What does gases low densities show about the distance between gas particles?

What does gases low densities show about the distance between gas particles?
by

1 Answer

Answer :

A low-density gas would have molecules that are farther apartand fewer in numbers per unit volume.
by
selected by

Related questions

The same volume of all gases is representative of their (A) Specific gravities (B) Densities (C) Gas characteristic constants

Description : The same volume of all gases is representative of their (A) Specific gravities (B) Densities (C) Gas characteristic constants

Last Answer : Option D

The same volume of all gases would represent their  (a) densities  (b) specific weights  (c) molecular weights  (d) gas characteristic constants  (e) specific gravities.

Description : The same volume of all gases would represent their  (a) densities  (b) specific weights  (c) molecular weights  (d) gas characteristic constants  (e) specific gravities.

Last Answer : Answer : c

Solid particles of different densities are separated by (A) Filters (B) Thickness (C) Cyclones (D) Sorting classifier

Description : Solid particles of different densities are separated by (A) Filters (B) Thickness (C) Cyclones (D) Sorting classifier

Last Answer : (D) Sorting classifier

Separation of solid particles based on their densities is called (A) Sizing (B) Sorting (C) Clarification (D) Dispersion

Description : Separation of solid particles based on their densities is called (A) Sizing (B) Sorting (C) Clarification (D) Dispersion

Last Answer : (B) Sorting

Sorting classifiers employing differential settling methods forseparation of particles make use of the differences in their(A) Particle sizes(B) Densities(C) Terminal velocities(D) None of these

Description : Sorting classifiers employing differential settling methods forseparation of particles make use of the differences in their (A) Particle sizes (B) Densities (C) Terminal velocities (D) None of these

Last Answer : (C) Terminal velocities

Separation of particles of various sizes, shapes and densities by allowing them to settle in a fluid is called (A) Classification (B) Froth floatation (C) Thickening (D) Clarification

Description : Separation of particles of various sizes, shapes and densities by allowing them to settle in a fluid is called (A) Classification (B) Froth floatation (C) Thickening (D) Clarification

Last Answer : (A) Classification

The vapour densities of two gases are in the ratio of `1 : 3 ` . Their molecular masses are in the ratio of : -

Description : The vapour densities of two gases are in the ratio of `1 : 3 ` . Their molecular masses are in the ratio of : -

Last Answer : The vapour densities of two gases are in the ratio of `1 : 3 ` . Their molecular masses are in the ratio of : - A. ` ... `1 : 2` C. `2 : 3` D. `3 : 1`

Under which of the following conditions does the behavior of a real gas resemble that of an ideal gas? Is it: w) under all conditions of temperature and pressure x) only at very high pressure y) only when the gas is near condensation z) only at low densities when the molecules are relatively far apart

Description : Under which of the following conditions does the behavior of a real gas resemble that of an ideal gas? Is it: w) under all conditions of temperature and pressure x) only at very high pressure ... when the gas is near condensation z) only at low densities when the molecules are relatively far apart  

Last Answer : ANSWER: Z -- ONLY AT LOW DENSITIES WHEN THE MOLECULES ARE RELATIVELY FAR APART

Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature (C) Electrostatic precipitator is the most efficient dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Description : Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for ... dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Last Answer : (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature

How do gases and particles get trapped in the different layers in an core?

Description : How do gases and particles get trapped in the different layers in an core?

Last Answer : Need answer

In liquids and gases the current is due to the motion a. negative charges b. positive charges c. both negative and positive charges d. neutral particles

Description : In liquids and gases the current is due to the motion a. negative charges b. positive charges c. both negative and positive charges d. neutral particles

Last Answer : c. both negative and positive charges

Fill in the blanks- _____and _____ densities should be found out, in order to get a better insight into the human-land ratio. -Geography

Description : Fill in the blanks- _____and _____ densities should be found out, in order to get a better insight into the human-land ratio. -Geography

Last Answer : (c) Physiological and Agricultural

Which are the regions with the highest and lowest densities respectively? -Do You Know?

Description : Which are the regions with the highest and lowest densities respectively? -Do You Know?

Last Answer : answer:

Which are the regions with the highest and lowest densities respectively? -Do You Know?

Description : Which are the regions with the highest and lowest densities respectively? -Do You Know?

Last Answer : answer:

Which are the regions with the highest and lowest densities respectively? -Do You Know?

Description : Which are the regions with the highest and lowest densities respectively? -Do You Know?

Last Answer : answer:

Which are the regions with the highest and lowest densities respectively? -Do You Know?

Description : Which are the regions with the highest and lowest densities respectively? -Do You Know?

Last Answer : answer:

Which are the regions with the highest and lowest densities respectively? -Do You Know?

Description : Which are the regions with the highest and lowest densities respectively? -Do You Know?

Last Answer : answer:

Which are the regions with the highest and lowest densities respectively? -Do You Know?

Description : Which are the regions with the highest and lowest densities respectively? -Do You Know?

Last Answer : answer:

What Molecular orbital interactions are not possible because the atomic orbitals have overlapping electron densities.?

Description : What Molecular orbital interactions are not possible because the atomic orbitals have overlapping electron densities.?

Last Answer : Need answer

How do you separate substances with different densities?

Description : How do you separate substances with different densities?

Last Answer : Feel Free to Answer

How do water relative densities as a solid and a liquid differ from most other substances?

Description : How do water relative densities as a solid and a liquid differ from most other substances?

Last Answer : The solid phase of water (ice) is less dense than its liquid phase, therefore ice floats on liquid water. For other substances, the solid phase is most dense and it sinks in its liquid.

RETICULAR DENSITIES SEEN IN THE RIGHT LOWER LUNG?

Description : RETICULAR DENSITIES SEEN IN THE RIGHT LOWER LUNG?

Last Answer : Any cavitary lesion - Lucency (darkened area) within the lung parenchyma, with or without irregular margins that might be surrounded by an area of airspace consolidation or infiltrates, or by nodular or ... (reticular) densities, or both. The walls surrounding the lucent area can be thick or thin.

Cherapunji receives more rainfall than Shillong because: (a) the former is nearer to the sea (b) the air of different densities and temperature tends to converge towards Cherapunjl from different direction during the rainy season (c) Cherapunji is located on the windward side (d) convective precipitation brings more rain at Cherapunji

Description : Cherapunji receives more rainfall than Shillong because: (a) the former is nearer to the sea (b) the air of different densities and temperature tends to converge towards Cherapunjl from ... Cherapunji is located on the windward side (d) convective precipitation brings more rain at Cherapunji

Last Answer : Ans: (b)

Heavy metals got their name because compared to other atoms they have - (1) Higher densities (2) Higher atomic masses (3) Higher atomic numbers (4) Higher atomic radii

Description : Heavy metals got their name because compared to other atoms they have - (1) Higher densities (2) Higher atomic masses (3) Higher atomic numbers (4) Higher atomic radii

Last Answer : (2) Higher atomic masses Explanation: Arsenic, beryllium, cadmium, chromium, lead, manganese, mercury, nickel, and selenium are some of the metals called 'heavy' because of their high relative atomic ... and can cause damage or death in animals, humans, and plants even at very low concentrations.

Which are the regions with the highest and lowest densities respectively?

Description : Which are the regions with the highest and lowest densities respectively?

Last Answer : Europe and Oceania

Which are the regions with the highest and lowest densities respectively?

Description : Which are the regions with the highest and lowest densities respectively?

Last Answer : Europe and Oceania

. In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Description : . In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Last Answer : (D) Hardness, rigidity & brittleness

Tabling process used for separating two materials of different densities by passing the dilute pulp over a table/deck, which is inclined from the horizontal surface at an angle of about (A) 1 to 2° (B) 2 to 5° (C) 5 to 10° (D) 10 to 15°

Description : Tabling process used for separating two materials of different densities by passing the dilute pulp over a table/deck, which is inclined from the horizontal surface at an angle of about (A) 1 to 2° (B) 2 to 5° (C) 5 to 10° (D) 10 to 15°

Last Answer : (B) 2 to 5°

If a force greater than that of gravity is used to separate solids & fluidsof different densities, the process is termed as the(A) Sedimentation(B) Flocculation(C) Dispersion(D) Centrifugation

Description : If a force greater than that of gravity is used to separate solids & fluidsof different densities, the process is termed as the (A) Sedimentation (B) Flocculation (C) Dispersion (D) Centrifugation

Last Answer : (D) Centrifugation

Dimensions of relative density are A. mass × length-3 B. mass × length3 C. It has no dimensions, since it's a ratio of two densities D. length3 × mass-1

Description : Dimensions of relative density are A. mass × length-3 B. mass × length3 C. It has no dimensions, since it's a ratio of two densities D. length3 × mass-1

Last Answer :  It has no dimensions, since it's a ratio of two densities

The following are true about the sodium channels: a. they are made up of polypeptide chains b. have the highest densities at the nodes of Ranvier c. open in response to depolarization d. remain open as long as depolarization is maintained

Description : The following are true about the sodium channels: a. they are made up of polypeptide chains b. have the highest densities at the nodes of Ranvier c. open in response to depolarization d. remain open as long as depolarization is maintained

Last Answer : have the highest densities at the nodes of Ranvier

When a beam of light travels through media of two different densities, if theangle of incidence isgreater than the critical angle, _______ occurs. A) reflection B) refraction C) incidence D) criticism

Description : When a beam of light travels through media of two different densities, if theangle of incidence isgreater than the critical angle, _______ occurs. A) reflection B) refraction C) incidence D) criticism

Last Answer : reflection

Both the conduction and displacement current densities coexist in which medium? a) Only conductors in air b) Only dielectrics in air c) Conductors placed in any dielectric medium d) Both the densities can never coexist

Description : Both the conduction and displacement current densities coexist in which medium? a) Only conductors in air b) Only dielectrics in air c) Conductors placed in any dielectric medium d) Both the densities can never coexist

Last Answer : c) Conductors placed in any dielectric medium

Calculate the electric field when the conductivity is 20 units, electron density is 2.4 units and the velocity is 10m/s. Assume the conduction and convection current densities are same. a) 2.4 b) 4.8 c) 3.6 d) 1.2

Description : Calculate the electric field when the conductivity is 20 units, electron density is 2.4 units and the velocity is 10m/s. Assume the conduction and convection current densities are same. a) 2.4 b) 4.8 c) 3.6 d) 1.2

Last Answer : d) 1.2

The total charge of a surface with densities 1,2,...,10 is a) 11 b) 33 c) 55 d) 77

Description : The total charge of a surface with densities 1,2,...,10 is a) 11 b) 33 c) 55 d) 77

Last Answer : c) 55

The terminal velocity of a solid spherical particle falling through a stationary fluid mass in the Stoke's law range is proportional to the (A) Inverse of fluid viscosity (B) Square of particle size (C) Difference in the densities of the particle & fluid (D) All (A), (B) and (C)

Description : The terminal velocity of a solid spherical particle falling through a stationary fluid mass in the Stoke's law range is proportional to the (A) Inverse of fluid viscosity (B) Square of particle size (C) Difference in the densities of the particle & fluid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The range of a particular Rotameter can be increased by (A) Use of floats of different densities (B) No means (C) Increasing the diameter of the float (D) Decreasing the diameter of the float

Description : The range of a particular Rotameter can be increased by (A) Use of floats of different densities (B) No means (C) Increasing the diameter of the float (D) Decreasing the diameter of the float

Last Answer : (A) Use of floats of different densities

Electrostatic separation of minerals from each other is based on their differences in the following property. (A) Densities (B) Magnetic permeabilities (C) Electrical conductivities (D) Hardness

Description : Electrostatic separation of minerals from each other is based on their differences in the following property. (A) Densities (B) Magnetic permeabilities (C) Electrical conductivities (D) Hardness

Last Answer : (C) Electrical conductivities

The usual values of maximum flux densities for distribution transformers using hot rolled silicon steel are (a) 0.5 to 0.8 Wb/m2 (b) 0.8 to 1.0 Wb/m2 (c) 1.1 to 1.35 Wb/m2 (d) 1.4 to 1.8 Wb/m2

Description : The usual values of maximum flux densities for distribution transformers using hot rolled silicon steel are (a) 0.5 to 0.8 Wb/m2 (b) 0.8 to 1.0 Wb/m2 (c) 1.1 to 1.35 Wb/m2 (d) 1.4 to 1.8 Wb/m2

Last Answer : (c) 1.1 to 1.35 Wb/m2

Laser radiation is: w) monochromatic x) directed in a narrow beam y) produced with large power densities z) all of the above

Description : Laser radiation is: w) monochromatic x) directed in a narrow beam y) produced with large power densities z) all of the above

Last Answer : ANSWER: Z -- ALL OF THE ABOVE

1. BMD testing is done to diagnose which disease? 2. Which are the regions with the highest and lowest densities respectively? 3. With whose reign is the Gandhara school of art associated? 4. Which Directive Principle of State Policy has NOT been implemented so far? 5. If you swim one km, how many miles do you swim?

Description : 1. BMD testing is done to diagnose which disease? 2. Which are the regions with the highest and lowest densities respectively? 3. With whose reign is the Gandhara school of art associated? 4. Which ... of cancer ? 20. From which fund are the salaries of the Judges of the Supreme Court drawn?

Last Answer : Answer : 1. Osteoporosis 2. Europe and Oceania 3. Kanishka 4. Uniform civil code for the citizens 5. 0.62 6. Stamp Duties 7. Nilgiri Hills 8. Todarmal 9. Prime Minister of India 10. Vitamin A ... 15. K2 16. Tax on entertainment 17. Assam 18. Harappan Culture 19. Biopsy test 20. Consolidated Fund

Heavy metals got their name because compared to other atoms they have (1) Higher densities (2) Higher atomic masses (3) Higher atomic numbers (4) Higher atomic radii

Description : Heavy metals got their name because compared to other atoms they have (1) Higher densities (2) Higher atomic masses (3) Higher atomic numbers (4) Higher atomic radii

Last Answer : Higher atomic masses

The core of a transformer (medium size) uses to provide high flux densities

Description : The core of a transformer (medium size) uses to provide high flux densities (a) diamagnetic (c) ferromagnetic core (b) paramagnetic (d) none of these

Last Answer : The core of transformer is made up colled rolled grain oriented. It is a ferromagnetic material..

Which of the following statements holds for the divergence of electric and magnetic flux densities?

Description : Which of the following statements holds for the divergence of electric and magnetic flux densities?  A) Both are zero B) These are zero for static densities but non zero for time varying densities C) It is zero for electric flux density D) It is zero for magnetic flux density

Last Answer : Which of the following statement holds for the divergence of electric and magnetic flux densities ?  (A) Both are zero (B) These are zero for static densities but non zero for time varying densities. (C) It is zero for the electric flux density (D) It is zero for the magnetic flux density

A high voltage applied to a gas discharge tube containing neon gas at very low pressure causes a current to flow through the tube. Which one of the following are the particles that flow towards the cathode? Are they w) electrons x) protons y) negatively charged neon ions z) positively charged neon ions

Description : A high voltage applied to a gas discharge tube containing neon gas at very low pressure causes a current to flow through the tube. Which one of the following are the particles that flow towards the ... Are they w) electrons x) protons y) negatively charged neon ions z) positively charged neon ions

Last Answer : ANSWER: Z -- POSITIVELY CHARGED NEON IONS

Gas thermometers are more sensitive than the liquid thermometers because the gases – (1) have large coefficient of expansion (2) are lighter (3) have low specific heat (4) have high specific heat

Description : Gas thermometers are more sensitive than the liquid thermometers because the gases – (1) have large coefficient of expansion (2) are lighter (3) have low specific heat (4) have high specific heat

Last Answer : (1) have large coefficient of expansion Explanation: Gases are more sensitive to the temperature than liquids (such as mercury). That means gas expands more than the mercury for the same increase of temperature. Hence the has thermometer is more sensitive than liquid (mercury) thereto-meter.

Gas thermometers are more sensitive than the liquid thermometers because of the gases - (1) have low specific heat (2) have high specific heat (3) have large coefficient of expansion (4) are lighter

Description : Gas thermometers are more sensitive than the liquid thermometers because of the gases - (1) have low specific heat (2) have high specific heat (3) have large coefficient of expansion (4) are lighter

Last Answer : (1) have low specific heat Explanation: Gas thermometers are more sensitive because gas has low specific heat than liquids.

Gases deviate from gas laws at A. high temperature only B. low pressure only C. high pressure and low temperature D. low temperature only

Description : Gases deviate from gas laws at A. high temperature only B. low pressure only C. high pressure and low temperature D. low temperature only

Last Answer : high pressure and low temperature

Find false statement about effect of sulphur in fuel? (A) It has heating value (B) It helps in electrostatic precipitation of ash in flue gases (C) It leads to corrosion of air heaters, ducting, etc. if flue gas exit temperature is low (D) It erodes furnace walls

Description : Find false statement about effect of sulphur in fuel? (A) It has heating value (B) It helps in electrostatic precipitation of ash in flue gases (C) It leads to corrosion of air heaters, ducting, etc. if flue gas exit temperature is low (D) It erodes furnace walls

Last Answer : (D) It erodes furnace walls

Gas thermometers are more sensitive than the liquid thermometers because the gases (1) have large coefficient of expansion (2) are lighter (3) have low specific heat (4) have high,specific heat

Description : Gas thermometers are more sensitive than the liquid thermometers because the gases (1) have large coefficient of expansion (2) are lighter (3) have low specific heat (4) have high,specific heat

Last Answer : have large coefficient of expansion