Dilute sulphuric acid is transported in __________ pipes. (A) Mild steel (B) Lead (C) Copper (D) Special alloys

Dilute sulphuric acid is transported in __________ pipes.
(A) Mild steel
(B) Lead
(C) Copper
(D) Special alloys
by

1 Answer

Answer :

(B) Lead
by

Related questions

The preferred material of construction for storage tanks for 98% sulphuric acid is (A) Aluminium (B) Lead (C) Stainless steel 316 (D) Mild steel

Description : The preferred material of construction for storage tanks for 98% sulphuric acid is (A) Aluminium (B) Lead (C) Stainless steel 316 (D) Mild steel

Last Answer : (B) Lead

Acetaldehyde is produced by hydration of acetylene in a sulphuric acid solution of mercuric sulphate. Hydration tower is made of (A) Rubber lined mild steel (B) Lead lined mild steel (C) Aluminium (D) Cast iron

Description : Acetaldehyde is produced by hydration of acetylene in a sulphuric acid solution of mercuric sulphate. Hydration tower is made of (A) Rubber lined mild steel (B) Lead lined mild steel (C) Aluminium (D) Cast iron

Last Answer : (A) Rubber lined mild steel

Lead is poured into the joint between two- __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement

Description : Lead is poured into the joint between two- __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement

Last Answer : (C) Cast iron

Lead is poured into the joint between two __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement

Description : Lead is poured into the joint between two __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement

Last Answer : Option C

The shafts are made of a. mild steel b. alloy steel c. copper alloys d. cast iron.

Description : The shafts are made of a. mild steel b. alloy steel c. copper alloys d. cast iron.

Last Answer : d. cast iron.

Lead pipes are not safe for carrying drinking water because water containing dissolved oxygen attacks lead thereby forming poisonous Pb (OH)2 . Lead pipes are readily corroded by (A) Dilute HCI (B) Acetic acid (C) Concentrated H2SO4 (D) None of these

Description : Lead pipes are not safe for carrying drinking water because water containing dissolved oxygen attacks lead thereby forming poisonous Pb (OH)2 . Lead pipes are readily corroded by (A) Dilute HCI (B) Acetic acid (C) Concentrated H2SO4 (D) None of these

Last Answer : (B) Acetic acid

Lead pipes are not safe for carrying drinking water, because water, containing dissolved oxygen attacks lead thereby forming poisonous Pb(OH)2 . Lead pipes are readily corroded by (A) Dilute HCl (B) Acetic acid (C) Concentrated H2SO4 (D) None of these

Description : Lead pipes are not safe for carrying drinking water, because water, containing dissolved oxygen attacks lead thereby forming poisonous Pb(OH)2 . Lead pipes are readily corroded by (A) Dilute HCl (B) Acetic acid (C) Concentrated H2SO4 (D) None of these

Last Answer : (B) Acetic acid

________ does not react with dilute hydrochloric acid but reacts with sulphuric acid and does not liberate hydrogen gas. a) iron b)copper c)gold d)zinc

Description : ________ does not react with dilute hydrochloric acid but reacts with sulphuric acid and does not liberate hydrogen gas. a) iron b)copper c)gold d)zinc

Last Answer : b)copper

Mild steel storage vessels are suitable for the storage of (A) Anhydrous ammonia (B) Fatty acids (C) Hydrochloric acid (95%) (D) Sulphuric acid (25%)

Description : Mild steel storage vessels are suitable for the storage of (A) Anhydrous ammonia (B) Fatty acids (C) Hydrochloric acid (95%) (D) Sulphuric acid (25%)

Last Answer : (A) Anhydrous ammonia

For handling sulphuric acid of 95% strength, the suitable material of construction for pipes is (A) Stainless steel (B) Cast iron (C) Aluminium (D) Nickel

Description : For handling sulphuric acid of 95% strength, the suitable material of construction for pipes is (A) Stainless steel (B) Cast iron (C) Aluminium (D) Nickel

Last Answer : (B) Cast iron

Bush bearings are made of (A) Mild steel (B) Phosphorous bronze (C) White metal alloys (D) None of these

Description : Bush bearings are made of (A) Mild steel (B) Phosphorous bronze (C) White metal alloys (D) None of these

Last Answer : (B) Phosphorous bronze

Thermometer bulb & capillary in case of mercury filled pressure spring expansion thermometer is normally made of __________ as mercury does not amalgamate with it. (A) Copper (B) Copper alloys (C) Stainless steel (D) Monel

Description : Thermometer bulb & capillary in case of mercury filled pressure spring expansion thermometer is normally made of __________ as mercury does not amalgamate with it. (A) Copper (B) Copper alloys (C) Stainless steel (D) Monel

Last Answer : (C) Stainless steel

The shaft are made of (a) Mild steel (b) alloy steel (c) Cooper alloys (d) Any of these

Description : The shaft are made of (a) Mild steel (b) alloy steel (c) Cooper alloys (d) Any of these

Last Answer : (d) Any of these

Out of the following, the __________ pipe has the least corrosion resistance. (A) Mild steel (B) Copper (C) Cast iron (D) Wrought iron

Description : Out of the following, the __________ pipe has the least corrosion resistance. (A) Mild steel (B) Copper (C) Cast iron (D) Wrought iron

Last Answer : D) Wrought iron

Coke oven gas is stripped of its H2S and mercaptans content by (A) Absorption in wash oil (B) Adsorption on bog iron bed (C) Bubbling it through dilute sulphuric acid (D) Adsorption on silica gel

Description : Coke oven gas is stripped of its H2S and mercaptans content by (A) Absorption in wash oil (B) Adsorption on bog iron bed (C) Bubbling it through dilute sulphuric acid (D) Adsorption on silica gel

Last Answer : (B) Adsorption on bog iron bed

Reaction of dilute sulphuric acid with phosphate rock produces (A) Phosphoric acid (B) Superphosphate (C) Triple superphosphate (D) Gypsum

Description : Reaction of dilute sulphuric acid with phosphate rock produces (A) Phosphoric acid (B) Superphosphate (C) Triple superphosphate (D) Gypsum

Last Answer : (A) Phosphoric acid

Sulphuric acid completely saturated with sulphur trioxide is called (A) Concentrated sulphuric acid (B) Oleum (C) Sulphurous acid (D) Dilute sulphuric acid

Description : Sulphuric acid completely saturated with sulphur trioxide is called (A) Concentrated sulphuric acid (B) Oleum (C) Sulphurous acid (D) Dilute sulphuric acid

Last Answer : (A) Concentrated sulphuric acid

In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel

Description : In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel

Last Answer : (B) Cast iron

Sulphur melting pit in the sulphuric acid plant is made of (A) Lead lined stainless steel (B) Cast iron (C) Steel or cement-brick lined (D) Hard wood

Description : Sulphur melting pit in the sulphuric acid plant is made of (A) Lead lined stainless steel (B) Cast iron (C) Steel or cement-brick lined (D) Hard wood

Last Answer : (C) Steel or cement-brick lined

Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with(A) Acidic refractory(B) Rubber(C) Karbate(D) Lead or acid proof bricks

Description : Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with (A) Acidic refractory (B) Rubber (C) Karbate (D) Lead or acid proof bricks

Last Answer : (A) Acidic refractory

Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with (A) Acidic refractory (B) Rubber (C) Karbate (D) Lead or acid-proof bricks

Description : Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with (A) Acidic refractory (B) Rubber (C) Karbate (D) Lead or acid-proof bricks

Last Answer : (D) Lead or acid-proof bricks

On being hit with a hammer, __________ will readily fracture. (A) Brass (B) Mild steel (C) Cast iron (D) Lead

Description : On being hit with a hammer, __________ will readily fracture. (A) Brass (B) Mild steel (C) Cast iron (D) Lead

Last Answer : C) Cast iron

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

For platinum thermocouples, lead wires are made of (A) Copper & copper-nickel alloys (B) Copper & iron (C) Iron & nickel (D) Tin & nickel

Description : For platinum thermocouples, lead wires are made of (A) Copper & copper-nickel alloys (B) Copper & iron (C) Iron & nickel (D) Tin & nickel

Last Answer : (A) Copper & copper-nickel alloys

Muntz metal is a/an alloys of (A) Magnesium & tin (B) Ferrous material (C) Lead & tin (D) Copper & zinc

Description : Muntz metal is a/an alloys of (A) Magnesium & tin (B) Ferrous material (C) Lead & tin (D) Copper & zinc

Last Answer : (D) Copper & zinc

Which of the following is not used as a bearing material? (A) Copper-lead alloys (B) Babbitts (C) Bronzes (D) Cermets

Description : Which of the following is not used as a bearing material? (A) Copper-lead alloys (B) Babbitts (C) Bronzes (D) Cermets

Last Answer : Option D

Ammonium chloride solution is stored/ treated in __________ vessels/pipes. (A) Plain carbon steel (B) Stainless steel (C) Rubber or durmet-20 lined (D) Lead

Description : Ammonium chloride solution is stored/ treated in __________ vessels/pipes. (A) Plain carbon steel (B) Stainless steel (C) Rubber or durmet-20 lined (D) Lead

Last Answer : (C) Rubber or durmet-20 lined

Lead is poured into the joints between two __________ pipes. (A) Cast iron (B) Steel (C) Concrete (D) Plastic

Description : Lead is poured into the joints between two __________ pipes. (A) Cast iron (B) Steel (C) Concrete (D) Plastic

Last Answer : (A) Cast iron

Mild steel is used for (A) Structural works in beams, joints and girders (B) Small sized water pipes (C) Columns and struts (D) None of these

Description : Mild steel is used for (A) Structural works in beams, joints and girders (B) Small sized water pipes (C) Columns and struts (D) None of these

Last Answer : Answer: Option A

Write the molecular formulae of: 1. Copper oxide 2. Iron (III) chloride 3. Sodium hydroxide 4. Iron (II) sulphide 5. Lead (II) oxide 6. Hydrogen nitrate (nitric acid) 7. Hydrogen sulphate (sulphuric acid) 8. Calcium hydroxide 9. Magnesium carbonate 10.Ammonium carbonate

Description : Write the molecular formulae of: 1. Copper oxide 2. Iron (III) chloride 3. Sodium hydroxide 4. Iron (II) sulphide 5. Lead (II) oxide 6. Hydrogen nitrate (nitric ... Hydrogen sulphate (sulphuric acid) 8. Calcium hydroxide 9. Magnesium carbonate 10.Ammonium carbonate

Last Answer : 1. Copper oxide - CuO 2. Iron (III) chloride - FeCl3 3. Sodium hydroxide - NaOH 4. Iron (II) sulphide - FeS 5. Lead (II) oxide - PbO 6. Hydrogen nitrate (nitric acid) - HNO3 7. ... ) - H2SO4 8. Calcium hydroxide - Ca(OH)2 9. Magnesium carbonate - MgCO3 10.Ammonium carbonate - (NH4)2CO3

Write balanced chemical equations for the following reactions: (a) Dilute sulphuric acid reacts with aluminium powder. (b) Dilute hydrochloric acid reacts with sodium carbonate. (c) Carbon dioxide is passed through lime water. -Chemistry

Description : Write balanced chemical equations for the following reactions: (a) Dilute sulphuric acid reacts with aluminium powder. (b) Dilute hydrochloric acid reacts with sodium carbonate. (c) Carbon dioxide is passed through lime water. -Chemistry

Last Answer : i hope it helped you

When concentrated sulphuric acid awas treated with potassium ferrocyanide, CO gas was evolved. By mistake, somebody used dilute sulphuric acid instead

Description : When concentrated sulphuric acid awas treated with potassium ferrocyanide, CO gas was evolved. By mistake, somebody used dilute sulphuric acid instead

Last Answer : When concentrated sulphuric acid awas treated with potassium ferrocyanide, CO gas was evolved. By mistake, somebody used ... C. `N_(2)` D. `CO_(2)`

How do you prepare dilute sulphuric acid?

Description : How do you prepare dilute sulphuric acid?

Last Answer : 20 ml 2 normal dilute sulphuric acid means?

What do you observe when (a) dilute sulphuric acid is added to granulated zinc?

Description : What do you observe when (a) dilute sulphuric acid is added to granulated zinc?

Last Answer : Zinc reacts with dilute sulphuric acid to produce effervescence and hydrogen gas is evolved.

Which of the following acid is also known as vinegar? (a) Dilute hydrochloric acid (b) Dilute sulphuric acid (c) Dilute acetic acid (d) Dilute tartaric acid

Description : Which of the following acid is also known as vinegar? (a) Dilute hydrochloric acid (b) Dilute sulphuric acid (c) Dilute acetic acid (d) Dilute tartaric acid

Last Answer : (c) Dilute acetic acid

Which one of the following is commonly used for pulp bleaching in the paper industry? (1) Mild sulphuric acid (2) Glucose isomerase (3) Hydrogen peroxide (4) Iodine and water

Description : Which one of the following is commonly used for pulp bleaching in the paper industry? (1) Mild sulphuric acid (2) Glucose isomerase (3) Hydrogen peroxide (4) Iodine and water

Last Answer : (3) Hydrogen peroxide Explanation: Bleaching of wood pulp is the chemical processing carried out to decrease the color of the pulp, so that it becomes whiter. Alkaline hydrogen ... responsible for absorbing visible light. The decomposition of hydrogen peroxide is catalyzed by transition metals.

Which one of the following is commonly used for pulp bleaching in the paper industry? (1) Mild sulphuric acid (2) Glucose isomerase (3) Hydrogen peroxide (4) Iodine and water

Description : Which one of the following is commonly used for pulp bleaching in the paper industry? (1) Mild sulphuric acid (2) Glucose isomerase (3) Hydrogen peroxide (4) Iodine and water

Last Answer :  Hydrogen peroxide

__________ plant emits large amount of SO2 as an air pollutant. (A) Nitric acid (B) Sulphuric acid (C) Chlor alkali (D) Iron & steel

Description : __________ plant emits large amount of SO2 as an air pollutant. (A) Nitric acid (B) Sulphuric acid (C) Chlor alkali (D) Iron & steel

Last Answer : (B) Sulphuric acid

. Sulphuric acid is mainly used in the __________ industry. (A) Fertiliser (B) Steel (C) Pape(D) Paint

Description : . Sulphuric acid is mainly used in the __________ industry. (A) Fertiliser (B) Steel (C) Pap (D) Paint

Last Answer : (A) Fertiliser

Locomotive boiler tubes are made of __________ alloys. (A) Arsenic copper (B) Magnesium (C) Aluminium (D) Nickel

Description : Locomotive boiler tubes are made of __________ alloys. (A) Arsenic copper (B) Magnesium (C) Aluminium (D) Nickel

Last Answer : (A) Arsenic copper

Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron

Description : Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron

Last Answer : (B) Manganese

Nickel base alloys with __________ are known as monel metal. (A) Zinc (B) Tin (C) Copper (D) Molybdenum

Description : Nickel base alloys with __________ are known as monel metal. (A) Zinc (B) Tin (C) Copper (D) Molybdenum

Last Answer : (C) Copper

H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin

The 'bomb' in the bomb calorimeter is made of (A) Molybdenum stainless steel(B) Mild steel(C) High silicon iron (14% Si)(D) Copper

Description : The 'bomb' in the bomb calorimeter is made of (A) Molybdenum stainless steel (B) Mild steel (C) High silicon iron (14% Si) (D) Copper

Last Answer : (A) Molybdenum stainless steel

Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber, Kel-F and Teflon (B) Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon

Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the tip diameter should be equal to t (where, t = plate thickness to be welded) (C) In spot welding, two pieces to be joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Description : Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the ... joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Last Answer : (D) Mild steel sheet cannot be spot welded

The joint for soldering is supported by binding wire made of (A) Mild steel (B) Copper (C) Soft iron (D) Stainless steel

Description : The joint for soldering is supported by binding wire made of (A) Mild steel (B) Copper (C) Soft iron (D) Stainless steel

Last Answer : Option C

__________ alloys have the highest specific strength of all the structural materials out of the following. (A) Magnetic steel (B) Titanium (C) Chromium (D) Magnesium

Description : __________ alloys have the highest specific strength of all the structural materials out of the following. (A) Magnetic steel (B) Titanium (C) Chromium (D) Magnesium

Last Answer : (B) Titanium

Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction (D) Nichrome, a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Description : Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction ... , a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Last Answer : (B) Presence of silicon in steel decreases its electrical resistance

The coefficient of static friction will have the highest value in case of a.Mild steel and mild steel b.Mild steel and copper c.Cast iron and steel d.Rope and wood e.Any of the above loctions

Description : The coefficient of static friction will have the highest value in case of a.Mild steel and mild steel b.Mild steel and copper c.Cast iron and steel d.Rope and wood e.Any of the above loctions

Last Answer : d. Rope and wood