The amount of heat required to decompose a compound into its elements is __________ the heat of formation of that compound from its elements. (A) Less than (B) More than (C) Same as (D) Not related to

The amount of heat required to decompose a compound into its elements is __________ the heat of formation of that compound from its elements.
(A) Less than
(B) More than
(C) Same as
(D) Not related to
by

1 Answer

Answer :

(C) Same as
by

Related questions

Heat requirement for decomposition of a compound into its elements is __________ that is evolved during the formation of that compound from its elements. (A) The same (B) Less than (C) Greater than (D) Different than

Description : Heat requirement for decomposition of a compound into its elements is __________ that is evolved during the formation of that compound from its elements. (A) The same (B) Less than (C) Greater than (D) Different than

Last Answer : (A) The same

The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot be recovered by distillation (C) Its recovery cost by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Description : The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot ... by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Last Answer : (C) Its recovery cost by distillation may be prohibitively high

Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low boiling products are prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose

Compound having large heat of formation is (A) More stable (B) Less stable (C) Not at all stable (like nascent O2) (D) Either more or less stable; depends on the compound

Description : Compound having large heat of formation is (A) More stable (B) Less stable (C) Not at all stable (like nascent O2) (D) Either more or less stable; depends on the compound

Last Answer : A) More stable

Addition polymerisation takes place either by a free radical mechanism or ionic mechanism depending on the reagents used. Free radical polymerisation is catalyzed by __________, which decompose to give free radicals. (A) Organic peroxides (B) Sulphuric acid (C) Hydrofluoric acid (D) None of these

Description : Addition polymerisation takes place either by a free radical mechanism or ionic mechanism depending on the reagents used. Free radical polymerisation is catalyzed by __________, which decompose to give free radicals. (A) Organic peroxides (B) Sulphuric acid (C) Hydrofluoric acid (D) None of these

Last Answer : (A) Organic peroxides

Which metal carbonate does not decompose in heat ?

Last Answer : Carbon in alkali metals does not decompose in heat

Ammonium salts decompose quite readily on heating : (i) Ammonium salt of weak oxidizing anion (e.g. `Cl^(-), CO_(3)^(2-), SO_(4)^(2-)`) `overset("heat

Description : Ammonium salts decompose quite readily on heating : (i) Ammonium salt of weak oxidizing anion (e.g. `Cl^(-), CO_(3)^(2-), SO_(4)^(2-)`) `overset("heat

Last Answer : Ammonium salts decompose quite readily on heating : (i) Ammonium salt of weak oxidizing anion (e.g. `Cl^(-), CO_(3) ... N_(2)` D. `NO, NH_(3), N_(2)O`

Ammonium salts decompose quite readily on heating : (i) Ammonium salt of weak oxidizing anion (e.g. `Cl^(-), CO_(3)^(2-), SO_(4)^(2-)`) `overset("heat

Description : Ammonium salts decompose quite readily on heating : (i) Ammonium salt of weak oxidizing anion (e.g. `Cl^(-), CO_(3)^(2-), SO_(4)^(2-)`) `overset("heat

Last Answer : Ammonium salts decompose quite readily on heating : (i) Ammonium salt of weak oxidizing anion (e.g. `Cl^(-), CO_(3) ... N_(2)` D. `NO, NH_(3), N_(2)O`

Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) Burning the fuel with theoretically required amount of pure oxygen results in attainment of maximum adiabatic flame temperature (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values

Description : Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) ... flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values

Last Answer : (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature

Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A process is irreversible as long as Δ S for the system is greater than zero (C) The mechanical work done by a system is always equal to∫P.dV (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Description : Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A ... compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Last Answer : (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if distilled directly at atmospheric pressure (C) Material cannot be distilled by indirect heating even under low pressure, because of the high boiling temperature (D) Material to be distilled is thermally unstable or has the tendency to react with other components associated with it, at the boiling temperature

Description : Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if ... unstable or has the tendency to react with other components associated with it, at the boiling temperature

Last Answer : (A) Azeotropic mixture is to be separated and the final product is miscible with water

In case of physical adsorption, the difference between heat of adsorption and heat of normal condensation is (A) Equal to the heat of formation of surface compound (B) Equal to the heat of wetting (C) Zero (D) Called integral heat of adsorption

Description : In case of physical adsorption, the difference between heat of adsorption and heat of normal condensation is (A) Equal to the heat of formation of surface compound (B) Equal to the heat of wetting (C) Zero (D) Called integral heat of adsorption

Last Answer : (B) Equal to the heat of wetting

Change of heat content when one mole of compound is burnt in oxygen at constant pressure is called the (A) Calorific value (B) Heat of reaction (C) Heat of combustion (D) Heat of formation

Description : Change of heat content when one mole of compound is burnt in oxygen at constant pressure is called the (A) Calorific value (B) Heat of reaction (C) Heat of combustion (D) Heat of formation

Last Answer : (C) Heat of combustion

The formation of a compound by the union ; of elements is called?

Description : The formation of a compound by the union ; of elements is called?

Last Answer : Synthesis Examples: Water; Steam; Salt etc. .

For the formation of cell-components the elements required are a. Nitrogen b. Oxygen c. Sulphur d. All of these

Description : For the formation of cell-components the elements required are a. Nitrogen b. Oxygen c. Sulphur d. All of these

Last Answer : Ans: D

Any forensics people out there? How long does it take for a body to decompose and leave only bones?

Description : Any forensics people out there? How long does it take for a body to decompose and leave only bones?

Last Answer : Moment of Death: 1} The heart stops 2} The skin gets tight and grey in color 3} All the muscles relax 4} The bladder and bowels empty 5} The body's temperature will typically drop 1.5 ... enamel is the strongest substance in the body. The jawbone is the densest, so that usually will also remain.

Will the new corn-based "plastic" decompose in a compost?

Description : Will the new corn-based "plastic" decompose in a compost?

Last Answer : Try one or two, and report back.

Why does hydrogen peroxide decompose so quickly when applied to a cut?

Description : Why does hydrogen peroxide decompose so quickly when applied to a cut?

Last Answer : You really like these homework related questions, dontcha?

I'm a third grade student trying to do a project on how long it takes oranges to decompose

Description : I'm a third grade student trying to do a project on how long it takes oranges to decompose

Last Answer : You have to go on line and look this up.

Will vajgl decompose in nature?

Description : Cigarette butt thrown in the garden, will it decompose?

Last Answer : Well spread out and fairly fast ....: D it's just paper and quality cotton ... so yes: D ☢ ☠ ☣ ☠ ☣ ☠ ☣ ☠ ☢

Metal carbonates decompose on heating to give metal oxide and carbon dioxide. Which of the metal carbonates is most stable thermally?

Description : Metal carbonates decompose on heating to give metal oxide and carbon dioxide. Which of the metal carbonates is most stable thermally?

Last Answer : Metal carbonates decompose on heating to give metal oxide and carbon dioxide. Which of the metal carbonates is most ... C. `SrCO_(3)` D. `BaCO_(3)`

Which of the following can decompose on heating to give `CO_(2)` ?

Description : Which of the following can decompose on heating to give `CO_(2)` ?

Last Answer : Which of the following can decompose on heating to give `CO_(2)` ? A. `Li_(2)CO_(3)` B. `Na_(2)CO_(3)` C. `KHCO_(3)` D. `BaCO_(3)`

How long does bread decompose?

Description : How long does bread decompose?

Last Answer : Need answer

How long does it take for bones to decompose?

Description : How long does it take for bones to decompose?

Last Answer : It depends on what type of bone. A human bone would take about 8years in a area like Mexico, while it would take 80 years in a coldenvironment like Canada. It depends on the contents of the bone andthe environment it is in.

How long does it take for a plastic folding chair to decompose?

Description : How long does it take for a plastic folding chair to decompose?

Last Answer : it would take around 20,000,000 years :/

How long does it take for corn on the cob to decompose?

Description : How long does it take for corn on the cob to decompose?

Last Answer : About 15-20 min! Is that the answer you wanted?

Do sea shells decompose?

Description : Do sea shells decompose?

Last Answer : Feel Free to Answer

How long does it take for brass to decompose?

Description : How long does it take for brass to decompose?

Last Answer : What is the answer ?

What are things that mushrooms decompose?

Description : What are things that mushrooms decompose?

Last Answer : earth

How long would it take for a whiteboard marker to decompose?

Description : How long would it take for a whiteboard marker to decompose?

Last Answer : Need answer

How long does it takes for a yogurt to decompose?

Description : How long does it takes for a yogurt to decompose?

Last Answer : Need answer

How long does it take for toilet paper to decompose in water?

Description : How long does it take for toilet paper to decompose in water?

Last Answer : 24 hours

How long does it take for aluminum and iron to decompose?

Description : How long does it take for aluminum and iron to decompose?

Last Answer : Thick metals like iron, will not decompose, but will eventually break apart. Flimsy metals such as aluminum would decompose after about 200-500 years.

what is two ways to decompose 8/4?

Description : what is two ways to decompose 8/4?

Last Answer : 2

Distillation at reduced pressure is used for liquids which (a) Have high boiling points (b) Have low boiling points (c) Have high volatility (d) Decompose before their boiling points

Description : Distillation at reduced pressure is used for liquids which (a) Have high boiling points (b) Have low boiling points (c) Have high volatility (d) Decompose before their boiling points

Last Answer : Ans:(d)

In a first order reaction, the time required to reduce the concentration of reactant from 1 mole/litre to 0.5 mole/litre will be __________ that requiredto reduce it from 10 moles/litre to 5 moles/litre in the same volume.(A) More than(B) Less than(C) Same as(D) Data insufficient; can't be predicted

Description : In a first order reaction, the time required to reduce the concentration of reactant from 1 mole/litre to 0.5 mole/litre will be __________ that requiredto reduce it from 10 moles/litre to 5 moles/litre in the ... (A) More than (B) Less than (C) Same as (D) Data insufficient; can't be predicted

Last Answer : (C) Same as

Since the enthalpy of elements in their natural state is taken to be zero, the heat of formation `(Delta_(f)H)` of compounds

Description : Since the enthalpy of elements in their natural state is taken to be zero, the heat of formation `(Delta_(f)H)` of compounds

Last Answer : Since the enthalpy of elements in their natural state is taken to be zero, the heat of formation `( ... C. is zero D. May be positive or negative

LMTD for evaporators & condensers for a given terminal parameters & set of conditions for counter-flow is equal to that for parallel flow. In such heat exchangers, with one of the fluids condensing or evaporating, the surface area required is the least in the __________ flow. (A) Parallel (B) Mixed (C) Counter flow (D) Same in either 'a', b' or 'c'

Description : LMTD for evaporators & condensers for a given terminal parameters & set of conditions for counter-flow is equal to that for parallel flow. In such heat exchangers, with one of the fluids condensing or evaporating, the surface ... Parallel (B) Mixed (C) Counter flow (D) Same in either 'a', b' or 'c'

Last Answer : (D) Same in either 'a', b' or 'c'

The maximum adiabatic flame temperature is attained, when the fuel is burnt with (A) Theoretically required amount of air(B) More than theoretically required amount of air(C) Less than theoretically required amount of air(D) Theoretically required amount of oxygen

Description : The maximum adiabatic flame temperature is attained, when the fuel is burnt with (A) Theoretically required amount of air (B) More than theoretically required amount of air (C) Less than theoretically required amount of air (D) Theoretically required amount of oxygen

Last Answer : (D) Theoretically required amount of oxygen

The equivalent diameter for the annulus of a double pipe heat exchanger, whose inner pipe has fins on the outside is __________ compared to the same size pipes without fins. (A) More (B) Less (C) Same (D) Unpredictable

Description : The equivalent diameter for the annulus of a double pipe heat exchanger, whose inner pipe has fins on the outside is __________ compared to the same size pipes without fins. (A) More (B) Less (C) Same (D) Unpredictable

Last Answer : (B) Less

A Barbie doll is available at Ratna stores in salem at 20% discount and the same is available at only 18% discount at Royal stores in attur. Deepika has just sufficient amount of Rs 800 to purchase it at Ratna stores in salem. What is the amount that deepika has less than required amount to purchase it at Royal stores in attur?

Description : A Barbie doll is available at Ratna stores in salem at 20% discount and the same is available at only 18% discount at Royal stores in attur. Deepika has just sufficient amount of Rs 800 to purchase ... is the amount that deepika has less than required amount to purchase it at Royal stores in attur?

Last Answer : 80%= 800 100%= 1000 when discount 18%,then, SP= 1000-180=820 required difference= 820-800 = Rs. 20

The amount of heat required to change a boiling liquid to a gas at the same temperature depends on one of the following properties of the liquid. Does it depend on the liquid's: w) heat of fusion x) heat of vaporization y) temperature z) density

Description : The amount of heat required to change a boiling liquid to a gas at the same temperature depends on one of the following properties of the liquid. Does it depend on the liquid's: w) heat of fusion x) heat of vaporization y) temperature z) density

Last Answer : ANSWER: X -- HEAT OF VAPORIZATION

The chemical potential for a pure substance is __________ its partial molal free energy. (A) More than (B) Less than (C) Equal to (D) Not related to

Description : The chemical potential for a pure substance is __________ its partial molal free energy. (A) More than (B) Less than (C) Equal to (D) Not related to

Last Answer : (C) Equal to

The equivalent diameter for pressure drop is __________ that for heat transfer. (A) Smaller than (B) Greater than (C) Equal to (D) Not related with

Description : The equivalent diameter for pressure drop is __________ that for heat transfer. (A) Smaller than (B) Greater than (C) Equal to (D) Not related with

Last Answer : (A) Smaller than

Co-efficient of velocity is __________ the coefficient of discharge. (A) Less than (B) More than (C) Equal to (D) Not related to

Description : Co-efficient of velocity is __________ the coefficient of discharge. (A) Less than (B) More than (C) Equal to (D) Not related to

Last Answer : (B) More than

In human body, the cell growth and differentiation are highly controlled and regulated, but in cancer cells. (a) there is breakdown of these regulatory mechanism leading to formation of benign and malignant tumors (b) controlled cell division and over production of genetic material occur (c) RNA is mutated and produced in less amount (d) DNA is mutated and produced in less amount

Description : In human body, the cell growth and differentiation are highly controlled and regulated, but in cancer cells. (a) there is breakdown of these regulatory mechanism leading to formation of benign and malignant ... is mutated and produced in less amount (d) DNA is mutated and produced in less amount

Last Answer : Ans:(a)

heat Basic The amount No. Compound The amount ?

Last Answer : heat Basic The amount.

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

In counter flow compared to parallel flow, (A) LMTD is greater (B) Less surface area is required for a given heat transfer rate (C) Both (A) and (B) (D) More surface area is required for a given heat transfer rate

Description : In counter flow compared to parallel flow, (A) LMTD is greater (B) Less surface area is required for a given heat transfer rate (C) Both (A) and (B) (D) More surface area is required for a given heat transfer rate

Last Answer : (C) Both (A) and (B)