Ceramic articles melt into liquid at a temperature of about

1 Answer

Answer :

1073 to 1273K.

Related questions

Description : Cracking of ceramic articles can be controlled by non-clay materials like

Last Answer : flint/quartz.

Description : What is the effect of heating ceramic articles during manufacture?

Last Answer : On heating ceramic materials to about 1073K to 1273K, they melt into a glass like liquid, which fills the pores between individual clay particles and strengthens their contact points. On cooling, the material becomes glossy and has shining & smooth finish.

Description : How can cracking of ceramic articles be controlled?

Last Answer : Cracking of ceramic articles can be controlled if non-clay materials like flint and quartz are added to the mixture.

Description : What are the characteristics of ceramic articles?

Last Answer : Ceramic articles are brittle, porous, heat resistant (withstand high temperature) and non- corrosive to chemicals.

Description : What are the merits / advantages of glazing ceramic articles?

Last Answer : a) Glazing plugs the pores present in the baked ceramic articles. b) Glazing provides a smooth, attractive look and bright glossy surface to the articles. c) Glazing provides desired colour to the articles.

Description : Explain glazing of ceramic articles.

Last Answer : Glazing is achieved by addition of suitable fillers. It is fired again to create coloured, smooth surface.

Description : How are the pores in ceramic articles plugged?sc

Last Answer : The pores in the baked ceramic articles are plugged by a process of glazing.

Description : What is the melting point of ice or at what temperature does ice melt into water ?

Last Answer : : The melting point of Berber becomes ice water at a temperature of 0 সেল C or 0 সেল C.

Description : Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter ... the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Last Answer : (A) Acrylic

Description : Which temperature does the gallium melt ? -Science

Last Answer : 29.76 °C or 85.6°F is the melting point of Gallium The Boiling Point is 4044°F (2229°C).

Description : At which temperature does the gallium melt ? -Science

Last Answer : The element gallium possesses some of the re- quisite properties for a heat-transfer liquid. It is a unique material, having a low melting point and a high boiling point. Pure gallium melts at 29.78°C, and suitable alloying will produce a metal which melts below room temperature.

Description : At what temperature does silver melt? A. 275 °C B. 327 °C C.961.8 °C (Answer)

Last Answer : C.961.8 °C (Answer)

Description : What can melt rocks without changing temperature when their confining pressure?

Last Answer : Need answer

Description : How long does it take to melt an ice cube with table salt in room temperature?

Last Answer : It depends on the size of the ice cube and amount of table salt.

Description : Viscosity of a polymer solution or melt (A) Decreases with increase in molecular weight (B) Decreases with increase in temperature (C) Increases with increase in temperature (D) Does not vary with temperature rise

Last Answer : (C) Increases with increase in temperature

Description : Addition of stabiliser during PVC manufacture is done to (A) Improve its impact strength (B) Improve its elasticity (C) Reduce the melt viscosity & glass transition temperature (D) Prevent its thermal degradation

Last Answer : (D) Prevent its thermal degradation

Description : Lower temperature and large excess of ammonia in urea melt (A) Increases biuret formation (B) Decreases biuret formation (C) Is undesirable (D) Does not effect biuret formation

Last Answer : (B) Decreases biuret formation

Description : Solid type cables are considered unreliable beyond 66 kV because (a) insulation may melt due to higher temperature (b) skin effect dominates on the conductor (c) of corona loss between conductor and sheath material (d) there is a danger of breakdown of insulation due to the presence of voids

Last Answer : (d) there is a danger of breakdown of insulation due to the presence of voids

Description : Does the CHI GF1001 Ceramic Ionic Flat Iron have different temperature settings?

Last Answer : No, this particular flat iron only offers an on/off switch with one general temperature setting for all.

Description : Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Last Answer : (A) Higher melting points

Description : Ceramic compounds as compared to metallic compounds (A) Crystallise faster (B) Resist greater tensile stress at room temperature (C) Have higher melting temperature (D) Are better conductor of electricity at higher temperature

Last Answer : Option C

Description : No compensation will be payable in case a) For loss or damage caused by the fault or negligence of the sender b) Article is prohibited by transmission by post c) For damage in case in ... article are liquid or perishable articles or articles of and exceptionally fragile nature. d) All the above

Last Answer : d) All the above

Description : Some rocks are pushed deeper into the Earth. As these rocks experience greater heat and pressure, what type of rock will they turn into if they do not melt?

Last Answer : Metamorphic

Description : Is it possible to get a jeweler to melt your gold into a necklace?

Last Answer : Yes it's totally fine, but make sure that the jeweler you are contacting is good and can reach the bare minimum capabilities. In short a professional jeweler.

Description : What type of rocks can melt into lava or magma?

Last Answer : Need answer

Description : When rocks melt into magma it releases?

Last Answer : Gases

Description : When a rock is subjected to high enough amounts of heat and pressure to change it but not melt it it change into which type of rock?

Last Answer : Feel Free to Answer

Description : Which method, vapor phase oxidation or direct-melt process, transforms deposited material into a solid glass preform by heating the porous material without melting?

Last Answer : Vapor phase oxidation.

Description : A child accidentally drops a square ceramic tile. It breaks into smaller pieces as shown in Figure P. To avoid a scolding, she plans to compose a mural of broken pieces to gift to her mother. Which figure out of the given options could she make?

Last Answer :

Description : Will Everclear (alcohol) cause vegetarian gelcaps to melt?

Last Answer : What the hell is a “really strong herbal concoction”? And while I suspect that the answer will be “yes”, it’s easy enough to test. Just drop a gelcap into a bit of everclear and see what happens.

Description : How does snow melt when its below freezing?

Last Answer : Actually, the snow isn't melting, it is sublimating. Sublimation is the process of a solid (snow) going directly to the gas phase (water vapor). This is as opposed to solid (snow), to liquid (water ... After all, there is a limit to all of our tinkering with nature.) Does this answer your question?

Description : The element which is purified by melt- ing?

Last Answer : Lead

Description : Does ice melt faster in humid conditions (high relative humidity), or low?

Last Answer : Humid air is denser then dry air. The more air molecules that there are surrounding the ice, the more heat exchange will take place over dry air (given a constant air and surface temperature and over a ... air will draw heat from the ice and cause it to melt more quickly than less dense dry air.

Description : What alloy is created when you melt and mix all metals on the periodic table in equal portions?

Last Answer : You can’t mix them all, their melting points are vastly different.

Description : Does cottage cheese melt?

Last Answer : Not really, it still stays pretty curdy in Lasagne. I suppose you could puree it first or mash it down more.

Description : Why doesn't human fat melt?

Last Answer : answer:I'm just guessing. I assume the fat in our bodies needs to be heated above 105ish degrees. When we sit in the sun we still maintain a 98.6ish temperature unless we are experiencing heat stroke. ... likely to be at around 400 to 450 degrees. In a pan it still is quite a high temperature.

Description : So what wave length would you need for a industrial microwave to melt gold?

Last Answer : You aren’t supposed to put gold in a microwave. You run the risk of bad things.

Description : How do you melt colors on a photo print?

Last Answer : You can do that while the print is still wet, and spray with a solvent to make the ink run. I don;t know which solvent, you’ll have to experiment a bit.

Description : How many British thermal units would it take melt the core of the planet Mars?

Last Answer : All I know is that my ex-husband could blow Terra-Wind that would melt Mars.

Description : How can I melt the hearts of the check-writers at EasyJet?

Last Answer : The 1st Ferengi Rule of acquisition clearly states: “Once you have their money, never give it back.” But since they are most likely not full Ferengi, you might have luck by kidnapping one of their children and demanding ransom.

Description : I want to make the ultimate melt in the mouth chocolate truffles as a present for someone. Any help and tips PLEASE.

Last Answer : Use a really high quality chocolate like Scharffen Berger or Valrhona..

Description : Is it safe to leave aluminum foil in the oven during a self-cleaning cycle? Will the aluminum ignite, burn, or melt?

Last Answer : I am not sure what would happen.I think the melting point of aluminum foil is a much higher temperature than your oven can get. I like to stay away from the stove.I am much happier that way. :)

Description : Would Jelly Beans melt if you shipped them?

Last Answer : No – you can have jelly beans delivered from amazon.com so they must not.

Description : Is a propane "ice melt" torch effective for melting ice on a driveway?

Last Answer : No. But..I HAVE hooked up the garden hose to the hot water outlet in the garage that my washing machine hooks up to, and have hosed down icy areas with hot water to melt the ice. ;-)

Description : Can a t-shirt made out of PET melt in the dryer?

Last Answer : I would not trust anything made of plastic in a hot dryer. this could be dangerous.

Description : Why does the snow melt first around the trees?

Last Answer : Maybe there could be melted ice/snow (water) running down the tree, making that circle?

Description : Baking chocolate bar. Can I sweeten it with splenda if I melt it?

Last Answer : I don’t see why not.

Description : What ice melt will be effective on my driveway at very low temperatures, while doing very little damge to my lawn.

Last Answer : Kitty litter works but it is expensive.

Description : Is it possible to melt a computer ?

Last Answer : Yes.

Description : I have an old Rolex watch - how can I find where to sell it for the most money? would a jewler melt it? I believe its silver.

Last Answer : I would imagine you'd get more money for selling the watch than you'd get for the value of the metal. But finding someone to buy your old watch takes time or a low asking price. Still, it ... it appraised at whatever store is interested in buying it. Sorry I can't recommend who these people are.