For a perfectly transparent surface (like gases), the (A) Absorptivity = 0 (B) Transmissivity = 1 (C) Reflectivity = 0

For a perfectly transparent surface (like gases), the

(A) Absorptivity = 0

(B) Transmissivity = 1

(C) Reflectivity = 0

by

1 Answer

Answer :

(B) Transmissivity = 1

by

Related questions

For an ideal black body (A) Absorptivity = 1 (B) Reflectivity = 1 (C) Emissivity = 0 (D) Transmissivity = 1

Description : For an ideal black body (A) Absorptivity = 1 (B) Reflectivity = 1 (C) Emissivity = 0 (D) Transmissivity = 1

Last Answer : (A) Absorptivity = 1

Define the following terms : (i) absorptivity (ii) reflectivity (iii) transmissivity (iv) emissivity

Description : Define the following terms : (i) absorptivity (ii) reflectivity (iii) transmissivity (iv) emissivity

Last Answer : Absorptivity: It is the fraction of total incident radiation which is absorbed by a body. Reflectivity: It is the fraction of total incident radiation which is reflected by a body.  Transmissivity: It ... total emissive power of a body to emissive power of a black body at the same temperature. 

Out of 100 kcal/second of incident radiant energy on the surface of a thermally transparent body, 300 kcal/second is reflected back. If the transmissivity of the body is 0.25, the emissivity of the surface will be (A) 0.35 (B) 0.45 (C) 0.55 (D) 0.85

Description : Out of 100 kcal/second of incident radiant energy on the surface of a thermally transparent body, 300 kcal/second is reflected back. If the transmissivity of the body is 0.25, the emissivity of the surface will be (A) 0.35 (B) 0.45 (C) 0.55 (D) 0.85

Last Answer : (B) 0.45

Define: i. Transmissivity ii. Black body iii. Grey body iv. Reflectivity

Description : Define: i. Transmissivity ii. Black body iii. Grey body iv. Reflectivity

Last Answer : Transmissivity: It is the the fraction of energy which is transmitted through the body. Or The ratio of amount of energy transmitted to the amount of energy incident on a body. Black body: A ... is defined as the ratio of amount of energy reflected to the amount of energy incident on a body.

The sum of reflectivity and absorptivity for an opaque body is equal to (A) 0.5 (B) 1 (C) 0 (D) 2

Description : The sum of reflectivity and absorptivity for an opaque body is equal to (A) 0.5 (B) 1 (C) 0 (D) 2

Last Answer : (B) 1

Absorptivity and reflectivity of a perfect black body are respectively (A) 1 and 0 (B) 0 and 1 (C) 1 and ∞ (D) 0 and 0.5

Description : Absorptivity and reflectivity of a perfect black body are respectively (A) 1 and 0 (B) 0 and 1 (C) 1 and ∞ (D) 0 and 0.5

Last Answer : (A) 1 and 0

Pick out the wrong statement: (A) With change in temperature, the radiant energy emitted by a black body remains unchanged (B) Absorptivity of a body approaches unity in case of diffuse reflection (C) Absorptivity of a perfectly black body is unity (D) Value of Stefan-Boltzmann constant is 4.876 × 10 -8 KCal/m2 .hr.°K4

Description : Pick out the wrong statement: (A) With change in temperature, the radiant energy emitted by a black body remains unchanged (B) Absorptivity of a body approaches unity in case of diffuse reflection (C) Absorptivity of ... unity (D) Value of Stefan-Boltzmann constant is 4.876 10 -8 KCal/m2 .hr.°K4

Last Answer : (A) With change in temperature, the radiant energy emitted by a black body remains unchanged

Which one of the following is not a matter a global concern in the removal of tropical forests ? (A) Their ability to absorb the chemicals that contribute to depletion of ozone layer. (B) Their role in maintaining the oxygen and carbon balance of the earth. (C) Their ability to regulate surface and air temperatures, moisture content and reflectivity. (D) Their contribution to the biological diversity of the planet.

Description : Which one of the following is not a matter a global concern in the removal of tropical forests ? (A) Their ability to absorb the chemicals that contribute to depletion of ozone layer ... , moisture content and reflectivity. (D) Their contribution to the biological diversity of the planet.

Last Answer : (A) Their ability to absorb the chemicals that contribute to depletion of ozone layer.

What is the absorptivity of a black body? (A) 1 (B) 0 (C) 0.78 (D) 0.95

Description : What is the absorptivity of a black body? (A) 1 (B) 0 (C) 0.78 (D) 0.95

Last Answer : (A) 1

The changes in the reflectivity/emissivity with time, is called: (A) Spectral variation (B) Spatial variation (C) Temporal variation (D) None of these

Description : The changes in the reflectivity/emissivity with time, is called: (A) Spectral variation (B) Spatial variation (C) Temporal variation (D) None of these

Last Answer : Answer: Option C

A reduction of nitrogen nutrient in plants: (A) Affects leaf colour (B) Reduces pigment concentration (C) Increase the visible reflectivity (D) All of these

Description : A reduction of nitrogen nutrient in plants: (A) Affects leaf colour (B) Reduces pigment concentration (C) Increase the visible reflectivity (D) All of these

Last Answer : Answer: Option D

What is the absorptivity of a black body?  A. 0  B. 1  C. 0.5  D. 0.25

Description : What is the absorptivity of a black body?  A. 0  B. 1  C. 0.5  D. 0.25

Last Answer : 1

In thermal radiation for a black body (where, ε is emissivity and α is absorptivity) (A) α = 1; ε ≠ 1 (B) α ≠ 1, ε = 1 (C) α ≠ 1, ε ≠ 1 (D) α = 1; ε = 1

Description : In thermal radiation for a black body (where, ε is emissivity and α is absorptivity) (A) α = 1; ε ≠ 1 (B) α ≠ 1, ε = 1 (C) α ≠ 1, ε ≠ 1 (D) α = 1; ε = 1

Last Answer : (D) α = 1; ε = 1

Absorptivity of a perfect black body is unity. Which of the following has maximum absorptivity? (A) Aluminium foil (B) Refractory bricks (C) Iron plate (D) Coke breeze

Description : Absorptivity of a perfect black body is unity. Which of the following has maximum absorptivity? (A) Aluminium foil (B) Refractory bricks (C) Iron plate (D) Coke breeze

Last Answer : (D) Coke breeze

The ratio of total radiating power to the absorptivity of the body depends upon the __________ as per Kirchoff’s law. (A) Wavelength of radiation (B) Nature of the body (C) Temperature of the body (D) None of these

Description : The ratio of total radiating power to the absorptivity of the body depends upon the __________ as per Kirchoff’s law. (A) Wavelength of radiation (B) Nature of the body (C) Temperature of the body (D) None of these

Last Answer : (C) Temperature of the body

Which of the following has the minimum absorptivity? (A) Aluminium foil (B) Coal dust (C) Refractory bricks (D) Iron plates

Description : Which of the following has the minimum absorptivity? (A) Aluminium foil (B) Coal dust (C) Refractory bricks (D) Iron plates

Last Answer : (A) Aluminium foil

The absorptivity of a body is equal to its emissivity (A) At a particular temperature (B) For circular bodies (C) Under thermal equilibrium (D) None of these

Description : The absorptivity of a body is equal to its emissivity (A) At a particular temperature (B) For circular bodies (C) Under thermal equilibrium (D) None of these

Last Answer : (C) Under thermal equilibrium

The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Description : The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Last Answer : (D) May increase or decrease; depends on the material

The ratio of the total emissive power to the absorptivity for all bodies is same at ther-mal equilibrium". This is __________ law. (A) Kirchoff’s (B) Planck's (C) Wien's displacement (D) Stefan-Boltzmann

Description : The ratio of the total emissive power to the absorptivity for all bodies is same at ther-mal equilibrium". This is __________ law. (A) Kirchoff’s (B) Planck's (C) Wien's displacement (D) Stefan-Boltzmann

Last Answer : (A) Kirchoff’s

Kinetic theory of gases assumes that the collisions between the molecules are  (a) perfectly elastic  (b) perfectly inelastic  (c) partly elastic  (d) partly inelastic  (e) partly elastic and partly inelastic.

Description : Kinetic theory of gases assumes that the collisions between the molecules are  (a) perfectly elastic  (b) perfectly inelastic  (c) partly elastic  (d) partly inelastic  (e) partly elastic and partly inelastic.

Last Answer : Answer : a

Find the current density on the conductor surface when a magnetic field H = 3cos x i + zcos x j A/m, for z>0 and zero, otherwise is applied to a perfectly conducting surface in xy plane. a) cos x i b) –cos x i c) cos x j d) –cos x j

Description : Find the current density on the conductor surface when a magnetic field H = 3cos x i + zcos x j A/m, for z>0 and zero, otherwise is applied to a perfectly conducting surface in xy plane. a) cos x i b) –cos x i c) cos x j d) –cos x j

Last Answer : b) –cos x i

What states that for any two bodies in thermal equilibrium, the ratios of emissive power to the absorptivity are equal?

Description : What states that for any two bodies in thermal equilibrium, the ratios of emissive power to the absorptivity are equal?  A. Kirchhoff’s radiation law  B. Newton’s law of cooling  C. Stefan-Boltzmann law  D. Hess’s law

Last Answer : Kirchhoff’s radiation law

What refers to the rate of thermal radiation emitter per unit area of a body?  A. Thermal conductivity  B. Absorptivity  C. Emissivity  D. Emissive power

Description : What refers to the rate of thermal radiation emitter per unit area of a body?  A. Thermal conductivity  B. Absorptivity  C. Emissivity  D. Emissive power

Last Answer : Emissive power

Small bubbles are perfectly spherical because of – (1) Gravity (2) Pressure (3) Viscosity (4) Surface tension

Description : Small bubbles are perfectly spherical because of – (1) Gravity (2) Pressure (3) Viscosity (4) Surface tension

Last Answer : (4) Surface tension Explanation: Surface tension is responsible for the shape of liquid droplets. Although easily deformed, droplets of water tend to be pulled into a spherical shape by the cohesive ... shape minimizes the necessary "wall tension" of the surface layer according to Laplace's law.

48. A perfectly elastic body (a) Can move freely (b) Has perfectly smooth surface (c) Is not deformed by any external surface (d) Recovers its original size and shape when the deforming force is removed.

Description : 48. A perfectly elastic body (a) Can move freely (b) Has perfectly smooth surface (c) Is not deformed by any external surface (d) Recovers its original size and shape when the deforming force is removed.

Last Answer : d) Recovers its original size and shape when the deforming force is removed.

Small bubbles are perfectly spherical because of (1) Gravity (2) Pressure (3) Viscosity (4) Surface tension

Description : Small bubbles are perfectly spherical because of (1) Gravity (2) Pressure (3) Viscosity (4) Surface tension

Last Answer : Surface tension

Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Description : Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Last Answer : (B) Thermosetting

A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. Specific heat of block material is 0.4 kJ.kg-1. K-1. Ignoring the effect of expansion and contraction and also the heat capacity to tank, the total entropy change in kJ.kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Description : A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. ... .kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Last Answer : (B) 0

Polystyrene is a light, transparent, thermoplastic material used for making (A) Toys and combs (B) Packaging bags (C) Non-sticking utensils (D) Electrical insulation

Description : Polystyrene is a light, transparent, thermoplastic material used for making (A) Toys and combs (B) Packaging bags (C) Non-sticking utensils (D) Electrical insulation

Last Answer : (A) Toys and combs

Transparent soaps (e.g. Pears) are (A) Usually soft soap (made from coconut oil) in which cane sugar & alcohol are added and finally washed with methylated spirit to achieve transparency (B) Metallic soaps with frothing agent and free Stearic acid to achieve transparency (C) Metallic soaps with frothing agent from which glycerine has not been recovered (D) None of these

Description : Transparent soaps (e.g. Pears) are (A) Usually soft soap (made from coconut oil) in which cane sugar & alcohol are added and finally washed with methylated spirit to achieve transparency (B) ... (C) Metallic soaps with frothing agent from which glycerine has not been recovered (D) None of these

Last Answer : (A) Usually soft soap (made from coconut oil) in which cane sugar & alcohol are added and finally washed with methylated spirit to achieve transparency

Pick out the wrong statement pertaining to the soap manufacture. (A) Transparent soaps are made by cold process (B) Organic pigments are used as colouring materials in the soap manufacture (C) Both laundry as well as toilet soaps are manufactured by hot process (D) Colourless rosin is used in the manufacture of laundry soaps

Description : Pick out the wrong statement pertaining to the soap manufacture. (A) Transparent soaps are made by cold process (B) Organic pigments are used as colouring materials in the soap manufacture (C) ... soaps are manufactured by hot process (D) Colourless rosin is used in the manufacture of laundry soaps

Last Answer : (A) Transparent soaps are made by cold process

Phenolic antiseptics are added in the __________ soap. (A) Shaving (B) Medicated (C) Metallic (D) Transparent

Description : Phenolic antiseptics are added in the __________ soap. (A) Shaving (B) Medicated (C) Metallic (D) Transparent

Last Answer : (B) Medicated

Space called vitreous chamber filled with transparent gel like substance found in between

Description : Space called vitreous chamber filled with transparent gel like substance found in between

Last Answer : Space called vitreous chamber filled with transparent gel like substance found in between

Space called vitreous chamber filled with transparent gel like substance found in between

Description : Space called vitreous chamber filled with transparent gel like substance found in between

Last Answer : Space called vitreous chamber filled with transparent gel like substance found in between

What is Value Added Tax (VAT)? (1) A simple, transparent, easy to pay tax imposed on consumers (2) A new initiative taken by the Government to increase the tax-burden of high income groups (3) A single tax that replaces State taxes like, surcharge, turnover tax, etc. (4) A new tax to be imposed on the producers of capital goods

Description : What is Value Added Tax (VAT)? (1) A simple, transparent, easy to pay tax imposed on consumers (2) A new initiative taken by the Government to increase the tax-burden of high income groups (3) A ... like, surcharge, turnover tax, etc. (4) A new tax to be imposed on the producers of capital goods

Last Answer : (3) A single tax that replaces State taxes like, surcharge, turnover tax, etc. Explanation: A value added tax (VAT) is a form of consumption tax. A VAT is like a sales tax in that ... under the single tax system based primarily or exclusively on one tax, typically chosen for its special properties.

What is Value Added Tax (VAT) ? (1) A simple, transparent, easy to pay tax imposed on consumers (2) A new initiative taken by the Government to increase the tax-burden of high income groups (3) A single tax that replaces State taxes like, surcharge, turnover tax, etc. (4) A new tax to be imposed on the producers of capital goods

Description : What is Value Added Tax (VAT) ? (1) A simple, transparent, easy to pay tax imposed on consumers (2) A new initiative taken by the Government to increase the tax-burden of high income groups (3) A ... like, surcharge, turnover tax, etc. (4) A new tax to be imposed on the producers of capital goods 

Last Answer : A single tax that replaces State taxes like, surcharge, turnover tax, etc. 

A ball A of mass 0.25 kg moving on a smooth horizontal table with a velocity of 10 m/s strikes an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after the impact will be a.2.5 m/s b.zero c.5 m/s d.10 m/s e.107 dynes

Description : A ball A of mass 0.25 kg moving on a smooth horizontal table with a velocity of 10 m/s strikes an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after the impact will be a.2.5 m/s b.zero c.5 m/s d.10 m/s e.107 dynes

Last Answer : c. 5 m/s

For perfectly elastic bodies, the value of the coefficient of restitution is a.1 b.0.372 c.0.5 d.Zero e.Any value between 0 and 1

Description : For perfectly elastic bodies, the value of the coefficient of restitution is a.1 b.0.372 c.0.5 d.Zero e.Any value between 0 and 1

Last Answer : a. 1

For perfectly elastic bodies the value of the coefficient of restitution is a.0.707 b.0.5 c.1 d.0.25 e.Zero

Description : For perfectly elastic bodies the value of the coefficient of restitution is a.0.707 b.0.5 c.1 d.0.25 e.Zero

Last Answer : a. 0.707

The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected toa conducting rod PQ of length l=wm which can slide on a perfectly condu

Description : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected toa conducting rod PQ of length l=wm which can slide on a perfectly condu

Last Answer : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected toa conducting rod PQ of length l= ... (inN-m) at t=(0.3In 2) second.

The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected to a conducting rod PQ of length l=wm which can slide on a perfectly cond

Description : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected to a conducting rod PQ of length l=wm which can slide on a perfectly cond

Last Answer : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected to a conducting rod PQ of length ... (inN-m) at t=(0.3In 2) second.

Elasticity (e) expressed by the formula 1 > e > 0 is - (1) Perfectly elastic (2) Relatively elastic (3) Perfectly inelastic (4) Relatively inelastic

Description : Elasticity (e) expressed by the formula 1 > e > 0 is - (1) Perfectly elastic (2) Relatively elastic (3) Perfectly inelastic (4) Relatively inelastic

Last Answer : (4) Relatively inelastic Explanation: Elasticity (e) expressed by the formula 1 > e > 0 is relatively inelastic. Elasticity is responsiveness of one variable to a change in another, when other conditions are held constant.

To run perfectly, all HR department managers should know that a. the negotiation starting point should not exceed 80%. b. the starting point for benefits or wages should be between 0-150% of the current contract. c. all strike settlements should be halfway between the demand and the negotiation ceiling. d. all of the above is correct. e. none of the above are true.

Description : To run perfectly, all HR department managers should know that a. the negotiation starting point should not exceed 80%. b. the starting point for benefits or wages should be between 0-150% of the current ... negotiation ceiling. d. all of the above is correct. e. none of the above are true.

Last Answer : c. all strike settlements should be halfway between the demand and the negotiation ceiling.

Elasticity (e) expressed by the formula l > e > 0 is (1) Perfectly elastic (2) Relatively elastic (3) Perfectly inelastic (4) Relatively inelastic

Description : Elasticity (e) expressed by the formula l > e > 0 is (1) Perfectly elastic (2) Relatively elastic (3) Perfectly inelastic (4) Relatively inelastic

Last Answer : Relatively inelastic

The ratio of Murphree plate efficiency to point efficiency is always > 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The ratio of Murphree plate efficiency to point efficiency is always > 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Plug

The ratio of Murphree plate efficiency to point efficiency is 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The ratio of Murphree plate efficiency to point efficiency is 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Perfectly mixed

To remove all the moisture from a wet solid it requires exposure to __________ air. (A) Perfectly dry (B) Highly humid (C) High temperature (D) None of these

Description : To remove all the moisture from a wet solid it requires exposure to __________ air. (A) Perfectly dry (B) Highly humid (C) High temperature (D) None of these

Last Answer : (A) Perfectly dry

Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A process is irreversible as long as Δ S for the system is greater than zero (C) The mechanical work done by a system is always equal to∫P.dV (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Description : Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A ... compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Last Answer : (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

"At the absolute zero temperature, the entropy of every perfectly crystalline substance becomes zero". This follows from the (A) Third law of thermodynamics (B) Second law of thermodynamics (C) Nernst heat theorem (D) Maxwell's relations

Description : "At the absolute zero temperature, the entropy of every perfectly crystalline substance becomes zero". This follows from the (A) Third law of thermodynamics (B) Second law of thermodynamics (C) Nernst heat theorem (D) Maxwell's relations

Last Answer : (A) Third law of thermodynamics

Which of the following is generally considered as opaque surface towards radiations? (A) Gases (B) Solids (C) Liquids (D) Both (B) and (C)

Description : Which of the following is generally considered as opaque surface towards radiations? (A) Gases (B) Solids (C) Liquids (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)