State the factors to be considered for selection of shape and size of the car of elevator.

State the factors to be considered for selection of shape and size of the car of elevator.

by

1 Answer

Answer :

The size and shape of elevator car depends on following factors: 

i) No. of passenger to be carried: While selecting the size of car it is a usual practice to allow. A Space of 2 Sq.fit/ person. Average weight of passenger is assumed 68 kg/person. Thus the maximum load capacity of elevator is considered 34 kg/sq.ft There should be wide frontage and shallow depth 

ii) Limitation in the building design: Shape of elevator depends on space available in building. 

iii) Type of building 

iv) Application of elevator

by

Related questions

Explain the requirements of elevator motor. State with reason best suitable motor for elevator.

Description : Explain the requirements of elevator motor. State with reason best suitable motor for elevator.

Last Answer : Ideal requirements of elevator motor: 1. High starting torque along with high rate of acceleration and retardation. 2. Motors are compact in size especially smaller in diameter. 3. Speed of motor should not exceed 900 ... 4. Permanent magnet AC Motor. 5. Split Phase AC I.M. 6. Capacitor Start I.M.

State any factors to be considered while selecting electrical welding system.

Description : State any factors to be considered while selecting electrical welding system.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Explain the factors to be considered while designing a lighting scheme.

Description : Explain the factors to be considered while designing a lighting scheme.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Explain the factors affecting framing of tariffs.

Description : Explain the factors affecting framing of tariffs.

Last Answer : Factors affecting framing of tariffs:- 1. Total recovery of all taxes , duties and other charges 2. Expenses on premium (installment) paid to insurance company. 3. T&D losses. 4. Electricity cannot ... L.F. 12. The tariff should be simple cheap and capable of easy explanation to consumers. 

State the factors to be considered for control valve selection.

Description : State the factors to be considered for control valve selection.

Last Answer : Factors to be considered for control valve selection: The basic steps in control valve selection are 1. The first step in control valve selection involves collecting all relevant data and completing the ... force or friction. A hand wheel is needed if manual operation of the valve is expected.

What Are The Factors To Be Considered In The Selection Of Materials For A Machine Element?

Description : What Are The Factors To Be Considered In The Selection Of Materials For A Machine Element?

Last Answer : While selecting a material for a machine element, the following factors are to be considered 1. Required material properties 2. Manufacturing ease 3. Material availability 4. Cost

Discuss the factors considered for selection of pump

Description : Discuss the factors considered for selection of pump

Last Answer : 1) Pressure: Pump is ued to pressurize the fluid in system according to need of pressure we can select pump as below 2) Speed of pump: if the speed of pump is increased beyond its ... according to application we can choose it by economical aspect cost of pump & its spares should be less.

What are the factors to be considered while selection of motors for different drives?

Description : What are the factors to be considered while selection of motors for different drives?

Last Answer : Following Factors are considered while selecting electric drive (Motor) for particular application:  Factors to be considered for selection of Electrical Drives:  1) Nature of Supply:- Whether supply ... , load equalization 7) Cost: - Capital, Running and maintenance cost should be less.  

Most important factor to be considered in the selection of packings for absorbers is the __________ of packing. (A) Size (B) Durability (C) Porosity (D) Cost

Description : Most important factor to be considered in the selection of packings for absorbers is the __________ of packing. (A) Size (B) Durability (C) Porosity (D) Cost

Last Answer : (C) Porosity

To achieve optimum cavity preparation, which of the following factors of internal anatomy must be considered in root canal treatment: A. Outline form B. The age and shape of pulp chamber; in addition to the direction of individual root canals. C. Internal external relationship D. Intra-coronal preparation E. None of the above

Description : To achieve optimum cavity preparation, which of the following factors of internal anatomy must be considered in root canal treatment: A. Outline form B. The age and shape of pulp chamber; in ... root canals. C. Internal external relationship D. Intra-coronal preparation E. None of the above

Last Answer : B. The age and shape of pulp chamber; in addition to the direction of individual root canals.

The most suitable equipment for the transportation of 200 mesh size particles is a (A) Bucket elevator (B) Pneumatic conveyor (C) Screw conveyor (D) Belt conveyor

Description : The most suitable equipment for the transportation of 200 mesh size particles is a (A) Bucket elevator (B) Pneumatic conveyor (C) Screw conveyor (D) Belt conveyor

Last Answer : (B) Pneumatic conveyor

If the scaling factors values Sx and Sy < 1 then a.It reduces the size of object b.It increases the size of object c.It stunts the shape of an object d.None

Description : If the scaling factors values Sx and Sy < 1 then a.It reduces the size of object b.It increases the size of object c.It stunts the shape of an object d.None

Last Answer : a.It reduces the size of object

Which of the following factors affect the mechanical properties of a material under applied loads? a) Content of alloys b) Grain size c) Imperfection and defects d) Shape of material

Description : Which of the following factors affect the mechanical properties of a material under applied loads? a) Content of alloys b) Grain size c) Imperfection and defects d) Shape of material

Last Answer : d) Shape of material

Stoke's law states that the velocity at which a grain settles out of suspension, the other factors remaining constant, is dependent upon (A) Shape of grain (B) Weight of grain (C) Size of grain (D) Shape, size and weight of grain

Description : Stoke's law states that the velocity at which a grain settles out of suspension, the other factors remaining constant, is dependent upon (A) Shape of grain (B) Weight of grain (C) Size of grain (D) Shape, size and weight of grain

Last Answer : Answer: Option D

What three factors determine the type, size, and shape of an antenna?

Description : What three factors determine the type, size, and shape of an antenna?

Last Answer : Frequency of operation of the transmitter, amount of power to be radiated, and general direction of the receiving set.

Which of the following factors can affect the shape and size of the pulp canal: A. Chemical irritation and caries B. Trauma and function C. Attrition, wear and aging of the patient D. All of the above

Description : Which of the following factors can affect the shape and size of the pulp canal: A. Chemical irritation and caries B. Trauma and function C. Attrition, wear and aging of the patient D. All of the above

Last Answer : D. All of the above

State four advantages of seam welding over spot welding.

Description : State four advantages of seam welding over spot welding.

Last Answer : Advantages of seam welding over spot welding:- 1. Due to seam welding we get continuous weld which is air-tight 2. Gas tight as well as liquid tight joints can be made. 3. The Overlap is ... . The production of single seam weld and parallel seams can be got simultaneously. 5. Efficient energy use.

State desirable properties of heating elements used in indirect resistance heating.

Description : State desirable properties of heating elements used in indirect resistance heating. 

Last Answer : Following properties of good heating material in indirect resistance heating:- 1. High resistivity: It should have high resistivity. So that it becomes compact in size and produces more heat with small ... , it should have low temperature co-efficient of resistance. 10.It should not be brittle.

Explain with the diagram butt welding. State its applications.

Description : Explain with the diagram butt welding. State its applications. 

Last Answer : Diagram butt welding:-  Explanation: Transformer used for welding is designed for low voltage and high current secondary. Transformer is oil cooled The job is clamped as shown in fig. two parts which ... : 1) For welding rod, wire, pipe etc 2) For joining thick metal plates or bars at end

State its types electrical braking.

Description : State its types electrical braking.

Last Answer : Types of Electrical Braking: Electrical braking system: 1. Plugging 2. Rheostatic (Dynamic) Braking 3. Regenerative Braking 4. Electromagnetic Braking 5. Eddy current braking

State any four desirable characteristics of ideal traction motor. State the names of different traction motor used.

Description : State any four desirable characteristics of ideal traction motor. State the names of different traction motor used.

Last Answer : Desirable characteristics of ideal traction motors:-  A) Mechanical Properties or characteristics: 1) It should be robust in construction to withstand against continuous vibrations. 2) Weight of motor per HP ... AC series motor 3. 3-Ph, Slip-ring induction motor 4. Linear induction motor (LIM)

State two advantages of P.F. tariff and TOD tariff for the power system concern

Description : State two advantages of P.F. tariff and TOD tariff for the power system concern

Last Answer : time of day tariff:_ In time of day tariff structure incentives for power draw during peak off hours & extra charges for power draw during peak hours are built in. advantages:- 1. TOD tariff encourage ... advantages:-  1. kva rating of equipment reduces 2.due to high p.f less electricity bill.

State the four requirements of Tariff.

Description : State the four requirements of Tariff. 

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

State disadvantages of low power factor.

Description : State disadvantages of low power factor.

Last Answer : Due to low power factor The load draws high current. High cu losses. Efficiency decreases. Voltage regulation increases Temperature increases May break down  the insulation.

State eight requirements of an ideal traction system.

Description : State eight requirements of an ideal traction system.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

State the four causes of low (poor) power factor.

Description : State the four causes of low (poor) power factor.

Last Answer : Following are the Causes of low power factor: - 1. Magnitude of Magnetizing Current :- As magnetizing current increases, power factor reduces. 2. Due to use of Induction Motor:- Most of industrial ... and maintenance:- P.f. falls if proper maintenance or repairs of equipments are not done. 

State any two applications of each for the following types of electrical heating : (i) Direct resistance heating(ii) Indirect induction heating (iii) Direct.arc heating (iv) Dielectric heating

Description : State any two applications of each for the following types of electrical heating : (i) Direct resistance heating(ii) Indirect induction heating (iii) Direct.arc heating (iv) Dielectric heating

Last Answer : (i) Direct resistance heating:- 1. This type of heating used for industrial purpose 2. Salt bath heating: This utilized for the purpose of carbonizing, tempering, quenching and hardening of steel tools 3. ... purpose. 14)In foundry for heating of sand, core, which are used in molding processes.

Draw a neat labelled block diagram of AC electric locomotive. State the function of each part.

Description : Draw a neat labelled block diagram of AC electric locomotive. State the function of each part.

Last Answer : labelled diagram ofAC electric locomotive:  Function of AC electric locomotive Parts: 1) Overhead contact wire: Supply of 1-ph, 25KV, 50Hz, AC is given to overhead conductor. 2) Current collecting ... mechanical power to run the train i.e. DC series motor which is used as traction motor.

State any eight advantages of electric heating.

Description :  State any eight advantages of electric heating.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

State advantages and disadvantages of electric braking over mechanical braking.

Description : State advantages and disadvantages of electric braking over mechanical braking.

Last Answer : Advantages: 1. It is most reliable braking system. 2. Breaking actuation time is small as higher value of braking retardation is obtained. 3. Electrical braking is smooth & gradual. 4. Life of ... energy is surplus. 4. Initial cost is more due to other control equipments & circuitry. 

State the various types of welding.

Description : State the various types of welding.

Last Answer : i) Resistance Welding:- 1) Spot welding 2) Seam welding 3) Projection Welding 4) Butt Welding- i) Simple butt welding ii) Flash butt welding   ii) Arc welding:- 1) Carbon Arc Welding: a) shielded welding b) unshielded welding 2) Metal Arc Welding: a) shielded welding b) unshielded welding

State the principle of induction heating. Write four applications of induction heating.

Description : State the principle of induction heating. Write four applications of induction heating.

Last Answer : Principle of Induction heating: The basic principle of induction heating is that, supply is given to primary winding of furnace transformer & heat is produced in the secondary (charge) due to ... utilized to melt the charge. Where, R = Resistance of charge & I secondary current

State the causes of failure of heating element.

Description : State the causes of failure of heating element.

Last Answer : Following of the different causes of failure of heating element:  i) Formation of hot spot: Hot spot on heating element is the point which is at higher temperature than remaining heating element ... & cooling of heating element, it may break (fail) due to small mechanical injury also.

Why the Archimedes' principle is not valid in case of an elevator accelerating upwards but it is valid for a car accelerating on a level road?

Description : Why the Archimedes' principle is not valid in case of an elevator accelerating upwards but it is valid for a car accelerating on a level road?

Last Answer : Need answer

State the factors affecting selection of construction materials.

Description : State the factors affecting selection of construction materials.

Last Answer : Following are the various factors being considered for selection of construction material. 1) Prescribed load: It is a design load which can be taken by the construction material. The ... the eco-system of environment and the required material should be eco-friendly or environmentally friendly.

State the factors on which the selection of type of materials depend.

Description : State the factors on which the selection of type of materials depend. 

Last Answer : Factors for selection of materials. 1. Carry prescribed loads: The most significant requirement of a material used in civil engineering project is that it should be able to carry the design loads ... such as floor coverings, paints, and doors and window are chosen based on aesthetic consideration.

Give detail classification of welding. State important factors upon which selection of welding process depends.

Description : Give detail classification of welding. State important factors upon which selection of welding process depends. 

Last Answer : Answer: Classification of Welding 1. Arc welding a. Carbon Arc Welding; b. Shielded Metal Arc Welding (SMAW) c. Submerged Arc Welding (SAW) d. Metal Inert Gas Welding (MIG, ... workers 14. Cost of materials 15. Code or specification requirements 16. Mechanical properties desired in joints 

Write factors used for governing the selection of cogeneration system and state the advantages of cogeneration.

Description : Write factors used for governing the selection of cogeneration system and state the advantages of cogeneration.

Last Answer : Factor governing the selection of cogeneration system: 1) electrical load matching 2) thermal load matching 3) Electrical load matching 4) Thermal load matching 5)Thermal to electrical energy ... ) Very high efficiency. 4) Reduction in emission of pollutants due to reduced fuel consumption.

State factors for selection of motors as drive.

Description : State factors for selection of motors as drive.

Last Answer : Following Factors governing / or are considered while selecting electric drive (Motor) for particular application: Factors to be considered for selection of Electrical Drives: 1) Nature of Supply:- ... level, load equalization 7) Cost: - Capital, Running and maintenance cost should be less.

State the various factors governing selection of site for TPS.

Description : State the various factors governing selection of site for TPS. 

Last Answer : Following various factors governing selection of site for TPS.:- 1. It should locate near coal mines. 2. Sufficient quantity of water should be available. 3. Sufficient large space should ... availalbe nearly. To the extent possible, the thermal station should be far away from an aerodrome   

State and explain the factors that govern the selection of cogeneration system for an industry.

Description : State and explain the factors that govern the selection of cogeneration system for an industry.

Last Answer : The factors that govern the selection of cogeneration system for an industry: The factors that govern the selection of cogeneration systems are very much site/situation specific. The local factors ... require is generated. If required energy demand is higher electricity purchased from grid. 

State and explain any four factors governing selection of induction motor.

Description : State and explain any four factors governing selection of induction motor.

Last Answer : The factors governing the selection of Induction motor: 1) Load torque required at normal speed matches with available torque of motor. 2) Break down torque or pull out torque or maximum torque ... If selecting energy efficient motor the cost benefit analysis over the long run must be worked out.

State any four factors for selection of hydro power plant site.

Description : State any four factors for selection of hydro power plant site. 

Last Answer : Following Factors to be kept while site selecting for Hydro power plant: 1) Quantity of water available :-Where high rainfall occures so that sufficent quantity of water can be stored for generation of ... be possible to divert the stream. 11. Sand, gravel, etc., should be available nearby.

State any four factors for selection of site of wind power plant.

Description : State any four factors for selection of site of wind power plant.

Last Answer : The Factors for selection of site for Wind Mills: 1) The site should be selected where winds are strong i.e. where pressure of wind is high and there is continuity (14.4- 16.2 km/h) ... 50m of the turbine which can affect the system's overall performance 10)Possibility to connect to power grid. 

State any four factors governing Selection of site for thermal power station.

Description : State any four factors governing Selection of site for thermal power station. 

Last Answer : Following Factors are to be considered:- 1. It should locate near coal mine. 2. Sufficient quantity of water should be available. 3. Sufficient large space should be available. 4. It should be located ... laws of the land and the town planning. 14. The interests of national defense must be served.

Applications of Dielectric Heating

Description : Applications of Dielectric Heating

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Differentiate between core type and core less induction furnace.

Description : Differentiate between core type and core less induction furnace.

Last Answer : Sr.No. Core type induction furnace. Core less induction furnace. 1 Less leakage flux  More leakage flux 2 Power factor is good Power factor is poor 3 ... normal frequency is used. Due to high frequency, high voltage supply, time required for heating is less.

Justify the use of saturable reactor to control the magnitude of welding current.

Description :  Justify the use of saturable reactor to control the magnitude of welding current.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Explain with neat diagram construction and working of Ajax Wyatt vertical core induction furnace.

Description : Explain with neat diagram construction and working of Ajax Wyatt vertical core induction furnace.

Last Answer : Neat sketch of Ajax Wyatt' vertical core furnace: Construction of Ajax Wyatt' vertical core furnace: Vertical core type induction heating furnace is nothing but transformer. It consists of ... is utilized to melt the charge. Where, R = Resistance of charge & I secondary current.

Explain the suitability of 3-phase induction motor for traction service.

Description : Explain the suitability of 3-phase induction motor for traction service. 

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }