Leaching rate is independent of the (A) Agitation (B) Temperature (C) Particle size (D) None of these

Question

Leaching rate is independent of the (A) Agitation (B) Temperature (C) Particle size (D) None of these

Leaching rate is independent of the

(A) Agitation

(B) Temperature

(C) Particle size

(D) None of these

asked Dec 6, 2021 by prathmesh

1 Answer

Related questions

Leaching of coarse solid lumps is also termed as(A) Decoction (B) Dissolution (C) Percolation (D) Agitation and settling

Description : Leaching of coarse solid lumps is also termed as (A) Decoction (B) Dissolution (C) Percolation (D) Agitation and settling

Last Answer : (C) Percolation

Rate of leaching increases with increasing (A) Temperature (B) Viscosity of solvent (C) Pressure (D) Size of the solid

Description : Rate of leaching increases with increasing (A) Temperature (B) Viscosity of solvent (C) Pressure (D) Size of the solid

Last Answer : (A) Temperature

During agitation of liquids, the (A) Froude number is independent for the curves between power number and Reynolds number in baffled system (B) Power number becomes independent of impellers Reynolds number at high Reynolds number, but is dependent on the geometry of the impeller (C) Froude number is used to account for the effect of surface (e.g., the centre vortex) on the power number (D) All (A), (B) and (C)

Description : During agitation of liquids, the (A) Froude number is independent for the curves between power number and Reynolds number in baffled system (B) Power number becomes independent of impellers Reynolds number at high Reynolds number, ... , the centre vortex) on the power number (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

With increase in temperature, the rate of extraction in leaching (solidliquid extraction system). (A) Increases (B) Decreases (C) Remain unaffected (D) Increases Linearly

Description : With increase in temperature, the rate of extraction in leaching (solidliquid extraction system). (A) Increases (B) Decreases (C) Remain unaffected (D) Increases Linearly

Last Answer : (A) Increases

With increase in temperature, the rate of leaching increases, because the (A) Diffusivity of solute increases (B) Viscosity of solvent decreases (C) Thermal conductivity of solute increases (D) None of these

Description : With increase in temperature, the rate of leaching increases, because the (A) Diffusivity of solute increases (B) Viscosity of solvent decreases (C) Thermal conductivity of solute increases (D) None of these

Last Answer : (A) Diffusivity of solute increases

With increase in temperature, the leaching rate increases because of the (A) Increased diffusivity (B) Decreased viscosity of liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the leaching rate increases because of the (A) Increased diffusivity (B) Decreased viscosity of liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

With increase in temperature, the leaching rate increases due to (A) Decreased liquid viscosity (B) Increased diffusivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the leaching rate increases due to (A) Decreased liquid viscosity (B) Increased diffusivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Which of the following is not categorised as a "mechanical operation”? (A) Agitation (B) Filtration (C) Size enlargement (D) Humidification

Description : Which of the following is not categorised as a "mechanical operation”? (A) Agitation (B) Filtration (C) Size enlargement (D) Humidification

Last Answer : (D) Humidification

Pick out the wrong statement. (A) Mechanical agitation is required, if the system has low interfacial tension (B) Sieve tray towers are generally used for systems having low interfacial tension (C) When Henry's law constant is very small, then the mass transfer rate is controlled by the gas film resistance (D) Taylor-Prandtl analogy for heat and mass transfer considers the transfer through both laminar and turbulent layers

Description : Pick out the wrong statement. (A) Mechanical agitation is required, if the system has low interfacial tension (B) Sieve tray towers are generally used for systems having low ... Prandtl analogy for heat and mass transfer considers the transfer through both laminar and turbulent layers

Last Answer : (A) Mechanical agitation is required, if the system has low interfacial tension

Pick out the wrong statement. (A) α-particle emission from a radioactive element makes it electrically negative (B) β-particle emission from a radioactive element makes it electrically positive (C) A radioactive element having a half life period of 20 years will completely disintegrated in 40 years (D) The disintegration constant of a radioactive isotope is independent of pressure, temperature or concentration

Description : Pick out the wrong statement. (A) α-particle emission from a radioactive element makes it electrically negative (B) β-particle emission from a radioactive element makes it electrically ... ) The disintegration constant of a radioactive isotope is independent of pressure, temperature or concentration

Last Answer : (C) A radioactive element having a half life period of 20 years will completely disintegrated in 40 years

Stage efficiency in a leaching process depends on the (A) Time of contact between the solid and the solution (B) Rate of diffusion of the solute through the solid and into the liquid (C) Both (A) and (B) (D) Vapour pressure of the solution

Description : Stage efficiency in a leaching process depends on the (A) Time of contact between the solid and the solution (B) Rate of diffusion of the solute through the solid and into the liquid (C) Both (A) and (B) (D) Vapour pressure of the solution

Last Answer : (C) Both (A) and (B)

Considered as the main source of an internal noise. A. Device imperfection B. Thermal agitation C. Temperature change D. Flicker

Description : Considered as the main source of an internal noise. A. Device imperfection B. Thermal agitation C. Temperature change D. Flicker

Last Answer : B. Thermal agitation

Pick out the wrong statement pertaining to leaching. (A) Fine solids cannot be leached in a Pachuca tank (B) Door classifier can be used for leaching of coarse solids (C) Vegetable seeds can be leached in either of Bollman extractor, Rotocel or Kennedy extractor (D) Very high temperature is not needed for the leaching of sugar beet

Description : Pick out the wrong statement pertaining to leaching. (A) Fine solids cannot be leached in a Pachuca tank (B) Door classifier can be used for leaching of coarse solids (C) Vegetable seeds can be ... , Rotocel or Kennedy extractor (D) Very high temperature is not needed for the leaching of sugar beet

Last Answer : (A) Fine solids cannot be leached in a Pachuca tank

In the manufacture of ortho-phosphoric acid by strong H2SO4 leaching wet process, keeping the reactor temperature above 100°C, results in the formation of undesirable (A) CaSO4 .½ H2O and CaSO4 crystals (B) Pyrophosphoric acid (C) Meta-phosphoric acid (D) All (A), (B) and (C)

Description : In the manufacture of ortho-phosphoric acid by strong H2SO4 leaching wet process, keeping the reactor temperature above 100°C, results in the formation of undesirable (A) CaSO4 .½ H2O and CaSO4 crystals (B) Pyrophosphoric acid (C) Meta-phosphoric acid (D) All (A), (B) and (C)

Last Answer : (A) CaSO4 .½ H2O and CaSO4 crystals

Puddling is done to achieve : a. Soft soil bed b. Non leaching of water c. Size reduction of clods d. Conservation of moisture

Description : Puddling is done to achieve : a. Soft soil bed b. Non leaching of water c. Size reduction of clods d. Conservation of moisture

Last Answer : b. Non leaching of water

In the Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass is __________ the fluid viscosity. (A) Directly proportional to (B) Inversely proportional to (C) Inversely proportional to the square root of (D) Independent of

Description : In the Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass is __________ the fluid viscosity. (A) Directly proportional to (B) Inversely proportional to (C) Inversely proportional to the square root of (D) Independent of

Last Answer : (B) Inversely proportional to

Which one of the following processes during decomposition is correctly described? (a) Catabolism – Last step in the decomposition under fully anaerobic condition (b) Leaching – Water soluble inorganic nutrients rise to the top layers of soil (c) Fragmentation – Carried out by organisms such as earthworm (d) Humification – Leads to the accumulation of a dark coloured substance humus which undergoes microbial action at a very fast rate.

Description : Which one of the following processes during decomposition is correctly described? (a) Catabolism - Last step in the decomposition under fully anaerobic condition (b) Leaching - Water soluble inorganic ... of a dark coloured substance humus which undergoes microbial action at a very fast rate.

Last Answer : (c) Fragmentation – Carried out by organisms such as earthworm

Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity(C) Surface tension(D) Density

Description : Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity (C) Surface tension (D) Density

Last Answer : (D) Density

Which of the following is not accomplished by agitation of liquids in agitators? (A) Dispersing gas in liquid (B) Blending of immiscible liquids (C) Dispersing immiscible liquid in form of emulsion (D) Suspending solid particles

Description : Which of the following is not accomplished by agitation of liquids in agitators? (A) Dispersing gas in liquid (B) Blending of immiscible liquids (C) Dispersing immiscible liquid in form of emulsion (D) Suspending solid particles

Last Answer : (B) Blending of immiscible liquids

During agitation of liquids, power consumption during laminar flow is not proportional to the (A) Density of the liquid (B) Viscosity of the liquid (C) Cube of impeller diameters (D) Square of rotational speed

Description : During agitation of liquids, power consumption during laminar flow is not proportional to the (A) Density of the liquid (B) Viscosity of the liquid (C) Cube of impeller diameters (D) Square of rotational speed

Last Answer : (A) Density of the liquid

About 2-3 hp, power per gallon of a thin liquid provides vigorous agitation in an agitator. 'Power number' in agitation is given by (A) P. gc /n 3 . D2 . ρ (B) P. gc . ρ/µ

Description : About 2-3 hp, power per gallon of a thin liquid provides vigorous agitation in an agitator. 'Power number' in agitation is given by (A) P. gc /n 3 . D2 . ρ (B) P. gc . ρ/µ

Last Answer : (A) P. gc /n 3 . D2 . ρ

Laminar flow region is said to exist during agitation of a liquid in an agitator, when the value of Reynolds number is (A) > 10 (B) < 10 (C) > 100 (D) < 100

Description : Laminar flow region is said to exist during agitation of a liquid in an agitator, when the value of Reynolds number is (A) > 10 (B) < 10 (C) > 100 (D) < 100

Last Answer : (B) < 10

Height of liquid in agitation tank is normally maintained equal to the tank diameter. However, if the tank is too tall and a large liquid hold up is desired, then two or more impellers mounted on the same shaft may be used. The clearance between the tank bottom and the bottom most impeller should be about (where, D = impeller diameter) (A) 0.5 D (B) D (C) 1.5 D (D) 2 D

Description : Height of liquid in agitation tank is normally maintained equal to the tank diameter. However, if the tank is too tall and a large liquid hold up is desired, then two or more impellers mounted on the same shaft may be used. The ... where, D = impeller diameter) (A) 0.5 D (B) D (C) 1.5 D (D) 2 D

Last Answer : (B) D

Nucleate boiling is promoted (A) On polished surfaces (B) On rough surfaces (C) In the absence of agitation (D) None of these

Description : Nucleate boiling is promoted (A) On polished surfaces (B) On rough surfaces (C) In the absence of agitation (D) None of these

Last Answer : (B) On rough surfaces

Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger calculations (Δt) weighted is used in place of Δt, when it involves more than one sequence of heating or cooling i.e., desuperheating & condensation or condensation & sub-cooling (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted (D) In case of short tube vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted

The earth's gravitational force field is said to be conservative force field because a.The work acted by the earth's gravitational field on a particle is independent on the path traced out by the particle b.The work acted by the erth's gravitational field will cause same path for all particles irrespective of their mass c.The direction of gravitational force is fixed d.The gravitational field has only single directional component always acting normal to a body e.The value of gravitational force rise is fixed

Description : The earth's gravitational force field is said to be conservative force field because a.The work acted by the earth's gravitational field on a particle is independent on the path traced out by ... directional component always acting normal to a body e.The value of gravitational force rise is fixed

Last Answer : a. The work acted by the earth's gravitational field on a particle is independent on the path traced out by the particle

According to special theory of relativity the mass of a particle – (1) increases with increase in velocity with respect to an observer. (2) decreases with increase in velocity. (3) decreases with decrease in velocity. (4) is independent of its velocity.

Description : According to special theory of relativity the mass of a particle – (1) increases with increase in velocity with respect to an observer. (2) decreases with increase in velocity. (3) decreases with decrease in velocity. (4) is independent of its velocity.

Last Answer : (1) increases with increase in velocity with respect to an observer. Explanation: According to the Special Theory of Relativity, the mass of a moving object measures more as its velocity increases until, ... becomes infinite. This is because as an object gains speed, it gains more (kinetic) energy.

The period of oscillation of a particle undergoing simple harmonic motion is: w) independent of the amplitude of the motion x) directly proportional to the frequency of oscillation y) independent of the frequency of oscillation z) none of the above

Description : The period of oscillation of a particle undergoing simple harmonic motion is: w) independent of the amplitude of the motion x) directly proportional to the frequency of oscillation y) independent of the frequency of oscillation z) none of the above

Last Answer : ANSWER: W -- INDEPENDENT OF THE AMPLITUDE OF THE MOTION

According to special theory of relativity the mass of a particle (1) increases with increase in velocity with respect to an observer. (2) decreases with increase in velocity. (3) decreases with decrease in velocity. (4) is independent of its velocity.

Description : According to special theory of relativity the mass of a particle (1) increases with increase in velocity with respect to an observer. (2) decreases with increase in velocity. (3) decreases with decrease in velocity. (4) is independent of its velocity.

Last Answer : increases with increase in velocity with respect to an observer.

which river project faced the public agitation in Gujarat? -Geography

Description : which river project faced the public agitation in Gujarat? -Geography

Last Answer : Sabarmati -basin The Sabarmati-basin farmers had agitated because the water supply was provided to urban areas even at the time of drought and it became difficult for them to irrigate.

How did the agitation bring about the ‘real awakening of India’ as Gandhiji said later? -SST 10th

Description : How did the agitation bring about the ‘real awakening of India’ as Gandhiji said later? -SST 10th

Last Answer : The agitation brought about real awakening' through its programmes like the Swadeshi and Boycott Movements, involvement of masses in this movement, involving women and youth, popularising the concept ... draw a wedge between the two communities. The cry Vande-Mataram filled the air everywhere.

Anti-Partition Agitation of 1905 was essentially aimed at undoing the Partition of Bengal. -SST 10th

Description : Anti-Partition Agitation of 1905 was essentially aimed at undoing the Partition of Bengal. -SST 10th

Last Answer : The Anti-Partition Agitation suffered from many limitations which are often described as causes of the failure of the Movement. First of all the agitationists though spoke about overthrowing the ... in 1907. These limitations however don't undermine the significance of the Anti-Partition Movement.

Who led the agitation against the Partition of Bengal (1905) ? -General Knowledge

Description : Who led the agitation against the Partition of Bengal (1905) ? -General Knowledge

Last Answer : The answer is 'Surendranath Banerjee'

In which movements Bande Mataram was adopted as a slogan for agitation? -Do You Know?