High carbon steel contains more than __________ percent carbon. (A) 0.5 (B) 2.2 (C) 2.5 (D) 2.8

High carbon steel contains more than __________ percent carbon.
(A) 0.5
(B) 2.2
(C) 2.5
(D) 2.8
by

1 Answer

Answer :

(A) 0.5
by

Related questions

Maximum change in the hardness of martensite occurs in the carbon content range of __________ percent in steel. (A) 0.01 to 0.10 (B) 0.2 to 0.4 (C) 0.5 to 0.7 (D) 0.8 to 1.0

Description : Maximum change in the hardness of martensite occurs in the carbon content range of __________ percent in steel. (A) 0.01 to 0.10 (B) 0.2 to 0.4 (C) 0.5 to 0.7 (D) 0.8 to 1.0

Last Answer : (B) 0.2 to 0.4

The impure iron (pig iron) that is tapped out from blast furnace contains about __________ percent carbon. (A) 0.2 (B) 2 (C) 4 (D) 8

Description : The impure iron (pig iron) that is tapped out from blast furnace contains about __________ percent carbon. (A) 0.2 (B) 2 (C) 4 (D) 8

Last Answer : (C) 4

The minimum carbon content in steel should be __________ percent for it to respond to a hardening treatment. (A) 0.2 (B) 0.4 (C) 0.6 (D) 0.8

Description : The minimum carbon content in steel should be __________ percent for it to respond to a hardening treatment. (A) 0.2 (B) 0.4 (C) 0.6 (D) 0.8

Last Answer : Option A

Dead mild steel, which contains 0.10 to 0.15 percent carbon is used for making (A) Shafts (B) Flanges (C) Gears (D) Shear blades

Description : Dead mild steel, which contains 0.10 to 0.15 percent carbon is used for making (A) Shafts (B) Flanges (C) Gears (D) Shear blades

Last Answer : (B) Flanges

Steel will respond to hardening by heat treatment processes, only when the minimum carbon content in it is __________ percent. (A) 0.02 (B) 0.2 (C) 0.35 (D) 0.5

Description : Steel will respond to hardening by heat treatment processes, only when the minimum carbon content in it is __________ percent. (A) 0.02 (B) 0.2 (C) 0.35 (D) 0.5

Last Answer : (B) 0.2

Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2

Description : Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2

Last Answer : (B) 0.35 to 0.45

Carbon content in steel is __________ percent. (A) 0.1-2 (B) 4-6 (C) 2-4 (D) 0.001-0.01

Description : Carbon content in steel is __________ percent. (A) 0.1-2 (B) 4-6 (C) 2-4 (D) 0.001-0.01

Last Answer : (A) 0.1-2

With increasing carbon percent in steel beyond 0.8%, its ultimate tensile strength (UTS) and __________ is not affected. (A) Impact strength (B) Percent elongation (C) Hardness (D) Both 'b' & 'c'

Description : With increasing carbon percent in steel beyond 0.8%, its ultimate tensile strength (UTS) and __________ is not affected. (A) Impact strength (B) Percent elongation (C) Hardness (D) Both 'b' & 'c'

Last Answer : (A) Impact strength

Austenitic manganese steel used for making jaws of crushing machines contains about __________ percent manganese. (A) 1.5-2 (B) 3.5-4.5 (C) 7-9 (D) 12-14

Description : Austenitic manganese steel used for making jaws of crushing machines contains about __________ percent manganese. (A) 1.5-2 (B) 3.5-4.5 (C) 7-9 (D) 12-14

Last Answer : (D) 12-14

Cast iron contains __________ percent carbon. (A) 2.5 (B) 3.75 (C) 4.75 (D) 5.25

Description : Cast iron contains __________ percent carbon. (A) 2.5 (B) 3.75 (C) 4.75 (D) 5.25

Last Answer : Option A

Natural water contains approximately __________ percent of heavy water. (A) 0.015 (B) 0.71 (C) 1.2 (D) 3.5

Description : Natural water contains approximately __________ percent of heavy water. (A) 0.015 (B) 0.71 (C) 1.2 (D) 3.5

Last Answer : A) 0.015

Maximum carbon content in cast iron is __________ percent. (A) 3.8 (B) 5.2 (C) 4.8 (D) 4.3

Description : Maximum carbon content in cast iron is __________ percent. (A) 3.8 (B) 5.2 (C) 4.8 (D) 4.3

Last Answer : (D) 4.3

Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505 (D) 0.805

Description : Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505 (D) 0.805

Last Answer : (B) 0.055

Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505

Description : Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505

Last Answer : Option A

Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505 (D) 0.805

Description : Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505 (D) 0.805

Last Answer : Option A

Which one contains the least percentage of carbon?(A) Wrought iron (B) High speed steel (C) Cast iron (D) Pig iron

Description : Which one contains the least percentage of carbon? (A) Wrought iron (B) High speed steel (C) Cast iron (D) Pig iron

Last Answer : (A) Wrought iron

Steel contains – (1) 0.1 - 2% carbon (2) 5 - 10% carbon (3) more than 10% carbon (4) no carbon

Description : Steel contains – (1) 0.1 - 2% carbon (2) 5 - 10% carbon (3) more than 10% carbon (4) no carbon

Last Answer : (1) 0.1 - 2% carbon Explanation: Steel is an alloy made by combining iron and other elements, the most common of these being carbon. When carbon is used, its content in the steel is ... act as a hardening agent, preventing dislocations in the iron atom crystal lattice from sliding past one another.

Steel contains (1) 0.1 – 2% carbon (2) 5 – 10% carbon (3) more than 10% carbon (4) no carbon

Description : Steel contains (1) 0.1 – 2% carbon (2) 5 – 10% carbon (3) more than 10% carbon (4) no carbon

Last Answer :  0.1 – 2% carbon

Paper grade bamboo contains about __________ percent cellulose. (A) 5 (B) 20 (C) 40 (D) 60

Description : Paper grade bamboo contains about __________ percent cellulose. (A) 5 (B) 20 (C) 40 (D) 60

Last Answer : (A) 5

Pure rectified spirit contains about __________ percent alcohol. (A) 45 (B) 70 (C) 95 (D) 99.5

Description : Pure rectified spirit contains about __________ percent alcohol. (A) 45 (B) 70 (C) 95 (D) 99.5

Last Answer : (C) 95

Fish contains about __________ percent oil. (A) 5 (B) 10 (C) 20 (D) 35

Description : Fish contains about __________ percent oil. (A) 5 (B) 10 (C) 20 (D) 35

Last Answer : (C) 20

Hard steel contains – (1) 2 to 5 per cent carbon (2) 0.5 to 1.5 per cent carbon (3) 0.1 to 0.4 per cent carbon (4) 0.01 to 0.04 per cent carbon

Description : Hard steel contains – (1) 2 to 5 per cent carbon (2) 0.5 to 1.5 per cent carbon (3) 0.1 to 0.4 per cent carbon (4) 0.01 to 0.04 per cent carbon

Last Answer : (2) 0.5 to 1.5 per cent carbon Explanation: The term hardened steel is often used for a medium or high carbon steel that has been given the heat treatments of quenching followed by ... In contrast, the same steel composition in annealed state will be softer as required for forming and machining.

Steel contains carbon approximately (A) 1.50% to 5.6% (B) 0.05% to 1.75% (C) 0.25 % (D) None to these

Description : Steel contains carbon approximately (A) 1.50% to 5.6% (B) 0.05% to 1.75% (C) 0.25 % (D) None to these

Last Answer : Answer: Option B

The steel mainly contains how much percentage of carbon a) 0.70 to 0.80% b) to 0.3 % c) 0.5 to 0.1 %

Description : The steel mainly contains how much percentage of carbon a) 0.70 to 0.80% b) to 0.3 % c) 0.5 to 0.1 %

Last Answer : 0.70 to 0.80%

Hard steel contains (1) 2 to 5 per cent carbon (2) 0.5 to 1.5 per cent carbon (3) 0.1 to 0.4 per cent carbon (4) 0.01 to 0.04 per cent carbon

Description : Hard steel contains (1) 2 to 5 per cent carbon (2) 0.5 to 1.5 per cent carbon (3) 0.1 to 0.4 per cent carbon (4) 0.01 to 0.04 per cent carbon

Last Answer :  0.5 to 1.5 per cent carbon

Indian monazite sand contains __________ percent thorium. (A) 10 (B) 25 (C) 60 (D) 90

Description : Indian monazite sand contains __________ percent thorium. (A) 10 (B) 25 (C) 60 (D) 90

Last Answer : (A) 10

Thermal nuclear reactors using enriched uranium as fuel contains a maximum of __________ percent fissile material i.e. U-235. (A) 1 (B) 2 (C) 3 (D) 7

Description : Thermal nuclear reactors using enriched uranium as fuel contains a maximum of __________ percent fissile material i.e. U-235. (A) 1 (B) 2 (C) 3 (D) 7

Last Answer : (C) 3

Average human body contains about __________ percent water by weight. (A) 20 (B) 40 (C) 70 (D) 85

Description : Average human body contains about __________ percent water by weight. (A) 20 (B) 40 (C) 70 (D) 85

Last Answer : (C) 70

Which one of the following contains maximum percentage of carbon? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Description : Which one of the following contains maximum percentage of carbon? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Last Answer : (1) Cast iron Explanation: Cast Iron is a hard, brittle, nonmalleable iron-carbon alloy, cast into shape, containing 2 to 4.5 percent carbon. Steels contain less than 2% and usually less than 1% carbon, ... percent carbon. Wrought iron is an iron alloy with very low carbon (0.04 to 0.08%) content.

Which one of the following contains maximum percentage of carbon ? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Description : Which one of the following contains maximum percentage of carbon ? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Last Answer : Cast iron

The thermal efficiency of a steel slab reheating furnace (walking beam type) may be about __________ percent. (A) 15 (B) 40 (C) 70 (D) 85

Description : The thermal efficiency of a steel slab reheating furnace (walking beam type) may be about __________ percent. (A) 15 (B) 40 (C) 70 (D) 85

Last Answer : (B) 40

Which of the following contains maximum percentage of carbon? (A) Boiler plate steel (B) Rail steel (C) Saws for cutting steel (D) Railway spring steel

Description : Which of the following contains maximum percentage of carbon? (A) Boiler plate steel (B) Rail steel (C) Saws for cutting steel (D) Railway spring steel

Last Answer : (C) Saws for cutting steel

Mild steel is a/an __________ steel. (A) Low carbon (B) Medium carbon (C) High carbon (D) High alloy

Description : Mild steel is a/an __________ steel. (A) Low carbon (B) Medium carbon (C) High carbon (D) High alloy

Last Answer : (A) Low carbon

Ball bearings are normally made of __________ steel. (A) High speed (B) High carbon (C) Chrome (D) Silicon

Description : Ball bearings are normally made of __________ steel. (A) High speed (B) High carbon (C) Chrome (D) Silicon

Last Answer : (C) Chrome

Mild steel is a/an __________ steel. (A) Low carbon (B) Medium carbon (C) High carbon (D) High alloy

Description : Mild steel is a/an __________ steel. (A) Low carbon (B) Medium carbon (C) High carbon (D) High alloy

Last Answer : (A) Low carbon

Highest cutting speed is achieved by the __________ tool material. (A) High speed steel (B) Carbide (C) Cast alloy (D) Plain carbon steel

Description : Highest cutting speed is achieved by the __________ tool material. (A) High speed steel (B) Carbide (C) Cast alloy (D) Plain carbon steel

Last Answer : (B) Carbide

Powder metallurgy technique is used in the production of __________ tools. (A) Tungsten carbide (B) High carbon steel (C) High speed steel (D) Drilling

Description : Powder metallurgy technique is used in the production of __________ tools. (A) Tungsten carbide (B) High carbon steel (C) High speed steel (D) Drilling

Last Answer : Option A

Statement -1Wrought iron in more malleable and ducitlle than steel. Statement -2: It contains slightly less percentage of carbon.

Description : Statement -1Wrought iron in more malleable and ducitlle than steel. Statement -2: It contains slightly less percentage of carbon.

Last Answer : Statement -1Wrought iron in more malleable and ducitlle than steel. Statement -2: It contains slightly less percentage of carbon.

Straight silicon steel (containing Si from 0.5 to 5%) because of their low hysteresis loss and high magnetic permeability are used for electrical appliances. Which of the following electrical appliances made of silicon steel contains maximum percentage of silicon (about 4%)? (A) Armature of small motors/generators (B) Generators and small motors (C) Induction motors (D) High frequency transformers

Description : Straight silicon steel (containing Si from 0.5 to 5%) because of their low hysteresis loss and high magnetic permeability are used for electrical appliances. Which of the following electrical ... /generators (B) Generators and small motors (C) Induction motors (D) High frequency transformers

Last Answer : (D) High frequency transformers

Carbon percentage in medium carbon steel is around (A) 0.1 to 0.35 (B) 0.35 to 0.5 (C) 0.8 to 1.4 (D) 1 to 1. 5

Description : Carbon percentage in medium carbon steel is around (A) 0.1 to 0.35 (B) 0.35 to 0.5 (C) 0.8 to 1.4 (D) 1 to 1. 5

Last Answer : (B) 0.35 to 0.5

Carbon Content by weight in air dried wood may be about __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Description : Carbon Content by weight in air dried wood may be about __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Last Answer : (C) 50

Carbon content of pitch (residue of coal tar distillation) is around __________ percent. (A) 70 (B) 55(C) 80 (D) 94

Description : Carbon content of pitch (residue of coal tar distillation) is around __________ percent. (A) 70 (B) 55 (C) 80 (D) 94

Last Answer : (D) 94

High speed cutting tool steels contain about __________ percent of tungsten. (A) 6-8 (B) 18-20 (C) 30-35 (D) 50-55

Description : High speed cutting tool steels contain about __________ percent of tungsten. (A) 6-8 (B) 18-20 (C) 30-35 (D) 50-55

Last Answer : (B) 18-20

Tar yield in the low temperature and high temperature carbonisation of dry coal may be respectively __________ percent. (A) 3 & 10 (B) 10 & 3 (C) 10 & 20 (D) 15 & 8

Description : Tar yield in the low temperature and high temperature carbonisation of dry coal may be respectively __________ percent. (A) 3 & 10 (B) 10 & 3 (C) 10 & 20 (D) 15 & 8

Last Answer : (B) 10 & 3

Can anyone help me with this? Chlorine and carbon monoxide gases are mixed in a 1.00L container and the following equilibrium is established: CO(g) + Cl2(g) <--> COCl2(g).. Initially 1.5 mol of chlorine was present with excess carbon monoxide. At equilibrium, 0.8 mol of COCl2(g) was found. How do you calculate the percent reaction?

Description : Can anyone help me with this? Chlorine and carbon monoxide gases are mixed in a 1.00L container and the following equilibrium is established: CO(g) + Cl2(g) COCl2(g).. Initially 1.5 mol of ... monoxide. At equilibrium, 0.8 mol of COCl2(g) was found. How do you calculate the percent reaction?

Last Answer : For a start, your equation isn't balanced; it should be Cl2 (Cl2, not 2Cl, because of HONClBrIF). Given this, if we assume the reaction goes to completion, 1.5 mol Cl2 will produce 1.5 mol ... .3% Incidentally, is that supposed to be CO or Co? It has no effect on the calculation, just curious.

Stainless steel contains which of the following? (a) Aluminium and Zinc (b) Chromium and Carbon (c) Zinc and Mercury (d) Copper and Cadmium

Description : Stainless steel contains which of the following? (a) Aluminium and Zinc (b) Chromium and Carbon (c) Zinc and Mercury (d) Copper and Cadmium

Last Answer : Ans:(b)

Mild steel is (A) A low carbon steel (0.05 to 0.3% carbon) (B) Highly resistant to corrosion (as much as stainless steel) (C) A high carbon steel (0.5 to 1.5% carbon) (D) Very poor in strength & ductility

Description : Mild steel is (A) A low carbon steel (0.05 to 0.3% carbon) (B) Highly resistant to corrosion (as much as stainless steel) (C) A high carbon steel (0.5 to 1.5% carbon) (D) Very poor in strength & ductility

Last Answer : (A) A low carbon steel (0.05 to 0.3% carbon)

The yield of tar from high temperature carbonisation of dry coal is about __________ percent. (A) 3 (B) 12 (C) 22 (D) 0.3

Description : The yield of tar from high temperature carbonisation of dry coal is about __________ percent. (A) 3 (B) 12 (C) 22 (D) 0.3

Last Answer : (A) 3

Most common stainless steel type 316, which is highly resistant to corrosion contains (A) 16-13% Cr 10-14% Ni and 2-3% Mo (B) 20-22% Cr, and 8-10% Ni (C) 2-4% Cr, 22% NI and 2-4% Mo (D) None of these

Description : Most common stainless steel type 316, which is highly resistant to corrosion contains (A) 16-13% Cr 10-14% Ni and 2-3% Mo (B) 20-22% Cr, and 8-10% Ni (C) 2-4% Cr, 22% NI and 2-4% Mo (D) None of these

Last Answer : (A) 16-13% Cr 10-14% Ni and 2-3% Mo

18/8 stainless steel means, that it contains (A) 18% chromium and 8% nickel (B) 18% chromium and 8% molybdenum (C) 18% nickel and 8% chromium (D) 18% molybdenum and 8% chromium

Description : 18/8 stainless steel means, that it contains (A) 18% chromium and 8% nickel (B) 18% chromium and 8% molybdenum (C) 18% nickel and 8% chromium (D) 18% molybdenum and 8% chromium

Last Answer : (A) 18% chromium and 8% nickel