Psychrometry deals with the properties of gas-vapor mixture. Humidity can be determined by the measurement of the __________ of a fibre. (A) Electrical resistance (B) Thermal conductivity (C) Strength (D) None of these

Psychrometry deals with the properties of gas-vapor mixture. Humidity
can be determined by the measurement of the __________ of a fibre.
(A) Electrical resistance
(B) Thermal conductivity
(C) Strength
(D) None of these
by

1 Answer

Answer :

(A) Electrical resistance
by

Related questions

At a fixed pressure, the humidity depends upon the partial pressure of vapor in the mixture. Humidity of a vapour free gas is __________ percent. (A) 100 (B) 0 (C) 50 (D) Between 0 and 100

Description : At a fixed pressure, the humidity depends upon the partial pressure of vapor in the mixture. Humidity of a vapour free gas is __________ percent. (A) 100 (B) 0 (C) 50 (D) Between 0 and 100

Last Answer : (B) 0

The heat content of air is called the _____ of the air. a. Temperature b. Humidity c. Enthalpy d. Psychrometry e. Entropy

Description : The heat content of air is called the _____ of the air. a. Temperature b. Humidity c. Enthalpy d. Psychrometry e. Entropy

Last Answer : ANSWER : C

Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity

Description : Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity

Last Answer : (C) Tensile strength

The type of liquor circulation system to be ' employed in evaporators (viz. natural or forced circulation) is determined mainly by the __________ of the liquid. (A) Viscosity (B) Density (C) Thermal conductivity (D) Corrosive nature

Description : The type of liquor circulation system to be ' employed in evaporators (viz. natural or forced circulation) is determined mainly by the __________ of the liquid. (A) Viscosity (B) Density (C) Thermal conductivity (D) Corrosive nature

Last Answer : (A) Viscosity

Which of the following properties is not necessarily desirable in the material for transformer core? A. Mechanical strength B. Low hysteresis loss C. High thermal conductivity D. High permeability

Description : Which of the following properties is not necessarily desirable in the material for transformer core? A. Mechanical strength B. Low hysteresis loss C. High thermal conductivity D. High permeability

Last Answer : C) high thermal conductivity

Which of the following physical properties is TRUE of most dense ceramic materials? w) high tensile strength x) good ductility y) high compressive strength z) high electrical conductivity

Description : Which of the following physical properties is TRUE of most dense ceramic materials? w) high tensile strength x) good ductility y) high compressive strength z) high electrical conductivity

Last Answer : ANSWER: Y -- HIGH COMPRESSIVE STRENGTH

With increase in absolute humidity, the dew point of an unsaturated mixture of air and water vapor (at constant pressure and temperature). (A) Increases (B) Remains unchanged (C) Decreases (D) Decreases linearly

Description : With increase in absolute humidity, the dew point of an unsaturated mixture of air and water vapor (at constant pressure and temperature). (A) Increases (B) Remains unchanged (C) Decreases (D) Decreases linearly

Last Answer : (A) Increases

Dew point of an air-water vapor mixture (A) Decreases with decrease in pressure (B) At constant humidity & total pressure is fixed (C) Corresponding to any point on the humidity chart is obtained by projecting a line through this point parallel to the temperature axis and to the saturation curve (D) All 'a', 'b' & 'c'

Description : Dew point of an air-water vapor mixture (A) Decreases with decrease in pressure (B) At constant humidity & total pressure is fixed (C) Corresponding to any point on the humidity chart is obtained by projecting a ... to the temperature axis and to the saturation curve (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Description : Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Last Answer : (A) Fire clay

Velocity of liquid hydrocarbon fuels in a pipeline cannot be measured by magnetic flow-meters, because their __________ is very low/small. (A) Thermal conductivity (B) Electrical conductivity (C) Specific gravity

Description : Velocity of liquid hydrocarbon fuels in a pipeline cannot be measured by magnetic flow-meters, because their __________ is very low/small. (A) Thermal conductivity (B) Electrical conductivity (C) Specific gravity

Last Answer : (C) Specific gravity

During electrical desalting of crude oil, the electrical conductivity of a mixture of crude oil and water (which ranges between 3 to 8% water) __________ with increase in the amount of water. (A) Decreases (B) Increases (C) Remains unchanged (D) Decreases linearly

Description : During electrical desalting of crude oil, the electrical conductivity of a mixture of crude oil and water (which ranges between 3 to 8% water) __________ with increase in the amount of water. (A) Decreases (B) Increases (C) Remains unchanged (D) Decreases linearly

Last Answer : (B) Increases

Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths

Description : Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths

Last Answer : (B) Sharp melting points

The best guide to judge the general quality of water is the measurement of its (A) pH value (B) Electrical conductivity (C) Turbidity (D) Dissolved oxygen content

Description : The best guide to judge the general quality of water is the measurement of its (A) pH value (B) Electrical conductivity (C) Turbidity (D) Dissolved oxygen content

Last Answer : (B) Electrical conductivity

For organic compounds, group contribution method can be used for the estimation of (A) Critical properties (B) Specific gravity (C) Specific volume (D) Thermal conductivity

Description : For organic compounds, group contribution method can be used for the estimation of (A) Critical properties (B) Specific gravity (C) Specific volume (D) Thermal conductivity

Last Answer : (A) Critical properties

During dehumidification of unsaturated air wet bulb temperature & partial pressure of vapor are not constant. However, during evaporative cooling process with recirculated water supply, the __________ remains constant. (A) Wet bulb temperature (B) Partial pressure of water vapor (C) Relative humidity (D) None of these

Description : During dehumidification of unsaturated air wet bulb temperature & partial pressure of vapor are not constant. However, during evaporative cooling process with recirculated water supply, the __________ remains ... pressure of water vapor (C) Relative humidity (D) None of these

Last Answer : (A) Wet bulb temperature

__________ is the temperature at which a gas-vapor mixture becomes saturated, when cooled at constant total pressure out of contact with a liquid. (A) Dew point (B) Bubble point (C) Dry bulb temperature (D) Wet bulb temperature

Description : __________ is the temperature at which a gas-vapor mixture becomes saturated, when cooled at constant total pressure out of contact with a liquid. (A) Dew point (B) Bubble point (C) Dry bulb temperature (D) Wet bulb temperature

Last Answer : (A) Dew point

In case of an unsaturated mixture of gas and vapor, the percentage saturation is __________ its relative saturation. (A) Lower than (B) Higher than (C) Equal to (D) Either (A) or (B), depends on the mixture composition

Description : In case of an unsaturated mixture of gas and vapor, the percentage saturation is __________ its relative saturation. (A) Lower than (B) Higher than (C) Equal to (D) Either (A) or (B), depends on the mixture composition

Last Answer : (A) Lower than

The dew point of an unsaturated gas-vapor mixture does not depend upon the __________ of the mixture. (A) Composition (B) Temperature (C) Total pressure (D) All (A), (B) and (C)

Description : The dew point of an unsaturated gas-vapor mixture does not depend upon the __________ of the mixture. (A) Composition (B) Temperature (C) Total pressure (D) All (A), (B) and (C)

Last Answer : (B) Temperature

Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Description : Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Last Answer : (B) Increases

The ratio of thermal & electrical conductivity is same for all the metals at the same temperature; and at around room temperature, this ratio is proportional to(where, T = absolute temperature, °K) (A) T (B) 1/T (C) T2 (D) 1/T2

Description : The ratio of thermal & electrical conductivity is same for all the metals at the same temperature; and at around room temperature, this ratio is proportional to(where, T = absolute temperature, °K) (A) T (B) 1/T (C) T2 (D) 1/T2

Last Answer : A) T

Dielectric (A) Is an electrical insulating material (B) Of low resistivity is preferred (C) Should have high thermal conductivity (D) Need not defy the corrosive action of chemicals

Description : Dielectric (A) Is an electrical insulating material (B) Of low resistivity is preferred (C) Should have high thermal conductivity (D) Need not defy the corrosive action of chemicals

Last Answer : (A) Is an electrical insulating material

If the specific heats of a gas and a vapor are 0.2KJ/Kg.°K and 1.5 KJ/Kg.°K respectively, and the humidity is 0.01; the humid heat in KJ/°Kg. is (A) 0.31 (B) 0.107 (C) 0.017 (D) 0.215

Description : If the specific heats of a gas and a vapor are 0.2KJ/Kg.°K and 1.5 KJ/Kg.°K respectively, and the humidity is 0.01; the humid heat in KJ/°Kg. is (A) 0.31 (B) 0.107 (C) 0.017 (D) 0.215

Last Answer : (D) 0.215

gas which is collected over water becomes moistened due to water vapor, exerts its own partial pressure at the gas temperature, which is termed as its (A) Aqueous tension (B) Saturated humidity (C) Vapor pressure

Description : gas which is collected over water becomes moistened due to water vapor, exerts its own partial pressure at the gas temperature, which is termed as its (A) Aqueous tension (B) Saturated humidity (C) Vapor pressure

Last Answer : Option A

The temperature to which a vapour gas mixture must be cooled (at varying humidity) to become saturated is called the __________ temperature. (A) Dew point (B) Wet bulb (C) Dry bulb (D) None of these

Description : The temperature to which a vapour gas mixture must be cooled (at varying humidity) to become saturated is called the __________ temperature. (A) Dew point (B) Wet bulb (C) Dry bulb (D) None of these

Last Answer : (D) None of these

Describe application of pH measurement inindustry. How pH affect the electrical conductivity.

Description : Describe application of pH measurement inindustry. How pH affect the electrical conductivity.

Last Answer : Application of pH measurement in Industry:  pH measurement is essential in : 1) Waste water treatment, municipal sewage treatments. 2) Boiler feed water treatment. 3) Drinking ... ions for an acidic solution, Thus solutions having lower pH values are having higher conductivity values.

Describe application of pH measurement in industry. How pH affect the electrical conductivity

Description : Describe application of pH measurement in industry. How pH affect the electrical conductivity

Last Answer : Application of pH measurement in Industry: pH measurement is essential in : 1) Waste water treatment, municipal sewage treatments. 2) Boiler feed water treatment. 3) Drinking water ... ions for an acidic solution, Thus solutions having lower pH values are having higher conductivity values.

Refractory metals are known for which of the following properties: w) lack of chemical reactivity x) low density y) high melting point z) high thermal conductivity

Description : Refractory metals are known for which of the following properties: w) lack of chemical reactivity x) low density y) high melting point z) high thermal conductivity

Last Answer : ANSWER: Y -- HIGH MELTING POINT

Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Description : Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Last Answer : (C) High corrosion resistance

Tin base and lead base alloys are used for bearing materials. Tin compared to lead has lower (A) Price (B) Corrosion resistance (C) Thermal conductivity (D) Abundant availability

Description : Tin base and lead base alloys are used for bearing materials. Tin compared to lead has lower (A) Price (B) Corrosion resistance (C) Thermal conductivity (D) Abundant availability

Last Answer : (D) Abundant availability

Pick out the wrong statement. (A) Reciprocal of the resistance to heat flow is called thermal conductance (B) Unit of thermal conductance is W/°K (C) Thermal conductance of a wall of thickness 'L', thermal conductivity 'k' and heat flow area 'A' is kL/A (D) None of these

Description : Pick out the wrong statement. (A) Reciprocal of the resistance to heat flow is called thermal conductance (B) Unit of thermal conductance is W/°K (C) Thermal conductance of a wall of thickness 'L', thermal conductivity 'k' and heat flow area 'A' is kL/A (D) None of these

Last Answer : (C) Thermal conductance of a wall of thickness 'L', thermal conductivity 'k' and heat flow area 'A' is kL/A

reduction in thermal resistance during heat transfer does not occur in the (A) Convection heat transfer by stirring the fluid and cleaning the heating surface (B) Conduction heat transfer by reduction in the material thickness and increase in the thermal conductivity (C) Radiation heat transfer by increasing the temperature and reducing the emissivity (D) None of these

Description : reduction in thermal resistance during heat transfer does not occur in the (A) Convection heat transfer by stirring the fluid and cleaning the heating surface (B) Conduction heat transfer by ... Radiation heat transfer by increasing the temperature and reducing the emissivity (D) None of these

Last Answer : Option C

(3) reflection of light due to the presence of free electrons Explanation: Lustre (or luster) is the way light interacts with the surface of a crystal, rock, or mineral. The word traces its origins back to the latin lux, meaning "light", and generally implies radiance, gloss, or brilliance. Metals in general have high electrical conductivity, high thermal conductivity, and high density. Typically they are malleable and ductile, deforming -under stress without cleaving.

Description : (3) reflection of light due to the presence of free electrons Explanation: Lustre (or luster) is the way light interacts with the surface of a crystal, rock, or mineral. The word ... conductivity, and high density. Typically they are malleable and ductile, deforming -under stress without cleaving.

Last Answer : Cloud is a colloidal dispersion of – (1) Air in a dispersion medium of water (2) Fog in a dispersion medium of water (3) Mist in a dispersion medium of air (4) Water drops in a dispersion medium of air

Which of the following criterion is used for any metal to be used as a cooking material? (1) More specific heat (2) More thermal conductivity (3) Less thermal conductivity (4) Less electrical conductivity

Description : Which of the following criterion is used for any metal to be used as a cooking material? (1) More specific heat (2) More thermal conductivity (3) Less thermal conductivity (4) Less electrical conductivity

Last Answer : (3) Less thermal conductivity Explanation: A metal to be used as a cooking material should have less thermal conductivity.

An approximate estimation of total dissolved solids of a given water sample is often made by measuring (a) Electrical conductivity of the water sample (b) Electro-magnetic conductivity of the water sample (c) Sound conductivity of the water sample (d) Thermal conductivity of the water sample

Description : An approximate estimation of total dissolved solids of a given water sample is often made by measuring (a) Electrical conductivity of the water sample (b) Electro-magnetic conductivity of the water sample (c) Sound conductivity of the water sample (d) Thermal conductivity of the water sample

Last Answer : (a) Electrical conductivity of the water sample

Which of the following criterion is used for any metal to be used as a cooking material ? (1) More specific heat (2) More thermal conductivity (3) Less thermal conductivity (4) Less electrical conductivity

Description : Which of the following criterion is used for any metal to be used as a cooking material ? (1) More specific heat (2) More thermal conductivity (3) Less thermal conductivity (4) Less electrical conductivity

Last Answer : Less thermal conductivity 

Which of the following is directly concerned with Psychrometry? (A) Lewis relationship (B) Galileo number (C) Weber number (D) Dean number

Description : Which of the following is directly concerned with Psychrometry? (A) Lewis relationship (B) Galileo number (C) Weber number (D) Dean number

Last Answer : (A) Lewis relationship

Dean number is concerned with the (A) Fluid-particle interaction (B) Fluid flow through helical pipes (C) Power consumption in agitated vessels (D) Psychrometry

Description : Dean number is concerned with the (A) Fluid-particle interaction (B) Fluid flow through helical pipes (C) Power consumption in agitated vessels (D) Psychrometry

Last Answer : (B) Fluid flow through helical pipes

Dryness factor of steam is defined as the ratio of the mass of vapor in the mixture to the mass of the mixture. Dryness factor of steam is measured by a __________ calorimeter. (A) Bomb (B) Throttling (C) Junker's (D) Boy's

Description : Dryness factor of steam is defined as the ratio of the mass of vapor in the mixture to the mass of the mixture. Dryness factor of steam is measured by a __________ calorimeter. (A) Bomb (B) Throttling (C) Junker's (D) Boy's

Last Answer : Option B

Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity(C) Surface tension(D) Density

Description : Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity (C) Surface tension (D) Density

Last Answer : (D) Density

Coke oven walls are lined with __________ bricks. (A) Silica (B) Tar-dolomite (C) Low thermal conductivity (D) Fire clay

Description : Coke oven walls are lined with __________ bricks. (A) Silica (B) Tar-dolomite (C) Low thermal conductivity (D) Fire clay

Last Answer : (A) Silica

If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ law. (A) Hyperbolic (B) Parabolic (C) Linear (D) Logarithmic

Description : If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ ... (A) Hyperbolic (B) Parabolic (C) Linear (D) Logarithmic

Last Answer : (C) Linear

__________ equation relates the thermal conductivity of a solid to its temperature. (A) Antoine (B) Kopp's (C) Lee's (D) Kistyakowsky

Description : __________ equation relates the thermal conductivity of a solid to its temperature. (A) Antoine (B) Kopp's (C) Lee's (D) Kistyakowsky

Last Answer : (C) Lee's

A wall has two layers of materials A and B; each made of a different material. Both the layers have the same thickness. The thermal conductivity of material A is twice that of B. Under the equilibrium, the temperature difference across the wall is 36°C. The temperature difference across the layer A is __________ °C. (A) 6 (B) 12 (C) 18 (D) 24

Description : A wall has two layers of materials A and B; each made of a different material. Both the layers have the same thickness. The thermal conductivity of material A is twice that of B. Under the equilibrium, the temperature ... difference across the layer A is __________ °C. (A) 6 (B) 12 (C) 18 (D) 24

Last Answer : (B) 12

Heat transfer rate described by Fourier's law will decrease, if the __________ increases. (A) Thermal conductivity (B) Thickness (C) Temperature difference (D) Heat transfer area

Description : Heat transfer rate described by Fourier's law will decrease, if the __________ increases. (A) Thermal conductivity (B) Thickness (C) Temperature difference (D) Heat transfer area

Last Answer : (B) Thickness

Boiling point of a solution according to Duhring's rule is a linear function of the __________ of water. (A) Boiling point (at the same pressure) (B) Viscosity (C) Density (D) Thermal conductivity

Description : Boiling point of a solution according to Duhring's rule is a linear function of the __________ of water. (A) Boiling point (at the same pressure) (B) Viscosity (C) Density (D) Thermal conductivity

Last Answer : (A) Boiling point (at the same pressure)

If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ law. (A) Parabolic (B) Hyperbolic (C) Linear (D) Logarithmic

Description : If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ law. (A) Parabolic (B) Hyperbolic (C) Linear (D) Logarithmic

Last Answer : (A) Parabolic

Three materials A, B and C of equal thickness and of thermal conductivity of 20, 40 & 60 kcal/hr. m. °C respectively are joined together. The temperature outside of A and C are 30°C and 100°C respectively. The interface between B and C will be at a temperature of __________ °C. (A) 40 (B) 95 (C) 70 (D) 50

Description : Three materials A, B and C of equal thickness and of thermal conductivity of 20, 40 & 60 kcal/hr. m. °C respectively are joined together. The temperature outside of A and C are 30°C and 100°C respectively. The interface ... C will be at a temperature of __________ °C. (A) 40 (B) 95 (C) 70 (D) 50

Last Answer : (C) 70

A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of thermal conductivity 0.14 W/m.K and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5

Description : A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of ... and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5

Last Answer : (B) 0.1