Polystyrene is a light, transparent, thermoplastic material used for
making
(A) Toys and combs
(B) Packaging bags
(C) Non-sticking utensils
(D) Electrical insulation

1 Answer

Answer :

(A) Toys and combs

Related questions

Description : Maximum consumption of polymers is in (A) Electrical insulation (B) Toys making (C) Coating and films (D) Packaging

Last Answer : (C) Coating and films

Description : The name of plastic polymer from which combs, toys, bowls etc., can be made, is (1) Polyurethane (2) Polystyrene (3) Metallic polysulphides (4) Teflon

Last Answer : (2) Polystyrene Explanation: Polystyrene is an synthetic aromatic polymer made from the monomer styrene, a liquid petrochemical. It is one of the most widely used plastics. Uses include protective ... containers (such as "clamshells"), lids, bottles, trays, tumblers, and disposable cutlery.

Description : The name of plastic polymer from which combs, toys, bowls etc., can be made, is (1) Polyurethane (2) Polystyrene (3) Metallic polysulphides (4) Teflon

Last Answer : Polystyrene

Description : Which of the following is not a thermoplastic material? (A) Epoxy polymer (B) PVC (C) Polystyrene (D) Polythene

Last Answer : (A) Epoxy polymer

Description : Which of the following is used as non-stick coating for cooking utensils? (1) Perspex (2)Styrofoam (3) Polystyrene (4)Teflon

Last Answer : Teflon

Description : Pick out the wrong statement. (A) Polystyrene is a thermoplastic polymer (B) Protein is a natural polymer (C) Neoprene is a natural rubber (D) Polythene is a copolymer, while SBR is a homopolymer

Last Answer : (C) Neoprene is a natural rubber

Description : Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Last Answer : (B) Thermosetting

Description : Which of the following is used as no coating for Cooking utensils? (1) Perspex (2) Styrofoam (3) Polystyrene (4) (4)Teflon

Last Answer : (4)Teflon Explanation: The non-stick coating used mainly for coating cooking utensils is made using PTFE (polytetrafluoroethylene) that is also known by the name Teflon. Teflon is an inert polymer ... containing substances wet it and it has one of the lowest coefficients of friction of any solid.

Description : Non sulphonated hard bakelites are not used for making (A) Ion-exchange resins (B) Fountain pen barrels (C) Formica table tops (D) Combs

Last Answer : (A) Ion-exchange resins

Description : Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is ... has poor weldability (D) Reinforced plastics are made from both thermoplastic as well as thermosetting plastics

Last Answer : (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making

Description : Thermocol (expanded polystyrene) is not used for (A) Low temperature thermal insulation as in refrigerator and air conditioners (B) Acoustic control and ceiling for building (C) High temperature thermal insulation in furnaces (D) Packing of delicate electronic gadgets

Last Answer : (C) High temperature thermal insulation in furnaces

Description : If Planters is concerned that acquiring a taste for its new product, honey -roasted macadamia nuts, takes time, it should use __________ packaging. A)family B)multiple C)tamper-resistant D)unlabeled E)transparent

Last Answer : B)multiple

Description : Hi. I have such a problem, we have thin walls and since there is a built-in HUP in the northern wall, only 10 cm of masonry remains behind it and a room follows. The wall in this place is ... contents except for the clock, or HUPs where polystyrene was all over the door, is there a rule? Thanks

Last Answer : It is not advisable to play with gas, so I would not rely on lay advice. Try to contact the gas provider or the supplier that built the HUP. It had to be according to the project and therefore according to the valid standard. But it's definitely not okay. :)

Description : A polymer is use for making combs, name the polymer.

Last Answer : Ans : Baklite 

Description : Write the polymer of phenol and formaldehyde that is used for making combs.

Last Answer : Ans: Bakelite, (a) Phenol (b) Formaldehyde 

Description : Which one among the following polymers is used for making bullet-proof material? (1) Polyvinyl chloride (2) Polystyrene (3) Polyethylene (4) Polyamide

Last Answer : (3) Polyethylene Explanation: A bullet-proof material is made of polyethylene. It is a higher grade of the plastic found in Tupperware.

Description : The plastic material commonly used for making gear wheels is – (1) Polyesters (2) Nylons (3) Bakelit (4) Polystyrene

Last Answer : (2) Nylons Explanation: Popular materials for plastic gears are acetal resins such as DELRIN, Duracon M90; nylon resins such as ZYTEL, NYLATRON, MC901 and acetal copolymers such as ... vary with regard to strength, rigidity, dimensional stability, lubrication requirements, moisture absorption, etc.

Description : The plastic material commonly used for making gear wheels is (1) Polyesters (2) Nylons (3) Bakelit (4) Polystyrene

Last Answer : Nylons

Description : How Triple lamintaed bags are effective for medicine & pharma API packaging?

Last Answer : Triple laminated bag medicine, which is made form a lot of chemical, prevents them from getting spoiled and keeps the medicine safe, also form sunlight

Description : Monel alloy is (A) The costliest of all the alloys of nickel (B) Not suitable for making kitchen utensils (C) Used for making steam valves and turbine blades as it resists steam attack at high temperature (D) Not used in cast and wrought forms

Last Answer : (C) Used for making steam valves and turbine blades as it resists steam attack at high temperature

Description : __________ polymer is used for making unbreakable crockery. (A) Thermoplastic (B) Melamine (C) Addition (D) None of these

Last Answer : (B) Melamine

Description : When you are making a high potential test on a piece of repaired electrical machinery, a rise in leakage current indicates ____________. A. good insulation B. bad insulation C. high insulation power factor D. a high slot discharge factor

Last Answer : Answer: B

Description : The synthetic plastic used for making insulation cover in electrical wires is ________. a ) Bakelite b)melamine c)Polyvinyl Chloride d)Poly styrene

Last Answer : c)Polyvinyl Chloride

Description : Polycondensation reaction of polymerisation (A) Does not produce linear polymers (B) Produces only thermoplastic material (C) Produces epoxy polymers (D) Does not need any catalyst

Last Answer : (C) Produces epoxy polymers

Description : Silicone is a/an (A) Monomer (B) Inorganic polymer (C) Thermoplastic material (D) A natural polymer

Last Answer : (B) Inorganic polymer

Description : Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Last Answer : (A) Thermoplastic

Description : Poly Vinyl Chloride (P.V.C.) is a __________ material. (A) Thermosetting (B) Thermoplastic (C) Fibrous (D) Chemically active

Last Answer : (B) Thermoplastic

Description : If the rear window of the vehicle is made of covered by or treated with any material that makes the window non transparent Florida Law requires your vehicle to have what?

Last Answer : Need answer

Description : In which of the following industries is mica used as a raw material? (a) Electrical (b) Iron and steel (c) Toys (d) Glass and pottery

Last Answer : Ans:(a)

Description : What is happening When light passes through a transparent material it's direction is visually changed slightly?

Last Answer : That is called "refraction", and it is related to the fact thatlight travels slower in some materials than in others.

Description : When making brownies, how do you prevent them from sticking to the pan?

Last Answer : Butter or Pam

Description : Electrical insulation is classed by the _____________. A. International Association of Electrical Manufacturers B. approximate operating voltage and current expected C. U.S. Coast Guard D. temperature stability of the manufacturing material(s)

Last Answer : Answer: D

Description : Name one gaseous and one liquid electrical insulation material. 

Last Answer : i) Gaseous insulating material : 1. Air 2. Nitrogen 3. Hydrogen 4. SF6 ii) liquid insulating material: 1. Transformer oil 2. Capacitor oil 3. Cable oil 4. Pyranol 5. Savotal 6. Savol 7. Vegetable oil 8. Silicon liquids 

Description : Write any two properties of good electrical insulation material. 

Last Answer : Electrical Properties of insulating material:-  1. It should have high resistance. 2. It should have high breakdown voltage. 3. It should have high dielectric strength. 4. It should have low dielectric loss. 5. It should have low dielectric constant. 

Description : German silver used for making utensils is an alloy of – (1) Copper, silver, nickel (2) Copper, zinc, nickel (3) copper, zinc, aluminium (4) copper, nickel, aluminium

Last Answer : (2) Copper, zinc, nickel Explanation: Nickel silver, also known as German silver, Argentan, new silver, nickel brass, albata, alpacca, or electrum, is a copper alloy with nickel and often ... to its development by 19th-century German metalworkers in imitation of the Chinese alloy known as paktong.

Description : German silver used for making utensils is an alloy of (1) copper, silver, nickel (2) copper, zinc, nickel (3) copper, zinc, aluminium (4) copper, nickel, aluminium

Last Answer : copper, zinc, nickel

Description : The material which can be deformed permanently by heat and pressure is called a (1) thermoset (2) thermoplastic (3) chemical compound (4) polymer

Last Answer : (1) thermoset Explanation: A thermosetting polymer, resin, or plastic, often called a thermoset, is a polymer that is irreversibly hardened by curing from a soft solid or viscous liquid prepolymer or resin.

Description : The material which can be deformed permanently by heat and pressure is called a: (1) Thermoplastic (2) Thermoset (3) Chemical compound (4) Polymer

Last Answer : (2) Thermoset Explanation: Thermoset materials are those materials that are made by polymers joined together by chemical bonds, acquiring a highly cross linked polymer structure. They cannot melt.

Description : Compound is, A. Very accurate compression material B. Thermoplastic material

Last Answer : B. Thermoplastic material

Description : Which of the following statement is false? (1) Polystyrene was discovered in 1839 by Edward Simon (2) It is used for making plastics and CD cases (3) It is not biodegradable (4) None of these 

Last Answer : None of these

Description : Where can I find vintage mens goody combs?

Last Answer : here is a large list. I did look through some of the links. There are too many to list for specifics.

Description : Do rabbits use combs? -Riddles

Last Answer : No, they use hare brushes.

Description : Is Sean Puffy Combs bisexual?

Last Answer : no

Description : Are switchblade combs illegal?

Last Answer : What is the answer ?

Description : Non-stick cooking utensils are coated with which metal? -Do You Know?

Last Answer : Teflon In scientific terms its called polytetrafluoroethylene

Description : Non-stick cooking utensils are coated with which metal?

Last Answer : Teflon

Description : Non-stick cooking utensils are coated with which metal?

Last Answer : Teflon

Description : The non-stick coating on pan and other cooking utensils is made from __________. a) rayon b)Teflon c)melamine d)PVC

Last Answer : b)Teflon

Description : What material is most often used for the outer covering of coaxial cables? A. PVC B. Teflon C. PE D. Polystyrene

Last Answer : A. PVC

Description : Bakelite (phenol-formaldehyde) resin cannot be used as (A) Decorative paint (B) Decorative laminates (C) Electrical insulation (D) Glass reinforced plastics

Last Answer : (A) Decorative paint