RETICULAR DENSITIES SEEN IN THE RIGHT LOWER LUNG?

1 Answer

Answer :

Any cavitary lesion - Lucency (darkened area) within the lung parenchyma, with or without irregular margins that might be surrounded by an area of airspace consolidation or infiltrates, or by nodular or fibrotic (reticular) densities, or both. The walls surrounding the lucent area can be thick or thin.

Related questions

Description : In lung diseases like pneumonia, it usually affects certain site based on the anatomy, this is more obvious in which of the following: • Right upper lobe • Right middle lobe • Right lower lobe • Left upper lobe • Left lower lobe

Last Answer : Right middle lobe

Description : Assertion : Reticular fibrous connective Tissue is called as embryonic tissue. Reason : Reticular fibrous connective tissue is mainly found in embryon

Last Answer : Assertion : Reticular fibrous connective Tissue is called as embryonic tissue. Reason : Reticular fibrous ... . If both Assertion & Reason are false.

Description : Yellow, White & Reticular fiber made up of protien

Last Answer : Yellow, White & Reticular fiber made up of protien A. Elastin , Retiulin , Collagen , ... Reticulin protien D. Elastin , Colagen , Reticulin

Description : The cells that are directly concerned with phagocytosis of foreign bodies in the reticuloendothelial system are (a) reticular cells (b) monocytes (c) eosinophils and Basophils (d) macrophages

Last Answer : Ans:(b)

Description : The tissue that forms the basal framework of lymphoid organs, bone marrow and liver are (a) lymphoid tissue (b) areolar tissue (c) reticular tissue (d) elastic tissue

Last Answer : Ans:(d)

Description : Syncytium is formed by (a) primitive reticular cells (b) phagocytic reticular cells (c) endothelial cells (d) sensory cells

Last Answer : Ans:(c)

Description : What are the reticular fibers of the connective tissue and where can they be found?

Last Answer : The reticular fibers are very delicate interstitial fibers made of a special type of collagen known as collagen type III. They can be found in many organs and tissues such as in lymphnodes, in the spleen, in the liver, in blood vessels and also covering muscle fibers.

Description : State the function of reticular tissue.

Last Answer : Reticular tissue provides frame work for organs like liver, spleen, bone marrow, tonsils and mucous membrane, lining of the respiratory tract and alimentary canal.

Description : What is TRUE in regard to oral lesions of reticular lichen planus: A. Never accompanied with skin lesions B. Always accompanied with skin lesions C. Lesions may present anywhere D. Lesions may present on legs E. Lesions may present on arms

Last Answer : D. Lesions may present on legs E. Lesions may present on arms

Description : Fill in the blanks- _____and _____ densities should be found out, in order to get a better insight into the human-land ratio. -Geography

Last Answer : (c) Physiological and Agricultural

Description : Which are the regions with the highest and lowest densities respectively? -Do You Know?

Last Answer : answer:

Description : Which are the regions with the highest and lowest densities respectively? -Do You Know?

Last Answer : answer:

Description : Which are the regions with the highest and lowest densities respectively? -Do You Know?

Last Answer : answer:

Description : Which are the regions with the highest and lowest densities respectively? -Do You Know?

Last Answer : answer:

Description : Which are the regions with the highest and lowest densities respectively? -Do You Know?

Last Answer : answer:

Description : Which are the regions with the highest and lowest densities respectively? -Do You Know?

Last Answer : answer:

Description : The vapour densities of two gases are in the ratio of `1 : 3 ` . Their molecular masses are in the ratio of : -

Last Answer : The vapour densities of two gases are in the ratio of `1 : 3 ` . Their molecular masses are in the ratio of : - A. ` ... `1 : 2` C. `2 : 3` D. `3 : 1`

Description : What Molecular orbital interactions are not possible because the atomic orbitals have overlapping electron densities.?

Last Answer : Need answer

Description : What does gases low densities show about the distance between gas particles?

Last Answer : A low-density gas would have molecules that are farther apartand fewer in numbers per unit volume.

Description : How do you separate substances with different densities?

Last Answer : Feel Free to Answer

Description : How do water relative densities as a solid and a liquid differ from most other substances?

Last Answer : The solid phase of water (ice) is less dense than its liquid phase, therefore ice floats on liquid water. For other substances, the solid phase is most dense and it sinks in its liquid.

Description : Cherapunji receives more rainfall than Shillong because: (a) the former is nearer to the sea (b) the air of different densities and temperature tends to converge towards Cherapunjl from ... Cherapunji is located on the windward side (d) convective precipitation brings more rain at Cherapunji

Last Answer : Ans: (b)

Description : Heavy metals got their name because compared to other atoms they have - (1) Higher densities (2) Higher atomic masses (3) Higher atomic numbers (4) Higher atomic radii

Last Answer : (2) Higher atomic masses Explanation: Arsenic, beryllium, cadmium, chromium, lead, manganese, mercury, nickel, and selenium are some of the metals called 'heavy' because of their high relative atomic ... and can cause damage or death in animals, humans, and plants even at very low concentrations.

Description : Which are the regions with the highest and lowest densities respectively?

Last Answer : Europe and Oceania

Description : Which are the regions with the highest and lowest densities respectively?

Last Answer : Europe and Oceania

Description : . In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Last Answer : (D) Hardness, rigidity & brittleness

Description : Tabling process used for separating two materials of different densities by passing the dilute pulp over a table/deck, which is inclined from the horizontal surface at an angle of about (A) 1 to 2° (B) 2 to 5° (C) 5 to 10° (D) 10 to 15°

Last Answer : (B) 2 to 5°

Description : If a force greater than that of gravity is used to separate solids & fluidsof different densities, the process is termed as the (A) Sedimentation (B) Flocculation (C) Dispersion (D) Centrifugation

Last Answer : (D) Centrifugation

Description : Solid particles of different densities are separated by (A) Filters (B) Thickness (C) Cyclones (D) Sorting classifier

Last Answer : (D) Sorting classifier

Description : Separation of solid particles based on their densities is called (A) Sizing (B) Sorting (C) Clarification (D) Dispersion

Last Answer : (B) Sorting

Description : Sorting classifiers employing differential settling methods forseparation of particles make use of the differences in their (A) Particle sizes (B) Densities (C) Terminal velocities (D) None of these

Last Answer : (C) Terminal velocities

Description : Separation of particles of various sizes, shapes and densities by allowing them to settle in a fluid is called (A) Classification (B) Froth floatation (C) Thickening (D) Clarification

Last Answer : (A) Classification

Description : Dimensions of relative density are A. mass × length-3 B. mass × length3 C. It has no dimensions, since it's a ratio of two densities D. length3 × mass-1

Last Answer :  It has no dimensions, since it's a ratio of two densities

Description : The following are true about the sodium channels: a. they are made up of polypeptide chains b. have the highest densities at the nodes of Ranvier c. open in response to depolarization d. remain open as long as depolarization is maintained

Last Answer : have the highest densities at the nodes of Ranvier

Description : When a beam of light travels through media of two different densities, if theangle of incidence isgreater than the critical angle, _______ occurs. A) reflection B) refraction C) incidence D) criticism

Last Answer : reflection

Description : Both the conduction and displacement current densities coexist in which medium? a) Only conductors in air b) Only dielectrics in air c) Conductors placed in any dielectric medium d) Both the densities can never coexist

Last Answer : c) Conductors placed in any dielectric medium

Description : Calculate the electric field when the conductivity is 20 units, electron density is 2.4 units and the velocity is 10m/s. Assume the conduction and convection current densities are same. a) 2.4 b) 4.8 c) 3.6 d) 1.2

Last Answer : d) 1.2

Description : The total charge of a surface with densities 1,2,...,10 is a) 11 b) 33 c) 55 d) 77

Last Answer : c) 55

Description : The terminal velocity of a solid spherical particle falling through a stationary fluid mass in the Stoke's law range is proportional to the (A) Inverse of fluid viscosity (B) Square of particle size (C) Difference in the densities of the particle & fluid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : The range of a particular Rotameter can be increased by (A) Use of floats of different densities (B) No means (C) Increasing the diameter of the float (D) Decreasing the diameter of the float

Last Answer : (A) Use of floats of different densities

Description : Electrostatic separation of minerals from each other is based on their differences in the following property. (A) Densities (B) Magnetic permeabilities (C) Electrical conductivities (D) Hardness

Last Answer : (C) Electrical conductivities

Description : The same volume of all gases is representative of their (A) Specific gravities (B) Densities (C) Gas characteristic constants

Last Answer : Option D

Description : The same volume of all gases would represent their  (a) densities  (b) specific weights  (c) molecular weights  (d) gas characteristic constants  (e) specific gravities.

Last Answer : Answer : c

Description : The usual values of maximum flux densities for distribution transformers using hot rolled silicon steel are (a) 0.5 to 0.8 Wb/m2 (b) 0.8 to 1.0 Wb/m2 (c) 1.1 to 1.35 Wb/m2 (d) 1.4 to 1.8 Wb/m2

Last Answer : (c) 1.1 to 1.35 Wb/m2

Description : Laser radiation is: w) monochromatic x) directed in a narrow beam y) produced with large power densities z) all of the above

Last Answer : ANSWER: Z -- ALL OF THE ABOVE

Description : Under which of the following conditions does the behavior of a real gas resemble that of an ideal gas? Is it: w) under all conditions of temperature and pressure x) only at very high pressure ... when the gas is near condensation z) only at low densities when the molecules are relatively far apart  

Last Answer : ANSWER: Z -- ONLY AT LOW DENSITIES WHEN THE MOLECULES ARE RELATIVELY FAR APART

Description : 1. BMD testing is done to diagnose which disease? 2. Which are the regions with the highest and lowest densities respectively? 3. With whose reign is the Gandhara school of art associated? 4. Which ... of cancer ? 20. From which fund are the salaries of the Judges of the Supreme Court drawn?

Last Answer : Answer : 1. Osteoporosis 2. Europe and Oceania 3. Kanishka 4. Uniform civil code for the citizens 5. 0.62 6. Stamp Duties 7. Nilgiri Hills 8. Todarmal 9. Prime Minister of India 10. Vitamin A ... 15. K2 16. Tax on entertainment 17. Assam 18. Harappan Culture 19. Biopsy test 20. Consolidated Fund

Description : Heavy metals got their name because compared to other atoms they have (1) Higher densities (2) Higher atomic masses (3) Higher atomic numbers (4) Higher atomic radii

Last Answer : Higher atomic masses

Description : The core of a transformer (medium size) uses to provide high flux densities (a) diamagnetic (c) ferromagnetic core (b) paramagnetic (d) none of these

Last Answer : The core of transformer is made up colled rolled grain oriented. It is a ferromagnetic material..