Pick out the wrong statement pertaining to the soap manufacture. (A) Transparent soaps are made by cold process (B) Organic pigments are used as colouring materials in the soap manufacture (C) Both laundry as well as toilet soaps are manufactured by hot process (D) Colourless rosin is used in the manufacture of laundry soaps

Pick out the wrong statement pertaining to the soap manufacture.
(A) Transparent soaps are made by cold process
(B) Organic pigments are used as colouring materials in the soap
manufacture
(C) Both laundry as well as toilet soaps are manufactured by hot process
(D) Colourless rosin is used in the manufacture of laundry soaps
by

1 Answer

Answer :

(A) Transparent soaps are made by cold process
by

Related questions

Pick out the wrong statement pertaining to nitric acid. (A) About 90% of nitric acid is manufactured by Ostwald's process (B) It is a strong mono basic acid which reacts with almost all the metals except noble metals (C) Yellow color of impure nitric acid is because of dissolved oxides of nitrogen (mainly NO2 ) (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

Description : Pick out the wrong statement pertaining to nitric acid. (A) About 90% of nitric acid is manufactured by Ostwald's process (B) It is a strong mono basic acid which reacts with almost all the ... (mainly NO2 ) (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

Last Answer : (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

(3) Detergents give lather even with hard water Explanation: Soaps are made of materials found in nature. Detergents are synthetic a big drawback of washing with soap is that the minerals in water react with those in soap, leaving an insoluble film. Detergents react less to minerals in water and for all practical purposes are the product of choice for laundry, unless you have very soft water. On the other hand, soap will combine with the magnesium and calcium ions in hard water to create an insoluble residue that can clog drains and stick to clothing.

Description : (3) Detergents give lather even with hard water Explanation: Soaps are made of materials found in nature. Detergents are synthetic a big drawback of washing with soap is that the minerals in water ... ions in hard water to create an insoluble residue that can clog drains and stick to clothing.

Last Answer : What is the objective of the 'Kyoto Protocol'? (1) To abolish child labour (2) To eliminate nuclear weapons (3) To increase ground water levels (4) To reduce greenhouse gases

(3) Detergents give lather even with hard water Explanation: Soaps are made of materials found in nature. Detergents are synthetic. a big drawback of washing with soap is that the minerals in water react with those in soap, leaving an insoluble film. Detergents react less to minerals in water and for all practical purposes are the product of choice for laundry, unless you have very soft water. On the other hand, soap will combine with the magnesium and calcium ions in hard water to create an insoluble residue that can clog drains and stick to clothing.

Description : (3) Detergents give lather even with hard water Explanation: Soaps are made of materials found in nature. Detergents are synthetic. a big drawback of washing with soap is that the minerals in water ... ions in hard water to create an insoluble residue that can clog drains and stick to clothing.

Last Answer : Cement is usually a mixture of – (1) Calcium silicate and calcium alurninate (2) Calcium silicate and calcium ferrate (3) Calcium aluminate and calcium ferrate (4) Lime stone and silicon dioxide

Tall oil obtained as a by-product from the black liquor recovery is (A) A black, sticky & viscous liquid (B) Used in the manufacture of greases, emulsions & soaps (C) Composed mainly of rosin & fatty acids (D) All (A), (B) & (C)

Description : Tall oil obtained as a by-product from the black liquor recovery is (A) A black, sticky & viscous liquid (B) Used in the manufacture of greases, emulsions & soaps (C) Composed mainly of rosin & fatty acids (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Transparent soaps (e.g. Pears) are (A) Usually soft soap (made from coconut oil) in which cane sugar & alcohol are added and finally washed with methylated spirit to achieve transparency (B) Metallic soaps with frothing agent and free Stearic acid to achieve transparency (C) Metallic soaps with frothing agent from which glycerine has not been recovered (D) None of these

Description : Transparent soaps (e.g. Pears) are (A) Usually soft soap (made from coconut oil) in which cane sugar & alcohol are added and finally washed with methylated spirit to achieve transparency (B) ... (C) Metallic soaps with frothing agent from which glycerine has not been recovered (D) None of these

Last Answer : (A) Usually soft soap (made from coconut oil) in which cane sugar & alcohol are added and finally washed with methylated spirit to achieve transparency

Pick out the wrong statement. (A) Eosin requirement in tallow soap is about 40-50% which fastens the lather formation, softens the hard soaps and increases its cleansing action (B) Soap powder is prepared by mixing soap with hydrated sodium carbonate (C) Detergents differ from soaps in their action in hard water (D) Tarnish inhibitor (e.g., Benzotriazole) is added in soap to facilitate the removal of stains due to tea, blood etc

Description : Pick out the wrong statement. (A) Eosin requirement in tallow soap is about 40-50% which fastens the lather formation, softens the hard soaps and increases its cleansing action (B) Soap powder is ... ., Benzotriazole) is added in soap to facilitate the removal of stains due to tea, blood etc

Last Answer : (D) Tarnish inhibitor (e.g., Benzotriazole) is added in soap to facilitate the removal of stains due to tea, blood etc

Rosin soap is added during paper manufacture to (A) Impart adhesive properties (B) Improve opacity (C) Impart resistance to penetration by liquids (D) None of these

Description : Rosin soap is added during paper manufacture to (A) Impart adhesive properties (B) Improve opacity (C) Impart resistance to penetration by liquids (D) None of these

Last Answer : (C) Impart resistance to penetration by liquids

Pick out the wrong statement pertaining to the roll crushers. (A) Maximum feed size determines the required roll diameter (B) For hard material's crushing, the reduction ratio should not exceed 4 (C) Both the rolls run necessarily at the same speed (D) Reduction ratio and differential roll speed affect production rate & energy consumed per unit of surface produced

Description : Pick out the wrong statement pertaining to the roll crushers. (A) Maximum feed size determines the required roll diameter (B) For hard material's crushing, the reduction ratio should not ... ratio and differential roll speed affect production rate & energy consumed per unit of surface produced

Last Answer : (C) Both the rolls run necessarily at the same speed

Pick out the wrong statement pertaining to the cooling towers. (A) In case of induced draft cooling tower, the fan is placed at the top of the tower (B) Effectiveness of forced draft cooling tower is reduced by the recirculation of the humid and hot discharged air (C) A natural draft cooling tower is recommended to be used, when the air humidity is low and air temperature is also low (D) Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Description : Pick out the wrong statement pertaining to the cooling towers. (A) In case of induced draft cooling tower, the fan is placed at the top of the tower (B) Effectiveness of ... Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Last Answer : (D) Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both temperature and pressure in the digestor is less in case of the sulphite method as compared to that in the sulphate method (D) None of these

Description : Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both ... in case of the sulphite method as compared to that in the sulphate method (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely used in the manufacture of automobile tyres (C) Manufacture of phenol by chloroben-zene-eaustic process involves. The chlorination of benzene, causticisation and hydrolysis (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Description : Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely ... D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Last Answer : (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Free alkali in a toilet soap is __________ that in a laundry shop. (A) Less than (B) More than (C) Same (D) None of these

Description : Free alkali in a toilet soap is __________ that in a laundry shop. (A) Less than (B) More than (C) Same (D) None of these

Last Answer : (A) Less than

Pick out the wrong statement. (A) Heat transfer from a hot body to cold body by the emission of heat waves is called radiation (B) Filmwise condensation takes place on non-wettable surfaces (C) The boiling point of a solution is affected by liquid head as well as boiling point elevation (D) None of these

Description : Pick out the wrong statement. (A) Heat transfer from a hot body to cold body by the emission of heat waves is called radiation (B) Filmwise condensation takes place on non-wettable surfaces (C) The ... of a solution is affected by liquid head as well as boiling point elevation (D) None of these

Last Answer : (B) Filmwise condensation takes place on non-wettable surfaces

Pick out the wrong statement pertaining to the analogy between equations of heat and mass transfer operations. (A) Sherwood number in mass transfer is analogous to Nusselt number in heat transfer (B) Prandtl number in heat transfer is analogous to Schmidt number in mass transfer (C) Reynolds number in mass transfer is analogous to Grashoff number in heat transfer (D) Reynolds number remains the same in both heat and mass transfer

Description : Pick out the wrong statement pertaining to the analogy between equations of heat and mass transfer operations. (A) Sherwood number in mass transfer is analogous to Nusselt number in heat transfer ... heat transfer (D) Reynolds number remains the same in both heat and mass transfer

Last Answer : (C) Reynolds number in mass transfer is analogous to Grashoff number in heat transfer

Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C) Raw materials for DDT manufacture are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine

Which of the following is used as a binding material in soap to improve soap texture? (A) Rosin (B) Borax (C) Benzyl acetate (D) Sodium carbonate

Description : Which of the following is used as a binding material in soap to improve soap texture? (A) Rosin (B) Borax (C) Benzyl acetate (D) Sodium carbonate

Last Answer : (B) Borax

Pick out the wrong statement pertaining to the turbine agitator. (A) Recommended peripheral speed for the turbine agitator is 200-250 metres/minute (B) Pitched blade turbine agitator gives only radial flow with complete absence of the axial flow (C) Generally, the diameter of the agitator is kept between l/3rd to l/6th of the tank diameter while the blade length is l/4th of agitator diameter (with central disc, it is l/8th of the agitator diameter)

Description : Pick out the wrong statement pertaining to the turbine agitator. (A) Recommended peripheral speed for the turbine agitator is 200-250 metres/minute (B) Pitched blade turbine agitator gives only radial flow with ... l/4th of agitator diameter (with central disc, it is l/8th of the agitator diameter)

Last Answer : (B) Pitched blade turbine agitator gives only radial flow with complete absence of the axial flow

Pick out the wrong statement pertaining to leaching. (A) Fine solids cannot be leached in a Pachuca tank (B) Door classifier can be used for leaching of coarse solids (C) Vegetable seeds can be leached in either of Bollman extractor, Rotocel or Kennedy extractor (D) Very high temperature is not needed for the leaching of sugar beet

Description : Pick out the wrong statement pertaining to leaching. (A) Fine solids cannot be leached in a Pachuca tank (B) Door classifier can be used for leaching of coarse solids (C) Vegetable seeds can be ... , Rotocel or Kennedy extractor (D) Very high temperature is not needed for the leaching of sugar beet

Last Answer : (A) Fine solids cannot be leached in a Pachuca tank

Pick out the wrong statement pertaining to fluid flow. (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5 (B) The Newtonian fluid velocity in a circular pipe flow is maximum at the centre of the pipe (C) Navier-Stokes equation is applicable to the analysis of viscous flows

Description : Pick out the wrong statement pertaining to fluid flow. (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5 (B) The Newtonian ... at the centre of the pipe (C) Navier-Stokes equation is applicable to the analysis of viscous flows

Last Answer : (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5

Pick out the wrong statement pertaining to space velocity of flow reactors. (A) The unit of space velocity is (time) -1 (B) The space velocity of 3 hr -1 means that three reactor volumes of feed at specified conditions are being fed into the reactor every hour (C) The space velocity of 3 hr -1 means that one third reactor volume of feed at specified conditions are being fed into the reactor (D) None of these

Description : Pick out the wrong statement pertaining to space velocity of flow reactors. (A) The unit of space velocity is (time) -1 (B) The space velocity of 3 hr -1 means that three reactor volumes of ... one third reactor volume of feed at specified conditions are being fed into the reactor (D) None of these

Last Answer : (C) The space velocity of 3 hr -1 means that one third reactor volume of feed at specified conditions are being fed into the reactor

Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes(B) Increases with the increasing flake size keeping the flake thicknessconstant(C) Increases considerably with the rise of temperature(D) Decreases as the moisture content of flakes increases

Description : Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes (B) Increases with the increasing flake size ... considerably with the rise of temperature (D) Decreases as the moisture content of flakes increases

Last Answer : (D) Decreases as the moisture content of flakes increases

Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths

Description : Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths

Last Answer : (B) Sharp melting points

Pick out the wrong statement pertaining to the decomposition of PCl5 represented by, PCl5 ⇌ PCl3 + Cl2.Degree of dissociation of PCl5 will (A) Decrease on addition of Cl2 (B) Increase on addition of an inert gas at constant pressure (C) Decrease on increasing the pressure of the system (D) None of these

Description : Pick out the wrong statement pertaining to the decomposition of PCl5 represented by, PCl5 ⇌ PCl3 + Cl2.Degree of dissociation of PCl5 will (A) Decrease on addition of Cl2 (B) Increase on addition of ... at constant pressure (C) Decrease on increasing the pressure of the system (D) None of these

Last Answer : (D) None of thes

Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Description : Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Last Answer : (D) None of these

Scouring is a finishing operation during the manufacture of fibre, which aims at __________ of fibres. (A) Improving the stretchability (B) Dyeing/colouring (C) Detergent solution washing (D) Glycol soaking

Description : Scouring is a finishing operation during the manufacture of fibre, which aims at __________ of fibres. (A) Improving the stretchability (B) Dyeing/colouring (C) Detergent solution washing (D) Glycol soaking

Last Answer : (C) Detergent solution washing

“Despite their white, fluffy appearance, Polar Bear skin is actually black, and their fur is transparent and colourless. ”

Description : “Despite their white, fluffy appearance, Polar Bear skin is actually black, and their fur is transparent and colourless. ” 

Last Answer : Ask anyone what colour a polar bear is and they will exclaim, white with great enthusiasm, but truth be told, their fur is actually transparent and holds no colour. It only appears white ... ultraviolet light, which means polar bears stand out like a sore thumb against their icy white backdrop.

Are any of the major name brand laundry detergents and dish soaps ecofriendly?

Description : Are any of the major name brand laundry detergents and dish soaps ecofriendly?

Last Answer : I just picked up some Wintree laundry detergent, which claims to be ecofriendly friendly, at Costco.

Best free website for product reviews on household goods such as laundry soaps,etc?

Description : Best free website for product reviews on household goods such as laundry soaps,etc?

Last Answer : Consumer Reports lets you see one class of product before making you subscribe. They are still the most independent.

Pick out the false statement pertaining to water treatment(A) Aeration of water is effective in CO2removal(B) The zeolite water softening process reduces the hardness of water by notmore than 50%(C) Sodium sulphate or sodium carbonate do not cause hardness in water(D) Water with pH value less than 7, is acidic.

Description : Pick out the false statement pertaining to water treatment. (A) Aeration of water is effective in CO2 removal (B) The zeolite water softening process reduces the hardness of water by not more than 50% (C ... carbonate do not cause hardness in water (D) Water with pH value less than 7, is acidic

Last Answer : (B) The zeolite water softening process reduces the hardness of water by not more than 50%

Pick out the wrong statement. (A) Dehydration of ammonium carbamate to produce urea is endothermic (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India is suitable (C) Gypsum (CaSO4 . 2H2O) is obtained as a by-product in the wet process for manufacture of ortho-phosphoric acid (D) Phosphate rock when reacted with dilute H2SO4 produces superphosphate

Description : Pick out the wrong statement. (A) Dehydration of ammonium carbamate to produce urea is endothermic (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India ... manufacture of ortho-phosphoric acid (D) Phosphate rock when reacted with dilute H2SO4 produces superphosphate

Last Answer : (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India is suitable

Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of concentration ≥ 98% (C) 75% oleum can be produced by distillation of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Description : Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of ... of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Last Answer : (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Soap cannot be used with hard water, because (A) Hard water contains sulphate (B) They form insoluble calcium soaps which precipitate (C) They attract back the removed dirt (D) None of these

Description : Soap cannot be used with hard water, because (A) Hard water contains sulphate (B) They form insoluble calcium soaps which precipitate (C) They attract back the removed dirt (D) None of these

Last Answer : (B) They form insoluble calcium soaps which precipitate

Pebble mills are tumbling mills widely used for grinding in the manufacture of paints & pigments and cosmetic industries, where iron contamination in the product is highly objectionable. Pebbles used in pebble mill are made of (A) Bronze (B) Stainless steel (C) Flint or porcelain (D) Concrete

Description : Pebble mills are tumbling mills widely used for grinding in the manufacture of paints & pigments and cosmetic industries, where iron contamination in the product is highly objectionable. Pebbles used in pebble mill are made of (A) Bronze (B) Stainless steel (C) Flint or porcelain (D) Concrete

Last Answer : (C) Flint or porcelain

Pick out the wrong statement. (A) Cold SBR is superior as compared to hot SBR (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Description : Pick out the wrong statement. (A) Cold SBR is superior as compared to hot SBR (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for counter flow and parallel flow can be theoretically same when any one of the fluids (hot or cold fluid) passes through the heat exchanger at constant temperature (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs (D) Phase change in case of a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Description : Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for ... a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Last Answer : (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

Pick out the wrong statement(A) Cold rubber (SBR) is superior as compared to hot rubber (SBR)(B) Polymerisation temperature can modify the properties of SBR(C) Production of cold SBR employs lower pressure as compared to that ofhot SBR(D) None of these

Description : Pick out the wrong statement (A) Cold rubber (SBR) is superior as compared to hot rubber (SBR) (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) DDT is manufactured by the condensation of chlorobenzene with chloral at 30°C in presence of oleum, which is a highly exothermic reaction (B) Chloral is obtained by the chlorination of ethyl alcohol (C) Insecticides acting on the insects through the respiratory system are called fumigants (D) Benzene hexachloride is not a contact insecticide

Description : Pick out the wrong statement. (A) DDT is manufactured by the condensation of chlorobenzene with chloral at 30°C in presence of oleum, which is a highly exothermic reaction (B) Chloral ... through the respiratory system are called fumigants (D) Benzene hexachloride is not a contact insecticide

Last Answer : (D) Benzene hexachloride is not a contact insecticide

Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms of permanganate number (C) Bagasse fibre contains both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Description : Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms ... both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Last Answer : (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Soap kettle used in the production of laundry soap is made of (A) Steel with top section nickel clad or stainless steel (B) Cast iron (C) Nickel (D) Concrete

Description : Soap kettle used in the production of laundry soap is made of (A) Steel with top section nickel clad or stainless steel (B) Cast iron (C) Nickel (D) Concrete

Last Answer : (A) Steel with top section nickel clad or stainless steel

Saponification of a fat (a) always results in the formation of insoluble soaps (b) produces glycerol and soap (c) is used in the production of detergents (d) is used in the production of lactic acid

Description : Saponification of a fat (a) always results in the formation of insoluble soaps (b) produces glycerol and soap (c) is used in the production of detergents (d) is used in the production of lactic acid

Last Answer : produces glycerol and soap

The production of ammonia is important because it is used in the (a) manufacture of proteins by polymerization (b) preparation of soaps (c) manufacture of artificial foods (d) production of fertilizers

Description : The production of ammonia is important because it is used in the (a) manufacture of proteins by polymerization (b) preparation of soaps (c) manufacture of artificial foods (d) production of fertilizers

Last Answer : Ans:(d)

Pick out the wrong statement. Iodine value of an oil or fat is (A) The number of grams of iodine taken up by 100 gm of oil or fat (B) A measure of its unsaturation (C) Helpful in findings its adulteration & its suitability for making soap (D) Independent of the type of oil, whether it is drying or non-drying

Description : Pick out the wrong statement. Iodine value of an oil or fat is (A) The number of grams of iodine taken up by 100 gm of oil or fat (B) A measure of its unsaturation (C) Helpful in findings ... & its suitability for making soap (D) Independent of the type of oil, whether it is drying or non-drying

Last Answer : (D) Independent of the type of oil, whether it is drying or non-drying

Choose the incorrect statement pertaining to organic compounds (1) They have low melting and boiling points (2) They do not dissolve in water (3) They are not easily combustible (4) They contain mainly carbon and hydrogen

Description : Choose the incorrect statement pertaining to organic compounds (1) They have low melting and boiling points (2) They do not dissolve in water (3) They are not easily combustible (4) They contain mainly carbon and hydrogen

Last Answer : They are not easily combustible

Phenolic antiseptics are added in the __________ soap. (A) Shaving (B) Medicated (C) Metallic (D) Transparent

Description : Phenolic antiseptics are added in the __________ soap. (A) Shaving (B) Medicated (C) Metallic (D) Transparent

Last Answer : (B) Medicated

Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given conversion (C) Percentage conversion increases with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Description : Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given ... with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the correct statement pertaining to the flow through a converging-diverging tube. (A) The value of Mach number is always unity at the throat (B) No shock wave develops in the tube when the Mach number at exit is greater than unity (C) Throughout the converging portion of the tube, the density increases in the downstream direction (D) None of these

Description : Pick out the correct statement pertaining to the flow through a converging-diverging tube. (A) The value of Mach number is always unity at the throat (B) No shock wave develops in the tube ... the converging portion of the tube, the density increases in the downstream direction (D) None of these

Last Answer : (B) No shock wave develops in the tube when the Mach number at exit is greater than unity

Pick out the correct statement pertaining to Venturimeter. (A) A Venturimeter with a fixed pressure drop discharges more, when the flow is vertically downward, than when the flow is vertically upward (B) The co-efficient of contraction of a Venturimeter is always unity (C) For a fixed pressure drop, the discharge of a gas through a Venturimeter is greater, when compressibility is taken into account, than when it is neglected (D) None of these

Description : Pick out the correct statement pertaining to Venturimeter. (A) A Venturimeter with a fixed pressure drop discharges more, when the flow is vertically downward, than when the flow is vertically upward (B ... , when compressibility is taken into account, than when it is neglected (D) None of these

Last Answer : (D) None of these