Emitter follower is used for (a) reducing the gain (b) increasing the distortion (c) impedance matching (d) none of these

Emitter follower is used for (a) reducing the gain (b) increasing the distortion (c) impedance matching (d) none of these 
by

1 Answer

Answer :

(c) impedance matching

by

Related questions

Identify type of BJT configuration having following features : (i) BJT configuration having the least current gain. (ii) KIT configuration called as voltage follower. (iii) BJT configuration having current gain less than one. (iv) BJT configuration suitable for impedance matching. (v) BIT configuration suitable for voltage amplification. (vi) BJT configuration having the least output impedance.

Description : Identify type of BJT configuration having following features : (i) BJT configuration having the least current gain. (ii) KIT configuration called as voltage follower. (iii) BJT ... configuration suitable for voltage amplification. (vi) BJT configuration having the least output impedance.  

Last Answer : (i) BJT configuration having the least current gain : Common Base Configuration  (ii) KIT configuration called as voltage follower: Common Collector Configuration  (iii) BJT ... Emitter Configuration  (vi) BJT configuration having the least output impedance: Common Collector Configuration

The current gain of emitter follower is:

Description : The current gain of emitter follower is: A) less than one B) more than one C) zero D) unpredictable

Last Answer : The current gain of emitter follower is: more than one 

Which of the following combinations has no phase inversion of the signal? A) Two CE stages B) CE and CC stages C) Three CE stages D) CE stage and emitter follower.

Description : Which of the following combinations has no phase inversion of the signal? A) Two CE stages B) CE and CC stages C) Three CE stages D) CE stage and emitter follower.

Last Answer : A) Two CE stages

An emitter follower circuit is widely used in electronic instruments because

Description : An emitter follower circuit is widely used in electronic instruments because  (A) Its voltage gain is less than unity  (B) its output impedance is high and input impedance is low  (C) its output impedance is low and input impedance is high  (D) none of the above

Last Answer : Don't no happy be

What is an emitter follower BJT circuit ?

Description : What is an emitter follower BJT circuit ? (A) Common Collector Amplifier (B) Common Emitter Amplifier (C) Common Base Amplifier (D) None of the above

Last Answer : What is an emitter follower BJT circuit ? (A) Common Collector Amplifier (B) Common Emitter Amplifier (C) Common Base Amplifier (D) None of the above

An Op-amp as a voltage follower has a voltage gain of

Description : An Op-amp as a voltage follower has a voltage gain of

Last Answer : An Op-amp as a voltage follower has a voltage gain of Unity

Which of the following is and impedance matching ration of coax balun? A. 2:8 B. 1:2 C. 4:1 D. 2:1

Description : Which of the following is and impedance matching ration of coax balun? A. 2:8 B. 1:2 C. 4:1 D. 2:1

Last Answer : C. 4:1

A convenient method of determining antenna impedance. A. Stub matching B. Reactance circle C. Smith chart D. Trial and error

Description : A convenient method of determining antenna impedance. A. Stub matching B. Reactance circle C. Smith chart D. Trial and error

Last Answer : C. Smith chart

How quarter wave transformer is used for impedance matching.

Description : How quarter wave transformer is used for impedance matching. 

Last Answer : In all applications of transmission line, it is required that the load be matched to line, Which requires tuning out the unwanted load reactance and the transformation of resulting impedance to the required value ... Step down transformer If ZL <Zo then it acts as a Step up transformer  

Explain the use of baluns for impedance matching.

Description : Explain the use of baluns for impedance matching.

Last Answer : Balun stands for Balance to unbalance. It can also be used to connect the unbalanced transmission line to a balance load such as antenna. It consist of special type of transformer with an unbalanced primary ... matching. Its input is 300-75ohm. It consist of two quarter wave length.  

Explain impedance matching of PA system.

Description : Explain impedance matching of PA system.

Last Answer : Impedance Matching of PA system:- (i) It is necessary to match the total loudspeaker impedance with the output impedance of the power amplifier. It will ensure maximum power transfer to the ... total impedance of speaker unit, then it can cause excessive power dissipation, distortion and noise.

A common-emitter circuit has an input voltage of 0.1 volt, an output voltage of 2.0 volts, an input current of 0.5 milliamps, and an output current of 10 milliamps. What is the power gain? A. 20 B. 40 C. 400 D. 4000

Description : A common-emitter circuit has an input voltage of 0.1 volt, an output voltage of 2.0 volts, an input current of 0.5 milliamps, and an output current of 10 milliamps. What is the power gain? A. 20 B. 40 C. 400 D. 4000

Last Answer : Answer: C

A certain common-emitter amplifier has a voltage gain of 100. If the emitter bypass capacitor is removed.

Description : A certain common-emitter amplifier has a voltage gain of 100. If the emitter bypass capacitor is removed.  a. The circuit will become unstable b. The voltage gain will decrease  c. The voltage gain will increase d. The circuit will become stable

Last Answer : B

If the base current of a BJT is 250 µA and emitter current is 15 mA, then the common base current gain will be

Description :  If the base current of a BJT is 250 µA and emitter current is 15 mA, then the common base current gain will be A) 0.98 B) 0.41 C) 59 D) 55  

Last Answer :  If the base current of a BJT is 250 µA and emitter current is 15 mA, then the common base current gain will be 0.98 

In the common–emitter transistor circuit, if the current gain is 100 and the collector current is 10 mA, the

Description : In the common–emitter transistor circuit, if the current gain is 100 and the collector current is 10 mA, the base current is: (1) 10 µA (2) 100 µA (3) 1 A (4) 10 A 

Last Answer : In the common–emitter transistor circuit, if the current gain is 100 and the collector current is 10 mA, the base current is: 100 µA

In BJT, the common emitter gain β is

Description : In BJT, the common emitter gain β is (A) desired to have large value (B) desired to have small value (C) desired to have moderate value (D) the value need not be controlled

Last Answer : In BJT, the common emitter gain β is desired to have large value.  β is the Current gain factor also called transport factor. 

What is the unit of charge?

Description : Coulomb Siemens Farad Joule

Last Answer : Correct Answer: 1. Coulomb

What is the unit of electric current?

Description : A) Watt B) Volts C) Farad D) Ampere

Last Answer : Correct answer: D) Ampere

What is the colour of silica gel in transformer?

Description : Options: A) Yellow B) No colour C) White D) Blue

Last Answer : Correct Answer: D) Blue

What is the unit of electric power?

Description : Options: A) WATT B) AMPERE C) VOLTS D) OHM

Last Answer : Correct Answer: A) WATT

increases the steady state accuracy. (a) Integrator (b) Differentiator (c) Phase lead compensator (d) Phase lag compensator Ans:A 10.As a result of introduction of negative feedback which of the following will not decrease ? (a) Band width (b) Overall gain (c) Distortion (d) Instability

Description : increases the steady state accuracy. (a) Integrator (b) Differentiator (c) Phase lead compensator (d) Phase lag compensator Ans:A 10.As a result of introduction of negative feedback which of the following will not decrease ? (a) Band width (b) Overall gain (c) Distortion (d) Instability

Last Answer : Ans: A

An amplifier has a voltage gain of 120. To reduce distortion, 10% negative feedback is employed. The gain of

Description : An amplifier has a voltage gain of 120. To reduce distortion, 10% negative feedback is employed. The gain of the amplifier with feedback is  (1) 141 (2) 92.3 (3) 9.23 (4) 1.41

Last Answer : An amplifier has a voltage gain of 120. To reduce distortion, 10% negative feedback is employed. The gain of the amplifier with feedback is 9.23

The presence of standing waves on a transmission line is the result of A. a high level of attenuation on the line. B. terminating the line by a resistive load equal in value to the surge impedance C. reducing the input power to below its critical level. D. an impedance mismatch between the load and the line.

Description : The presence of standing waves on a transmission line is the result of A. a high level of attenuation on the line. B. terminating the line by a resistive load equal in value to the surge impedance ... input power to below its critical level. D. an impedance mismatch between the load and the line.

Last Answer : D. an impedance mismatch between the load and the line.

A transformer works on the basic principle of ____________. A. self impedance B. attraction and repulsion C. mutual induction D. increasing power

Description : A transformer works on the basic principle of ____________. A. self impedance B. attraction and repulsion C. mutual induction D. increasing power

Last Answer : Answer: C

Operational amplifiers, used primarily in analog circuits, are characterized by ____________. A. high input impedance, high gain and low output impedance B. high input impedance, high gain and high output impedance C. low input impedance, low gain and high output impedance D. low input impedance, high gain and low output impedance

Description : Operational amplifiers, used primarily in analog circuits, are characterized by ____________. A. high input impedance, high gain and low output impedance B. high input impedance, high gain and high output ... gain and high output impedance D. low input impedance, high gain and low output impedance

Last Answer : Answer: A

Calculate the noise figure of the receiver whose RF amplifier has an input resistance of 1000Ω and an equivalent shot-noise resistance of 2000Ω, a gain of 25 and load resistance of 125 kΩ. Given that the bandwidth is 1.0MHz and the temperature is 20˚C, and that the receiver is connected to an antenna with an impedance of 75Ω. A. 30.3 B. 3.03 C. 303 D. .303

Description : Calculate the noise figure of the receiver whose RF amplifier has an input resistance of 1000Ω and an equivalent shot-noise resistance of 2000Ω, a gain of 25 and load resistance of 125 kΩ. Given that the bandwidth is 1. ... to an antenna with an impedance of 75Ω. A. 30.3 B. 3.03 C. 303 D. .303

Last Answer : A. 30.3

Common base configuration is little used because A) It has low input impedance B) It has high input impedance C) It does not heat up D) It has very high gain.

Description : Common base configuration is little used because A) It has low input impedance B) It has high input impedance C) It does not heat up D) It has very high gain.

Last Answer : A) It has low input impedance

If the output impedance of an amplifier circuit is decreased, what is the effect on the gain?

Description : If the output impedance of an amplifier circuit is decreased, what is the effect on the gain?

Last Answer : The gain decreases.

If the input-signal-developing impedance of an amplifier is increased, what is the effect on the gain?

Description : If the input-signal-developing impedance of an amplifier is increased, what is the effect on the gain?

Last Answer : The gain increases.

Compare BJT common base configuration with common collector configuration on the basis of (i) Current gain (ii) Voltage gain (iii) Input impedance (iv) Output impedance

Description : Compare BJT common base configuration with common collector configuration on the basis of (i) Current gain (ii) Voltage gain (iii) Input impedance (iv) Output impedance

Last Answer : Parameter Common Base Common Collector Current gain Low (About 1) High (1+β) Voltage gain High 1  Input impedance  Low High Output impedance High Low

The action of quinidine differs from that of digitalis in (a) Decreasing irritability of cardiac muscle (b) Preventing passage of impulses to the ventricle (c) Increasing irritability of heart muscle (d) Reducing conductivity (e) None of the above

Description : The action of quinidine differs from that of digitalis in (a) Decreasing irritability of cardiac muscle (b) Preventing passage of impulses to the ventricle (c) Increasing irritability of heart muscle (d) Reducing conductivity (e) None of the above

Last Answer : Ans: A

The tendency of a petrol engine to knock increases by a. supercharging b. scavenging c. increasing the engine horse power d. reducing the spark advance

Description : The tendency of a petrol engine to knock increases by a. supercharging b. scavenging c. increasing the engine horse power d. reducing the spark advance

Last Answer : ANSWER a. supercharging

Detergents dissolved in water help in cleaning clothes by A. Increasing the temperature of water B. Reacting chemically with dirt C. Reducing the surface tension of water D. Dissolving dirt

Description : Detergents dissolved in water help in cleaning clothes by A. Increasing the temperature of water B. Reacting chemically with dirt C. Reducing the surface tension of water D. Dissolving dirt

Last Answer : ANSWER: C

A slow-running pendulum clock can be speeded up by? A. Reducing the weight of the bob B. Reducing the length of the rod C. Increasing the weight of the bob D. Increasing the length of the rod

Description : A slow-running pendulum clock can be speeded up by? A. Reducing the weight of the bob B. Reducing the length of the rod C. Increasing the weight of the bob D. Increasing the length of the rod

Last Answer : ANSWER: B

Increasing the resonant frequency of an end-fed Marconi antenna can be done by A. adding a capacitor in series and reducing the physical length B. adding an inductor in series C. adding an inductor in series D. All of these

Description : Increasing the resonant frequency of an end-fed Marconi antenna can be done by A. adding a capacitor in series and reducing the physical length B. adding an inductor in series C. adding an inductor in series D. All of these

Last Answer : A. adding a capacitor in series and reducing the physical length

The relative saturation of a partially saturated mixture of vapour and gas can be increased by __________ of the mixture. (A) Reducing the total pressure (B) Increasing the total pressure (C) Reducing the temperature (D) Both (B) and (C)

Description : The relative saturation of a partially saturated mixture of vapour and gas can be increased by __________ of the mixture. (A) Reducing the total pressure (B) Increasing the total pressure (C) Reducing the temperature (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

The cooling effect in a cooling tower cannot be increased by (A) Increasing the air velocity over the wet surfaces (B) Reducing the humidity of entering air (C) Lowering the barometric pressure (D) None of these

Description : The cooling effect in a cooling tower cannot be increased by (A) Increasing the air velocity over the wet surfaces (B) Reducing the humidity of entering air (C) Lowering the barometric pressure (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

In most of the mechanically agitated liquid-liquid extractors, baffles or horizontal compartmental plates are provided, which helps in (A) Reducing the axial mixing (B) Increasing the rate of extraction (C) Maintaining the concentration difference between the two phases (D) All 'a', 'b' & 'c'

Description : In most of the mechanically agitated liquid-liquid extractors, baffles or horizontal compartmental plates are provided, which helps in (A) Reducing the axial mixing (B) Increasing the rate of extraction (C) Maintaining the concentration difference between the two phases (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

The cooling effect in a cooling tower can be speeded up by (A) Increasing the air velocity and area of exposed wet surface (B) Reducing the barometric pressure (C) Reducing the humidity of the air (D) All (A), (B) and (C)

Description : The cooling effect in a cooling tower can be speeded up by (A) Increasing the air velocity and area of exposed wet surface (B) Reducing the barometric pressure (C) Reducing the humidity of the air (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A slow-running pendulum clock can be speeded up by--------? A. Increasing the length of the rod B. Increasing the weight of the bob C. Reducing the length of the rod (Answer) D. Reducing the weight of the bob

Description : A slow-running pendulum clock can be speeded up by--------? A. Increasing the length of the rod B. Increasing the weight of the bob C. Reducing the length of the rod (Answer) D. Reducing the weight of the bob

Last Answer : C. Reducing the length of the rod (Answer)

Detergents dissolved in water help in cleaning clothes by-----? A. Increasing the temperature of water B. Reacting chemically with dirt C. Reducing the surface tension of water (Answer) D. Dissolving dirt

Description : Detergents dissolved in water help in cleaning clothes by-----? A. Increasing the temperature of water B. Reacting chemically with dirt C. Reducing the surface tension of water (Answer) D. Dissolving dirt

Last Answer : C. Reducing the surface tension of water (Answer)

The picture shown here is a check dam. Which of the following benefit it does not provide. A. Increasing ground water level. B. Controlling the floods. C. Reducing soil erosion. D. Fishing activity.

Description : The picture shown here is a check dam. Which of the following benefit it does not provide. A. Increasing ground water level. B. Controlling the floods. C. Reducing soil erosion. D. Fishing activity.

Last Answer : D. Fishing activity.

Sometimes water is sprayed during coal charging in the coke oven, which helps in (A) Prevention of clinker formation in the oven (B) Controlling the dust nuisance while charging the coal (C) Reducing the cracking of hydrocarbons in the gas and increasing the percentage of CO & H2 in the gas (due to the endothermic reaction represented by C + H2O = CO + H2 ) (D) All (A), (B) and (C)

Description : Sometimes water is sprayed during coal charging in the coke oven, which helps in (A) Prevention of clinker formation in the oven (B) Controlling the dust nuisance while charging the coal (C) Reducing the cracking of hydrocarbons in ... represented by C + H2O = CO + H2 ) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Select the correct practical example of steady non-uniform flow. (A) Motion of water around a ship in a lake (B) Motion of river around bridge piers (C) Steadily decreasing flow through a reducing section (D) Steadily increasing flow through a pipe

Description : Select the correct practical example of steady non-uniform flow. (A) Motion of water around a ship in a lake (B) Motion of river around bridge piers (C) Steadily decreasing flow through a reducing section (D) Steadily increasing flow through a pipe

Last Answer : (C) Steadily decreasing flow through a reducing section

Which of the following are reasons for deploying a multicloud architecture…. 1. reducing reliance on any single vendor 2. increasing flexibility through choice 3. mitigating against disasters A. All above B. 1 only C. 2 Only D. 2 and 3 only

Description : Which of the following are reasons for deploying a multicloud architecture…. 1. reducing reliance on any single vendor 2. increasing flexibility through choice 3. mitigating against disasters A. All above B. 1 only C. 2 Only D. 2 and 3 only

Last Answer : All above

Which of the following processes follows the hardening process for reducing the hardening strains & increasing the toughness of the steel part? (A) Anodising (B) Tempering (C) Carburising

Description : Which of the following processes follows the hardening process for reducing the hardening strains & increasing the toughness of the steel part? (A) Anodising (B) Tempering (C) Carburising

Last Answer : (B) Tempering

Dry saturated steam can be converted into superheated steam by (A) Increasing its cross-sectional area of flow (B) Passing it through a pressure reducing valve (C) Forcing it downwards through a vertical tube (D) None of these

Description : Dry saturated steam can be converted into superheated steam by (A) Increasing its cross-sectional area of flow (B) Passing it through a pressure reducing valve (C) Forcing it downwards through a vertical tube (D) None of these

Last Answer : (B) Passing it through a pressure reducing valve

reduction in thermal resistance during heat transfer does not occur in the (A) Convection heat transfer by stirring the fluid and cleaning the heating surface (B) Conduction heat transfer by reduction in the material thickness and increase in the thermal conductivity (C) Radiation heat transfer by increasing the temperature and reducing the emissivity (D) None of these

Description : reduction in thermal resistance during heat transfer does not occur in the (A) Convection heat transfer by stirring the fluid and cleaning the heating surface (B) Conduction heat transfer by ... Radiation heat transfer by increasing the temperature and reducing the emissivity (D) None of these

Last Answer : Option C