d) operands and operators

. The process that evaluates overall project performance to provide confidence is called: a. quality assurance. b. quality planning. c. quality control. d. quality audit.

Description : . The process that evaluates overall project performance to provide confidence is called: a. quality assurance. b. quality planning. c. quality control. d. quality audit.

Last Answer : a. quality assurance.

. An important aim of a post-project review is to: a. validate overall progress to date against the budget and schedule. b. capture learning and document it for future usage. c. ensure acceptance of all permanent documentation, signed by the sponsor. d. establish that project benefits have been identified.

Description : . An important aim of a post-project review is to: a. validate overall progress to date against the budget and schedule. b. capture learning and document it for future usage. c. ... of all permanent documentation, signed by the sponsor. d. establish that project benefits have been identified.

Last Answer : b. capture learning and document it for future usage.

Scheduling can best be defined as the process used to determine: a. overall project duration. b. project cost estimating. c. the project management plan. d. sub-contractor’s responsibilities.

Description : Scheduling can best be defined as the process used to determine: a. overall project duration. b. project cost estimating. c. the project management plan. d. sub-contractor’s responsibilities.

Last Answer : a. overall project duration.

Which of the following is not project management goal? a) Keeping overall costs within budget b) Delivering the software to the customer at the agreed time c) Maintaining a happy and well-functioning development team

Description : Which of the following is not project management goal? a) Keeping overall costs within budget b) Delivering the software to the customer at the agreed time c) Maintaining a happy and well-functioning development team

Last Answer : d) Avoiding customer complaints

This set of Software Engineering Multiple Choice Questions & Answers (MCQs) focuses on “Project Management”. 1. Which of the following is not project management goal? a) Keeping overall costs within budget b) Delivering the software to the customer at the agreed time c) Maintaining a happy and well-functioning development team d) Avoiding customer complaints

Description : This set of Software Engineering Multiple Choice Questions & Answers (MCQs) focuses on Project  Management . 1. Which of the following is not project management goal? a) Keeping overall ... agreed time c) Maintaining a happy and well-functioning development team d) Avoiding customer complaints

Last Answer : d) Avoiding customer complaints

The Project Leader is the person responsible for the overall project. (True/False)

Description : The Project Leader is the person responsible for the overall project. (True/False)

Last Answer : Ans. True

Which of the following is not project management goal? a) Keeping overall costs within budget. b) Delivering to the customer at the agreed time. c) Maintaining a happy and well-functioning development team. d) Avoiding costumer complaints.

Description : Which of the following is not project management goal? a) Keeping overall costs within budget. b) Delivering to the customer at the agreed time. c) Maintaining a happy and well-functioning development team. d) Avoiding costumer complaints.

Last Answer : d) Avoiding costumer complaints.

The process that evaluates overall project performance to provide confidence is called: a. quality assurance. b. quality planning. c. quality controld. quality audit..

Description : The process that evaluates overall project performance to provide confidence is called:  a. quality assurance.  b. quality planning.  c. quality control. d. quality audit.

Last Answer : a. quality assurance.

An important aim of a post-project review is to: a. validate overall progress to date against the budget and schedule. b. capture learning and document it for future usage. c. ensure acceptance of all permanent documentation, signed by the sponsor. d. establish that project benefits have been identified

Description : An important aim of a post-project review is to:  a. validate overall progress to date against the budget and schedule.  b. capture learning and document it for future usage.  c. ... of all permanent documentation, signed by the sponsor.  d. establish that project benefits have been identified

Last Answer : b. capture learning and document it for future usage.

Scheduling can best be defined as the process used to determine: a. overall project duration. b. project cost estimating. c. the project management plan.

Description : Scheduling can best be defined as the process used to determine:  a. overall project duration.  b. project cost estimating.  c. the project management plan.

Last Answer : a. overall project duration.

The project closing process is essential to overall project planning. What is considered one of the most important steps in closing the project? 1. Insuring that plans are produced to implement the project by phases. 2. Issuing work orders so that financial data can be collected. 3. Transition the lease of equipment to the owner 4. Satisfying the contractual obligations

Description : The project closing process is essential to overall project planning. What is considered one of  the most important steps in closing the project? 1. Insuring that plans are produced to implement ... .  3. Transition the lease of equipment to the owner  4. Satisfying the contractual obligations

Last Answer : 4. Satisfying the contractual obligations

If the beta of a stock is 1.8 and the overall market declines 20%, the expected return is: A. -36% B. -18%. C. -20%. D.

Description : If the beta of a stock is 1.8 and the overall market declines 20%, the expected return is: A. -36% B. -18%. C. -20%. D.

Last Answer :  A. -36%

Which of the following is not a product matrix ? Size Reliability Productivity Functionality

Description : Which of the following is not a product matrix ? Size Reliability Productivity Functionality

Last Answer : Productivity

Point out the wrong statement. a) Amazon Machine Instances are sized at various levels and rented on a computing/hour basis b) The metrics obtained by CloudWatch may be used to enable a feature called Auto Scaling c) A number of tools are used to support EC2 services d) None of the mentioned

Description : Point out the wrong statement. a) Amazon Machine Instances are sized at various levels and rented on a computing/hour basis b) The metrics obtained by CloudWatch may be used to enable a feature called Auto Scaling c) A number of tools are used to support EC2 services d) None of the mentioned

Last Answer : None of the mentioned

Which of the following metrics are used to support Elastic Load Balancing? a) CloudWatch b) Amazon Elastic Block Store c) AWS Import/Export d) All of the mentioned

Description : Which of the following metrics are used to support Elastic Load Balancing? a) CloudWatch b) Amazon Elastic Block Store c) AWS Import/Export d) All of the mentioned

Last Answer : CloudWatch

While estimating the cost of software, Lines of Code (LOC) and Function Points (FP) are used to measure which one of the following? (A) Length of code (B) Size of software (C) Functionality of software (D) None of the above

Description : While estimating the cost of software, Lines of Code (LOC) and Function Points (FP) are used to measure which one of the following? (A) Length of code (B) Size of software (C) Functionality of software (D) None of the above

Last Answer : (B) Size of software

Which of the following technique overcomes drawback related to LOC? A. Project Planning Sheet B. Function Point Metric C. COCOMO D. COCOMO2

Description : Which of the following technique overcomes drawback related to LOC? A. Project Planning Sheet B. Function Point Metric C. COCOMO D. COCOMO2

Last Answer : B. Function Point Metric

In case of a centrifugal pump, the ratio of total delivered pressure to pressure developed with the impeller is called the __________ efficiency. (A) Manometric (B) Mechanical (C) Volumetric (D) Overall

Description : In case of a centrifugal pump, the ratio of total delivered pressure to pressure developed with the impeller is called the __________ efficiency. (A) Manometric (B) Mechanical (C) Volumetric (D) Overall

Last Answer : (A) Manometric

What are the essential tight constraint/s related to the design metrics of an embedded system? A. Ability to fit on a single chip B. Low power consumption C. Fast data processing for real-time operations D .All of the above

Description : What are the essential tight constraint/s related to the design metrics of an embedded system? A. Ability to fit on a single chip B. Low power consumption C. Fast data processing for real-time operations D .All of the above

Last Answer : D .All of the above

What are the essential tight constraint/s related to the design metrics of an embedded system? A. Ability to fit on a single chip B. Low power consumption C. Fast data processing for real-time operations D .All of the above

Description : What are the essential tight constraint/s related to the design metrics of an embedded system? A. Ability to fit on a single chip B. Low power consumption C. Fast data processing for real-time operations D .All of the above

Last Answer : D .All of the above 

Point out the correct statement. a) To determine whether your application will port successfully, you should perform a functionality mapping exercise b) Cloud computing supports some application features better than others c) Cloud bursting is an overflow solution that clones the application to the cloud and directs traffic to the cloud during times of high traffic d) All of the mentioned

Description : Point out the correct statement. a) To determine whether your application will port successfully, you should perform a functionality mapping exercise b) Cloud computing supports some application features better ... directs traffic to the cloud during times of high traffic d) All of the mentioned

Last Answer : All of the mentioned

Point out the correct statement. a) To determine whether your application will port successfully, you should perform a functionality mapping exercise b) Cloud computing supports some application features better than others c) Cloud bursting is an overflow solution that clones the application to the cloud and directs traffic to the cloud during times of high traffic d) All of the mentioned

Description : Point out the correct statement. a) To determine whether your application will port successfully, you should perform a functionality mapping exercise b) Cloud computing supports some application features better ... directs traffic to the cloud during times of high traffic d) All of the mentioned

Last Answer : All of the mentioned

Which of the following can estimate size of project directly from problem specification? A. LOC B. Function Point Metric C. Both D. None

Description : Which of the following can estimate size of project directly from problem specification? A. LOC B. Function Point Metric C. Both D. None

Last Answer : B. Function Point Metric

A function point is a measure of program size based on the number and complexity of inputs, outputs, queries, files and program interfaces.

Description :  A function point is a measure of program size based on the number and complexity of  inputs, outputs, queries, files and program interfaces.

Last Answer : Ans: True

Function points are used to measure the estimated _____ of a project. a. complexity b. effort required c. program size d. time required

Description : Function points are used to measure the estimated _____ of a project.  a. complexity  b. effort required  c. program size  d. time required

Last Answer : c. program size

A(n) ____________ is a measure of program size based on the number and complexity of inputs, outputs, queries, files, and program interfaces. a. function point b. line of code c. project plan d. standard module e. workplan

Description : A(n) ____________ is a measure of program size based on the number and  complexity of inputs, outputs, queries, files, and program interfaces.  a. function point  b. line of code  c. project plan  d. standard module  e. workplan

Last Answer : a. function point

Define the following terms: (i) Product metrics (ii) Live variables (iii) FAN IN

Description : Define the following terms: (i) Product metrics (ii) Live variables (iii) FAN IN

Last Answer : Ans: (i) Product metrics: describe the characteristics of the product such as size, complexity, design features, performance, efficiency, reliability, portability, etc. (ii) A variable is live from its first ... count of the number of other Components that can call, or pass control, to Component A.

Function oriented metrics were first proposed by ? John Gaffney Albrecht Basili

Description : Function oriented metrics were first proposed by ? John Gaffney Albrecht Basili

Last Answer : Albrec

What is function point? Explain its importance. What is function-oriented metrics?

Description : What is function point? Explain its importance. What is function-oriented metrics?

Last Answer : Ans. Function point measures the functionality from the user point of view, that is, on the basis of what the user request and receives in return. Therefore, it deals with ... empirical relationship based on countable measures of software's information domain and assessments of software complexity.

Which of the following is/are main parameters that you should use when computing the costs of a software development project? a) travel and training costs b) hardware and software costs c) effort costs (the costs of paying software engineers and managers) d) all of the mentioned

Description : Which of the following is/are main parameters that you should use when computing the costs of a software development project? a) travel and training costs b) hardware and software costs c) effort costs (the costs of paying software engineers and managers) d) all of the mentioned

Last Answer : d) all of the mentioned

The process each manager follows during the life of a project is known as a) Project Management b) Manager life cycle c) Project Management Life Cycle d) All of the mentioned

Description : The process each manager follows during the life of a project is known as a) Project Management b) Manager life cycle c) Project Management Life Cycle d) All of the mentioned

Last Answer : c) Project Management Life Cycle

Which of the following is/are main parameters that you should use when computing the costs of a software development project? a) travel and training costs b) hardware and software costs c) effort costs (the costs of paying software engineers and managers) d) all of the mentioned

Description : Which of the following is/are main parameters that you should use when computing the costs of a  software development project? a) travel and training costs b) hardware and software costs c) effort costs (the costs of paying software engineers and managers) d) all of the mentioned

Last Answer : d) all of the mentioned

The process each manager follows during the life of a project is known as a) Project Management b) Manager life cycle c) Project Management Life Cycle d) All of the mentioned

Description :  The process each manager follows during the life of a project is known as a) Project Management b) Manager life cycle c) Project Management Life Cycle d) All of the mentioned

Last Answer : c) Project Management Life Cycle