Mass transfer co-efficient is directly proportional to DAB 0.5 , according to __________ theory. (A) Penetration (B) Surface renewal (C) Film (D) None of these

Mass transfer co-efficient is directly proportional to DAB

0.5

, according

to __________ theory.

(A) Penetration

(B) Surface renewal

(C) Film

(D) None of these


by

1 Answer

Answer :

(A) Penetration

by

Related questions

Mass transfer co-efficient is directly proportional to DAB according to the __________ theory. (A) Film (B) Penetration (C) Surface-renewal (D) None of these

Description : Mass transfer co-efficient is directly proportional to DAB according to the __________ theory. (A) Film (B) Penetration (C) Surface-renewal (D) None of these

Last Answer : (A) Film

Calculation of mass transfer co-efficient is mostly/normally done using __________ theory. (A) Surface renewal (B) Film (C) Penetration (D) None of these

Description : Calculation of mass transfer co-efficient is mostly/normally done using __________ theory. (A) Surface renewal (B) Film (C) Penetration (D) None of these

Last Answer : (B) Film

Pick out the wrong statement. (A) In a first order reaction, A → products; the reaction becomes slower as it proceeds, because the concentration of A decreases and the rate is proportional to the concentration of A (B) Transition state theory approaches the problem of calculating reaction rates by concentrating on the idea of activated complexes (C) According to the penetration theory, the mass transfer co-efficient decreases, if the exposure time of an eddy to the solute decreases (D) If the rate of an irreversible reaction, A + B → 2C is k.CA .CB , then the reaction is always elementary

Description : Pick out the wrong statement. (A) In a first order reaction, A → products; the reaction becomes slower as it proceeds, because the concentration of A decreases and the rate is proportional to the concentration ... irreversible reaction, A + B → 2C is k.CA .CB , then the reaction is always elementary

Last Answer : (C) According to the penetration theory, the mass transfer co-efficient decreases, if the exposure time of an eddy to the solute decreases

Danckwerts developed the __________ theory. (A) Penetration (B) Surface renewal (C) Film (D) None of these

Description : Danckwerts developed the __________ theory. (A) Penetration (B) Surface renewal (C) Film (D) None of these

Last Answer : (B) Surface renewal

Mass transfer co-efficient 'K' according to penetration theory varies with mass diffusivity as (A) D0.5 (B) D (C) 1/D (D) D1.5

Description : Mass transfer co-efficient 'K' according to penetration theory varies with mass diffusivity as (A) D0.5 (B) D (C) 1/D (D) D1.5

Last Answer : (A) D0.5

Pick out the wrong statement. (A) The Reynolds analogy for mass transfer is given by Lewis relation and is applicable, when Schmidt number is one (B) Sherwood number for flow in pipes can be expressed as the ratio of the concentration gradient at wall to the overall concentration difference (C) According to film theory for equimolar counter diffusion, the mass transfer coefficient is given by DAB(B)P - 3, Q - 2 (D) The z-component of the total mass flux of a component A in binary mixture of A and B is given by - Dab'.dCA/dz

Description : Pick out the wrong statement. (A) The Reynolds analogy for mass transfer is given by Lewis relation and is applicable, when Schmidt number is one (B) Sherwood number for flow in pipes can be expressed ... flux of a component A in binary mixture of A and B is given by - Dab'.dCA/dz

Last Answer : (C) According to film theory for equimolar counter diffusion, the mass transfer coefficient is given by DAB(B)P - 3, Q - 2

Mass transfer co-efficient (K) and diffusivity (D) are related according to film theory as (A) K ∝ D (B) K ∝√D (C) K ∝ D1.5 (D) K ∝ D

Description : Mass transfer co-efficient (K) and diffusivity (D) are related according to film theory as (A) K ∝ D (B) K ∝√D (C) K ∝ D1.5 (D) K ∝ D

Last Answer : (A) K ∝ D

Penetration theory relates the average mass transfer co-efficient (K) with diffusivity (D) as (A) K ∝D (B) K ∝√D (C) K ∝D1.5 (D) K ∝D

Description : Penetration theory relates the average mass transfer co-efficient (K) with diffusivity (D) as (A) K ∝D (B) K ∝√D (C) K ∝D1.5 (D) K ∝D

Last Answer : (B) K ∝√D

According to the film theory of mass transfer, the mass transfer co￾efficient is proportional to (where, D = molecular diffusivity). (A) D (B) D2 (C) D0.5 (D) 1/D

Description : According to the film theory of mass transfer, the mass transfer co￾efficient is proportional to (where, D = molecular diffusivity). (A) D (B) D2 (C) D0.5 (D) 1/D

Last Answer : (A) D

The Reynolds number of the liquid was increased 100 fold for a laminar falling film used for gas-liquid contacting. Assuming penetrating theory is applicable, the fold increase in the mass transfer co-efficient (Kc ) for the same system is(A) 100(B) 10(C) 5(D) 1.

Description : The Reynolds number of the liquid was increased 100 fold for a laminar falling film used for gas-liquid contacting. Assuming penetrating theory is applicable, the fold increase in the mass transfer co-efficient (Kc ) for the same system is. (A) 100 (B) 10 (C) 5 (D) 1

Last Answer : (B) 10

The equation, NA = (DAB . Pt /RTZ . PBM) (PA1 - PA2 ) is for (A) Fick's second law of diffusion (B) Steady state diffusion for stagnant case (C) Liquid M.T.C. by Higbie penetration theory (D) None of these

Description : The equation, NA = (DAB . Pt /RTZ . PBM) (PA1 - PA2 ) is for (A) Fick's second law of diffusion (B) Steady state diffusion for stagnant case (C) Liquid M.T.C. by Higbie penetration theory (D) None of these

Last Answer : (B) Steady state diffusion for stagnant case

Even though heat transfer co-efficient in boiling liquids is large, use of fins is advantageous, when the entire surface is exposed to __________ boiling. (A) Film (B) Nucleate (C) Transition (D) All modes of

Description : Even though heat transfer co-efficient in boiling liquids is large, use of fins is advantageous, when the entire surface is exposed to __________ boiling. (A) Film (B) Nucleate (C) Transition (D) All modes of

Last Answer : Option A

The mass transfer co-efficient for a solid sphere of radius 'a' dissolving in a large volume of quiescent liquid, in which ‘D’ is the diffusivity of solute, is (A) D/a (B) D/2a (C) Proportional to √D (D) Dependent on the Reynolds number

Description : The mass transfer co-efficient for a solid sphere of radius 'a' dissolving in a large volume of quiescent liquid, in which ‘D’ is the diffusivity of solute, is (A) D/a (B) D/2a (C) Proportional to √D (D) Dependent on the Reynolds number

Last Answer : (D) Dependent on the Reynolds number

The overall mass transfer co-efficient for the absorption of SO2 in air with dilute NaOH solution can be increased substantially by (A) Increasing the gas film co-efficient(B) Increasing the liquid film co-efficient(C) Increasing the total pressure(D) Decreasing the total pressure

Description : The overall mass transfer co-efficient for the absorption of SO2 in air with dilute NaOH solution can be increased substantially by (A) Increasing the gas film co-efficient (B) Increasing the liquid film co-efficient (C) Increasing the total pressure (D) Decreasing the total pressure

Last Answer : (A) Increasing the gas film co-efficient

Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger, the shell pressure drop is maximum for orifice baffles (C) S.I. unit of fouling factor is Watt/m2 .°K (D) Longitudinal fins are used in extended surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Description : Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger ... surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Last Answer : (C) S.I. unit of fouling factor is Watt/m2 .°K

The film penetration model of mass transfer was enunciated by (A) Gilliland (B) Toor and Marcello (C) Stefan (D) Fick

Description : The film penetration model of mass transfer was enunciated by (A) Gilliland (B) Toor and Marcello (C) Stefan (D) Fick

Last Answer : (B) Toor and Marcello

Surface renewal model of mass transfer was enunciated by (A) Toor and Marcello (B) Fick (C) Danckwerts (D) Stefan

Description : Surface renewal model of mass transfer was enunciated by (A) Toor and Marcello (B) Fick (C) Danckwerts (D) Stefan

Last Answer : (C) Danckwerts

Controlling heat transfer film co-efficient is the one, which offers __________ resistance to heat transfer. (A) No (B) The least (C) The largest (D) Lower

Description : Controlling heat transfer film co-efficient is the one, which offers __________ resistance to heat transfer. (A) No (B) The least (C) The largest (D) Lower

Last Answer : (C) The largest

The heat transfer co-efficient in film type condensation is __________ that for dropwise condensation. (A) Greater than (B) Lower than (C) Is same as (D) Half

Description : The heat transfer co-efficient in film type condensation is __________ that for dropwise condensation. (A) Greater than (B) Lower than (C) Is same as (D) Half

Last Answer : (B) Lower than

For an ideal gas, the activity co-efficient is (A) Directly proportional to pressure (B) Inversely proportional to pressure (C) Unity at all pressures (D) None of these

Description : For an ideal gas, the activity co-efficient is (A) Directly proportional to pressure (B) Inversely proportional to pressure (C) Unity at all pressures (D) None of these

Last Answer : (C) Unity at all pressures

Penetration model (theory) for mass transfer was enunciated by (A) Danckwerts (B) Toor and Marcello (C) Higbie (D) Kissinevskii

Description : Penetration model (theory) for mass transfer was enunciated by (A) Danckwerts (B) Toor and Marcello (C) Higbie (D) Kissinevskii

Last Answer : (C) Higbie

Incorrect statement for co-efficient of friction could be that A. The coefficient of friction is denoted by the Greek letter µ. B. The coefficient of friction is directly proportional to the force of friction C. The coefficient of friction is constant even in the conditions of fast slipping and high contact pressure D. The coefficient of friction is inversely proportional to the force pressing the surfaces together

Description : Incorrect statement for co-efficient of friction could be that A. The coefficient of friction is denoted by the Greek letter µ. B. The coefficient of friction is directly proportional to ... D. The coefficient of friction is inversely proportional to the force pressing the surfaces together

Last Answer : The coefficient of friction is constant even in the conditions of fast slipping and high contact pressure

Experimental determination of __________ is done by wetted wall column method. (A) Diffusion co-efficient (B) Mass transfer co-efficient (C) NTU (D) None of these

Description : Experimental determination of __________ is done by wetted wall column method. (A) Diffusion co-efficient (B) Mass transfer co-efficient (C) NTU (D) None of these

Last Answer : (B) Mass transfer co-efficient

Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of catalyst, if it doesnot entail a chain mechanism.(A) Proportional to(B) Independent of(C) Inversely proportional to(D) Proportional to the square o

Description : Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of ... to (B) Independent of (C) Inversely proportional to (D) Proportional to the square o

Last Answer : (A) Proportional to

Nusselt number/Biot number varies (A) Inversely with thermal conductivity (B) Directly with heat transfer co-efficient (C) Directly with thermal conductivity (D) Inversely with the dimension of the solid

Description : Nusselt number/Biot number varies (A) Inversely with thermal conductivity (B) Directly with heat transfer co-efficient (C) Directly with thermal conductivity (D) Inversely with the dimension of the solid

Last Answer : (A) Inversely with thermal conductivity

Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation (B) Film co-efficient for vaporisation decreases as a result of vapor binding (C) In industrial practice, sub-cooling of condensate is required, when thecondensate is a volatile liquid and is to be transferred for storage(D) Overall heat transfer co-efficient in a heat exchanger is controlled by thevalue of the film co-efficient, which is higher

Description : Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation ( ... in a heat exchanger is controlled by the value of the film co-efficient, which is higher

Last Answer : (D) Overall heat transfer co-efficient in a heat exchanger is controlled by the value of the film co-efficient, which is higher

If h1 = inner film co-efficient and /h2 = outer film co-efficient, then the overall heat transfer co-efficient is (A) Always less than h1 (B) Always between h1 and h2 (C) Always higher than h2 (D) Dependent on metal resistance

Description : If h1 = inner film co-efficient and /h2 = outer film co-efficient, then the overall heat transfer co-efficient is (A) Always less than h1 (B) Always between h1 and h2 (C) Always higher than h2 (D) Dependent on metal resistance

Last Answer : (B) Always between h1 and h2

Newton's law of viscosity, which states that the shear stress is proportional to the __________ Co-efficient of viscosity is called dynamic or absolute viscosity(where, V = velocity, Vg = velocity gradient). (A) V2 (B) 1/V2 (C) 1/Vg (D) Vg

Description : Newton's law of viscosity, which states that the shear stress is proportional to the __________ Co-efficient of viscosity is called dynamic or absolute viscosity(where, V = velocity, Vg = velocity gradient). (A) V2 (B) 1/V2 (C) 1/Vg (D) Vg

Last Answer : Option D

. The inner wall of a furnace is at a temperature of 700°C. The composite wall is made of two substances, 10 and 20 cm thick with thermal conductivities of 0.05 and 0.1 W.m-1.°C-1 respectively. The ambient air is at 30°C and the heat transfer co-efficient between the outer surface of wall and air is 20 W.m-2 .°C-1 . The rate of heat loss from the outer surface in W.m-2 is (A) 165.4 (B) 167.5 (C) 172.5 (D) 175

Description : . The inner wall of a furnace is at a temperature of 700°C. The composite wall is made of two substances, 10 and 20 cm thick with thermal conductivities of 0.05 and 0.1 W.m-1.°C-1 respectively. The ambient air is at 30°C ... from the outer surface in W.m-2 is (A) 165.4 (B) 167.5 (C) 172.5 (D) 175

Last Answer : (A) 165.4

The inside heat transfer co-efficient in case of turbulent flow of liquid in the tube side in a 1-2 shell and tube heat exchanger is increased by __________ times, when the number of tube passes is increased to 8. (A) 2 0.8 (B) 4 0.8 (C) 4 0.4 (D) 2 0.4

Description : The inside heat transfer co-efficient in case of turbulent flow of liquid in the tube side in a 1-2 shell and tube heat exchanger is increased by __________ times, when the number of tube passes is increased to 8. (A) 2 0.8 (B) 4 0.8 (C) 4 0.4 (D) 2 0.4

Last Answer : (B) 4 0.8

According to Newton's law of universal gravitation, any two particles of finite mass attract one another with a force which is A. Inversely proportional to the product of their masses and directly proportional to the square of their distance apart B. Inversely proportional to the product of their masses and directly proportional to their distance apart C. Directly proportional to the product of their masses and inversely proportional to their distance apart D. Directly proportional to the product of their masses and inversely proportional to the square of their distance apart

Description : According to Newton's law of universal gravitation, any two particles of finite mass attract one another with a force which is A. Inversely proportional to the product of their masses and ... the product of their masses and inversely proportional to the square of their distance apart

Last Answer : Directly proportional to the product of their masses and inversely proportional to the square of their distance apart

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. (du/dy) n the value of 'n' for pseudoplastic and Dilatant fluid are < 1 and >1 respectively (C) Shear stress for Newtonian fluid is proportional to the rate of shear in the direction perpendicular to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Description : Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. ... to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Last Answer : (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

If air (a non-condensing gas) is present in a condensing vapor stream, it will __________ the condensation rate of vapor. (A) Increase (B) Decrease (C) Not affect (D) Increase the condensing film co-efficient as well as

Description : If air (a non-condensing gas) is present in a condensing vapor stream, it will __________ the condensation rate of vapor. (A) Increase (B) Decrease (C) Not affect (D) Increase the condensing film co-efficient as well as

Last Answer : (B) Decrease

In case of a vertical tube evaporator, with increase in the liquor level, the __________ is increased. (A) Velocity of circulation (B) Liquor-film co-efficient (C) Both (A) and (B) (D) Neither (A) and (B)

Description : In case of a vertical tube evaporator, with increase in the liquor level, the __________ is increased. (A) Velocity of circulation (B) Liquor-film co-efficient (C) Both (A) and (B) (D) Neither (A) and (B)

Last Answer : (D) Neither (A) and (B)

In the Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass is __________ the fluid viscosity. (A) Directly proportional to (B) Inversely proportional to (C) Inversely proportional to the square root of (D) Independent of

Description : In the Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass is __________ the fluid viscosity. (A) Directly proportional to (B) Inversely proportional to (C) Inversely proportional to the square root of (D) Independent of

Last Answer : (B) Inversely proportional to

The wetted wall tower is used to determine (A) Individual mass transfer co-efficient (M.T.C.) in gaseous system (B) M.T.C. of individual components in a liquid-liquid system (C) M.T.C. of liquid in liquid-gas system (D) The overall M.T.C. of the system

Description : The wetted wall tower is used to determine (A) Individual mass transfer co-efficient (M.T.C.) in gaseous system (B) M.T.C. of individual components in a liquid-liquid system (C) M.T.C. of liquid in liquid-gas system (D) The overall M.T.C. of the system

Last Answer : (A) Individual mass transfer co-efficient (M.T.C.) in gaseous system

For absorbing a sparingly soluble gas in a liquid (A) Gas side mass transfer co-efficient should be increased (B) Liquid side mass transfer co-efficient should be increased (C) Liquid side mass transfer co-efficient should be decreased (D) Mass transfer co-efficient must be kept constant

Description : For absorbing a sparingly soluble gas in a liquid (A) Gas side mass transfer co-efficient should be increased (B) Liquid side mass transfer co-efficient should be increased (C) Liquid side mass transfer co-efficient should be decreased (D) Mass transfer co-efficient must be kept constant

Last Answer : (B) Liquid side mass transfer co-efficient should be increased

Mass transfer co-efficient of liquid is (A) Affected more by temperature than that for gases (B) Affected much less by temperature than that for gases

Description : Mass transfer co-efficient of liquid is (A) Affected more by temperature than that for gases (B) Affected much less by temperature than that for gases

Last Answer : (A) Affected more by temperature than that for gases

Wetted wall tower experiment determines the (A) Molal diffusivity (B) Volumetric co-efficient (C) Mass transfer co-efficient (D) None of these

Description : Wetted wall tower experiment determines the (A) Molal diffusivity (B) Volumetric co-efficient (C) Mass transfer co-efficient (D) None of these

Last Answer : (C) Mass transfer co-efficient

Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Description : Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Last Answer : (A) Mass transfer co-efficient

Which of the following is not a unit of mass transfer co-efficient? (A) Moles transferred/ [(time) (area) (mole fraction)] (B) Moles transferred/ [(time) (area) (mass A/mass B)] (C) Moles transferred/ [(time) (area) (pressure)] (D) None of these

Description : Which of the following is not a unit of mass transfer co-efficient? (A) Moles transferred/ [(time) (area) (mole fraction)] (B) Moles transferred/ [(time) (area) (mass A/mass B)] (C) Moles transferred/ [(time) (area) (pressure)] (D) None of these

Last Answer : (D) None of these

For experimental determination of mass transfer co-efficient by wetted wall tower, the mass transfer area is (A) Calculated (B) Unknown (C) Known (D) Not required

Description : For experimental determination of mass transfer co-efficient by wetted wall tower, the mass transfer area is (A) Calculated (B) Unknown (C) Known (D) Not required

Last Answer : (C) Known

Pick out the wrong statement. (A) Mass transfer co-efficient does not account for gas-liquid diffusion (B) Diffusion co-efficient and mass transfer co-efficient are not same in any mass transfer operation

Description : Pick out the wrong statement. (A) Mass transfer co-efficient does not account for gas-liquid diffusion (B) Diffusion co-efficient and mass transfer co-efficient are not same in any mass transfer operation

Last Answer : (A) Mass transfer co-efficient does not account for gas-liquid diffusion

In a vapor-liquid contacting equipment, the overall gas phase mass transfer co-efficient (M.T.C), KG is related to individual co-efficients (KG and KL ) as (A) KG = 1/KG + m/KL (B) 1/KG = 1/KG + m/KL (C) 1/KG = 1/KL + m/KG (D) KG = 1/KL + m/KG

Description : In a vapor-liquid contacting equipment, the overall gas phase mass transfer co-efficient (M.T.C), KG is related to individual co-efficients (KG and KL ) as (A) KG = 1/KG + m/KL (B) 1/KG = 1/KG + m/KL (C) 1/KG = 1/KL + m/KG (D) KG = 1/KL + m/KG

Last Answer : (B) 1/KG = 1/KG + m/KL

Mass transfer co-efficient is defined as (A) Flux = Co-efficient/concentration difference (B) Co-efficient = Flux/concentration difference (C) Flux=concentration difference/coefficient (D) None of these

Description : Mass transfer co-efficient is defined as (A) Flux = Co-efficient/concentration difference (B) Co-efficient = Flux/concentration difference (C) Flux=concentration difference/coefficient (D) None of these

Last Answer : (B) Co-efficient = Flux/concentration difference

According to Newton's law of viscosity, the shear stress on a layer of a fluid is __________ to the rate of shear strain. (A) Equal to (B) Directly proportional (C) Inversely proportional (D) None of these

Description : According to Newton's law of viscosity, the shear stress on a layer of a fluid is __________ to the rate of shear strain. (A) Equal to (B) Directly proportional (C) Inversely proportional (D) None of these

Last Answer : Answer: Option B

According to Avogadro’s law, the density of any two gases is __________ their molecular masses, if the gases are at the same temperature and pressure.  A. equal to  B. directly proportional to  C. inversely proportional to

Description : According to Avogadro’s law, the density of any two gases is __________ their molecular masses, if the gases are at the same temperature and pressure.  A. equal to  B. directly proportional to  C. inversely proportional to

Last Answer : Answer: B

Heat exchangers operating, when the asymptotic range is reached, (A) Provide very large heat transfer co-efficient (B) Results in making part of the heating surface inactive (C) Results in abruptly increased velocity (D) None of these

Description : Heat exchangers operating, when the asymptotic range is reached, (A) Provide very large heat transfer co-efficient (B) Results in making part of the heating surface inactive (C) Results in abruptly increased velocity (D) None of these

Last Answer : (B) Results in making part of the heating surface inactive