The best guide to judge the general quality of water is the measurement of its (A) pH value (B) Electrical conductivity (C) Turbidity (D) Dissolved oxygen content

The best guide to judge the general quality of water is the measurement of its
(A) pH value
(B) Electrical conductivity
(C) Turbidity
(D) Dissolved oxygen content
by

1 Answer

Answer :

(B) Electrical conductivity
by

Related questions

Describe application of pH measurement inindustry. How pH affect the electrical conductivity.

Description : Describe application of pH measurement inindustry. How pH affect the electrical conductivity.

Last Answer : Application of pH measurement in Industry:  pH measurement is essential in : 1) Waste water treatment, municipal sewage treatments. 2) Boiler feed water treatment. 3) Drinking ... ions for an acidic solution, Thus solutions having lower pH values are having higher conductivity values.

Describe application of pH measurement in industry. How pH affect the electrical conductivity

Description : Describe application of pH measurement in industry. How pH affect the electrical conductivity

Last Answer : Application of pH measurement in Industry: pH measurement is essential in : 1) Waste water treatment, municipal sewage treatments. 2) Boiler feed water treatment. 3) Drinking water ... ions for an acidic solution, Thus solutions having lower pH values are having higher conductivity values.

Tri-sodium phosphate is used in boiler water treatment to reduce (A) Turbidity (B) Caustic embrittlement (C) Suspended silica (D) Dissolved oxygen

Description : Tri-sodium phosphate is used in boiler water treatment to reduce (A) Turbidity (B) Caustic embrittlement (C) Suspended silica (D) Dissolved oxygen

Last Answer : (B) Caustic embrittlement

Which of the following is the most detrimental for water used in high pressure boiler? (A) Silica (B) Turbidity (C) Phenol(D) Dissolved oxygen

Description : Which of the following is the most detrimental for water used in high pressure boiler? (A) Silica (B) Turbidity (C) Phenol (D) Dissolved oxygen

Last Answer : (A) Silica

Hydrazine is used in water treatment for the removal of (A) Colloidal impurities (B) Dissolved oxygen (C) Turbidity (D) Chlorinous taste

Description : Hydrazine is used in water treatment for the removal of (A) Colloidal impurities (B) Dissolved oxygen (C) Turbidity (D) Chlorinous taste

Last Answer : (B) Dissolved oxygen

The detrimental effect on organism and water quality with temperature rise of aquatic system is the reduction of __________ of water. (A) Dissolved oxygen content (B) Biological oxygen demand (C) Vapor pressure (D) All (A), (B) and (C)

Description : The detrimental effect on organism and water quality with temperature rise of aquatic system is the reduction of __________ of water. (A) Dissolved oxygen content (B) Biological oxygen demand (C) Vapor pressure (D) All (A), (B) and (C)

Last Answer : (A) Dissolved oxygen content

An approximate estimation of total dissolved solids of a given water sample is often made by measuring (a) Electrical conductivity of the water sample (b) Electro-magnetic conductivity of the water sample (c) Sound conductivity of the water sample (d) Thermal conductivity of the water sample

Description : An approximate estimation of total dissolved solids of a given water sample is often made by measuring (a) Electrical conductivity of the water sample (b) Electro-magnetic conductivity of the water sample (c) Sound conductivity of the water sample (d) Thermal conductivity of the water sample

Last Answer : (a) Electrical conductivity of the water sample

Turbidity of water is an indication of the presence of (A) Suspended inorganic matter (B) Dissolved solids (C) Floating solids (D) Dissolved gases

Description : Turbidity of water is an indication of the presence of (A) Suspended inorganic matter (B) Dissolved solids (C) Floating solids (D) Dissolved gases

Last Answer : (A) Suspended inorganic matter

The resistance of water to the passage of light through it is a measure of the (A) Turbidity (B) Color (C) Hardness (D) Dissolved gases

Description : The resistance of water to the passage of light through it is a measure of the (A) Turbidity (B) Color (C) Hardness (D) Dissolved gases

Last Answer : (A) Turbidity

The most detrimental impurity in high pressure boiler feed water is (A) Suspended salt (B) Dissolved salt (C) Silica (D) Turbidity

Description : The most detrimental impurity in high pressure boiler feed water is (A) Suspended salt (B) Dissolved salt (C) Silica (D) Turbidity

Last Answer : Option C

Psychrometry deals with the properties of gas-vapor mixture. Humidity can be determined by the measurement of the __________ of a fibre. (A) Electrical resistance (B) Thermal conductivity (C) Strength (D) None of these

Description : Psychrometry deals with the properties of gas-vapor mixture. Humidity can be determined by the measurement of the __________ of a fibre. (A) Electrical resistance (B) Thermal conductivity (C) Strength (D) None of these

Last Answer : (A) Electrical resistance

Turbidity of water is expressed (A) In ppm (B) In numbers in an arbitrary scale (C) By pH value (D) By colour code

Description : Turbidity of water is expressed  (A) In ppm  (B) In numbers in an arbitrary scale  (C) By pH value  (D) By colour code 

Last Answer : (A) In ppm

Recuperation test is carried out to determine (A) Turbidity of water (B) pH value of water (C) Yield of well (D) Discharge from a well

Description : Recuperation test is carried out to determine  (A) Turbidity of water  (B) pH value of water  (C) Yield of well  (D) Discharge from a well 

Last Answer : (A) Turbidity of water 

On nephelometry turbidity unit (NTU) is equal to the turbidity produced by (a) 1 mg SiO2 dissolved in 1 l of distilled water with the test being run according to absorption principle (b) 1 mg SiO2 dissolved in 1 l of distilled water with the test being run according t scattering principle (c) 1 mg Formazin dissolved in 1 l of distilled water with the test being run according to absorption principle (d) 1 mg Formazin dissolved in 1 l o f distilled water with the test being run according to scattering principle.

Description : On nephelometry turbidity unit (NTU) is equal to the turbidity produced by (a) 1 mg SiO2 dissolved in 1 l of distilled water with the test being run according to absorption principle (b) 1 ... Formazin dissolved in 1 l o f distilled water with the test being run according to scattering principle.

Last Answer : (d) 1 mg Formazin dissolved in 1 l o f distilled water with the test being run according to scattering principle.

. Presence of iron and manganese in water causes (A) Reduction in its dissolved oxygen content (B) Discoloration of bathroom fixtures (C) Temporary hardness (D) None of these

Description : . Presence of iron and manganese in water causes (A) Reduction in its dissolved oxygen content (B) Discoloration of bathroom fixtures (C) Temporary hardness (D) None of these

Last Answer : (B) Discoloration of bathroom fixtures

Deaeration of high pressure boiler feed water is done to reduce (A) Foaming from boilers (B) Its dissolved oxygen content (C) Its silica content (D) Caustic embrittlement

Description : Deaeration of high pressure boiler feed water is done to reduce (A) Foaming from boilers (B) Its dissolved oxygen content (C) Its silica content (D) Caustic embrittlement

Last Answer : (B) Its dissolved oxygen content

Dissolved oxygen content in river water is around __________ ppm. (A) 5 (B) 100 (C) 250 (D) 500

Description : Dissolved oxygen content in river water is around __________ ppm. (A) 5 (B) 100 (C) 250 (D) 500

Last Answer : (A) 5

Pick out the wrong statement. (A) Caustic embrittlement of boiler's metallic parts is caused by highconcentration of caustic soda in boiler feed water(B) Cooling and freezing of water kills the bacteria present in it(C) With increasing boiler operating pressure of steam, the maximumallowable concentration of silica in feed water goes on decreasing(D) Dissolved oxygen content in high pressure boiler feed water should benil

Description : Pick out the wrong statement. (A) Caustic embrittlement of boiler's metallic parts is caused by highconcentration of caustic soda in boiler feed water (B) Cooling and freezing of water kills the ... goes on decreasing (D) Dissolved oxygen content in high pressure boiler feed water should be nil

Last Answer : (B) Cooling and freezing of water kills the bacteria present in it

For existence of aquatic life in water, the dissolved oxygen content in it, should not be less than __________ ppm. (A) 10000 (B) 5 (C) 500 (D) 1000

Description : For existence of aquatic life in water, the dissolved oxygen content in it, should not be less than __________ ppm. (A) 10000 (B) 5 (C) 500 (D) 1000

Last Answer : (B) 5

Presence of carbonaceous matter in the sewage (A) Causes reduction in its dissolved oxygen content thereby endangering the life of aquatic creatures (B) Reduces sulphate ions to sulphides causing obnoxious smell (C) Increases the quantity of chlorine used for its purification (D) All (A), (B) and (C)

Description : Presence of carbonaceous matter in the sewage (A) Causes reduction in its dissolved oxygen content thereby endangering the life of aquatic creatures (B) Reduces sulphate ions to sulphides causing obnoxious ... quantity of chlorine used for its purification (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The conductivity of crude oil-water mixture depends on the (A) pH value (B) Water percentage (C) Temperature (D) All (A), (B) and (C

Description : The conductivity of crude oil-water mixture depends on the (A) pH value (B) Water percentage (C) Temperature (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Consider the following statements. The following factors relate to the process of coagulation : 1. Percentage removal is higher when turbidity is more 2. Additional of activated silica aids in the process of coagulation 3. pH of water is an important consideration for selecting a coagulant Which of the following statements are correct ? a) 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Description : Consider the following statements. The following factors relate to the process of coagulation : 1. Percentage removal is higher when turbidity is more 2. Additional of activated silica aids in the process of coagulation 3. pH of water ... 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Last Answer : a) 1, 2 and 3

Dilution method of disposing of sewage, is not preferred to A. When sewage is fresh B. When diluting water has high dissolved oxygen content C. When diluting water is used for water supply near the point of sewage disposed D. When the diluting water is having flow currents

Description : Dilution method of disposing of sewage, is not preferred to A. When sewage is fresh B. When diluting water has high dissolved oxygen content C. When diluting water is used for water supply near the point of sewage disposed D. When the diluting water is having flow currents

Last Answer : ANS: C

Chlorination of water does not remove (A) Ammonia content (B) B.O.D. (C) Organic matter content (D) Dissolved oxygen

Description : Chlorination of water does not remove (A) Ammonia content (B) B.O.D. (C) Organic matter content (D) Dissolved oxygen

Last Answer : (D) Dissolved oxygen

(2) amount of oxygen used for biochemical oxidation Explanation: Biochemical oxygen demand or B.O.D. is the amount of dissolved oxygen needed by aerobic biological organisms in a body of water to break down organic material present in a given water sample at certain temperature over a specific time period. The term also refers to a chemical procedure for determining this amount. This is not a precise quantitative test, although it is widely used as an indication of the organic quality of water.

Description : (2) amount of oxygen used for biochemical oxidation Explanation: Biochemical oxygen demand or B.O.D. is the amount of dissolved oxygen needed by aerobic biological organisms in a body of water to ... quantitative test, although it is widely used as an indication of the organic quality of water.

Last Answer : The addition of gypsum to port-land cement helps in : (1) increasing the strength of cement (2) rapid setting of cement (3) preventing rapid setting of cement (4) reduction in the cost of cement

Sunlight (A) Helps growth of bacterias (B) Impedes growth of algae (C) Increases dissolved oxygen content (D) Reduces turb

Description : Sunlight  (A) Helps growth of bacterias  (B) Impedes growth of algae  (C) Increases dissolved oxygen content  (D) Reduces turb

Last Answer : (B) Impedes growth of algae

What happens to the conductivity of water when an acid is dissolved in it?

Description : What happens to the conductivity of water when an acid is dissolved in it?

Last Answer : Feel Free to Answer

Turbidity of water is ____. a. taste c. cloudiness b. smell d. content

Description : Turbidity of water is ____. a. taste c. cloudiness b. smell d. content

Last Answer : c. cloudiness

A metallic alloy in general as compared to their pure metal components is (A) More corrosion resistant (B) Having higher melting point (C) Having lower hardness, reactivity and fusibility (D) Having lower electrical conductivity

Description : A metallic alloy in general as compared to their pure metal components is (A) More corrosion resistant (B) Having higher melting point (C) Having lower hardness, reactivity and fusibility (D) Having lower electrical conductivity

Last Answer : (A) More corrosion resistant

Purity of water can be assessed by determining one of its following properties instrumentally : (A) pH (B) Refractivity (C) Viscosity (D) Conductivity

Description : Purity of water can be assessed by determining one of its following properties instrumentally : (A) pH (B) Refractivity (C) Viscosity (D) Conductivity

Last Answer : (D)Conductivity

Which of the following compounds when dissolved in water, gives a solution with pH less than seven ?

Description : Which of the following compounds when dissolved in water, gives a solution with pH less than seven ?

Last Answer : Which of the following compounds when dissolved in water, gives a solution with pH less than seven ? A. `CH_(3)COCH_( ... (5)NH_(2)` D. `C_(2)H_(5)OH`

On opening the soda water bottle the dissolved CO2 comes out, would the pH of the solution increase or decrease as the gas comes out? Give reason.

Description : On opening the soda water bottle the dissolved CO2 comes out, would the pH of the solution increase or decrease as the gas comes out? Give reason.

Last Answer : Answer. The pH of soda water increases. Because soda contains carbonic acid which is the weak one. When CO2 escape the carbonic acid’s strength weakens and therefore pH would increases.

During electrical desalting of crude oil, the electrical conductivity of a mixture of crude oil and water (which ranges between 3 to 8% water) __________ with increase in the amount of water. (A) Decreases (B) Increases (C) Remains unchanged (D) Decreases linearly

Description : During electrical desalting of crude oil, the electrical conductivity of a mixture of crude oil and water (which ranges between 3 to 8% water) __________ with increase in the amount of water. (A) Decreases (B) Increases (C) Remains unchanged (D) Decreases linearly

Last Answer : (B) Increases

Steam condensate is recovered by steam traps and recycled for use as boiler feed water, because of its low (A) Hardness (B) Dissolved solids content (C) Suspended solids content (D) All (A), (B) and (C)

Description : Steam condensate is recovered by steam traps and recycled for use as boiler feed water, because of its low (A) Hardness (B) Dissolved solids content (C) Suspended solids content (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Presence of 0.3 to 0.5% arsenic in copper increases its (A) Ductility (B) Malleability (C) Tenacity & hardness (D) Electrical conductivity

Description : Presence of 0.3 to 0.5% arsenic in copper increases its (A) Ductility (B) Malleability (C) Tenacity & hardness (D) Electrical conductivity

Last Answer : (C) Tenacity & hardness

Presence of even very minute amount (say 0.1%) of __________ in copper, reduces its electrical conductivity very seriously. (A) Bismuth (B) Arsenic (C) Antimony (D) Both (B) and (C)

Description : Presence of even very minute amount (say 0.1%) of __________ in copper, reduces its electrical conductivity very seriously. (A) Bismuth (B) Arsenic (C) Antimony (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to the decrease in electron movement (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Description : Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to ... metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Last Answer : (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal

The temperature at which the magnetic property of iron disappears (i.e., it becomes non-magnetic) and its electrical conductivity & specific heat also changes, is called the 'Curie point', which is __________ °C. (A) 768 (B) 908 (C) 1400 (D) 1539

Description : The temperature at which the magnetic property of iron disappears (i.e., it becomes non-magnetic) and its electrical conductivity & specific heat also changes, is called the 'Curie point', which is __________ °C. (A) 768 (B) 908 (C) 1400 (D) 1539

Last Answer : Option A

How does the amount of carbon diaoxide dissolved in your blood affects with your blood pH?

Description : How does the amount of carbon diaoxide dissolved in your blood affects with your blood pH?

Last Answer : Need answer

At pH 7.4, the ratio of bicarbonate : dissolved CO2 is (A) 1 : 1 (B) 10 : 1 (C) 20 : 1 (D) 40 : 1

Description : At pH 7.4, the ratio of bicarbonate : dissolved CO2 is (A) 1 : 1 (B) 10 : 1 (C) 20 : 1 (D) 40 : 1

Last Answer : Answer : C

Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity

Description : Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity

Last Answer : (C) Tensile strength

Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Description : Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Last Answer : (A) Fire clay

The electrical conductivity of a __________ decreases with rise in temperature. (A) Metal/alloy (B) Semi-conductor (C) Dielectric (D) None of these

Description : The electrical conductivity of a __________ decreases with rise in temperature. (A) Metal/alloy (B) Semi-conductor (C) Dielectric (D) None of these

Last Answer : (A) Metal/alloy

Velocity of liquid hydrocarbon fuels in a pipeline cannot be measured by magnetic flow-meters, because their __________ is very low/small. (A) Thermal conductivity (B) Electrical conductivity (C) Specific gravity

Description : Velocity of liquid hydrocarbon fuels in a pipeline cannot be measured by magnetic flow-meters, because their __________ is very low/small. (A) Thermal conductivity (B) Electrical conductivity (C) Specific gravity

Last Answer : (C) Specific gravity

The ratio of thermal & electrical conductivity is same for all the metals at the same temperature; and at around room temperature, this ratio is proportional to(where, T = absolute temperature, °K) (A) T (B) 1/T (C) T2 (D) 1/T2

Description : The ratio of thermal & electrical conductivity is same for all the metals at the same temperature; and at around room temperature, this ratio is proportional to(where, T = absolute temperature, °K) (A) T (B) 1/T (C) T2 (D) 1/T2

Last Answer : A) T

Which of the following materials has the poorest electrical conductivity? (A) Carbon (B) Aluminium (C) Silver (D) Stainless steel

Description : Which of the following materials has the poorest electrical conductivity? (A) Carbon (B) Aluminium (C) Silver (D) Stainless steel

Last Answer : (A) Carbon

With increase in temperature, the electrical conductivity of a __________ decreases. (A) Semi-conductor (B) Metal or alloy (C) Dielectric (D) None of these

Description : With increase in temperature, the electrical conductivity of a __________ decreases. (A) Semi-conductor (B) Metal or alloy (C) Dielectric (D) None of these

Last Answer : (A) Semi-conductor

Dielectric (A) Is an electrical insulating material (B) Of low resistivity is preferred (C) Should have high thermal conductivity (D) Need not defy the corrosive action of chemicals

Description : Dielectric (A) Is an electrical insulating material (B) Of low resistivity is preferred (C) Should have high thermal conductivity (D) Need not defy the corrosive action of chemicals

Last Answer : (A) Is an electrical insulating material

With increase in temperature, the electrical conductivity of semiconductors (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B), depends on the type of semi-conductor

Description : With increase in temperature, the electrical conductivity of semiconductors (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B), depends on the type of semi-conductor

Last Answer : Option A

Heavy water used in the nuclear reactors to slow down the speed of neutrons is (A) Highly purified water (B) A compound of oxygen and deuterium (C) Water having dissolved salts of heavy metals (D) None of these

Description : Heavy water used in the nuclear reactors to slow down the speed of neutrons is (A) Highly purified water (B) A compound of oxygen and deuterium (C) Water having dissolved salts of heavy metals (D) None of these

Last Answer : (B) A compound of oxygen and deuterium