When a rock is subjected to high enough amounts of heat and pressure to change it but not melt it it change into which type of rock?

When a rock is subjected to high enough amounts of heat and pressure to change it but not melt it it change into which type of rock?
by

1 Answer

Answer :

Feel Free to Answer
by

Related questions

Some rocks are pushed deeper into the Earth. As these rocks experience greater heat and pressure, what type of rock will they turn into if they do not melt?

Description : Some rocks are pushed deeper into the Earth. As these rocks experience greater heat and pressure, what type of rock will they turn into if they do not melt?

Last Answer : Metamorphic

What is the rock material deposited by glaciers as they melt and retreated?

Description : What is the rock material deposited by glaciers as they melt and retreated?

Last Answer : They are known as moraines.

The snow on the mountains does not melt all at once when it is heated by the sun because _____ A. It becomes very hard It B. It reflects most of the heat from the sun C. It has a low specific heat capacity D. It has a high latent heat of fusion

Description : The snow on the mountains does not melt all at once when it is heated by the sun because _____ A. It becomes very hard It B. It reflects most of the heat from the sun C. It has a low specific heat capacity D. It has a high latent heat of fusion

Last Answer : ANSWER: B

The snow on the mountains does NOT melt all at once when it is heated by the sum because: (1) It becomes very hard (2) It reflects most of the heat from the sum (3) it has a low specific heat capacity (4) it has a high latent heat of fusion

Description : The snow on the mountains does NOT melt all at once when it is heated by the sum because: (1) It becomes very hard (2) It reflects most of the heat from the sum (3) it has a low specific heat capacity (4) it has a high latent heat of fusion

Last Answer : (2) It reflects most of the heat from the sum Explanation: Newly formed snow reflects about 90 per cent of the sunlight that falls upon it. This means that the sun is powerless to melt clean snow. And when ... on a spring day because of the sun's heat. It melts because of the warm air from the sea.

The snow on the mountains does NOT melt all at once when it is heated by the sum because: (1) It becomes very hard (2) It reflects most of the heat from the sum (3) it has a low specific heat capacity (4) it has a high latent heat of fusion

Description : The snow on the mountains does NOT melt all at once when it is heated by the sum because: (1) It becomes very hard (2) It reflects most of the heat from the sum (3) it has a low specific heat capacity (4) it has a high latent heat of fusion

Last Answer : (2) It reflects most of the heat from the sum Explanation: Newly formed snow reflects about 90 per cent of the sunlight that falls upon it. This means that the sun is powerless to melt clean snow. And when ... on a spring day because of the sun's heat. It melts because of the warm air from the sea.

The snow on the mountains does NOT melt all at once when it is heated by the sun because: (1) it becomes very hard (2) it reflects most of the heat from the sun (3) it has a low specific heat capacity (4) it has a high latent heat of fusion

Description : The snow on the mountains does NOT melt all at once when it is heated by the sun because: (1) it becomes very hard (2) it reflects most of the heat from the sun (3) it has a low specific heat capacity (4) it has a high latent heat of fusion

Last Answer : it reflects most of the heat from the sun

Which of the following is not an assurance that the auditors give to the parties who rely on the financial statements? a. Auditors know how the amounts and disclosures in the financial statements were produced. b. Auditors gathered enough evidence to provide a reasonable basis for forming an opinionc. Auditors give assurance that thefinancial statements are accurate.d. If the evidence allows the auditors to doso, auditors give assurance in the form ofopinion, as to whether the financialstatements taken as a whole are fairlypresented in conformity with GAAP

Description : Which of the following is not an assurance that the auditors give to the parties who rely on the financial statements? a. Auditors know how the amounts and disclosures in the financial statements ... as to whether the financial statements taken as a whole are fairly presented in conformity with GAAP

Last Answer : Auditors give assurance that the financial statements are accurate

Which of the following is not an assurance that the auditors give to the parties who rely on the financial statements? a. Auditors give assurance that the financial statements are accurate. b. Auditors know how the amounts and disclosures in the financial statements were produced. c. Auditors gathered enough evidence to provide a reasonable basis for forming an opinion. d. If the evidence allows the auditors to doso, auditors give assurance in the form ofopinion, as to whether the financialstatements taken as a whole are fairlypresented in conformity with GAAP

Description : Which of the following is not an assurance that the auditors give to the parties who rely on the financial statements? a. Auditors give assurance that the financial statements are accurate. b. ... as to whether the financial statements taken as a whole are fairly presented in conformity with GAAP

Last Answer : Auditors give assurance that the financial statements are accurate

Name the following: (a) A metal, which is preserved in kerosene. (b) A lustrous coloured non-metal. (c) A metal, which can melt while kept on palm. (d) A metal, which is a poor conductor of heat. -Chemistry

Description : Name the following: (a) A metal, which is preserved in kerosene. (b) A lustrous coloured non-metal. (c) A metal, which can melt while kept on palm. (d) A metal, which is a poor conductor of heat. -Chemistry

Last Answer : a) Sodium is preserved in kerosene. (b) Iodine is lustrous coloured non-metal. (c) Gallium. ‘ (d) Lead.

In which region of earths interior does the heat increase to the point that rocks can begin to melt?

Description : In which region of earths interior does the heat increase to the point that rocks can begin to melt?

Last Answer : asthenosphere

How many joules of heat are necessary to melt 500 g of ice at it's freezing point?

Description : How many joules of heat are necessary to melt 500 g of ice at it's freezing point?

Last Answer : Heat required to melt 1 g of ice at 0°C is approximately 80 cal . This is also called latent heat of fusion of ice.

Why does ice coverfed in sawdust ct melt quickly? (1) Sawdust does not allow the air to touch the ice (2) The water is absorbed by sawdust (3) Sawdust is a bad conductor of heat (4) Sawdust is good conductor of heat

Description : Why does ice coverfed in sawdust ct melt quickly? (1) Sawdust does not allow the air to touch the ice (2) The water is absorbed by sawdust (3) Sawdust is a bad conductor of heat (4) Sawdust is good conductor of heat

Last Answer : (3) Sawdust is a bad conductor of heat Explanation: Ice needs to absorb heat energy to melt and become water (called latent heat of fusion). Since saw-dust is a poor conductor of heat, it takes ... required heat energy. This allows ice to remain in solid state for more time when packed in saw dust.

What is a calorie? w) amount of heat required to raise one gram of water one degree Celsius. x) amount of work required to move one gram of water by one centimeter. y) amount of heat required to melt ice. z) amount of heat required to raise one gram of water one degree Fahrenheit

Description : What is a calorie? w) amount of heat required to raise one gram of water one degree Celsius. x) amount of work required to move one gram of water by one centimeter. y) amount of heat required to melt ice. z) amount of heat required to raise one gram of water one degree Fahrenheit

Last Answer : ANSWER: W -- AMOUNT OF HEAT REQUIRED TO RAISE ONE GRAM OF WATER ONE DEGREE CELSIUS

The energy required to melt one mole of a solid at its melting point is called one of the following. w) the molar heat of fusion x) the molar hear of vaporization y) the molar heat of capacity z) the melting point

Description : The energy required to melt one mole of a solid at its melting point is called one of the following. w) the molar heat of fusion x) the molar hear of vaporization y) the molar heat of capacity z) the melting point

Last Answer : ANSWER: W -- THE MOLAR HEAT OF FUSION

Why does ice covered in sawdust not melt quickly ? (1) Sawdust does not allow the air to touch the ice (2) The water is absorbed by sawdust (3) Sawdust is a bad conductor of heat (4) Sawdust is good conductor of heat

Description : Why does ice covered in sawdust not melt quickly ? (1) Sawdust does not allow the air to touch the ice (2) The water is absorbed by sawdust (3) Sawdust is a bad conductor of heat (4) Sawdust is good conductor of heat

Last Answer : Sawdust is a bad conductor of heat

Which kind of rock is formed from a change due to pressure and heat? a) Mineral b) Igneous c) Sedimentary d) Metamorphic

Description : Which kind of rock is formed from a change due to pressure and heat? a) Mineral b) Igneous c) Sedimentary d) Metamorphic

Last Answer : d) Metamorphic

Ice is slippery when a man walks on it because a.Increase of pressure causes it to melt b.Ice is brittle c.There is no friction d.It is very chill e.Its surface is smooth

Description : Ice is slippery when a man walks on it because a.Increase of pressure causes it to melt b.Ice is brittle c.There is no friction d.It is very chill e.Its surface is smooth

Last Answer : a. Increase of pressure causes it to melt

How much LPG low pressure gas is required to melt 300kg in a furnace?

Description : How much LPG low pressure gas is required to melt 300kg in a furnace?

Last Answer : Aluminium

What can melt rocks without changing temperature when their confining pressure?

Description : What can melt rocks without changing temperature when their confining pressure?

Last Answer : Need answer

Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low boiling products are prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose

Is propane gas buning to melt gold a physical change or a chemical change?

Description : Is propane gas buning to melt gold a physical change or a chemical change?

Last Answer : Need answer

What changes will happen to a bowl of ice and water kept at exactly zero degree Celsius? (1) All ice will melt (2) All water will become ice (3) No change will happen (4) Only some ice will melt

Description : What changes will happen to a bowl of ice and water kept at exactly zero degree Celsius? (1) All ice will melt (2) All water will become ice (3) No change will happen (4) Only some ice will melt

Last Answer : (3) No change will happen Explanation: Fresh water cooled to zero (0) degree Celsius and subjected to additional loss of heat energy normally will freeze. A mixture of fresh water and ice ... the usual freezing point while remaining liquid. Such cloud droplets are composed of super cooled water.

What changes will happen to a bowl of ice and water kept at exactly zero degree Celsius ? (1) All ice will melt (2) All water will become ice (3) No change will happen (4) Only some ice will melt

Description : What changes will happen to a bowl of ice and water kept at exactly zero degree Celsius ? (1) All ice will melt (2) All water will become ice (3) No change will happen (4) Only some ice will melt

Last Answer : No change will happen

When a gas or a liquid is subjected to an increased pressure, the substance contracts, the bulk strain is defined as A. final volume ⁄ original volume B. final pressure ⁄ original pressureC. change in volume ⁄ original volumeD. original volume ⁄ change in volume

Description : When a gas or a liquid is subjected to an increased pressure, the substance contracts, the bulk strain is defined as A. final volume ⁄ original volume B. final pressure ⁄ original pressure C. change in volume ⁄ original volume D. original volume ⁄ change in volume

Last Answer : change in volume ⁄ original volume

"When a system in equilibrium is subjected to a change in temperature, pressure or concentration, the equilibrium is displaced in a direction which tends to undo the effect of the change." This is called the (A) Le-Chatelier principle (B) Kopp's rule (C) Law of corresponding state (D) Arrhenius hypothesis

Description : "When a system in equilibrium is subjected to a change in temperature, pressure or concentration, the equilibrium is displaced in a direction which tends to undo the effect of the change." This is ... Chatelier principle (B) Kopp's rule (C) Law of corresponding state (D) Arrhenius hypothesis

Last Answer : (A) Le-Chatelier principle

What apparatus is used to heat small amounts of liquid?

Description : What apparatus is used to heat small amounts of liquid?

Last Answer : The mole

What can be used to heat large amounts of liquid?

Description : What can be used to heat large amounts of liquid?

Last Answer : Feel Free to Answer

Addition oxcessive amounts of heat to a lake is referred to as - (1) Refrigeration effect (2) Green House effect (3) Thermal pollution (4) Heat Bloom

Description : Addition oxcessive amounts of heat to a lake is referred to as - (1) Refrigeration effect (2) Green House effect (3) Thermal pollution (4) Heat Bloom

Last Answer : (3) Thermal pollution Explanation: Thermal pollution is defined as the addition of excess of undesirable heat to water thereby making it harmful to man, animal or aquatic life. A common ... . The change in ambient temperature of water decreases oxygen supply and affects ecosystem com-position.

Addition oxcessive amounts of heat to a lake is referred to as : (1) Refrigeration effect (2) Green House effect (3) Thermal pollution (4) Heat Bloom

Description : Addition oxcessive amounts of heat to a lake is referred to as : (1) Refrigeration effect (2) Green House effect (3) Thermal pollution (4) Heat Bloom

Last Answer : Thermal pollution

What type of rocks can melt into lava or magma?

Description : What type of rocks can melt into lava or magma?

Last Answer : Need answer

What type of rock is formed when a rock is changed by heat or pressure?

Description : What type of rock is formed when a rock is changed by heat or pressure?

Last Answer : Metamorphic rock is created when sedimentary rock or igneous rock is heated and pressurized.

How amounts of change can be the same but percents of change can be different?

Description : How amounts of change can be the same but percents of change can be different?

Last Answer : They are same because because the number would always be sameand the difference is they both are not with each other.Please voteme please click on it is use full for you.Thanks.plese

How can two amounts of change can be the same but the percents of change can be different.?

Description : How can two amounts of change can be the same but the percents of change can be different.?

Last Answer : By two amounts of change I assume mean absolute amounts.Assume the following:Quantity 1 begins at 6 and changes to 3. The absolute value ofthe change is 3 and the percent change is 50%Quantity 2 begins at 30 and changes to 27. The absolute value ofthe change is 3 and the percent change is 10%

How can two amounts of change can be the same but the percents of change can be different.?

Description : How can two amounts of change can be the same but the percents of change can be different.?

Last Answer : By two amounts of change I assume mean absolute amounts.Assume the following:Quantity 1 begins at 6 and changes to 3. The absolute value ofthe change is 3 and the percent change is 50%Quantity 2 begins at 30 and changes to 27. The absolute value ofthe change is 3 and the percent change is 10%

Does ice melt faster in humid conditions (high relative humidity), or low?

Description : Does ice melt faster in humid conditions (high relative humidity), or low?

Last Answer : Humid air is denser then dry air. The more air molecules that there are surrounding the ice, the more heat exchange will take place over dry air (given a constant air and surface temperature and over a ... air will draw heat from the ice and cause it to melt more quickly than less dense dry air.

Metals of high purity are obtained by zone refining. Impurities are more soluble in melt in pure metal.

Description : Metals of high purity are obtained by zone refining. Impurities are more soluble in melt in pure metal.

Last Answer : Metals of high purity are obtained by zone refining. Impurities are more soluble in melt in pure ... Statement-1 is false but Statement -2 is true

An AC generator operating in parallel loses its excitation without tripping the circuit breaker. This will __________. A. not affect the faulty generator due to the compensation of the other generators B. cause the slip rings to melt C. cause a low voltage differential to develop between the armature and the bus D. cause high currents to be induced in the field windings

Description : An AC generator operating in parallel loses its excitation without tripping the circuit breaker. This will __________. A. not affect the faulty generator due to the compensation of the other generators B. ... between the armature and the bus D. cause high currents to be induced in the field windings

Last Answer : Answer: D

Pick out the wrong statement. (A) A soft magnetic material should have high permeability and small area of hysteresis loop (B) Poisson's ratio of high melting point metals is more than unity (C) Solders generally melt at less than 185°C (D) Steel produced by B.O.F process is ideally suited for manufacturing flat product

Description : Pick out the wrong statement. (A) A soft magnetic material should have high permeability and small area of hysteresis loop (B) Poisson's ratio of high melting point metals is more than unity (C) ... less than 185°C (D) Steel produced by B.O.F process is ideally suited for manufacturing flat product

Last Answer : Option B

When limestone is subjected to high temperature and pressure known as Metamorphism, it results in the formation of? a. Granite b. Quicklime c. Sandstone d. Marble

Description : When limestone is subjected to high temperature and pressure known as Metamorphism, it results in the formation of? a. Granite b. Quicklime c. Sandstone d. Marble

Last Answer : d. Marble

Tin based white metals are used, where bearings are subjected to (A) High pressure & load (B) Low pressure & load (C) High temperature (D) Large surface wear

Description : Tin based white metals are used, where bearings are subjected to (A) High pressure & load (B) Low pressure & load (C) High temperature (D) Large surface wear

Last Answer : (A) High pressure & load

What type of synchro is used in systems requiring large amounts of power and a high degree of accuracy?

Description : What type of synchro is used in systems requiring large amounts of power and a high degree of accuracy?

Last Answer : A control synchro.

Which of the following statements concerning analytical procedures is true? a. Analytical procedures are more efficient, but not more effective, than tests of details of transactions. b. Analytical procedures used as risk assessment procedures use data aggregated at a high level. c. Analytical procedures can replace tests of controls in gathering audit evidence to support the assessed level of control risk. d. Analytical procedures usually involve comparisons of ratios developed from recorded amounts with ratios developed by management

Description : Which of the following statements concerning analytical procedures is true? a. Analytical procedures are more efficient, but not more effective, than tests of details of transactions. ... usually involve comparisons of ratios developed from recorded amounts with ratios developed by management

Last Answer : Analytical procedures used as risk assessment procedures use data aggregated at a high level.

Solid type cables are considered unreliable beyond 66 kV because (a) insulation may melt due to higher temperature (b) skin effect dominates on the conductor (c) of corona loss between conductor and sheath material (d) there is a danger of breakdown of insulation due to the presence of voids

Description : Solid type cables are considered unreliable beyond 66 kV because (a) insulation may melt due to higher temperature (b) skin effect dominates on the conductor (c) of corona loss between conductor and sheath material (d) there is a danger of breakdown of insulation due to the presence of voids

Last Answer : (d) there is a danger of breakdown of insulation due to the presence of voids

Which of the following terms refers most precisely to a localized skin infection of a single hair follicle? a) Furuncle Furuncles occur anywhere on the body, but are most prevalent in areas subjected to irritation, pressure friction, and excessive perspiration, such as the back of the neck, the axillae, or the buttocks.

Description : Which of the following terms refers most precisely to a localized skin infection of a single hair follicle? a) Furuncle Furuncles occur anywhere on the body, but are most prevalent in areas ... Comedone. Comedones are the primary lesions of acne, caused by sebum blockage in the hair follicle.

Last Answer : a) Furuncle Furuncles occur anywhere on the body, but are most prevalent in areas subjected to irritation, pressure friction, and excessive perspiration, such as the back of the neck, the axillae, or the buttocks.

What is the melting point of ice or at what temperature does ice melt into water ?

Description : What is the melting point of ice or at what temperature does ice melt into water ?

Last Answer : : The melting point of Berber becomes ice water at a temperature of 0 সেল C or 0 সেল C.

Is it possible to get a jeweler to melt your gold into a necklace?

Description : Is it possible to get a jeweler to melt your gold into a necklace?

Last Answer : Yes it's totally fine, but make sure that the jeweler you are contacting is good and can reach the bare minimum capabilities. In short a professional jeweler.

When rocks melt into magma it releases?

Description : When rocks melt into magma it releases?

Last Answer : Gases

Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter polymer melt to harden into filaments. Melt spinning is not used in case of the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Description : Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter ... the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Last Answer : (A) Acrylic

Ceramic articles melt into liquid at a temperature of about

Description : Ceramic articles melt into liquid at a temperature of about

Last Answer : 1073 to 1273K.