Only small amount of evaporation of water produces large cooling effects because of its (A) Large latent heat (B) Low viscosity (C) Small latent heat (D) None of these

Only small amount of evaporation of water produces large cooling
effects because of its
(A) Large latent heat
(B) Low viscosity
(C) Small latent heat
(D) None of these
by

1 Answer

Answer :

(A) Large latent heat
by

Related questions

ick out the undesirable property for a good refrigerant. (A) High thermal conductivity (B) Low freezing point (C) Large latent heat of vaporisation (D) High viscosity

Description : ick out the undesirable property for a good refrigerant. (A) High thermal conductivity (B) Low freezing point (C) Large latent heat of vaporisation (D) High viscosity

Last Answer : (D) High viscosity

Water is a highly effective coolant for a car engine because _____ A. Water is good conductor of heat B. Water has very high specific heat capacity C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Description : Water is a highly effective coolant for a car engine because _____ A. Water is good conductor of heat B. Water has very high specific heat capacity C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Last Answer : ANSWER: A

Water is a highly effective coolant for a car engine because -----? A. Water is good conductor of heat B. Water has very high specific heat capacity (Answer) C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Description : Water is a highly effective coolant for a car engine because -----? A. Water is good conductor of heat B. Water has very high specific heat capacity (Answer) C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Last Answer : B. Water has very high specific heat capacity (Answer)

For the air water system under ambient conditions, the adiabatic saturation temperature and the wet bulb temperature are nearly equal, because (A) Water has a high latent heat of evaporation (B) Lewis number is close to unity (C) They are always equal under all circumstances

Description : For the air water system under ambient conditions, the adiabatic saturation temperature and the wet bulb temperature are nearly equal, because (A) Water has a high latent heat of evaporation (B) Lewis number is close to unity (C) They are always equal under all circumstances

Last Answer : (A) Water has a high latent heat of evaporation

Entrainer used in Azeotropic distillation should (A) Form a low boiling azeotrope with one of the constituents of the mixture (B) Form a new azeotrope of low relative volatility with one of the constituents of the mixture (C) Have high latent heat of vaporisation (D) Have high viscosity to provide high tray efficiency

Description : Entrainer used in Azeotropic distillation should (A) Form a low boiling azeotrope with one of the constituents of the mixture (B) Form a new azeotrope of low relative volatility with one of the ... (C) Have high latent heat of vaporisation (D) Have high viscosity to provide high tray efficiency

Last Answer : (A) Form a low boiling azeotrope with one of the constituents of the mixture

When the solvent dissolves very little of solute, then (A) Solvent of low latent heat of vaporisation should be used (B) Solvent of low freezing point should be used (C) Large quantity of solvent is required to extract the solute (D) Very small quantity of solvent is required

Description : When the solvent dissolves very little of solute, then (A) Solvent of low latent heat of vaporisation should be used (B) Solvent of low freezing point should be used (C) Large quantity of solvent is required to extract the solute (D) Very small quantity of solvent is required

Last Answer : (C) Large quantity of solvent is required to extract the solute

Heat sensitive materials with very high latent heat of vaporisation may be economically separated using (A) Liquid extraction (B) Distillation (C) Evaporation (D) Absorption

Description : Heat sensitive materials with very high latent heat of vaporisation may be economically separated using (A) Liquid extraction (B) Distillation (C) Evaporation (D) Absorption

Last Answer : (A) Liquid extraction

The surface of water in a pond remains cool even on a hot day because 1. water evaporates at the surface and evaporation causes cooling 2. the heat absorbed at the surface is transmitted downwards 3. Water in contact with the bottom of the pond becomes cool and rises to the surface due to convection Which of the above statements is/are correct? (a) 1 only (b) 3 only (c) 1 and 3 (d) 1, 2 and 3

Description : The surface of water in a pond remains cool even on a hot day because 1. water evaporates at the surface and evaporation causes cooling 2. the heat absorbed at the surface is transmitted downwards 3. Water in contact with the bottom ... /are correct? (a) 1 only (b) 3 only (c) 1 and 3 (d) 1, 2 and 3

Last Answer : Ans:(a)

Choose the correct statement (a) A refrigerant should have low latent heat (b) If operating temperature of system is low, then refrigerant with low boiling point should be used (c) Pre-cooling and sub-cooling bf refrigerant are same (d) Superheat and sensible heat of a. refrigerant are same

Description : Choose the correct statement (a) A refrigerant should have low latent heat (b) If operating temperature of system is low, then refrigerant with low boiling point should be used (c) Pre-cooling and sub-cooling bf refrigerant are same (d) Superheat and sensible heat of a. refrigerant are same

Last Answer : Ans: b

What is the latent heat of evaporation ?

Description : What is the latent heat of evaporation ?

Last Answer : : When heat is applied to a liquid, when the temperature rises to boiling point, no matter how much heat is applied, the temperature remains constant until it is completely converted into liquid vapor. The amount of heat that converts a liquid into a vapor state is the latent heat of evaporation.

High __________ is an undesirable property for a good refrigerant. (A) Specific heat (B) Latent heat of vaporisation (C) Viscosity (D) Specific vapor volume

Description : High __________ is an undesirable property for a good refrigerant. (A) Specific heat (B) Latent heat of vaporisation (C) Viscosity (D) Specific vapor volume

Last Answer : (C) Viscosity

In a cooling tower, water becomes cool by (A) Loosing sensible heat (B) Heat transfer to surroundings (C) Vaporisation due to heat loss to air (D) Loosing latent heat

Description : In a cooling tower, water becomes cool by (A) Loosing sensible heat (B) Heat transfer to surroundings (C) Vaporisation due to heat loss to air (D) Loosing latent heat

Last Answer : (A) Loosing sensible heat

In a refrigerator what produces the cooling? (1) The ice which deposits on the freezer (2) The sudden expansion of a compressed gas (3) The evaporation of a volatile liquid (4) None of these

Description : In a refrigerator what produces the cooling? (1) The ice which deposits on the freezer (2) The sudden expansion of a compressed gas (3) The evaporation of a volatile liquid (4) None of these

Last Answer : (4) None of these Explanation: Basically, refrigeration system consists of devices that compress and expand refrigerant gas. When refrigerant gas is compressed it expels heat and when it is suddenly ... inside of the fridge is cooled to a temperature below the ambient temperature of the room.

In a refrigerator what produces the cooling ? (1) The ice which deposits on the freezer (2) The sudden expansion of a compressed gas (3) The evaporation of a volatile liquid (4) None of these

Description : In a refrigerator what produces the cooling ? (1) The ice which deposits on the freezer (2) The sudden expansion of a compressed gas (3) The evaporation of a volatile liquid (4) None of these

Last Answer : None of these

Evaporative cooling process employs a combination of cooling and humidification in which the (A) Sensible heat is added (B) Sensible heat is removed and the latent heat is added (C) Latent heat is removed (D) Sensible heat is added and latent heat is removed

Description : Evaporative cooling process employs a combination of cooling and humidification in which the (A) Sensible heat is added (B) Sensible heat is removed and the latent heat is added (C) Latent heat is removed (D) Sensible heat is added and latent heat is removed

Last Answer : Option B

The outlet temperature of cooling water in a heat exchanger is generally not allowed to exceed above 50°C in industrial practice mainly to avoid (A) Its evaporation loss (B) Excessive corrosion (C) Uneconomic LMTD (D) Decrease in heat exchanger efficiency

Description : The outlet temperature of cooling water in a heat exchanger is generally not allowed to exceed above 50°C in industrial practice mainly to avoid (A) Its evaporation loss (B) Excessive corrosion (C) Uneconomic LMTD (D) Decrease in heat exchanger efficiency

Last Answer : (B) Excessive corrosion

During summer, we feel comfortable under a fan because it (a) throws cool air on us (b) sets the air in motion, thereby increasing the evaporation of sweat (c) produces convection currents (d) produces air which carries heat away from the body

Description : During summer, we feel comfortable under a fan because it (a) throws cool air on us (b) sets the air in motion, thereby increasing the evaporation of sweat (c) produces convection currents (d) produces air which carries heat away from the body

Last Answer : Ans:(b)

Describe any two sources of air leak in surface condenser. Also describe effect of air leak on latent heat of steam and cooling water requirements.

Description : Describe any two sources of air leak in surface condenser. Also describe effect of air leak on latent heat of steam and cooling water requirements.

Last Answer : ✓ The main sources of air leakage found in condenser are given below: 1) There is leakage of air from atmosphere at the joint of the parts which are internally under a pressure less ... hence evaporation enthalpy of steam increases therefore more amount of cooling water required in the condenser. 

Which of the following is not a desirable property of a refrigerant (a) highmisibility with oil (b) low boiling point (c) good electrical conductor (d) large latent heat

Description : Which of the following is not a desirable property of a refrigerant (a) highmisibility with oil (b) low boiling point (c) good electrical conductor (d) large latent heat

Last Answer : Ans: c

Water is not suitable as a calorimetric substance because it – (1) has high specific heat (2) is a good conductor (3) has high boiling point (4) low latent heat of vaporization

Description : Water is not suitable as a calorimetric substance because it – (1) has high specific heat (2) is a good conductor (3) has high boiling point (4) low latent heat of vaporization

Last Answer : (1) has high specific heat Explanation: The specific heat of water is higher than all other common substances. Hence, water is used for heating purposes (as in hot water bottles) and for cooling ... the liquids, mercury has the lowest specific heat due to which it is used as a thermometric liquid.

Water is not suitable as a calorimetric substance because it : (1) has high specific heat (2) is a good conductor (3) has high boiling point (4) low latent heat of vapourization

Description : Water is not suitable as a calorimetric substance because it : (1) has high specific heat (2) is a good conductor (3) has high boiling point (4) low latent heat of vapourization

Last Answer : has high specific heat

The snow on the mountains does not melt all at once when it is heated by the sun because _____ A. It becomes very hard It B. It reflects most of the heat from the sun C. It has a low specific heat capacity D. It has a high latent heat of fusion

Description : The snow on the mountains does not melt all at once when it is heated by the sun because _____ A. It becomes very hard It B. It reflects most of the heat from the sun C. It has a low specific heat capacity D. It has a high latent heat of fusion

Last Answer : ANSWER: B

The snow on the mountains does NOT melt all at once when it is heated by the sum because: (1) It becomes very hard (2) It reflects most of the heat from the sum (3) it has a low specific heat capacity (4) it has a high latent heat of fusion

Description : The snow on the mountains does NOT melt all at once when it is heated by the sum because: (1) It becomes very hard (2) It reflects most of the heat from the sum (3) it has a low specific heat capacity (4) it has a high latent heat of fusion

Last Answer : (2) It reflects most of the heat from the sum Explanation: Newly formed snow reflects about 90 per cent of the sunlight that falls upon it. This means that the sun is powerless to melt clean snow. And when ... on a spring day because of the sun's heat. It melts because of the warm air from the sea.

The snow on the mountains does NOT melt all at once when it is heated by the sum because: (1) It becomes very hard (2) It reflects most of the heat from the sum (3) it has a low specific heat capacity (4) it has a high latent heat of fusion

Description : The snow on the mountains does NOT melt all at once when it is heated by the sum because: (1) It becomes very hard (2) It reflects most of the heat from the sum (3) it has a low specific heat capacity (4) it has a high latent heat of fusion

Last Answer : (2) It reflects most of the heat from the sum Explanation: Newly formed snow reflects about 90 per cent of the sunlight that falls upon it. This means that the sun is powerless to melt clean snow. And when ... on a spring day because of the sun's heat. It melts because of the warm air from the sea.

The snow on the mountains does NOT melt all at once when it is heated by the sun because: (1) it becomes very hard (2) it reflects most of the heat from the sun (3) it has a low specific heat capacity (4) it has a high latent heat of fusion

Description : The snow on the mountains does NOT melt all at once when it is heated by the sun because: (1) it becomes very hard (2) it reflects most of the heat from the sun (3) it has a low specific heat capacity (4) it has a high latent heat of fusion

Last Answer : it reflects most of the heat from the sun

Which cooling Towers use a process similar to the one found in small evaporation active cooling units a) hyperbolic b) Tower c) condensate loop d) none of these

Description : Which cooling Towers use a process similar to the one found in small evaporation active cooling units a) hyperbolic b) Tower c) condensate loop d) none of these

Last Answer : a) hyperbolic

Mud houses are cooler in summers and wanner in winters as compared to brick houses because (1) mud is a good conductor (2) mud is a bad conductor (3) mud is a poor insulator (4) evaporation of water causes cooling in summers and sunlight coming through holes causes warming in winters

Description : Mud houses are cooler in summers and wanner in winters as compared to brick houses because (1) mud is a good conductor (2) mud is a bad conductor (3) mud is a poor insulator (4) evaporation of water causes cooling in summers and sunlight coming through holes causes warming in winters

Last Answer : (2) mud is a bad conductor Explanation: The houses made of mud and thatched roofs are cool in summer and warm in winter as the thatched roof contains large amount of trapped air and also mud is ... . In summer, the outside heat cannot enter the house and in winter, inside heat cannot flow outside.

Mud houses are cooler in summers and warmer in winters as compared to brick houses because (1) mud is a good conductor (2) mud is a bad conductor (3) mud is a poor insulator (4) evaporation of water causes cooling in summers and sunlight coming through holes causes warming in winters

Description : Mud houses are cooler in summers and warmer in winters as compared to brick houses because (1) mud is a good conductor (2) mud is a bad conductor (3) mud is a poor insulator (4) evaporation of water causes cooling in summers and sunlight coming through holes causes warming in winters

Last Answer : mud is a bad conductor

Though bromocriptine acts directly on dopamine receptors, it is used in parkinsonism only as a supplement to levodopa because: A. It has low efficacy B. It produces marked dyskinesias C. Used alone, its effective doses produce intolerable side effects D. Its therapeutic effect takes long time to develop

Description : Though bromocriptine acts directly on dopamine receptors, it is used in parkinsonism only as a supplement to levodopa because: A. It has low efficacy B. It produces marked dyskinesias C. ... its effective doses produce intolerable side effects D. Its therapeutic effect takes long time to develop

Last Answer : C. Used alone, its effective doses produce intolerable side effect

Water is normally used as a coolant in the heat exchange equipments mainly because of its (A) Abundance & high heat capacity (B) Low density (C) Low viscosity (D) High fluidity

Description : Water is normally used as a coolant in the heat exchange equipments mainly because of its (A) Abundance & high heat capacity (B) Low density (C) Low viscosity (D) High fluidity

Last Answer : (A) Abundance & high heat capacity

Limitations of typical tricyclic antidepressants include the following except: A. Narrow safety margin B. Low oral bioavailability C. Frequent side effects D. Long latent period for response

Description : Limitations of typical tricyclic antidepressants include the following except: A. Narrow safety margin B. Low oral bioavailability C. Frequent side effects D. Long latent period for response

Last Answer : B. Low oral bioavailability

Presence of predominantly large quantity of aromatics (polynuclear) is not desirable in aviation fuel, because it has (A) High pour point and low smoke point (B) Low viscosity index (C) High self-ignition temperature (D) All (A), (B) and (C)

Description : Presence of predominantly large quantity of aromatics (polynuclear) is not desirable in aviation fuel, because it has (A) High pour point and low smoke point (B) Low viscosity index (C) High self-ignition temperature (D) All (A), (B) and (C)

Last Answer : (B) Low viscosity index

Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of vaporisation is constant (C) Volume in the liquid state is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Description : Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of ... is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot be recovered by distillation (C) Its recovery cost by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Description : The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot ... by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Last Answer : (C) Its recovery cost by distillation may be prohibitively high

The ______ of a substance is the amount of heat that must be added or removed from a unit mass of the substance to change its temperature by one degree.  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Description : The ______ of a substance is the amount of heat that must be added or removed from a unit mass of the substance to change its temperature by one degree.  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Last Answer : Specific heat capacity

What is the extremely large amount of energy associated with the strong bonds within the nucleus of the atom itself called?  A. Chemical energy  B. Latent energy  C. Phase energy  D. Nuclear energy

Description : What is the extremely large amount of energy associated with the strong bonds within the nucleus of the atom itself called?  A. Chemical energy  B. Latent energy  C. Phase energy  D. Nuclear energy

Last Answer : Nuclear energy

Polymerisation of poly functional monomers produces polymers having (A) Good mechanical strength (B) Low viscosity (C) Low melting point (D) None of these

Description : Polymerisation of poly functional monomers produces polymers having (A) Good mechanical strength (B) Low viscosity (C) Low melting point (D) None of these

Last Answer : (A) Good mechanical strength

Paddle agitator (A) Is suitable for mixing low viscosity liquids (B) Produces axial flow (C) Moves at very high speed (D) None of these

Description : Paddle agitator (A) Is suitable for mixing low viscosity liquids (B) Produces axial flow (C) Moves at very high speed (D) None of these

Last Answer : (A) Is suitable for mixing low viscosity liquids

Make up water is supplied during cooling tower operation to compensate for water losses due to (A) Evaporation(B) Blowdown(C) Entrainment(D) All (A), (B) & (C)

Description : Make up water is supplied during cooling tower operation to compensate for water losses due to (A) Evaporation (B) Blowdown (C) Entrainment (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Make up water is required in a cooling tower to replace the water lost by (A) Evaporation (B) Drift (C) Blowdown and leakage (D) All (A), (B) and (C)

Description : Make up water is required in a cooling tower to replace the water lost by (A) Evaporation (B) Drift (C) Blowdown and leakage (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Drift in a cooling tower is (A) The water entrained by the circulating air (B) Dependent on the water lost by evaporation (C) Desirable (D) All (A), (B) & (C)

Description : Drift in a cooling tower is (A) The water entrained by the circulating air (B) Dependent on the water lost by evaporation (C) Desirable (D) All (A), (B) & (C)

Last Answer : (A) The water entrained by the circulating air

. Potable water means the water used for (A) Fire-fighting (B) Cooling (C) Drinking (D) Evaporation to produce steam

Description : . Potable water means the water used for (A) Fire-fighting (B) Cooling (C) Drinking (D) Evaporation to produce steam

Last Answer : (C) Drinking

The amount of heat energy per kilogram that must be added or removed when a substance changes from one phase to another.  a. specific heat  b. heat of expansion  c. latent heat  d. useful heat

Description : The amount of heat energy per kilogram that must be added or removed when a substance changes from one phase to another.  a. specific heat  b. heat of expansion  c. latent heat  d. useful heat

Last Answer : latent heat

What refers to the amount of energy absorbed or released during a phase-change process?  A. Molar heat  B. Latent heat  C. Vaporization heat  D. Condensation heat

Description : What refers to the amount of energy absorbed or released during a phase-change process?  A. Molar heat  B. Latent heat  C. Vaporization heat  D. Condensation heat

Last Answer : Latent heat

What refers to the amount of heat needed to raise the temperature of an object by one degree Celsius or 1K?  A. Heat capacity  B. Specific heat  C. Latent heat  D. Molar heat

Description : What refers to the amount of heat needed to raise the temperature of an object by one degree Celsius or 1K?  A. Heat capacity  B. Specific heat  C. Latent heat  D. Molar heat

Last Answer : Heat capacity

2000 kJ of heat is supplied to 500 kg of ice at 0oC. If the latent heat of fusion of ice is 335 kJ/kg then the amount of ice in kg melted will be a) 1.49 b) 83.75 c) 5.97 d) None of the above

Description : 2000 kJ of heat is supplied to 500 kg of ice at 0oC. If the latent heat of fusion of ice is 335 kJ/kg then the amount of ice in kg melted will be a) 1.49 b) 83.75 c) 5.97 d) None of the above

Last Answer : c) 5.97

Swenson-Walker crystalliser is a __________ unit. (A) Continuous (B) Batch (C) Semi-batch (D) Cooling (adiabatic)-cum-evaporation

Description : Swenson-Walker crystalliser is a __________ unit. (A) Continuous (B) Batch (C) Semi-batch (D) Cooling (adiabatic)-cum-evaporation

Last Answer : (A) Continuous

Extremely large or small volumes of fluids are generally best routed through the shell side of a shell and tube heat exchanger, because of the (A) Less corrosion problems (B) Flexibility possible in the baffle arrangement (C) Low pressure drop (D) High heat transfer co-efficient

Description : Extremely large or small volumes of fluids are generally best routed through the shell side of a shell and tube heat exchanger, because of the (A) Less corrosion problems (B) Flexibility possible in the baffle arrangement (C) Low pressure drop (D) High heat transfer co-efficient

Last Answer : (B) Flexibility possible in the baffle arrangement

Small scale evaporation is done in a (A) Heat exchanger (B) Condenser(C) Multiple effect evaporator(D) Steam jacketed kettle

Description : Small scale evaporation is done in a (A) Heat exchanger (B) Condenser (C) Multiple effect evaporator (D) Steam jacketed kettle

Last Answer : (D) Steam jacketed kettle

Vegetables are cooked in lesser time by adding a pinch of salt while cooking because (1) boiling point of water increases (2) latent heat of vaporization of water decreases (3) latent heat of vaporization of water increases (4) boiling point of water decreases

Description : Vegetables are cooked in lesser time by adding a pinch of salt while cooking because (1) boiling point of water increases (2) latent heat of vaporization of water decreases (3) latent heat of vaporization of water increases (4) boiling point of water decreases

Last Answer : (1) boiling point of water increases Explanation: Adding salt raises the boiling point of water, which allows food to cook at higher temperature. The higher the temperature, the higher the rate of heat transfer between the food and water, thus it cooks more quickly.