Boiling point of a solution according to Duhring's rule is a linear function of the __________ of water. (A) Boiling point (at the same pressure) (B) Viscosity (C) Density (D) Thermal conductivity

Boiling point of a solution according to Duhring's rule is a linear
function of the __________ of water.
(A) Boiling point (at the same pressure)
(B) Viscosity
(C) Density
(D) Thermal conductivity
by

1 Answer

Answer :

(A) Boiling point (at the same pressure)
by

Related questions

. Boiling point elevation for a strong and concentrated solution is found by Duhring's rule, which states that at the same pressure, the boiling point of a solution is a linear function of the __________ of pure water. (A) Boiling point (B) Dynamic viscosity (C) Kinematic viscosity (D) Density

Description : . Boiling point elevation for a strong and concentrated solution is found by Duhring's rule, which states that at the same pressure, the boiling point of a solution is a linear function of the __________ of pure water. (A) Boiling point (B) Dynamic viscosity (C) Kinematic viscosity (D) Density

Last Answer : (A) Boiling point

Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in the tubes of natural circulation evaporators is in the range of 0.3 to 0.9 metre/second (C) Duhring's plot is used for calculating the concentration of solution (D) In a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Description : Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in ... a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Last Answer : (C) Duhring's plot is used for calculating the concentration of solution

Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity(C) Surface tension(D) Density

Description : Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity (C) Surface tension (D) Density

Last Answer : (D) Density

The type of liquor circulation system to be ' employed in evaporators (viz. natural or forced circulation) is determined mainly by the __________ of the liquid. (A) Viscosity (B) Density (C) Thermal conductivity (D) Corrosive nature

Description : The type of liquor circulation system to be ' employed in evaporators (viz. natural or forced circulation) is determined mainly by the __________ of the liquid. (A) Viscosity (B) Density (C) Thermal conductivity (D) Corrosive nature

Last Answer : (A) Viscosity

Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than that of the damp material (C) Ratio of its capacity to economy equals the steam consumption in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Description : Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than ... in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Last Answer : (B) Thermal conductivity of a dry material is more than that of the damp material

Among liquids, water has a comparatively high value of thermal conductivity, due to its (A) Low density (B) High viscosity (C) Partial ionisation (D) Dense structure

Description : Among liquids, water has a comparatively high value of thermal conductivity, due to its (A) Low density (B) High viscosity (C) Partial ionisation (D) Dense structure

Last Answer : (C) Partial ionisation

Heat transfer occurs by natural convection because change in temperature causes difference in (A) Viscosity (B) Density (C) Thermal conductivity (D) Heat capacity

Description : Heat transfer occurs by natural convection because change in temperature causes difference in (A) Viscosity (B) Density (C) Thermal conductivity (D) Heat capacity

Last Answer : (B) Density

ick out the undesirable property for a good refrigerant. (A) High thermal conductivity (B) Low freezing point (C) Large latent heat of vaporisation (D) High viscosity

Description : ick out the undesirable property for a good refrigerant. (A) High thermal conductivity (B) Low freezing point (C) Large latent heat of vaporisation (D) High viscosity

Last Answer : (D) High viscosity

If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ law. (A) Hyperbolic (B) Parabolic (C) Linear (D) Logarithmic

Description : If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ ... (A) Hyperbolic (B) Parabolic (C) Linear (D) Logarithmic

Last Answer : (C) Linear

If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ law. (A) Parabolic (B) Hyperbolic (C) Linear (D) Logarithmic

Description : If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ law. (A) Parabolic (B) Hyperbolic (C) Linear (D) Logarithmic

Last Answer : (A) Parabolic

Duhring’s rule is important in solving problems on (A) Distillation (B) Crystallisation (C) Evaporation (D) Humidification

Description : Duhring’s rule is important in solving problems on (A) Distillation (B) Crystallisation (C) Evaporation (D) Humidification

Last Answer : (C) Evaporation

Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Description : Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Last Answer : (B) Increases

With increase in temperature, the rate of leaching increases, because the (A) Diffusivity of solute increases (B) Viscosity of solvent decreases (C) Thermal conductivity of solute increases (D) None of these

Description : With increase in temperature, the rate of leaching increases, because the (A) Diffusivity of solute increases (B) Viscosity of solvent decreases (C) Thermal conductivity of solute increases (D) None of these

Last Answer : (A) Diffusivity of solute increases

Dittus-Boelter equation cannot be used for molten metals mainly due to its very low (A) Prandtl number (B) Grashoff number (C) Thermal conductivity (D) Viscosity

Description : Dittus-Boelter equation cannot be used for molten metals mainly due to its very low (A) Prandtl number (B) Grashoff number (C) Thermal conductivity (D) Viscosity

Last Answer : (A) Prandtl number

The intensive properties are (A) Molar volume, density, viscosity and boiling point (B) Refractive index and surface tension (C) Both (A) and (B) (D) None of these

Description : The intensive properties are (A) Molar volume, density, viscosity and boiling point (B) Refractive index and surface tension (C) Both (A) and (B) (D) None of these

Last Answer : (C) Both (A) and (B)

1. __________ of air does not increase with increase in temperature. (A) Density (B) Thermal diffusivity (C) Viscosity (D) Thermal conductivi

Description : 1. __________ of air does not increase with increase in temperature. (A) Density (B) Thermal diffusivity (C) Viscosity (D) Thermal conductivi

Last Answer : Option A

Alcohol is more volatile than water because ______ is lower than water. (1) its boiling point (2) its density (3) its viscosity (4) its surface tension

Description : Alcohol is more volatile than water because ______ is lower than water. (1) its boiling point (2) its density (3) its viscosity (4) its surface tension

Last Answer : (1) its boiling point Explanation: Drinking alcohol (ethanol) and a lot of other simple alcohols are more volatile than water because they are less polar. Thus, alcohol has higher vapor pres-sure and ... C is what makes it possible to distill alcohol into a much stronger solution than wine or beer.

Alcohol is more volatile than water because _________ is lower than water. (1) its boiling point (2) its density (3) its viscosity (4) its surface tension

Description : Alcohol is more volatile than water because _________ is lower than water. (1) its boiling point (2) its density (3) its viscosity (4) its surface tension

Last Answer : its boiling point

Refractory metals are known for which of the following properties: w) lack of chemical reactivity x) low density y) high melting point z) high thermal conductivity

Description : Refractory metals are known for which of the following properties: w) lack of chemical reactivity x) low density y) high melting point z) high thermal conductivity

Last Answer : ANSWER: Y -- HIGH MELTING POINT

On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because – (1) metals have higher thermal capacity than plastics (2) plastics have a lower density than metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Description : On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because - (1) metals ... metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Last Answer : (3) metals are good conductors of heat Explanation: On a chilly day, the room temperature is lower than our body temperature. Since metals have a higher coefficient of thermal conductivity than plastic, they ... from our fingers will flow to the metal cap much more quickly than to the plastic body.

On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because : (1) metals have higher thermal capacity than plastics (2) plastics have a lower density than metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Description : On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because : (1) metals ... metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Last Answer : metals are good conductors of heat

Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity

Description : Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity

Last Answer : B) High thermal conductivity

The driving potential for the crystal growth during crystallisation is the __________ of the solution. (A) Concentration (B) Viscosity (C) Super-saturation (D) Density

Description : The driving potential for the crystal growth during crystallisation is the __________ of the solution. (A) Concentration (B) Viscosity (C) Super-saturation (D) Density

Last Answer : (C) Super-saturation

A wall has two layers of materials A and B; each made of a different material. Both the layers have the same thickness. The thermal conductivity of material A is twice that of B. Under the equilibrium, the temperature difference across the wall is 36°C. The temperature difference across the layer A is __________ °C. (A) 6 (B) 12 (C) 18 (D) 24

Description : A wall has two layers of materials A and B; each made of a different material. Both the layers have the same thickness. The thermal conductivity of material A is twice that of B. Under the equilibrium, the temperature ... difference across the layer A is __________ °C. (A) 6 (B) 12 (C) 18 (D) 24

Last Answer : (B) 12

A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of thermal conductivity 0.14 W/m.K and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5

Description : A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of ... and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5

Last Answer : (B) 0.1

On addition of solute in the solvent, the __________ of the solution decreases. (A) Boiling point (B) Freezing point (C) Vapour pressure (D) Both (B) and (C)

Description : On addition of solute in the solvent, the __________ of the solution decreases. (A) Boiling point (B) Freezing point (C) Vapour pressure (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

(3) reflection of light due to the presence of free electrons Explanation: Lustre (or luster) is the way light interacts with the surface of a crystal, rock, or mineral. The word traces its origins back to the latin lux, meaning "light", and generally implies radiance, gloss, or brilliance. Metals in general have high electrical conductivity, high thermal conductivity, and high density. Typically they are malleable and ductile, deforming -under stress without cleaving.

Description : (3) reflection of light due to the presence of free electrons Explanation: Lustre (or luster) is the way light interacts with the surface of a crystal, rock, or mineral. The word ... conductivity, and high density. Typically they are malleable and ductile, deforming -under stress without cleaving.

Last Answer : Cloud is a colloidal dispersion of – (1) Air in a dispersion medium of water (2) Fog in a dispersion medium of water (3) Mist in a dispersion medium of air (4) Water drops in a dispersion medium of air

Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a shell and tube heat exchanger (C) Steam jet ejector is used for vapor compression in a thermal recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Description : Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a ... recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Last Answer : (D) Heat sensitive materials should be concentrated in high pressure evaporators

The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has an elevation of boiling point (B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Description : The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has ... B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Last Answer : (A) Solution has an elevation of boiling point

Duhring's plot' is of use in (A) Extractive distillation (B) Evaporation

Description : Duhring's plot' is of use in (A) Extractive distillation (B) Evaporation

Last Answer : (B) Evaporation

Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Description : Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Last Answer : (A) Mass transfer co-efficient

Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Description : Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Last Answer : (A) Fire clay

Coke oven walls are lined with __________ bricks. (A) Silica (B) Tar-dolomite (C) Low thermal conductivity (D) Fire clay

Description : Coke oven walls are lined with __________ bricks. (A) Silica (B) Tar-dolomite (C) Low thermal conductivity (D) Fire clay

Last Answer : (A) Silica

Psychrometry deals with the properties of gas-vapor mixture. Humidity can be determined by the measurement of the __________ of a fibre. (A) Electrical resistance (B) Thermal conductivity (C) Strength (D) None of these

Description : Psychrometry deals with the properties of gas-vapor mixture. Humidity can be determined by the measurement of the __________ of a fibre. (A) Electrical resistance (B) Thermal conductivity (C) Strength (D) None of these

Last Answer : (A) Electrical resistance

__________ equation relates the thermal conductivity of a solid to its temperature. (A) Antoine (B) Kopp's (C) Lee's (D) Kistyakowsky

Description : __________ equation relates the thermal conductivity of a solid to its temperature. (A) Antoine (B) Kopp's (C) Lee's (D) Kistyakowsky

Last Answer : (C) Lee's

Heat transfer rate described by Fourier's law will decrease, if the __________ increases. (A) Thermal conductivity (B) Thickness (C) Temperature difference (D) Heat transfer area

Description : Heat transfer rate described by Fourier's law will decrease, if the __________ increases. (A) Thermal conductivity (B) Thickness (C) Temperature difference (D) Heat transfer area

Last Answer : (B) Thickness

Three materials A, B and C of equal thickness and of thermal conductivity of 20, 40 & 60 kcal/hr. m. °C respectively are joined together. The temperature outside of A and C are 30°C and 100°C respectively. The interface between B and C will be at a temperature of __________ °C. (A) 40 (B) 95 (C) 70 (D) 50

Description : Three materials A, B and C of equal thickness and of thermal conductivity of 20, 40 & 60 kcal/hr. m. °C respectively are joined together. The temperature outside of A and C are 30°C and 100°C respectively. The interface ... C will be at a temperature of __________ °C. (A) 40 (B) 95 (C) 70 (D) 50

Last Answer : (C) 70

Velocity of liquid hydrocarbon fuels in a pipeline cannot be measured by magnetic flow-meters, because their __________ is very low/small. (A) Thermal conductivity (B) Electrical conductivity (C) Specific gravity

Description : Velocity of liquid hydrocarbon fuels in a pipeline cannot be measured by magnetic flow-meters, because their __________ is very low/small. (A) Thermal conductivity (B) Electrical conductivity (C) Specific gravity

Last Answer : (C) Specific gravity

With increase in temperature, the thermal conductivity of most liquids (A) Increases (B) Decreases (C) Remain same (D) First increases upto a certain temperature and then becomes constant

Description : With increase in temperature, the thermal conductivity of most liquids (A) Increases (B) Decreases (C) Remain same (D) First increases upto a certain temperature and then becomes constant

Last Answer : (C) Remain same

With increase in temperature, the thermal conductivity of a gas (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of gas

Description : With increase in temperature, the thermal conductivity of a gas (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of gas

Last Answer : (A) Increases

Which of the following has maximum thermal conductivity at the same temperature? (A) Steel (B) Petrol (C) Air (D) All have the same conductivity

Description : Which of the following has maximum thermal conductivity at the same temperature? (A) Steel (B) Petrol (C) Air (D) All have the same conductivity

Last Answer : (A) Steel

The ratio of thermal & electrical conductivity is same for all the metals at the same temperature; and at around room temperature, this ratio is proportional to(where, T = absolute temperature, °K) (A) T (B) 1/T (C) T2 (D) 1/T2

Description : The ratio of thermal & electrical conductivity is same for all the metals at the same temperature; and at around room temperature, this ratio is proportional to(where, T = absolute temperature, °K) (A) T (B) 1/T (C) T2 (D) 1/T2

Last Answer : A) T

The ratio of kinematic viscosity to thermal diffusivity is called the __________ number. (A) Peclet (B) Prandtl (C) Stanton (D) Nusselt

Description : The ratio of kinematic viscosity to thermal diffusivity is called the __________ number. (A) Peclet (B) Prandtl (C) Stanton (D) Nusselt

Last Answer : (B) Prandtl

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

Boiling point elevation of a solution of NaOH (A) Increases rapidly with temperature rise (B) Is almost independent of temperature (C) Is almost independent of pressure (D) Both (B) and (C)

Description : Boiling point elevation of a solution of NaOH (A) Increases rapidly with temperature rise (B) Is almost independent of temperature (C) Is almost independent of pressure (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Boiling point elevation of an ideal solution (A) Increases rapidly with temperature rise (B) Decreases rapidly with temperature rise (C) In independent of pressure (D) Both (B) and (C)

Description : Boiling point elevation of an ideal solution (A) Increases rapidly with temperature rise (B) Decreases rapidly with temperature rise (C) In independent of pressure (D) Both (B) and (C)

Last Answer : (A) Increases rapidly with temperature rise

Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments (B) Pressure drop in the equipment will be very high (C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Description : Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the ... C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Last Answer : (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments

Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Description : Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Last Answer : (B) High vapour pressure

In cold countries ethylene glycol is added to water in car radiators. This helps to (a) Reduce the viscosity (b) Make water a better lubricant (c) Lower the freezing point (d) Lower the boiling poin

Description : In cold countries ethylene glycol is added to water in car radiators. This helps to (a) Reduce the viscosity (b) Make water a better lubricant (c) Lower the freezing point (d) Lower the boiling poin

Last Answer : Lower the freezing point

Which of the following items is not a path function  (a) heat  (b) work  (c) kinetic energy  (d) vdp  (e) thermal conductivity.

Description : Which of the following items is not a path function  (a) heat  (b) work  (c) kinetic energy  (d) vdp  (e) thermal conductivity.

Last Answer : Answer : e