Dimensions of relative density are A. mass × length-3 B. mass × length3 C. It has no dimensions, since it's a ratio of two densities D. length3 × mass-1

Question

Dimensions of relative density are A. mass × length-3 B. mass × length3 C. It has no dimensions, since it's a ratio of two densities D. length3 × mass-1

Dimensions of relative density are

A. mass × length-3

B. mass × length3

C. It has no dimensions, since it's a ratio of two densities

D. length3 × mass-1

asked Nov 27, 2021 by shubhhw

1 Answer

Related questions

The density of lead is 12 grams per cm3. A lead brick has a mass of 1.5 kilograms. Its dimensions are 10 cm by 5 cm by 4 cm. Is it: w) More than 75% hollow x) Between 50 and 75% hollow y) Between 25 and 50% hollow z) Between 0 and 25% hollow

Description : The density of lead is 12 grams per cm3. A lead brick has a mass of 1.5 kilograms. Its dimensions are 10 cm by 5 cm by 4 cm. Is it: w) More than 75% hollow x) Between 50 and 75% hollow y) Between 25 and 50% hollow z) Between 0 and 25% hollow

Last Answer : ANSWER: Y -- BETWEEN 25 AND 50% HOLLOW

How do water relative densities as a solid and a liquid differ from most other substances?

Description : How do water relative densities as a solid and a liquid differ from most other substances?

Last Answer : The solid phase of water (ice) is less dense than its liquid phase, therefore ice floats on liquid water. For other substances, the solid phase is most dense and it sinks in its liquid.

Calculate the electric field when the conductivity is 20 units, electron density is 2.4 units and the velocity is 10m/s. Assume the conduction and convection current densities are same. a) 2.4 b) 4.8 c) 3.6 d) 1.2

Description : Calculate the electric field when the conductivity is 20 units, electron density is 2.4 units and the velocity is 10m/s. Assume the conduction and convection current densities are same. a) 2.4 b) 4.8 c) 3.6 d) 1.2

Last Answer : d) 1.2

The terminal velocity of a solid spherical particle falling through a stationary fluid mass in the Stoke's law range is proportional to the (A) Inverse of fluid viscosity (B) Square of particle size (C) Difference in the densities of the particle & fluid (D) All (A), (B) and (C)

Description : The terminal velocity of a solid spherical particle falling through a stationary fluid mass in the Stoke's law range is proportional to the (A) Inverse of fluid viscosity (B) Square of particle size (C) Difference in the densities of the particle & fluid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The vapour densities of two gases are in the ratio of `1 : 3 ` . Their molecular masses are in the ratio of : -

Description : The vapour densities of two gases are in the ratio of `1 : 3 ` . Their molecular masses are in the ratio of : -

Last Answer : The vapour densities of two gases are in the ratio of `1 : 3 ` . Their molecular masses are in the ratio of : - A. ` ... `1 : 2` C. `2 : 3` D. `3 : 1`

Fill in the blanks- _____and _____ densities should be found out, in order to get a better insight into the human-land ratio. -Geography

Description : Fill in the blanks- _____and _____ densities should be found out, in order to get a better insight into the human-land ratio. -Geography

Last Answer : (c) Physiological and Agricultural

Laser radiation is: w) monochromatic x) directed in a narrow beam y) produced with large power densities z) all of the above

Description : Laser radiation is: w) monochromatic x) directed in a narrow beam y) produced with large power densities z) all of the above

Last Answer : ANSWER: Z -- ALL OF THE ABOVE

Under which of the following conditions does the behavior of a real gas resemble that of an ideal gas? Is it: w) under all conditions of temperature and pressure x) only at very high pressure y) only when the gas is near condensation z) only at low densities when the molecules are relatively far apart

Description : Under which of the following conditions does the behavior of a real gas resemble that of an ideal gas? Is it: w) under all conditions of temperature and pressure x) only at very high pressure ... when the gas is near condensation z) only at low densities when the molecules are relatively far apart

Last Answer : ANSWER: Z -- ONLY AT LOW DENSITIES WHEN THE MOLECULES ARE RELATIVELY FAR APART

Using force, length and time as fundamental quantities, the dimensions of mass would be a.FL-2T+2 b.FL-1T+2 c.FL-1T+1 d.107 dynes e.FL-2T+1

Description : Using force, length and time as fundamental quantities, the dimensions of mass would be a.FL-2T+2 b.FL-1T+2 c.FL-1T+1 d.107 dynes e.FL-2T+1

Last Answer : b. FL-1T+2

What is the unit of relative density? (1) kg/m (2) kg/m² (3) kg/m³ (4) It has no unit

Description : What is the unit of relative density? (1) kg/m (2) kg/m² (3) kg/m³ (4) It has no unit

Last Answer : (4) It has no unit Explanation: Relative density is the ratio of the density (mass of a unit volume) of a substance to the density of a given reference material. So, it is a dimensionless quantity and has no unit.

What is the unit of relative density? (1) kg/m (2) kg/m2 (3) kg/m3 (4) It has no unit

Description : What is the unit of relative density? (1) kg/m (2) kg/m2 (3) kg/m3 (4) It has no unit

Last Answer : It has no unit

The density of the material in the shape of a cube is determined by measuring three sides of the cube and its mass. 1f the relative errors

Description : The density of the material in the shape of a cube is determined by measuring three sides of the cube and its mass. 1f the relative errors

Last Answer : The density of the material in the shape of a cube is determined by measuring three sides of the cube and its mass. 1f ... B) 6% (C) 2.5° (D) 3.5%

The ratio of the change in energy in the form of the heat  a. relative density  b. specific heat  c. specific gravity  d. none of the above

Description : The ratio of the change in energy in the form of the heat  a. relative density  b. specific heat  c. specific gravity  d. none of the above

Last Answer : specific heat

Consider the following statements: 1. Relative density is a meaningful parameter for all types of soils 2. Relative density is a meaningful parameter only for cohesion soils. 3. Relative density is a better indicator of the denseness of an in-situ granular soil deposit than the void ratio. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. Relative density is a meaningful parameter for all types of soils 2. Relative density is a meaningful parameter only for cohesion soils. 3. Relative density is a better indicator of the denseness of an in ... , 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (d) 1 & 3 only

The ratio of intensity of magnetisation to the magnetisation force is known as (a) flux density (b) susceptibility (c) relative permeability (d) none of the above

Description : The ratio of intensity of magnetisation to the magnetisation force is known as (a) flux density (b) susceptibility (c) relative permeability (d) none of the above

Last Answer : (b) susceptibility

If relative frequency, abundance and density values are 6, 5 and 4, respec tively, then summed dominance ratio is a). 15 b). 5 c). 7.5 d). 3

Description : If relative frequency, abundance and density values are 6, 5 and 4, respec tively, then summed dominance ratio is a). 15 b). 5 c). 7.5 d). 3

Last Answer : b). 5

Which of the following is not correct? (1) Ammeter measures the strength of electric current. (2) Lactometer measures the relative density of milk. (3) Rain gauge measures rain fall (4) Hygrometer measures sound under water.

Description : Which of the following is not correct? (1) Ammeter measures the strength of electric current. (2) Lactometer measures the relative density of milk. (3) Rain gauge measures rain fall (4) Hygrometer measures sound under water.

Last Answer : (4) Hygrometer measures sound under water. Explanation: A hygrometer is a weather instrument used to measure the amount of humidity in the atmosphere

The range of a particular Rotameter can be increased by (A) Use of floats of different densities (B) No means (C) Increasing the diameter of the float (D) Decreasing the diameter of the float

Description : The range of a particular Rotameter can be increased by (A) Use of floats of different densities (B) No means (C) Increasing the diameter of the float (D) Decreasing the diameter of the float

Last Answer : (A) Use of floats of different densities

Relative humidity is a) the ratio of water vapour in the air compared to the total amount water vapour the air could contain at a given temperature b) equal to the dry bulb temperature divided by the wet bulb temperature c) equal to the wet bulb temperature divided by the dry bulb temperature d) the ratio of the mass of water vapour divided by the mass of dry air e) the ratio of the mass of water vapour divided by the mass of wet air

Description : Relative humidity is a) the ratio of water vapour in the air compared to the total amount water vapour the air could contain at a given temperature b) equal to the dry bulb temperature divided by the wet bulb ... of dry air e) the ratio of the mass of water vapour divided by the mass of wet air

Last Answer : ANSWER : A

What is meant by the relative atomic mass of carbon 12 ?

Description : What is meant by the relative atomic mass of carbon 12 ?

Last Answer : : Atomic mass of carbon 12 means: - From the application of the number Avogadro, we know that 6.02 10 ^ 23 is the actual mass of 23 atoms = its molecular mass ( M). So , the actual mass ... of carbon- 12 atoms. Another notable difference is that there is a unit of atomic mass but no unit of mass.

What is relative mass ?

Description : What is relative mass ?

Last Answer : The relative mass of an object is the mass measured by a stationary observer from a contextual structure.

The mass of water vapour per unit volume of air is known as - (1) relative humidity (2) specific humidity (3) absolute humidity (4) variable humidity

Description : The mass of water vapour per unit volume of air is known as - (1) relative humidity (2) specific humidity (3) absolute humidity (4) variable humidity

Last Answer : (3) absolute humidity Explanation: Absolute humidity is the measure of water vapor (moisture) in the air, regardless of temperature. It is expressed as grams of moisture per cubic meter of air (g/m3).

An object with a mass of 5 kilograms is a distance of 5 meters above the surface of the earth. If the acceleration due to gravity is 10 meters per second squared, the potential energy of the object relative to the surface of the earth is: w) 10 joules x) 20 joules y) 100 joules z) 250 joules e) none of the above

Description : An object with a mass of 5 kilograms is a distance of 5 meters above the surface of the earth. If the acceleration due to gravity is 10 meters per second squared, the potential energy of the object relative to the ... is: w) 10 joules x) 20 joules y) 100 joules z) 250 joules e) none of the above

Last Answer : ANSWER: Z -- 250 JOULES

Dimensions of current density

Last Answer : Dimensions for current density is I L^(-2) Current density means flow of electrons per unit area

Relative humidity is expressed as – (1) Grams (2) Kilograms (3) Percentage (4) Ratio

Description : Relative humidity is expressed as – (1) Grams (2) Kilograms (3) Percentage (4) Ratio

Last Answer : (3) Percentage Explanation: Relative humidity is the amount of moisture in the air compared to what the air can "hold" at that temperature. It signifies the mass of water vapour present in the air ... of the mass that would be present in an equal volume of saturated air at the same temperature.

Amount of water vapour (gaseous) in a given volume of air (cubic metre) is known as: (1) Mixing ratio (2) Relative humidity (3) Absolute humidity (4) Specific humidity

Description : Amount of water vapour (gaseous) in a given volume of air (cubic metre) is known as: (1) Mixing ratio (2) Relative humidity (3) Absolute humidity (4) Specific humidity

Last Answer : (3) Absolute humidity Explanation: The relative humidity of air at a given temperature is the ratio of mass of water vapour actually present in a certain volume of air to the mass of water vapour required to saturate the same volume of air at the same temperature, multiplied by 100.

Amount of water vapour in a unit volume (Cubic metre) of air is called: (1) Mixed ratio (2) relative humidity (3) absolute humidity (4) specific humidity

Description : Amount of water vapour in a unit volume (Cubic metre) of air is called: (1) Mixed ratio (2) relative humidity (3) absolute humidity (4) specific humidity

Last Answer : (3) absolute humidity Explanation: Absolute humidity is the measure of water vapor (moisture) in the air, regardless of temperature. It is expressed as grams of moisture per cubic meter of air (g/m3).

Relative humidity is expressed as (1) Grams (2) Kilograms (3) Percentage (4) Ratio

Description : Relative humidity is expressed as (1) Grams (2) Kilograms (3) Percentage (4) Ratio

Last Answer : Percentage

Amount of water vapour (gaseous) in a given volume of air (cubic metre) is known as: (1) Mixing ratio (2) Relative humidity (3) Absolute humidity (4) Specific humidity

Description : Amount of water vapour (gaseous) in a given volume of air (cubic metre) is known as: (1) Mixing ratio (2) Relative humidity (3) Absolute humidity (4) Specific humidity

Last Answer : Absolute humidity

Back to the gall bladder. My relative has four tiny incisions; one of them is weeping. It has been 4 days since the surgery. Is that normal?

Description : Back to the gall bladder. My relative has four tiny incisions; one of them is weeping. It has been 4 days since the surgery. Is that normal?

Last Answer : answer:It is normal for it to weep. It isn’t normal or healthy for him to keep playing with the incisions. I hope he doesn’t make you put a cone on him!

Tabling process used for separating two materials of different densities by passing the dilute pulp over a table/deck, which is inclined from the horizontal surface at an angle of about (A) 1 to 2° (B) 2 to 5° (C) 5 to 10° (D) 10 to 15°

Description : Tabling process used for separating two materials of different densities by passing the dilute pulp over a table/deck, which is inclined from the horizontal surface at an angle of about (A) 1 to 2° (B) 2 to 5° (C) 5 to 10° (D) 10 to 15°

Last Answer : (B) 2 to 5°

When a beam of light travels through media of two different densities, if theangle of incidence isgreater than the critical angle, _______ occurs. A) reflection B) refraction C) incidence D) criticism

Description : When a beam of light travels through media of two different densities, if theangle of incidence isgreater than the critical angle, _______ occurs. A) reflection B) refraction C) incidence D) criticism

Last Answer : reflection

Which are the regions with the highest and lowest densities respectively? -Do You Know?