The range of a particular Rotameter can be increased by (A) Use of floats of different densities (B) No means (C) Increasing the diameter of the float (D) Decreasing the diameter of the float

The range of a particular Rotameter can be increased by
(A) Use of floats of different densities
(B) No means
(C) Increasing the diameter of the float
(D) Decreasing the diameter of the float
by

1 Answer

Answer :

(A) Use of floats of different densities
by

Related questions

The shock absorbing capacity of bolts can be increased by a) Increasing the shank diameter b) Decreasing the length of shank portion of bolt c) Increase the shank diameter and decreasing the length of shank d) None of the listed

Description : The shock absorbing capacity of bolts can be increased by a) Increasing the shank diameter b) Decreasing the length of shank portion of bolt c) Increase the shank diameter and decreasing the length of shank d) None of the listed

Last Answer : d) None of the listed

The shock absorbing capacity of a bolt can be increased by (A) Increasing stress in shank (B) Increasing stress in core diameter of threads (C) Decreasing stress in shank (D) Decreasing stress in core diameter of threads

Description : The shock absorbing capacity of a bolt can be increased by (A) Increasing stress in shank (B) Increasing stress in core diameter of threads (C) Decreasing stress in shank (D) Decreasing stress in core diameter of threads

Last Answer : (A) Increasing stress in shank

The sensitivity of a bubble tube can be increased by (A) Increasing the diameter of the tube (B) Decreasing the length of bubble (C) Increasing the viscosity of liquid (D) Decreasing the radius of curvature of tube

Description : The sensitivity of a bubble tube can be increased by (A) Increasing the diameter of the tube (B) Decreasing the length of bubble (C) Increasing the viscosity of liquid (D) Decreasing the radius of curvature of tube

Last Answer : (A) Increasing the diameter of the tube

In case of a Rotameter, the density of the float material is __________ that of the liquid it replaces. (A) More than (B) Less than (C) Equal to (D) Either (A) or (B)

Description : In case of a Rotameter, the density of the float material is __________ that of the liquid it replaces. (A) More than (B) Less than (C) Equal to (D) Either (A) or (B)

Last Answer : (A) More than

Drag force on the float of a Rotameter is (where Q = flow rate of the) (A) ∝ Q (B) ∝ √Q (C) ∝ Q2 (D) Constant

Description : Drag force on the float of a Rotameter is (where Q = flow rate of the) (A) ∝ Q (B) ∝ √Q (C) ∝ Q2 (D) Constant

Last Answer : (D) Constant

Which of the following relationship is valid for the equilibrium position of the float in a Rotameter? (Where, Df= Drag force on the float Bf = Buoyant force on the float Wf = Weight of the float). (A) Df + Bf = Wf (B) Df = Bf + Wf (C) Df + Bf + Wf =0 (D) None of these

Description : Which of the following relationship is valid for the equilibrium position of the float in a Rotameter? (Where, Df= Drag force on the float Bf = Buoyant force on the float Wf = Weight of the float). (A) Df + Bf = Wf (B) Df = Bf + Wf (C) Df + Bf + Wf =0 (D) None of these

Last Answer : (A) Df + Bf = Wf

the fluid flow rate increases, the float of the Rotameter (A) Rises in the tube (B) Rotates at higher speed (C) Rotates at lower speed (D) Drops down in the tube

Description : the fluid flow rate increases, the float of the Rotameter (A) Rises in the tube (B) Rotates at higher speed (C) Rotates at lower speed (D) Drops down in the tube

Last Answer : Option A

A piece of wetted wood just floats in water. When placed in an oil of specific gravity 0.75, it will a.Float with upside down b.Sink c.Float for sometime and then sink d.Float with 3/4 of volume above the liquid surface e.Float with 1/4 of volume above the liquid level

Description : A piece of wetted wood just floats in water. When placed in an oil of specific gravity 0.75, it will a.Float with upside down b.Sink c.Float for sometime and then sink d.Float with 3/4 of volume above the liquid surface e.Float with 1/4 of volume above the liquid level

Last Answer : b. Sink

A steel ball floats on mercury because (a) mercury does not allow any metallic ball to sink in it (b) mercury is also a metal in the liquid form (c) the density of mercury is higher than that of steel (d) a steel ball can be made to float on any liquid by suitable adjustment

Description : A steel ball floats on mercury because (a) mercury does not allow any metallic ball to sink in it (b) mercury is also a metal in the liquid form (c) the density of mercury is higher than that of steel (d) a steel ball can be made to float on any liquid by suitable adjustment

Last Answer : Ans:(c)

An example of unsteady non uniform flow is the flow of liquid under pressure through a (A) Tapering pipe at constant flow rate (B) Tapering pipe at either decreasing or increasing flow rate (C) Long pipeline of constant diameter (D) None of these

Description : An example of unsteady non uniform flow is the flow of liquid under pressure through a (A) Tapering pipe at constant flow rate (B) Tapering pipe at either decreasing or increasing flow rate (C) Long pipeline of constant diameter (D) None of these

Last Answer : (B) Tapering pipe at either decreasing or increasing flow rate

Azeotropism for ethyl alcohol-water system disappears by (A) Increasing temperature (B) Decreasing pressure (C) Increasing pressure (D) No means

Description : Azeotropism for ethyl alcohol-water system disappears by (A) Increasing temperature (B) Decreasing pressure (C) Increasing pressure (D) No means

Last Answer : (B) Decreasing pressure

The overall mass transfer co-efficient for the absorption of SO2 in air with dilute NaOH solution can be increased substantially by (A) Increasing the gas film co-efficient(B) Increasing the liquid film co-efficient(C) Increasing the total pressure(D) Decreasing the total pressure

Description : The overall mass transfer co-efficient for the absorption of SO2 in air with dilute NaOH solution can be increased substantially by (A) Increasing the gas film co-efficient (B) Increasing the liquid film co-efficient (C) Increasing the total pressure (D) Decreasing the total pressure

Last Answer : (A) Increasing the gas film co-efficient

The emf of a Deniell cell “Zn | Zn2+|| Cu2+| Cu” can be increased by (A) Decreasing the surface area of the electrodes (B) Increasing the concentration of zinc sulphate solution (C) Increasing the surface area of the electrodes (D) Increasing the concentration of copper sulphate solution

Description : The emf of a Deniell cell “Zn | Zn2+|| Cu2+| Cu” can be increased by (A) Decreasing the surface area of the electrodes (B) Increasing the concentration of zinc sulphate solution (C) Increasing the surface area of the electrodes (D) Increasing the concentration of copper sulphate solution

Last Answer : (D) Increasing the concentration of copper sulphate solution

Water flow rate in a pipe of 3.5 metres diameter can be most economically and conveniently measured by a/an (A) Pitot tube (B) Venturimeter (C) Orificemeter (D) Rotameter

Description : Water flow rate in a pipe of 3.5 metres diameter can be most economically and conveniently measured by a/an (A) Pitot tube (B) Venturimeter (C) Orificemeter (D) Rotameter

Last Answer : (A) Pitot tube

If the bond stress developed in a reinforced concrete beam is more than permissible value, it can be brought down by. (a) Increasing the depth of beam (b) Increasing the number of bars. (c) Decreasing the diameter of the bars (d) All of these

Description : If the bond stress developed in a reinforced concrete beam is more than permissible value, it can be brought down by. (a) Increasing the depth of beam (b) Increasing the number of bars. (c) Decreasing the diameter of the bars (d) All of these

Last Answer : (d) All of these

pecific energy requirement of rotary tillers can be reduce by a) Increasing the bite length b) Decreasing depth to diameter ratio c) Both (a) and (b) d) Excessive reduction in total power requirement

Description : pecific energy requirement of rotary tillers can be reduce by a) Increasing the bite length b) Decreasing depth to diameter ratio c) Both (a) and (b) d) Excessive reduction in total power requirement

Last Answer : c) Both (a) and (b)

Keeping other parameters constant brake power of diesel engine can be increased by (a) Decreasing the density of intake air (b) Increasing the temperature of intake air (c) Increasing the pressure of intake air (d) Decreasing the pressure of intake air

Description : Keeping other parameters constant brake power of diesel engine can be increased by (a) Decreasing the density of intake air (b) Increasing the temperature of intake air (c) Increasing the pressure of intake air (d) Decreasing the pressure of intake air

Last Answer : Ans : c

If people's income of a country is denoted in a curved line space that it has increased, then what does it denote? (1) the income is increasing (2) the income is decreasing (3) dissimilarity is decreasing in income distribution (4) dissimilarity in income distribution is increasing

Description : If people's income of a country is denoted in a curved line space that it has increased, then what does it denote? (1) the income is increasing (2) the income is decreasing (3) dissimilarity is decreasing in income distribution (4) dissimilarity in income distribution is increasing

Last Answer : (3) dissimilarity is decreasing in income distribution Explanation: It shows inequality in income distribution. Inequality indices can also be derived directly from the Lorenz curve. Perhaps the most commonly- ... by the Lorenz curve and the perfect equality line to the total area below that line.

Flat footed camels can walk easily in sandy deserts because - (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by increasing the area of the surface in contact (3) pressure on the sand is decreased by decreasing the area of the surface in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Description : Flat footed camels can walk easily in sandy deserts because - (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by ... in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Last Answer : (1) pressure on the sand is decreased by increasing the area of the surface in contact Explanation: Camels have broad, flat, leathery pads with two toes on each foot. When the camel places its foot on ... the animal on loose sand in much the same way that a snowshoe helps a person walk on snow.

Magnifying power of a simple microscope can be increased by ? A. increasing focal length of the lens B. Decreasing focal length of the lens (Answer) C. Lens of large aperture D. lens of short aperture E. None of these

Description : Magnifying power of a simple microscope can be increased by ? A. increasing focal length of the lens B. Decreasing focal length of the lens (Answer) C. Lens of large aperture D. lens of short aperture E. None of these

Last Answer : B. Decreasing focal length of the lens (Answer)

The traction on rear wheels can be increased by increasing a) Weight on rear wheels b) Weight on front wheels c) Decreasing inflation pressure d) Both a and c Ans. d

Description : The traction on rear wheels can be increased by increasing a) Weight on rear wheels b) Weight on front wheels c) Decreasing inflation pressure d) Both a and c Ans. d

Last Answer : ans d

The seed rate can be increased by a) Decreasing the exposure length b) Increasing the exposure length c) Increasing speed d) Decreasing speed Ans. b

Description : The seed rate can be increased by a) Decreasing the exposure length b) Increasing the exposure length c) Increasing speed d) Decreasing speed Ans. b

Last Answer : ans b

Sensitivity of a galvanometer can be increased by a) Increasing the number of turns of the coil b) Decreasing the magnetic field c) Increasing the ratio c ⁄BAN d) Decreasing the area of the coil

Description : Sensitivity of a galvanometer can be increased by a) Increasing the number of turns of the coil b) Decreasing the magnetic field c) Increasing the ratio c ⁄BAN d) Decreasing the area of the coil

Last Answer : a) Increasing the number of turns of the coil

Width of cut of disc plow is increased by a)Increasing disc angle b)Increasing tilt angle c)addition of more weight d)Decreasing disc angle

Description : Width of cut of disc plow is increased by a)Increasing disc angle b)Increasing tilt angle c)addition of more weight d)Decreasing disc angle

Last Answer : a)Increasing disc angle

Flat footed camels can walk easily in sandy deserts because (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by increasing the area of the surface in contact (3) pressure on the sand is decreased by decreasing the area of the surface in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Description : Flat footed camels can walk easily in sandy deserts because (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by increasing ... in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Last Answer : pressure on the sand is decreased by increasing the area of the surface in contact

If people’s income of a country is denoted in a curved line space that it has increased, then what does it denote? (1) the income is increasing (2) the income is decreasing (3) dissimilarity is decreasing in income distribution (4) dissimilarity in income distribution is increasing

Description : If people’s income of a country is denoted in a curved line space that it has increased, then what does it denote? (1) the income is increasing (2) the income is decreasing (3) dissimilarity is decreasing in income distribution (4) dissimilarity in income distribution is increasing

Last Answer :  dissimilarity is decreasing in income distribution

The terminal velocity of a solid spherical particle falling through a stationary fluid mass in the Stoke's law range is proportional to the (A) Inverse of fluid viscosity (B) Square of particle size (C) Difference in the densities of the particle & fluid (D) All (A), (B) and (C)

Description : The terminal velocity of a solid spherical particle falling through a stationary fluid mass in the Stoke's law range is proportional to the (A) Inverse of fluid viscosity (B) Square of particle size (C) Difference in the densities of the particle & fluid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Flow of water in a pipe about 3 metres in diameter can be measured by (A) Orifice plate (B) Venturimeter (C) Rotameter (D) Pitot tube

Description : Flow of water in a pipe about 3 metres in diameter can be measured by (A) Orifice plate (B) Venturimeter (C) Rotameter (D) Pitot tube

Last Answer : Answer: Option D

Adiabatic heating and Adiabatic cooling really means _________ and _________ respectively.  a. raising the temp and lowering the temp  b. maintaining the pressure and changing the temperature  c. decreasing the volume and increasing the pressure  d. lowering the temp and raising the temp

Description : Adiabatic heating and Adiabatic cooling really means _________ and _________ respectively.  a. raising the temp and lowering the temp  b. maintaining the pressure and changing the temperature  c. decreasing the volume and increasing the pressure  d. lowering the temp and raising the temp

Last Answer : raising the temp and lowering the temp

Tower diameter may be decreased by (A) Using higher reflux ratio (B) Use of increased tray spacing (C) Increasing the liquid flow rate (D) Increasing the vapour flow rate

Description : Tower diameter may be decreased by (A) Using higher reflux ratio (B) Use of increased tray spacing (C) Increasing the liquid flow rate (D) Increasing the vapour flow rate

Last Answer : (B) Use of increased tray spacing

The capacity of a centrifugal pump Can be increased by increasing the (A) Impeller diameter or speed (B) Number of pumps and joining them in series (C) Number of pumps and joining them in parallel (D) All (A), (B) and (C)

Description : The capacity of a centrifugal pump Can be increased by increasing the (A) Impeller diameter or speed (B) Number of pumps and joining them in series (C) Number of pumps and joining them in parallel (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

The shock absorbing capacity of a bolt can be increased by (A) Increasing shank diameter (B) Making shank diameter equal to core diameter of threads (C) Using castle nut in place of ordinary hexagonal nut (D) Using a washer

Description : The shock absorbing capacity of a bolt can be increased by (A) Increasing shank diameter (B) Making shank diameter equal to core diameter of threads (C) Using castle nut in place of ordinary hexagonal nut (D) Using a washer

Last Answer : (B) Making shank diameter equal to core diameter of threads

Resilience of a bolt can be increased by increasing its (A) Length (B) Shank diameter (C) Head diameter (D) None of these

Description : Resilience of a bolt can be increased by increasing its (A) Length (B) Shank diameter (C) Head diameter (D) None of these

Last Answer : (A) Length

In a sprayer overlapping can be increased by increasing a) Nozzle diameter b) Pressure c) Discharge d) Height of nozzle Ans. d

Description : In a sprayer overlapping can be increased by increasing a) Nozzle diameter b) Pressure c) Discharge d) Height of nozzle Ans. d

Last Answer : ans d

The penetration of a tandem disc harrow can be increased by a) Increasing tilt angle b) Increasing disc angle c) Increasing disc diameter d) All of the above Ans.c

Description : The penetration of a tandem disc harrow can be increased by a) Increasing tilt angle b) Increasing disc angle c) Increasing disc diameter d) All of the above Ans.c

Last Answer : Ans.c

Rotation of crops is essential (1) For increasing the quantity of minerals. (2) For decreasing the quantity of proteins. (3) For getting different kinds of crops. (4) For increasing fertility of the soil.

Description : Rotation of crops is essential (1) For increasing the quantity of minerals. (2) For decreasing the quantity of proteins. (3) For getting different kinds of crops. (4) For increasing fertility of the soil.

Last Answer : (4) For increasing fertility of the soil. Explanation: Crop rotation is the practice of growing a series of dissimilar/different types of crops in the same area in sequenced seasons. It gives ... the replenishment of nitrogen through the use of green manure in sequence with cereals and other crops.

Rotation of crops is essential : (1) For increasing the quantity of minerals. (2) For decreasing the quantity of proteins. (3) For getting different kinds of crops. (4) For increasing fertility of the soil.

Description : Rotation of crops is essential : (1) For increasing the quantity of minerals. (2) For decreasing the quantity of proteins. (3) For getting different kinds of crops. (4) For increasing fertility of the soil.

Last Answer : For increasing fertility of the soil.

Tabling process used for separating two materials of different densities by passing the dilute pulp over a table/deck, which is inclined from the horizontal surface at an angle of about (A) 1 to 2° (B) 2 to 5° (C) 5 to 10° (D) 10 to 15°

Description : Tabling process used for separating two materials of different densities by passing the dilute pulp over a table/deck, which is inclined from the horizontal surface at an angle of about (A) 1 to 2° (B) 2 to 5° (C) 5 to 10° (D) 10 to 15°

Last Answer : (B) 2 to 5°

If a force greater than that of gravity is used to separate solids & fluidsof different densities, the process is termed as the(A) Sedimentation(B) Flocculation(C) Dispersion(D) Centrifugation

Description : If a force greater than that of gravity is used to separate solids & fluidsof different densities, the process is termed as the (A) Sedimentation (B) Flocculation (C) Dispersion (D) Centrifugation

Last Answer : (D) Centrifugation

Solid particles of different densities are separated by (A) Filters (B) Thickness (C) Cyclones (D) Sorting classifier

Description : Solid particles of different densities are separated by (A) Filters (B) Thickness (C) Cyclones (D) Sorting classifier

Last Answer : (D) Sorting classifier

Conversion achieved in HNO3 synthesis with the use of platinum catalyst is about 95-97%. The rate of formation of nitrogen dioxide from the oxidation of nitric acid is favoured by (A) Decreasing the pressure (B) Decreasing the temperature (C) Increasing the temperature (D) None of these

Description : Conversion achieved in HNO3 synthesis with the use of platinum catalyst is about 95-97%. The rate of formation of nitrogen dioxide from the oxidation of nitric acid is favoured by (A) Decreasing the pressure (B) Decreasing the temperature (C) Increasing the temperature (D) None of these

Last Answer : (C) Increasing the temperature

During size reduction by a jaw crusher, the energy consumed decreases with the (A) Decreasing size of product at constant size of feed (B) Decreasing machine capacity (C) Increasing size of feed at constant reduction ratio (D) None of these

Description : During size reduction by a jaw crusher, the energy consumed decreases with the (A) Decreasing size of product at constant size of feed (B) Decreasing machine capacity (C) Increasing size of feed at constant reduction ratio (D) None of these

Last Answer : (C) Increasing size of feed at constant reduction ratio

The falling rate period in the drying of a solid is characterised by (A) Increase in rate of drying (B) Increasing temperatures both on the surface and within the solid (C) Decreasing temperatures (D) None of these

Description : The falling rate period in the drying of a solid is characterised by (A) Increase in rate of drying (B) Increasing temperatures both on the surface and within the solid (C) Decreasing temperatures (D) None of these

Last Answer : (B) Increasing temperatures both on the surface and within the solid

Heat transfer co-efficient (h1 ) for liquids increases with (A) Increasing temperature (B) Decreasing temperature (C) Decreasing Reynolds number (D) None of these

Description : Heat transfer co-efficient (h1 ) for liquids increases with (A) Increasing temperature (B) Decreasing temperature (C) Decreasing Reynolds number (D) None of these

Last Answer : (A) Increasing temperature

The film co-efficient between condensing vapour and metal wall increases with (A) Increasing temperature of the vapour (B) Decreasing temperature of the vapour (C) Increasing viscosity of the film of condensate (D) Increasing temperature drop

Description : The film co-efficient between condensing vapour and metal wall increases with (A) Increasing temperature of the vapour (B) Decreasing temperature of the vapour (C) Increasing viscosity of the film of condensate (D) Increasing temperature drop

Last Answer : (A) Increasing temperature of the vapour

Air vessel provided in a reciprocating pump is for (A) Increasing the acceleration head (B) Making the friction in pipe uniform (C) Decreasing the acceleration head (D) None of these

Description : Air vessel provided in a reciprocating pump is for (A) Increasing the acceleration head (B) Making the friction in pipe uniform (C) Decreasing the acceleration head (D) None of these

Last Answer : (B) Making the friction in pipe uniform

Unsteady uniform flow is represented by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate

Description : Unsteady uniform flow is represented by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate

Last Answer : (B) Long pipe at decreasing rate

Steady non-uniform flow is exemplified by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate

Description : Steady non-uniform flow is exemplified by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate

Last Answer : (D) Expanding tube at constant rate

Unsteady non-uniform flow is represented by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate

Description : Unsteady non-uniform flow is represented by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate

Last Answer : (C) Expanding tube at increasing rate