Which of the following is generally considered as opaque surface
towards radiations?
(A) Gases
(B) Solids
(C) Liquids
(D) Both (B) and (C)
Description : Kopp's rule is used to calculate the heat capacity of (A) Solids (B) Liquids (C) Gases (D) All (A), (B) & (C)
Last Answer : (A) Solids
Description : What can liquids and gases do that solids can not?
Last Answer : Need answer
Description : What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?
Last Answer : B. A solute and a solvent
Description : Which statement is false? (a) Many alkanes are soluble in water. (b) All alkanes have a lower density than water. (c) At room temperature some alkanes are liquids, some solids, some gases. (d) All alkanes burn
Last Answer : Many alkanes are soluble in water
Description : Why do gases expand faster than liquids and solids?
Last Answer : Because the particles of gases are widely disturbed i.e. their particles are far apart from each other and they free to move. Other
Description : Hydrometer is used to determine (A) Specific gravity of liquids (B) Specific gravity of solids (C) Specific gravity of gases (D) Relative humidity
Last Answer : Answer: Option A
Description : Which of the following have the highest thermal conductivities? a. liquids b. gases c. metals d. solids other than metals
Last Answer : metals
Description : For gases, the thermal conductivity increases with temperature rise. For liquids, with increase in concentration, its thermal conductivity generally (A) Decreases (B) Increases (C) Remains unchanged (D) Increases exponentially
Last Answer : (A) Decreases
Description : Coulomb friction is a.Friction between solids and liquids b.Friction between electrically charged bodies c.Friction between lubricated surface d.Friction between dry surfaces e.Friction between bodies having relative motion
Last Answer : d. Friction between dry surfaces
Description : The process by which fine solids is removed from liquids is termed as (A) Decantation (B) Flocculation (C) Sedimentation (D) Classification
Last Answer : (C) Sedimentation
Description : __________ are mixed using ribbon blenders. (A) Lumpy solids and low viscosity liquids (B) Dry powders (C) High viscosity liquids (D) Thick pastes
Last Answer : (B) Dry powders
Description : Cyclones are used primarily for separating (A) Solids (B) Solids from fluids (C) Liquids (D) Solids from solids
Last Answer : (B) Solids from fluids
Description : Hydrometer measures the specific gravity of liquids based on the principles of buoyancy. Pycnometer is used to measure the specific gravity of (A) Powder & granular solids (B) Liquids (C) Low melting point semi-solids (D) All 'a', 'b' & 'c
Last Answer : (D) All 'a', 'b' & 'c
Description : Diaphragm pumps are used to transport (A) Solids (B) Liquids (C) Fluids (D) Slurries
Last Answer : (D) Slurries
Description : Particulate' air pollutants are finely divided solids and liquids. Which of the following is not a ‘particulate’? (A) Dust & mists (B) Smoke & fumes (C) Photochemical smog & soot (D) None of these
Last Answer : (D) None of these
Description : In reactions involving solids and liquids (where change in volume is negligible), the heat of reaction at constant pressure as compared to that at constant volume is (A) More (B) Less (C) Same (D) Unpredictable; depends on the particular reaction
Last Answer : (C) Same
Description : Halitosis and a sour taste in the mouth are signs and symptoms associated most directly with a) esophageal diverticula. Because the diverticula may retain decomposed food, halitosis and a sour ... as heartburn, regurgitation, and dysphagia in many patients while at least 50% are asymptomatic.
Last Answer : a) esophageal diverticula. Because the diverticula may retain decomposed food, halitosis and a sour taste in the mouth are frequent complaints.
Description : 04. All the gases are considered to have compressible flow and all the liquids are considered to have incompressible flow. A) Correct B) Incorrect
Last Answer : A
Description : What connections do you have between the reading and your Mixing Solids and Liquids investigation?
Last Answer : well reading is more diffrent then sold and liquid
Description : What is the speed of particles in liquids compared to solids ?
Last Answer : Liquid particles have a higher velocity than solids.
Description : How did you separate the solids from the liquids?
Last Answer : Solids can often be removed from a liquid by filtering theliquid, or by settling, where solids either settle to the bottom orfloat to the top.
Description : What seismic waves can travel through solids and liquids?
Last Answer : What is the answer ?
Description : Speed of sound is greater in solids than in liquids?
Last Answer : – Because the solids have high elasticity
Description : A fractionating column is a glass apparatus used to (a) Separate magnetic solids from nonmagnetic solids (b) Separate a mixture in water (c) Separate two or more liquids (d) Extract oils from vegetable matter
Last Answer : Ans:(c)
Description : Which of the following statements is not true about triacylglycerols? (a) When solids and semisolids at room temperature, they are called fats. (b) When liquids at room temperature, they are ... low melting points are composed of saturated fatty acids, causing them to be liquids at room temperature
Last Answer : Triacylglycerols with low melting points are composed of saturated fatty acids, causing them to be liquids at room temperature
Description : What is the advantage of flash pasteurization? a. It Doesn't Get As Hot b. It Is Faster c. It Is Also Used For Solids, Not Just Liquids d. It Also Sterilizes The Liquid
Last Answer : b. It Is Faster
Description : Coulomb friction is the friction between (A) Bodies having relative motion (B) Two dry surfaces (C) Two lubricated surfaces (D) Solids and liquids
Last Answer : (A) Bodies having relative motion
Description : Solids and liquids have (a) one value of specific heat (ft) two values of specific heat (c) three values of specific heat (d) no value of specific heat (e) one value under some conditions and two values under other conditions.
Last Answer : Answer : a
Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation
Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion
Description : Increase in temperature, in general results in the (A) Decrease in the viscosities of both liquids & gases (B) Increase in the viscosities of both liquids & gases (C) Increase in the viscosity of ... decrease in that of gases (D) Decrease in the viscosity of liquids and increase in that of gases
Last Answer : (D) Decrease in the viscosity of liquids and increase in that of gases
Description : A ray of white light strikes the surface of an object. If all the colours are reflected, the surface would appear (1) Black (2) White (3) Grey (4) Opaque
Last Answer : (2) White Explanation: Objects do not have any colour of their own. When light hits a surface, some of it is absorbed and some of it is reflected. The light that is reflected is ... appear white when they reflect all the wavelengths; they appear black when they absorb all visible wavelengths.
Description : “Pop off” of a porcelain veneer from the under the lying gold crown is due to:** A. Too thick application of pure gold surface conditioner B. Contamination at the porcelain metal interface C. Under firing the opaque layer D. All of the above
Last Answer : B. Contamination at the porcelain metal interface
Description : Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available ... very high (D) One of the liquid components has very high affinity towards the solvent
Last Answer : (D) One of the liquid components has very high affinity towards the solvent
Description : Turbidity of water is an indication of the presence of (A) Suspended inorganic matter (B) Dissolved solids (C) Floating solids (D) Dissolved gases
Last Answer : (A) Suspended inorganic matter
Description : Removal of __________ is accomplished by aeration of water. (A) Dissolved gases (B) Suspended solids (C) Dissolved solids (D) None of these
Last Answer : (A) Dissolved gases
Description : The diffusivity, DAB (for component A diffusing in B) is equal to the diffusivity DBA (for component B diffusing in A) for a binary mixture of (A) Newtonian liquids (B) Non-Newtonian liquids (C) Ideal gases (D) Real gases
Last Answer : (C) Ideal gases
Description : In case of non-ideal gases and liquids, the molal diffusivity (A) Varies inversely as the pressure (B) Varies directly as the pressure (C) Is independent of pressure (D) Is equal to the volumetric diffusivity
Last Answer : (C) Is independent of pressure
Description : With increase in temperature, the solubility of gases in liquids, at fixed pressure (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B), depends on the system
Last Answer : (B) Decreases
Description : Two liquids manometer is used for measuring small pressure differences in (A) Liquids (B) Gases (C) Mixture of hydrocarbons (D) None of these
Last Answer : (A) Liquids
Description : A differential pressure cell is used for (A) Measuring small pressure difference in gases (B) Measuring small pressure difference in liquids (C) Remote recording of pressure difference (D) Measuring the difference of the impact & the static pressure
Last Answer : (C) Remote recording of pressure difference
Description : Hot wire anemometer is used to measure the (A) Velocity of liquids (B) Temperature of liquids (C) Velocity of gases (D) Pressure of liquids
Last Answer : (C) Velocity of gases
Description : Identification of pipelines carrying different liquids and gases is done by the __________ of the pipe. (A) Diameter (B) Colour (C) Altitude (D) None of these
Last Answer : (B) Colour
Description : Fugacity is a measure of the (A) Escaping tendencies of the same substance in different phases of a system (B) Relative volatility of a mixture of two miscible liquids (C) Behaviour of ideal gases (D) None of these
Last Answer : (A) Escaping tendencies of the same substance in different phases of a system
Description : In liquids and gases the current is due to the motion a. negative charges b. positive charges c. both negative and positive charges d. neutral particles
Last Answer : c. both negative and positive charges
Description : Which one of the following statements is correct? (A) During the day, earth reflects solar radiation (B) During the day, earth reflects both solar radiations the emission from its surface (C) During the night, earth emits radiation from its surface (D) All of these
Last Answer : Answer: Option D
Description : Mixing of plastic solids is generally facilitated by (A) Dispersion (B) Mastication (C) Kneading (D) None of these
Last Answer : (C) Kneading
Description : Some substances are good conductor of electricity in both the solid and liquid states. These substances are generally-------? A. ionic substances B. metallic substances (Answer) C. molecular solids D. covalent network solids
Last Answer : B. metallic substances (Answer)
Description : What is a Mechanical mixture made up of solids and gases?
Description : Discuss the effect of pressure and temperature on the adsorption of gases on solids
Last Answer : Ans: Effect of pressure : By the increase of temp., extent of adsorption decreases uniformly for physisorption but for chemisorption initially increases then decreases.
Description : Sound waves do not travel through _______. a) solids b)gases c)liquid d)vacuum
Last Answer : d)vacuum