Mild steel storage vessels are suitable for the storage of
(A) Anhydrous ammonia
(B) Fatty acids
(C) Hydrochloric acid (95%)
(D) Sulphuric acid (25%)

1 Answer

Answer :

(A) Anhydrous ammonia

Related questions

Description : Containers made of high silicon cast iron (14% Si) are not suitable for the storage of (A) Acetic acid (B) Benzoic & boric acids (C) Phosphoric acid (95%) & sulphuric acid (95%) (D) Hydrochloric acid (concentrated)

Last Answer : (D) Hydrochloric acid (concentrated)

Description : Nickel made/clad equipments are suitable for handling (A) Ammonia (both aqueous & anhydrous) (B) Fruit juices, milk & its products and caustic soda solution (C) Nitric acid & hydrochloric acid (concentrated) (D) Sulphuric acid (concentrated)

Last Answer : (B) Fruit juices, milk & its products and caustic soda solution

Description : Out of the following, copper vessels are the most suitable for the storage of (A) Bromine (B) Dry chlorine & dry fluorine (C) Nitric acid (95% and fuming) (D) Phosphoric acid (95%) & sulphuric acid (95% and fuming)

Last Answer : (B) Dry chlorine & dry fluorine

Description : Lead lined equipments & vessels are suitable for handling (A) Hydrochloric acid (10%) (B) Nitric acid (C) Sulphuric acid upto 60°C (D) All (A), (B) and (C)

Last Answer : (C) Sulphuric acid upto 60°C

Description : What steps can be taken to avoid stress corrosion cracking (SCC) in steel vessels used for storing anhydrous ammonia?

Last Answer : The U.S. National Board of Pressure Vessel Inspectors recommends the following in one of their classic articles: 1. Pressure vessels should be fully stress relieved or fabricated with heads that ... at least 0.2 percent water to inhibit SCC. Source: National Board of Pressure Vessel Inspectors

Description : For handling sulphuric acid of 95% strength, the suitable material of construction for pipes is (A) Stainless steel (B) Cast iron (C) Aluminium (D) Nickel

Last Answer : (B) Cast iron

Description : Teflon (PTFE) is corroded by (A) Hydrochloric acid (10%) (B) Hydrochloric acid (95%) (C) Sulphuric acid (D) None of these

Last Answer : (D) None of these

Description : Rubber lined vessels are corroded by the action of (A) Aqua regia (B) Chloroform (C) Sulphuric acid (95%) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : Which of the following acids serves as an electrolyte in a lead storage battery? (1) Sulphuric acid (2) Lactic acid (3) Hydrochloric acid (4) Nitric acid

Last Answer : (1) Sulphuric acid Explanation: Dilute sulfuric acid (H2SO4) serves as the electrolyte in a lead-acid battery. Dilute sulfuric acid used for lead acid battery has ratio (to water) of 3:1 other components of the battery include: Lead peroxide (PbO2) and Sponge lead (Pb).

Description : Which of the following acids serves as an electrolyte in a lead storage battery? (1) Sulphuric acid (2) Lactic acid (3) Hydrochloric acid (4) Nitric acid

Last Answer : Sulphuric acid

Description : Cast iron vessels are not suitable for the storage of (A) Freon (B) H2SO4 (95%) at room temperature (C) H2SO4 (fuming) (D) Wet SO2

Last Answer : (D) Wet SO2

Description : The preferred material of construction for storage tanks for 98% sulphuric acid is (A) Aluminium (B) Lead (C) Stainless steel 316 (D) Mild steel

Last Answer : (B) Lead

Description : Tin vessels are corroded by (A) Anhydrous ammonia (B) Aromatic solvents (C) Synthetic detergent solution (D) None of these

Last Answer : (D) None of these

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

Description : Brass container is suitable for storing (A) Aqueous ammonia (B) Beer (C) H2SO4 (95%) (D) Phosphoric acid (95%)

Last Answer : (B) Beer

Description : Stainless steel is not corroded by (A) Hydrochloric acid (10%) (B) Nitric acid (10%) (C) Sulphuric acid (10%) (D) Saturated brine

Last Answer : (B) Nitric acid (10%)

Description : Which of the following acids is synthesized in human stomach? (1) Sulphuric acid (2) Nitric acid (3) Hydrochloric acid (4) Phosphoric acid

Last Answer : (3) Hydrochloric acid Explanation: Hydrochloric acid is sythesised in human stomach.

Description : Which one of the following acids is used in battery? (1) Hydrochloric acid (2) Hydrofluoric acid (3) Sulphuric acid (4) Sulphurous acid

Last Answer : (3) Sulphuric acid Explanation: Battery is a device consisting of one or more electrochemical cells that convert stored chemical energy into electrical energy. Possessing different chemical properties ... domestic acidic drain cleaner, electrolyte in lead-acid batteries and various cleaning agents.

Description : Which of the following acids is synthesized in human stomach ? (1) Sulphuric acid (2) Nitric acid (3) Hydrochloric acid (4) Phosphoric acid

Last Answer : Hydrochloric acid

Description : Which one of the following acids is used in battery ? (1) Hydrochloric acid (2) Hydrofluoric acid (3) Sulphuric acid (4) Sulphurous acid

Last Answer : Sulphuric acid

Description : Hydrochloric acid absorber in made of (A) Cast iron (B) Mild steel (C) Karbate (D) Stainless steel

Last Answer : (C) Karbate

Description : Acetaldehyde is produced by hydration of acetylene in a sulphuric acid solution of mercuric sulphate. Hydration tower is made of (A) Rubber lined mild steel (B) Lead lined mild steel (C) Aluminium (D) Cast iron

Last Answer : (A) Rubber lined mild steel

Description : Dilute sulphuric acid is transported in __________ pipes. (A) Mild steel (B) Lead (C) Copper (D) Special alloys

Last Answer : (B) Lead

Description : The acid used in lead storage cells is – (1) phosphoric acid (2) hydrochloric acid (3) nitric acid (4) sulphuric acid

Last Answer : (4) sulphuric acid Explanation: Lead-acid batteries, invented in 1859 by French physicist Gaston Plante, are the oldest type of rechargeable battery. Despite having a very low energy-to-weight ... attractive for use in motor vehicles to provide the high current required by automobile starter motors.

Description : The acid used in lead storage cells is – (1) phosphoric acid (2) hydrochloric acid (3) nitric acid (4) sulphuric acid

Last Answer : (4) sulphuric acid Explanation: Dilute sulfuric acid (H2SO4) serves as the electrolyte in a lead storage battery. The electrodes of the cells in a lead storage battery consist of lead grids. The openings ... spongy (porous) lead. The opehings of the cathodic grid is filled with lead dioxide (PBO2).

Description : Which acid is used in Lead storage battery? (1) Sulphuric acid (2) Nitric acid (3) Hydrochloric acid (4) Acetic acid

Last Answer : Sulphuric acid

Description : The acid used in lead storage cells is (1) phosphoric acid (2) hydrochloric acid (3) nitric acid (4) sulphuric acid

Last Answer : sulphuric acid

Description : Which of the following is not shipped in mild steel containers? (A) Acetone (B) Ammonia (C) Ethyl alcohol (D) Formic acid

Last Answer : (D) Formic acid

Description : In laboratory preparation of H2O2 from hydrated barium peroxide with sulphuric acid , anhydrous barium peroxide is not used Why ?

Last Answer : Ans-Because it forms a protective layer of barium sulphate over anhydrous barium peroxide

Description : Silicone rubber is not resistant to the corrosive action of (A) Sulphuric acid (10%) (B) Sulphuric acid (95%) (C) Ether (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Description : Polythene (low or high density) containers are not corroded by (A) Sulphuric acid (10%) at room temperature (B) Nitric acid (95%) at room temperature (C) Sulphur trioxide at 60°C (D) Any of these

Last Answer : (A) Sulphuric acid (10%) at room temperature

Description : Reaction of anhydrous liquid ammonia with ortho-phosphoric acid produces (A) Ammonium phosphate (B) Superphosphate (C) Triple superphosphate (D) None of these

Last Answer : (A) Ammonium phosphate

Description : Raw materials for nitric acid manufacture are (A) Hydrogen peroxide, air and water (B) Anhydrous ammonia and air (C) Anhydrous ammonia, air and water (D) Wet ammonia, air and water

Last Answer : (C) Anhydrous ammonia, air and water

Description : A suitable material of construction to use with fuming sulphuric acid is (A) Carbon steel (B) Stainless steel type 304 (C) Nickel (D) Monel

Last Answer : (D) Monel

Description : Complete hydrolysis of proteins produces : (a) Ammonia and carbon dioxide (b) Urea and uric acid (c) A mixture of amino acids (d) Glycogen and a fatty acid

Last Answer : A mixture of amino acids

Description : Graphite is corroded by (A) Sulphuric acid (10%) (B) Sea water (C) Hydrochloric acid (D) None of these

Last Answer : (D) None of these

Description : Raschig ring made of porcelain cannot be used for treating concentrated (A) Hydrochloric acid (B) Nitric acid (C) Alkalis (D) Sulphuric acid

Last Answer : (C) Alkalis

Description : Leaching of phosphate rock by strong __________ acid produces phosphoric acid. (A) Sulphuric (B) Hydrochloric (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

Description : Reaction of __________ acid with phosphate rock produces superphosphates. (A) Hydrochloric (B) Sulphuric (C) Nitric (D) Phosphoric

Last Answer : (B) Sulphuric

Description : Triple superphosphate is made by reacting phosphate rock with __________ acid. (A) Phosphoric (B) Nitric (C) Sulphuric (D) Hydrochloric

Last Answer : (A) Phosphoric

Description : Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and (A) Sulphuric acid (B) Phosphoric acid (C) Hydrochloric acid (D) Hydrofluoric acid

Last Answer : (A) Sulphuric acid

Description : Double Contact Double Absorption (DCDA) process is the most recent process for the manufacture of (A) Nitric acid (B) Sulphuric acid (C) Ammonium sulphate (D) Hydrochloric acid

Last Answer : (B) Sulphuric acid

Description : Mild steel is an alloy with carbon content a)0.25%. b)5% c)10%. d)25%

Last Answer : a)0.25%.

Description : Gunmetal and bronze are not corroded by the action of (A) Wet chlorine (B) Synthetic detergent solution (C) Hydrochloric acid (10%) (D) Nitric acid (< 25%

Last Answer : (B) Synthetic detergent solution

Description : The percent composition by mass of copper in anhydrous cupric sulfate is about: w) 10% x) 25% y) 40% z) 75%

Last Answer : ANSWER: C -- 40% 

Description : Fatty acids are a major energy source for the body. Which of the following statement(s) is/are true concerning the use of fatty acids as an energy source? a. Fatty acids are stored in ... 25% of total nonprotein caloric needs supplied via total parenteral nutrition should be in the form of fat

Last Answer : Answer: a, b, d In most tissues, fatty acids are readily oxidized for energy. They are especially important energy sources for the heart, liver and skeletal muscle. In ... administered to patients receiving total parenteral nutrition should comprise about 5-30% of total nonprotein caloric needs

Description : Write balanced chemical equations for the following reactions: (a) Dilute sulphuric acid reacts with aluminium powder. (b) Dilute hydrochloric acid reacts with sodium carbonate. (c) Carbon dioxide is passed through lime water. -Chemistry

Last Answer : i hope it helped you

Description : What element is in sulphuric acid hydrochloric acid nitric acid and ethanoic acid?

Last Answer : Hydrogen

Description : The acid used in a car battery is _____. A. Hydrochloric acid B. Nitric acid C. Sulphuric acid D. Carbonic acid

Last Answer : ANSWER: C

Description : The acid used in a car battery is _____. A. Hydrochloric acid B. Nitric acid C. Sulphuric acid D. Carbonic acid

Last Answer : ANSWER: C