Raw materials for nitric acid manufacture are (A) Hydrogen peroxide, air and water (B) Anhydrous ammonia and air (C) Anhydrous ammonia, air and water (D) Wet ammonia, air and water

Raw materials for nitric acid manufacture are
(A) Hydrogen peroxide, air and water
(B) Anhydrous ammonia and air
(C) Anhydrous ammonia, air and water
(D) Wet ammonia, air and water
by

1 Answer

Answer :

(C) Anhydrous ammonia, air and water
by

Related questions

Nickel made/clad equipments are suitable for handling (A) Ammonia (both aqueous & anhydrous) (B) Fruit juices, milk & its products and caustic soda solution (C) Nitric acid & hydrochloric acid (concentrated) (D) Sulphuric acid (concentrated)

Description : Nickel made/clad equipments are suitable for handling (A) Ammonia (both aqueous & anhydrous) (B) Fruit juices, milk & its products and caustic soda solution (C) Nitric acid & hydrochloric acid (concentrated) (D) Sulphuric acid (concentrated)

Last Answer : (B) Fruit juices, milk & its products and caustic soda solution

Raw materials for 'Solvay Process' for manufacture of the soda ash are (A) Salt, limestone and coke or gas(B) Ammonia, salt and limestone(C) Ammonia limestone and coke(D) None of these

Description : Raw materials for 'Solvay Process' for manufacture of the soda ash are (A) Salt, limestone and coke or gas (B) Ammonia, salt and limestone (C) Ammonia limestone and coke (D) None of these

Last Answer : (A) Salt, limestone and coke or gas

Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C) Raw materials for DDT manufacture are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine

During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Last Answer : (D) 98

Which of the following is not required in the manufacture of soda ash by Solvay process? (A) Ammonia (B) Limestone (C) Nitric acid (D) None of these

Description : Which of the following is not required in the manufacture of soda ash by Solvay process? (A) Ammonia (B) Limestone (C) Nitric acid (D) None of these

Last Answer : (C) Nitric acid

Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and (A) Sulphuric acid (B) Phosphoric acid (C) Hydrochloric acid (D) Hydrofluoric acid

Description : Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and (A) Sulphuric acid (B) Phosphoric acid (C) Hydrochloric acid (D) Hydrofluoric acid

Last Answer : (A) Sulphuric acid

The contact process is involved in the manufacture of - (1) Nitric acid (2) Sulphuric acid (3) Ammonia (4) Caustic soda

Description : The contact process is involved in the manufacture of - (1) Nitric acid (2) Sulphuric acid (3) Ammonia (4) Caustic soda

Last Answer : (2) Sulphuric acid Explanation: It is also a central substance in the chemical industry. It is widely produced by contact process. Now days, sulphuric acid is prepared by contact process all over ... process is based upon the catalytic oxidation of sulfur dioxide (SO2) to sulfur trioxide (SO3).

Pick out the wrong statement. (A) Dehydration of ammonium carbamate to produce urea is endothermic (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India is suitable (C) Gypsum (CaSO4 . 2H2O) is obtained as a by-product in the wet process for manufacture of ortho-phosphoric acid (D) Phosphate rock when reacted with dilute H2SO4 produces superphosphate

Description : Pick out the wrong statement. (A) Dehydration of ammonium carbamate to produce urea is endothermic (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India ... manufacture of ortho-phosphoric acid (D) Phosphate rock when reacted with dilute H2SO4 produces superphosphate

Last Answer : (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India is suitable

In laboratory preparation of H2O2 from hydrated barium peroxide with sulphuric acid , anhydrous barium peroxide is not used Why ?

Description : In laboratory preparation of H2O2 from hydrated barium peroxide with sulphuric acid , anhydrous barium peroxide is not used Why ?

Last Answer : Ans-Because it forms a protective layer of barium sulphate over anhydrous barium peroxide

Mild steel storage vessels are suitable for the storage of (A) Anhydrous ammonia (B) Fatty acids (C) Hydrochloric acid (95%) (D) Sulphuric acid (25%)

Description : Mild steel storage vessels are suitable for the storage of (A) Anhydrous ammonia (B) Fatty acids (C) Hydrochloric acid (95%) (D) Sulphuric acid (25%)

Last Answer : (A) Anhydrous ammonia

Reaction of anhydrous liquid ammonia with ortho-phosphoric acid produces (A) Ammonium phosphate (B) Superphosphate (C) Triple superphosphate (D) None of these

Description : Reaction of anhydrous liquid ammonia with ortho-phosphoric acid produces (A) Ammonium phosphate (B) Superphosphate (C) Triple superphosphate (D) None of these

Last Answer : (A) Ammonium phosphate

Raw materials required for the manufacture of __________ is acetylene and hydrochloric acid. (A) Phthalic anhydride (B) Vinyl chloride (C) Maleic anhydride (D) Dacron

Description : Raw materials required for the manufacture of __________ is acetylene and hydrochloric acid. (A) Phthalic anhydride (B) Vinyl chloride (C) Maleic anhydride (D) Dacron

Last Answer : (B) Vinyl chloride

Consider the production of ammonia from methene and air as raw materials. The catalysts used are: (i) __________ for steam reforming of methane and (ii) __________ for ammonia synthesis. (A) (i) - Ni/Al2O3 ; (ii) - Cu - ZnO/Al2O3 (B) (i) - Fe/Al2O3 ; (ii) - Cu - ZnO/Al2O3 (C) (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3 (D) (i) - Fe/Al2O3 ; (ii) - Ni/Al2O3

Description : Consider the production of ammonia from methene and air as raw materials. The catalysts used are: (i) __________ for steam reforming of methane and (ii) __________ for ammonia synthesis. (A) (i) - Ni/Al2O3 ; (ii) - Cu - ZnO/ ... (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3 (D) (i) - Fe/Al2O3 ; (ii) - Ni/Al2O3

Last Answer : (C) (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3

Nitric acid is produced on commercial scale in a fertiliser plant by (A) Oxidation of ammonia (B) CaNO3 + H2SO4 reaction (C) Passing air through high voltage electric arc (D) None of these

Description : Nitric acid is produced on commercial scale in a fertiliser plant by (A) Oxidation of ammonia (B) CaNO3 + H2SO4 reaction (C) Passing air through high voltage electric arc (D) None of these

Last Answer : (A) Oxidation of ammonia

Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Description : Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Last Answer : (D) None of these

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

Tin vessels are corroded by(A) Anhydrous ammonia(B) Aromatic solvents(C) Synthetic detergent solution(D) None of these

Description : Tin vessels are corroded by (A) Anhydrous ammonia (B) Aromatic solvents (C) Synthetic detergent solution (D) None of these

Last Answer : (D) None of these

What steps can be taken to avoid stress corrosion cracking (SCC) in steel vessels used for storing anhydrous ammonia?

Description : What steps can be taken to avoid stress corrosion cracking (SCC) in steel vessels used for storing anhydrous ammonia?

Last Answer : The U.S. National Board of Pressure Vessel Inspectors recommends the following in one of their classic articles: 1. Pressure vessels should be fully stress relieved or fabricated with heads that ... at least 0.2 percent water to inhibit SCC. Source: National Board of Pressure Vessel Inspectors

Which of the following is the costliest source of hydrogen needed for ammonia manufacture under Indian condition? (A) Electrolysis of water (B) Cryogenic removal of H2 from coke oven gas (C) Steam reforming of naphtha (D) Natural gas cracking

Description : Which of the following is the costliest source of hydrogen needed for ammonia manufacture under Indian condition? (A) Electrolysis of water (B) Cryogenic removal of H2 from coke oven gas (C) Steam reforming of naphtha (D) Natural gas cracking

Last Answer : (A) Electrolysis of water

A fertiliser plant is classified as a gas based fertiliser plant, when it uses__________ gas as a source of hydrogen for the manufacture of ammonia.(A) Coke oven(B) Producer(C) Natural(D) Coal

Description : A fertiliser plant is classified as a gas based fertiliser plant, when it uses__________ gas as a source of hydrogen for the manufacture of ammonia. (A) Coke oven (B) Producer (C) Natural (D) Coal

Last Answer : (C) Natural

Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely used in the manufacture of automobile tyres (C) Manufacture of phenol by chloroben-zene-eaustic process involves. The chlorination of benzene, causticisation and hydrolysis (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Description : Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely ... D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Last Answer : (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both temperature and pressure in the digestor is less in case of the sulphite method as compared to that in the sulphate method (D) None of these

Description : Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both ... in case of the sulphite method as compared to that in the sulphate method (D) None of these

Last Answer : (D) None of these

The concentration (weight %) of nitric acid produced by the oxidation of ammonia and absorption of nitrogen oxides with water is about __________ percent. (A) 60 (B) 30 (C) 95 (D) 100

Description : The concentration (weight %) of nitric acid produced by the oxidation of ammonia and absorption of nitrogen oxides with water is about __________ percent. (A) 60 (B) 30 (C) 95 (D) 100

Last Answer : (A) 60

Commonly used chemical fertilizer to con trol submerged weeds and water bloom non -selectively a). Anhydrous ammonia b). Ammonium sulphate c). Ammonium nitrate d). Urea

Description : Commonly used chemical fertilizer to con trol submerged weeds and water bloom non -selectively a). Anhydrous ammonia b). Ammonium sulphate c). Ammonium nitrate d). Urea

Last Answer : d). Urea

Neutraliser tank used for reacting nitric acid with ammonia for the production of ammonium nitrate is made of (A) Aluminium (B) Stainless steel (C) High silicon (14%) iron (D) Copper

Description : Neutraliser tank used for reacting nitric acid with ammonia for the production of ammonium nitrate is made of (A) Aluminium (B) Stainless steel (C) High silicon (14%) iron (D) Copper

Last Answer : (B) Stainless steel

Liquid ammonia and 60% nitric acid reaction (which producesammonium nitrate) is(A) Exothermic(B) Endothermic(C) Autocatalytic(D) None of these

Description : Liquid ammonia and 60% nitric acid reaction (which producesammonium nitrate) is (A) Exothermic (B) Endothermic (C) Autocatalytic (D) None of these

Last Answer : (A) Exothermic

Urea (a nitrogenous fertiliser) is produced from carbon dioxide and (A) Nitric acid (B) Ammonia (C) Ammonium nitrate (D) Nitric oxide

Description : Urea (a nitrogenous fertiliser) is produced from carbon dioxide and (A) Nitric acid (B) Ammonia (C) Ammonium nitrate (D) Nitric oxide

Last Answer : (B) Ammonia

Ammonium sulphate can be produced by reacting gypsum with (A) Ammonia (B) Ammonium carbonate (C) Nitric acid (D) None of these

Description : Ammonium sulphate can be produced by reacting gypsum with (A) Ammonia (B) Ammonium carbonate (C) Nitric acid (D) None of these

Last Answer : (B) Ammonium carbonate

Vapor phase reaction of ammonia & nitric acid to produce ammonium nitrate is termed as the __________ process. (A) Haber's (B) Stengel (C) Le-chatelier's (D) Du-pont's

Description : Vapor phase reaction of ammonia & nitric acid to produce ammonium nitrate is termed as the __________ process. (A) Haber's (B) Stengel (C) Le-chatelier's (D) Du-pont's

Last Answer : (B) Stengel

Neutralisation of nitric acid with ammonia to produce ammonium nitrate is a/an __________ reaction. (A) Catalytic (B) Endothermic (C) Exothermic (D) Autocatalytic

Description : Neutralisation of nitric acid with ammonia to produce ammonium nitrate is a/an __________ reaction. (A) Catalytic (B) Endothermic (C) Exothermic (D) Autocatalytic

Last Answer : (C) Exothermic

Montecatini process is used for the manufacture of (A) Nitric acid (B) Phosphoric acid (C) Urea (D) Calcium ammonium nitrate (CAN)

Description : Montecatini process is used for the manufacture of (A) Nitric acid (B) Phosphoric acid (C) Urea (D) Calcium ammonium nitrate (CAN)

Last Answer : (C) Urea

Pick out the wrong statement pertaining to nitric acid. (A) About 90% of nitric acid is manufactured by Ostwald's process (B) It is a strong mono basic acid which reacts with almost all the metals except noble metals (C) Yellow color of impure nitric acid is because of dissolved oxides of nitrogen (mainly NO2 ) (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

Description : Pick out the wrong statement pertaining to nitric acid. (A) About 90% of nitric acid is manufactured by Ostwald's process (B) It is a strong mono basic acid which reacts with almost all the ... (mainly NO2 ) (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

Last Answer : (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

__________ process is used for the commercial production of nitric acid by the catalytic oxidation of ammonia. (A) Solvay (B) Ostwald's (C) Haber's (D) None of these

Description : __________ process is used for the commercial production of nitric acid by the catalytic oxidation of ammonia. (A) Solvay (B) Ostwald's (C) Haber's (D) None of these

Last Answer : (B) Ostwald's

Double Contact Double Absorption (DCDA) process is the most recent process for the manufacture of (A) Nitric acid (B) Sulphuric acid (C) Ammonium sulphate (D) Hydrochloric acid

Description : Double Contact Double Absorption (DCDA) process is the most recent process for the manufacture of (A) Nitric acid (B) Sulphuric acid (C) Ammonium sulphate (D) Hydrochloric acid

Last Answer : (B) Sulphuric acid

. Nitric acid is not used in the manufacture of (A) Detergents (B) Fertilisers (C) Aqua regia (D) Explosives

Description : . Nitric acid is not used in the manufacture of (A) Detergents (B) Fertilisers (C) Aqua regia (D) Explosives

Last Answer : (A) Detergents

In which following statement are correct. (a) Anhydrous hydrogen fluroide is a liquid at ordianry temperature while other halogen acid are gases. (b)

Description : In which following statement are correct. (a) Anhydrous hydrogen fluroide is a liquid at ordianry temperature while other halogen acid are gases. (b)

Last Answer : In which following statement are correct. (a) Anhydrous hydrogen fluroide is a liquid at ordianry temperature while other ... (B) b C. (C) c D. d

Anhydrous ammonia have equivalent acidity a. 93 b. 110 c. 128d. 148

Description : Anhydrous ammonia have equivalent acidity a. 93 b. 110 c. 128 d. 148

Last Answer : d. 148

Gunmetal and bronze are not corroded by the action of (A) Wet chlorine (B) Synthetic detergent solution (C) Hydrochloric acid (10%) (D) Nitric acid (< 25%

Description : Gunmetal and bronze are not corroded by the action of (A) Wet chlorine (B) Synthetic detergent solution (C) Hydrochloric acid (10%) (D) Nitric acid (< 25%

Last Answer : (B) Synthetic detergent solution

Raw materials used for the manufacture of glass are – (1) sand, soda, limestone (2) sand, charcoal, soda (3) limestone, charcoal, sulphur (4) sand, sulphur, soda

Description : Raw materials used for the manufacture of glass are – (1) sand, soda, limestone (2) sand, charcoal, soda (3) limestone, charcoal, sulphur (4) sand, sulphur, soda

Last Answer : (1) sand, soda, limestone Explanation: Quartz sand (silica) is the main raw material in commercial glass production. While fused quartz (primarily composed of SiO2) is used for some special ... over 1200 degree C (2192 degree F). Normally, other substances are added to simplify processing.

The raw materials used in glass manufacture are

Description : The raw materials used in glass manufacture are

Last Answer : soda ash, lime stone and sand.

What are the raw materials used in the manufacture of ceramics?

Description : What are the raw materials used in the manufacture of ceramics?

Last Answer : Clay like kaolinite and bentonite, Flint, White clay, Quartz and feldspar.

Name the raw materials required for the manufacture of glass.

Description : Name the raw materials required for the manufacture of glass.

Last Answer : a) Soda Ash (Na 2 CO 3 ) b) Lime stone (CaCO 3 ) c) Sand (SiO 2 ) d) Broken pieces of glass (Cullets)

For the manufacture of Portland cement, the proportions of raw materials used, are (A) Lime 63% ; silica 22% ; other ingredients 15% (B) Lime 22% ; silica 63% ; other ingredients 15% (C) Silica 40% ; lime 40% ; other ingredients 20% (D) Silica 70% ; lime 20% ; other ingredients 10%

Description : For the manufacture of Portland cement, the proportions of raw materials used, are (A) Lime 63% ; silica 22% ; other ingredients 15% (B) Lime 22% ; silica 63% ; other ingredients 15% (C) Silica 40% ; lime 40% ; other ingredients 20% (D) Silica 70% ; lime 20% ; other ingredients 10%

Last Answer : Answer: Option A

State the raw materials for manufacturing of ammonia. Write the balanced chemical reaction also.

Description : State the raw materials for manufacturing of ammonia. Write the balanced chemical reaction also. 

Last Answer : Ammonia Raw Material Synthesis gas as a source of hydrogen Air as source of nitrogen Reaction : N2+3H2 =2NH3

Raw materials used for the manufacture of glass are (1) sand, soda, limestone (2) sand, charcoal, soda (3) limestone, charcoal, sulphur (4) sand, sulphur, soda

Description : Raw materials used for the manufacture of glass are (1) sand, soda, limestone (2) sand, charcoal, soda (3) limestone, charcoal, sulphur (4) sand, sulphur, soda 

Last Answer : sand, soda, limestone

In the manufacture of cement, the dry of wet mixtue of calcareous and argillaceous materials is burnt in a (a) A Rotary kiln (b) A Grinder (c) Country kiln (d) All the above

Description : In the manufacture of cement, the dry of wet mixtue of calcareous and argillaceous materials is burnt in a (a) A Rotary kiln (b) A Grinder (c) Country kiln (d) All the above

Last Answer : (a) A Rotary kiln

Saw dust can be rendered chemically inert by boiling it in water containing (A) Ferrous sulphate (B) Potassium chloride (C) Ammonia (D) Nitric acid

Description : Saw dust can be rendered chemically inert by boiling it in water containing (A) Ferrous sulphate (B) Potassium chloride (C) Ammonia (D) Nitric acid

Last Answer : Answer: Option A

Which of the process is known as nitrification? (1) Reaction of Nitrogen Monoxide with oxygen to form nitric acid (2) Reaction of nitrogen dioxide with water to form nitric acid (3) Conversion of ammonia to nitrites (4) Conversion of nitrite to nitric oxide

Description : Which of the process is known as nitrification? (1) Reaction of Nitrogen Monoxide with oxygen to form nitric acid (2) Reaction of nitrogen dioxide with water to form nitric acid (3) Conversion of ammonia to nitrites (4) Conversion of nitrite to nitric oxide

Last Answer : Conversion of ammonia to nitrites

Which of the following gases is known as “Laughing Gas”? (1) Nitrous oxide (2) Nitrogen peroxide (3) Nitrogen (4) Nitric oxide

Description : Which of the following gases is known as “Laughing Gas”? (1) Nitrous oxide (2) Nitrogen peroxide (3) Nitrogen (4) Nitric oxide

Last Answer : (1) Nitrous oxide Explanation: Nitrous oxide (N2O) is commonly known as laughing gas. It is used in surgery and dentistry for its anaesthetic and analgesic effects. It is known as "laughing gas ... effects of inhaling it, a property that has led to its recreational use as a dissociative anaesthetic.

Which of the following gases is known as “Laughing Gas”? (1) Nitrous oxide (2) Nitrogen peroxide (3) Nitrogen (4) Nitric oxide

Description : Which of the following gases is known as “Laughing Gas”? (1) Nitrous oxide (2) Nitrogen peroxide (3) Nitrogen (4) Nitric oxide

Last Answer : Nitrous oxide