Most important factor to be considered in the selection of packings for absorbers is the __________ of packing. (A) Size (B) Durability (C) Porosity (D) Cost

Most important factor to be considered in the selection of packings for

absorbers is the __________ of packing.

(A) Size

(B) Durability

(C) Porosity

(D) Cost


by

1 Answer

Answer :

(C) Porosity

by

Related questions

In a moderately sized packed absorption tower, channelling (which is most severe with stacked packings) can be minimised by taking the ratio of tower diameter to packing diameter (A) > 4 :1 (B) < 8 : 1 (C) > 8:1 (D) < 6:1

Description : In a moderately sized packed absorption tower, channelling (which is most severe with stacked packings) can be minimised by taking the ratio of tower diameter to packing diameter (A) > 4 :1 (B) < 8 : 1 (C) > 8:1 (D) < 6:1

Last Answer : (C) > 8:1

Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the possibility of tower wall collapse (B) Packed towers are preferred over plate towers for handling corrosive and foamy liquids (C) Diameter of randomly packed tower is normally more than 1.2 metres (D) Due to uneven supply and improper distribution of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Description : Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the ... of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Last Answer : (C) Diameter of randomly packed tower is normally more than 1.2 metres

Factor apart from cost that determines the selection of an AC is a) It‘s appearance c) Power saving guide label b) It‘s type d) it‘s durability

Description : Factor apart from cost that determines the selection of an AC is a) It‘s appearance c) Power saving guide label b) It‘s type d) it‘s durability

Last Answer : Power saving guide label

Explain the criteria for selection of construction materials for different civil engineering Structures on basis of their strength and durability

Description : Explain the criteria for selection of construction materials for different civil engineering Structures on basis of their strength and durability

Last Answer : The material must be selected for their ability to support the loads imposed by the building over the whole life of the building. An appropriate structural system and correct selection of ... of the building. The construction material should have sufficient strength to carry the prescribed load.

Pick out the wrong statement (A) Co-current absorbers are usually used, when the gas to be dissolved in the liquid is a pure substance (B) In case of gas absorption, HETP is equal to HTU, when both the operating line & the equilibrium lines are parallel (C) Hatta number is important in case of gas absorption with chemical reaction (D) In actual practice, absorption is an endothermic process, while stripping is an exothermic process

Description : Pick out the wrong statement (A) Co-current absorbers are usually used, when the gas to be dissolved in the liquid is a pure substance (B) In case of gas absorption, HETP is ... reaction (D) In actual practice, absorption is an endothermic process, while stripping is an exothermic process

Last Answer : (D) In actual practice, absorption is an endothermic process, while stripping is an exothermic process

For absorbers, high pressure drop results in (A) Increased efficiency (B) Decreased efficiency (C) High operating cost (D) Better gas liquid contact

Description : For absorbers, high pressure drop results in (A) Increased efficiency (B) Decreased efficiency (C) High operating cost (D) Better gas liquid contact

Last Answer : (C) High operating cost

The size of the tetrahedral void in the closest packing of atoms is __________ that of the octahedral void. (A) Equal to (B) Greater than (C) Less than (D) Either (A), (B) or (C); depends on the size of atom

Description : The size of the tetrahedral void in the closest packing of atoms is __________ that of the octahedral void. (A) Equal to (B) Greater than (C) Less than (D) Either (A), (B) or (C); depends on the size of atom

Last Answer : (C) Less than

The most important advantage of a video disk is A) Compactness B) Potential capacity C) Durability D) Cost effectiveness

Description : The most important advantage of a video disk is A) Compactness B) Potential capacity C) Durability D) Cost effectiveness

Last Answer : Answer : B

The most important advantage of a video disk is a. Compactness b. Potential capacity c. Durability d. Cost effectiveness

Description : The most important advantage of a video disk is a. Compactness b. Potential capacity c. Durability d. Cost effectiveness

Last Answer : Compactness

The most important advantage of a video disk is a. Compactness b. Potential capacity c. Durability d. Cost effectiveness

Description : The most important advantage of a video disk is a. Compactness b. Potential capacity c. Durability d. Cost effectiveness

Last Answer : b. Potential capacity

Co-current absorbers are usually used when the gas to be dissolved in the liquid is (A) Sparingly soluble (B) Highly soluble (C) A pure substance (D) A mixture

Description : Co-current absorbers are usually used when the gas to be dissolved in the liquid is (A) Sparingly soluble (B) Highly soluble (C) A pure substance (D) A mixture

Last Answer : (C) A pure substance

Which of the following is not fixed by the process requirements, in the design of absorbers? (A) Flow rate of the entering gas (B) Composition of the entering liquid (C) Terminal concentrations of gas stream (D) None of these

Description : Which of the following is not fixed by the process requirements, in the design of absorbers? (A) Flow rate of the entering gas (B) Composition of the entering liquid (C) Terminal concentrations of gas stream (D) None of these

Last Answer : (D) None of these

According to IS:456-2000, the following type of environments are considered for durability of concrete [ A ] two [ B ] four [ C ] five [ D ] six

Description : According to IS:456-2000, the following type of environments are considered for durability of concrete [ A ] two [ B ] four [ C ] five [ D ] six

Last Answer : [ C ] five

According to IS:456-2000, the following type of environments are considered for durability of concrete [ A ] two [ B ] four [ C ] five [ D ] six

Description : According to IS:456-2000, the following type of environments are considered for durability of concrete [ A ] two [ B ] four [ C ] five [ D ] six

Last Answer : [ C ] five

A coalescer in a mixer-settler liquid-liquid extraction column (A) Comprises of thin bed of substances of extended surface having high porosity (B) Helps in increasing the bubble size entering the settler (C) Helps in increasing the settling rate of the bubbles (D) All 'a', 'b', & 'c'

Description :  A coalescer in a mixer-settler liquid-liquid extraction column (A) Comprises of thin bed of substances of extended surface having high porosity (B) Helps in increasing the bubble size entering the settler ... increasing the settling rate of the bubbles (D) All 'a', 'b', & 'c'

Last Answer : (D) All 'a', 'b', & 'c'

A gas (density = 1.5 kg/m3 , viscosity = 2 × 10 ‒5 kg/m.s) flowing through a packed bed (particle size = 0.5 cm, porosity = 0.5) at a superficial velocity of 2 m/s causes a pressure drop of 8400 Pa/m. The pressure drop for another gas, with density of 1.5 kg/m3and viscosity of 3 × 10 ‒5kg/m.s flowing at 3 m/s will be (A) 8400 Pa/m (B) 12600 Pa/m (C) 18900 Pa/m (D) 16800 Pa/m

Description : A gas (density = 1.5 kg/m3 , viscosity = 2 10 -5 kg/m.s) flowing through a packed bed (particle size = 0.5 cm, porosity = 0.5) at a superficial velocity of 2 m/s causes a pressure drop of 8400 Pa/m. The ... flowing at 3 m/s will be (A) 8400 Pa/m (B) 12600 Pa/m (C) 18900 Pa/m (D) 16800 Pa/m

Last Answer : (B) 12600 Pa/m

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below : Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, the minimum fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle ... fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Last Answer : (B) 16 mm/s

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below: Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, in actual operation, the above bed has a height = 1 m. What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system ... What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Last Answer : (C) 0.7

BET apparatus is used to determine the (A) Specific surface of a porous catalyst (B) Pore size distribution (C) Pore diameter (D) Porosity of the catalyst bed

Description : BET apparatus is used to determine the (A) Specific surface of a porous catalyst (B) Pore size distribution (C) Pore diameter (D) Porosity of the catalyst bed

Last Answer : (A) Specific surface of a porous catalyst

Powder metallurgy is used to produce (A) High precision components with complex cavities and sharp features (B) Components of large size (C) Porosity free components (D) Components of such alloys whose constituents do not form alloys readily

Description : Powder metallurgy is used to produce (A) High precision components with complex cavities and sharp features (B) Components of large size (C) Porosity free components (D) Components of such alloys whose constituents do not form alloys readily

Last Answer : (C) Porosity free components

In an absorber, HETP does not vary with the (A) Flow rate of liquid (B) Flow rate of gas (C) Type and size of packing (D) None of these

Description : In an absorber, HETP does not vary with the (A) Flow rate of liquid (B) Flow rate of gas (C) Type and size of packing (D) None of these

Last Answer : (D) None of these

Before constructing a dam, the factor to be considered for controlling sedimentation, is (A) Selection of dam site (B) Construction of check dams (C) Providing vegetation screens (D) All the above

Description : Before constructing a dam, the factor to be considered for controlling sedimentation, is (A) Selection of dam site (B) Construction of check dams (C) Providing vegetation screens (D) All the above

Last Answer : (D) All the above

The strength of durability of concrete depends upon. (a) Size of aggregates (b) Grading of aggregates (c) Moisture contents of aggregates (d) All of these.

Description : The strength of durability of concrete depends upon. (a) Size of aggregates (b) Grading of aggregates (c) Moisture contents of aggregates (d) All of these.

Last Answer : (d) All of these.

Addition of filter aid to the slurry before filtration is done to __________ of the cake. (A) Increase the porosity (B) Increase the compressibility co-efficient (C) Decrease the porosity (D) Decrease the compressibility co-efficient

Description : Addition of filter aid to the slurry before filtration is done to __________ of the cake. (A) Increase the porosity (B) Increase the compressibility co-efficient (C) Decrease the porosity (D) Decrease the compressibility co-efficient

Last Answer : (A) Increase the porosity

During coal carbonisation process, the conversion of semi-coke to coke is accompanied by an increase in the __________ of the mass. (A) Density (B) Porosity (C) Electrical resistivity (D) None of these

Description : During coal carbonisation process, the conversion of semi-coke to coke is accompanied by an increase in the __________ of the mass. (A) Density (B) Porosity (C) Electrical resistivity (D) None of these

Last Answer : (A) Density

Helium-mercury method can be used to determine the __________ of the catalyst particle. (A) Pore volume (B) Solid density (C) Porosity (D) All (A), (B), & (C)

Description : Helium-mercury method can be used to determine the __________ of the catalyst particle. (A) Pore volume (B) Solid density (C) Porosity (D) All (A), (B), & (C)

Last Answer : (D) All (A), (B), & (C)

Helium-mercury method is used for the measurement of the __________ of the catalyst. (A) Surface area (B) Porosity (C) Pore volume (D) Both (B) & (C)

Description : Helium-mercury method is used for the measurement of the __________ of the catalyst. (A) Surface area (B) Porosity (C) Pore volume (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

The most common packing used in industrial operations is __________ rings. (A) Raschig (B) Lessing (C) Cross-partition (D) Single spiral

Description : The most common packing used in industrial operations is __________ rings. (A) Raschig (B) Lessing (C) Cross-partition (D) Single spiral

Last Answer : (C) Cross-partition

In an absorption column, the flooding velocity for random packing is __________ that for stacked/regular packing. (A) Greater than (B) Smaller than (C) Equal to (D) Either (A), or (B); depends on the type of packing

Description : In an absorption column, the flooding velocity for random packing is __________ that for stacked/regular packing. (A) Greater than (B) Smaller than (C) Equal to (D) Either (A), or (B); depends on the type of packing

Last Answer : (B) Smaller than

Out of the following, the lowest packing of atoms exists in __________ crystal lattice structure. (A) Hexagonal close, packed (hcp) (B) Face centred cubic (fcc) (C) Body centred cubic (bcc) (D) Simple cubic

Description : Out of the following, the lowest packing of atoms exists in __________ crystal lattice structure. (A) Hexagonal close, packed (hcp) (B) Face centred cubic (fcc) (C) Body centred cubic (bcc) (D) Simple cubic

Last Answer : (D) Simple cubic

Closeness of packing is maximum in case of __________ crystal lattice. (A) Face centred (B) Simple cubic (C) Body centred (D) None of these

Description : Closeness of packing is maximum in case of __________ crystal lattice. (A) Face centred (B) Simple cubic (C) Body centred (D) None of these

Last Answer : (A) Face centred

There are one octahedral void and __________ tetrahedral void in the closest packing of atoms. (A) One (B) Two (C) Three (D) None of these

Description : There are one octahedral void and __________ tetrahedral void in the closest packing of atoms. (A) One (B) Two (C) Three (D) None of these

Last Answer : Option B

Do I need new shock absorbers for my soul?

Description : Do I need new shock absorbers for my soul?

Last Answer : I must have pretty good shocks, because I don’t get shocked often. You may a bit sensitive, but that’s just my opinion. People have always been doing crazy things.

What are absorbers of radiation?

Description : What are absorbers of radiation?

Last Answer : Need answer

Light coloured clothes are preferred in summer because (a) light colours are good radiators of heat (b) light colours are poor absorbers of heat (c) they soak sweat faster (d) they allow body heat to escape faster

Description : Light coloured clothes are preferred in summer because (a) light colours are good radiators of heat (b) light colours are poor absorbers of heat (c) they soak sweat faster (d) they allow body heat to escape faster

Last Answer : Ans:(b)

Woollens keep us warm in winter because they (a) produce more warmth (b) are good absorbers of heat (c) do not allow our body heat to escape (d) do not allow cool air to enter

Description : Woollens keep us warm in winter because they (a) produce more warmth (b) are good absorbers of heat (c) do not allow our body heat to escape (d) do not allow cool air to enter

Last Answer : Ans:(c)

'Shock-absorbers are usually made of steel as it – (1) is not brittle (2) has lower elasticity (3) has higher elasticity (4) has no ductile property

Description : 'Shock-absorbers are usually made of steel as it – (1) is not brittle (2) has lower elasticity (3) has higher elasticity (4) has no ductile property

Last Answer : (3) has higher elasticity Explanation: A shock absorber is a mechanical device designed to smooth out or damp shock impulse, and dissipate kinetic energy. Steel is an alloy made by combining iron and other elements, the most common of these being carbon.

Shock absorbers are usually mode of steel as it

Description : Shock absorbers are usually mode of steel as it

Last Answer : Has Higher elasticity

The vibrations can be controlled by A. Controlling the natural frequencies B. Using proper damping devices C. Introducing vibration absorbers and vibration isolators D. All the above

Description : The vibrations can be controlled by A. Controlling the natural frequencies B. Using proper damping devices C. Introducing vibration absorbers and vibration isolators D. All the above

Last Answer : D. All the above

Shock absorbers are usually mode of steel as it?

Description : Shock absorbers are usually mode of steel as it?

Last Answer : Has Higher elasticity

'Shock-absorbers' are usually made of steel as it : (1) is not brittle (2) has lower elasticity (3) has higher elasticity (4) has no ductile property

Description : 'Shock-absorbers' are usually made of steel as it : (1) is not brittle (2) has lower elasticity (3) has higher elasticity (4) has no ductile property

Last Answer : has higher elasticity

Surge absorbers are used for protection against

Description : Surge absorbers are used for protection against

Last Answer : Surge absorbers are used for protection against low voltage high frequency oscillations

The __________ property states that the system must have a mechanism to recover from committed transactions should that be necessary. a) Atomicity CSE-R17.BLOGSPOT.COM b) Consistencyc) Isolation d) Durability

Description : The __________ property states that the system must have a mechanism to recover from committed transactions should that be necessary. a) Atomicity CSE-R17.BLOGSPOT.COM b) Consistencyc) Isolation d) Durability

Last Answer : Durability

If pore diffusion is the controlling step in a solid catalysed reaction, the catalyst (A) Porosity is very important (B) Porosity is of less importance (C) Internal surface area is utilised efficiently (D) None of these

Description : If pore diffusion is the controlling step in a solid catalysed reaction, the catalyst (A) Porosity is very important (B) Porosity is of less importance (C) Internal surface area is utilised efficiently (D) None of these

Last Answer : (B) Porosity is of less importance

State the factors to be considered for selection of shape and size of the car of elevator.

Description : State the factors to be considered for selection of shape and size of the car of elevator.

Last Answer : The size and shape of elevator car depends on following factors:  i) No. of passenger to be carried: While selecting the size of car it is a usual practice to allow. A Space of 2 Sq. ... of elevator depends on space available in building.  iii) Type of building  iv) Application of elevator

The most important advantage of a video disk is a. Compactness b. Potential capacity c. Durability

Description : The most important advantage of a video disk is a. Compactness b. Potential capacity c. Durability

Last Answer : b. Potential capacity

The advantage of reinforced concrete, is due to (A) Monolithic character (B) Fire-resisting and durability (C) Economy because of less maintenance cost (D) All the abov

Description : The advantage of reinforced concrete, is due to (A) Monolithic character (B) Fire-resisting and durability (C) Economy because of less maintenance cost (D) All the abov

Last Answer : Answer: Option D

What is the challenge with electric vehicles? A] Vehicle durability B] Cell life C] Cost D] Both A and B

Description : What is the challenge with electric vehicles? A] Vehicle durability B] Cell life C] Cost D] Both A and B

Last Answer : D] Both A and B

Which of the following is the major consideration to evolve a good design ? (a) Cost (b) Durability (c) Compliance with performance criteria as laid down in specifications (d) All of the above

Description : Which of the following is the major consideration to evolve a good design ? (a) Cost (b) Durability (c) Compliance with performance criteria as laid down in specifications (d) All of the above

Last Answer : (d) All of the above